dev-tcltk/tclxml-expat-2.4 depends on dev-tcltk/tclxml-2.4 (=dev-tcltk/tclxml-${PV}* in DEPEND). Latest unmasked version of dev-tcltk/tclxml is 2.6 and vesion of dev-tcltk/tclxml-expat is 2.4. Everytime I run something like `emerge --sync && emerge -pvDu world' I see the following: [ebuild UD] dev-tcltk/tclxml-2.4 [2.6] 0 kB or [ebuild U ] dev-tcltk/tclxml-2.6 [2.4] 0 kB So I think dev-tcltk/tclxml-2.6 should be masked or dev-tcltk/tclxml-expat-2.6 should be unmasked. Reproducible: Always Steps to Reproduce: 1. emerge dev-tcltk/tclxml-expat 2. emerge -pv dev-tcltk/tclxml Actual Results: [ebuild U ] dev-tcltk/tclxml-2.6 [2.4] 0 kB Expected Results: [ebuild R ] dev-tcltk/tclxml-2.4 0 kB
Has this bug never been fixed? Or did it just reappear?
The problem is even worse because the latest stable version of tcldom (2.6) _needs_ tclxml-2.6 but the latest stable version of tclxml-expat (2.4) _needs_ tclxl-2.4. And tclxml-expat-2.6 is masked via the -x86 keyword.
@x86 - any reason why is >=dev-tcltk/tclxml-expat marked -x86? And why are those versions in portage at all, they have no useful keywords???
(In reply to comment #3) > @x86 - any reason why is >=dev-tcltk/tclxml-expat marked -x86? Sigh, I meant >=dev-tcltk/tclxml-expat-2.5
I'm not sure when this syntax error appeared, but I'll report it here... checking system version (for dynamic loading)... ./configure: line 4706: syntax error near unexpected token `(' ./configure: line 4706: ` case `(ac_space=' '; set | grep ac_space) 2>&1` in' !!! Please attach the following file when filing a report to bugs.gentoo.org: !!! /var/tmp/portage/tclxml-2.4/work/tclxml-2.4/config.log !!! ERROR: dev-tcltk/tclxml-2.4 failed. Call stack: ebuild.sh, line 1545: Called dyn_compile ebuild.sh, line 940: Called src_compile tclxml-2.4.ebuild, line 16: Called econf ebuild.sh, line 541: Called die !!! econf failed !!! If you need support, post the topmost build error, and the call stack if relevant.
(In reply to comment #5) > I'm not sure when this syntax error appeared, but I'll report it here... Because you need 2.6 for current stable bash.
ah, the reason for this currently is that tclxml-expat fails to configure with an ac_space=' '; set; grep ac_space 2>&1 in blah blah I've looked into it a little bit but haven't had the time to really dedicate to why the heck its actually failing. More of a update about whats going on here then a solution unfortunately. I can't take tclxml back to ~x86 as a stable moodss depends on the newer version...so it'll be here for a bit longer but it isn't forgotten.
I want to remove dev-tcltk/tclxml-expat from portage tree because tclxml with USE flag can cover it.>=dev-tcltk/tclxml-3.0 had added expat USE flag already. tclxml-expat is used only by net-im/tkabber and >=dev-tcltk/tkabber-0.9.8 depends tclxml with USE flag. Please mark stable >=dev-tcltk/tkabber-0.9.8.
and also >=dev-tcltk/tclxml-3.0 have to mark stable...
mistake
(In reply to comment #8) > Please mark stable >=dev-tcltk/tkabber-0.9.8. (In reply to comment #9) > and also >=dev-tcltk/tclxml-3.0 have to mark stable... Well, this won't get much progress if you don't CC the arches... Doing so now.
tkabber doesn't really work for me, but does seem to be related to X server interaction, rather than a tclxml issue: ticho@hiker ~ $ tkabber X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 1 (X_CreateWindow) Value in failed request: 0x38 Serial number of failed request: 349 Current serial number in output stream: 351
Created attachment 96761 [details] emerge -va1 =dev-tcltk/tclxml-3.0-r1 dev-tcltk/tclxml-3.0-r1 USE="expat xml -threads": 1) emerges 2) fails tests (hence I've attached a log) 3) passes collision-protect net-im/tkabber-0.9.8 USE="ssl -crypt": 1) emerges fine 2) passes collision-protect 3) does not work (not really sure what to do) $ tkabber Application initialization failed: this isn't a Tk applicationunknown color name "Black" Error in startup script: this isn't a Tk applicationunknown color name "Black" (default value for "-highlightcolor" in widget ".") invoked from within "load /usr/lib/tk8.4/../libtk8.4.so Tk" ("package ifneeded" script) invoked from within "package require Tk 8.1.1" ("package ifneeded" script) invoked from within "package require BWidget" (file "/usr/share/tkabber/tkabber.tcl" line 53) Portage 2.1.1 (default-linux/x86/2006.1/desktop, gcc-4.1.1, glibc-2.4-r3, 2.6.17-suspend2-r5 i686) ================================================================= System uname: 2.6.17-suspend2-r5 i686 Intel(R) Pentium(R) M processor 1600MHz Gentoo Base System version 1.12.4 Last Sync: Mon, 11 Sep 2006 00:00:01 +0000 app-admin/eselect-compiler: [Not Present] dev-lang/python: 2.4.3-r1 dev-python/pycrypto: 2.0.1-r5 dev-util/ccache: [Not Present] dev-util/confcache: [Not Present] sys-apps/sandbox: 1.2.17 sys-devel/autoconf: 2.13, 2.59-r7 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2 sys-devel/binutils: 2.16.1-r3 sys-devel/gcc-config: 1.3.13-r3 sys-devel/libtool: 1.5.22 virtual/os-headers: 2.6.11-r5 ACCEPT_KEYWORDS="x86" AUTOCLEAN="yes" CBUILD="i686-pc-linux-gnu" CFLAGS="-march=pentium-m -Os -pipe" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/X11/xkb /usr/share/config /usr/share/texmf/dvipdfm/config/ /usr/share/texmf/dvips/config/ /usr/share/texmf/tex/generic/config/ /usr/share/texmf/tex/platex/config/ /usr/share/texmf/xdvi/" CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/gconf /etc/java-config/vms/ /etc/revdep-rebuild /etc/splash /etc/terminfo" CXXFLAGS="-march=pentium-m -Os -pipe" DISTDIR="/opt/distfiles" FEATURES="autoconfig buildpkg collision-protect distlocks fixpackages metadata-transfer parallel-fetch sandbox sfperms splitdebug strict test userfetch" GENTOO_MIRRORS="http://mirror.uni-c.dk/pub/gentoo http://ftp.belnet.be/mirror/rsync.gentoo.org/gentoo" LC_ALL="en_GB.utf8" LINGUAS="da en en_GB" MAKEOPTS="-j2" PKGDIR="/opt/packages" PORTAGE_RSYNC_EXTRA_OPTS="--timeout=60" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude='/distfiles' --exclude='/local' --exclude='/packages'" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://zlin.dk/gentoo-portage" USE="x86 X aac acpi alsa asf avi bash-completion berkdb bitmap-fonts bluetooth bzip2 cairo cdr cli crypt css cups dlloader dri dvd dvdr elibc_glibc emboss encode fam fat fbcon ffmpeg firefox flac fortran gdbm gif gphoto2 gpm i8x0 ieee1394 imagemagick input_devices_evdev input_devices_keyboard input_devices_mouse input_devices_synaptics input_devices_void irda irmc isdnlog jfs jpeg kde kdehiddenvisibility kernel_linux libg++ linguas_da linguas_en linguas_en_GB logitech-mouse mad mikmod mmx mmxext mp3 mpeg mplayer msn ncurses nls nptl nptlonly nsplugin ntfs ogg opengl pam pcre pdf pdflib perl png ppds pppd python qt3 quicktime readline real reflection reiser4 reiserfs scanner sdl session slp spell spl sse sse2 ssl subversion svg svga syslog tcpd tetex tiff truetype truetype-fonts type1-fonts udev unicode usb userland_GNU vcd video_cards_fbdev video_cards_fglrx video_cards_i810 video_cards_radeon video_cards_vesa vorbis wifi win32codecs xcomposite xfs xine xml xorg xscreensaver xv xvid zlib" Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LDFLAGS
Also if I enable the crypt use flag for net-im/tkabber-0.9.8 I run into bug #69489 (which I cannot reopen).
(In reply to comment #13) > 3) does not work (not really sure what to do) > > $ tkabber > Application initialization failed: this isn't a Tk applicationunknown color > name "Black" > Error in startup script: this isn't a Tk applicationunknown color name "Black" Looks like you have wrong RgbPath in xorg.conf, just comment it out or remove it.
(In reply to comment #15) > Looks like you have wrong RgbPath in xorg.conf, just comment it out or remove > it. Right. So now it starts alright. I continue to be amazed at how ugly this thing is.. It may be just me again but it still fails to login with the following error message: "Authentication failed: Request Error (JID Malformed)". This with a login which works with any other Jabber client I've tried so far. Other than that is seems to work. *gg*
Ok, how about the error I get, then? Note that I have no issues with other applications running in my X.
x86 GCC 4.1 both USE="ssl crypt" tkabber-0.9.8 and USE="expat" tclxml-3.0-r1 1) emerges fine 2) passes collision tests 3) work Portage 2.1-r2 (default-linux/x86/2006.1/desktop, gcc-4.1.1, glibc-2.3.6-r4, 2.6.17-gentoo-r4 i686) ================================================================= System uname: 2.6.17-gentoo-r4 i686 Intel(R) Celeron(R) M processor 1.50GHz Gentoo Base System version 1.12.4 app-admin/eselect-compiler: [Not Present] dev-java/java-config: [Not Present] dev-lang/python: 2.4.3-r1 dev-python/pycrypto: 2.0.1-r5 dev-util/ccache: [Not Present] dev-util/confcache: [Not Present] sys-apps/sandbox: 1.2.17 sys-devel/autoconf: 2.13, 2.59-r7 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2 sys-devel/binutils: 2.16.1-r3 sys-devel/gcc-config: 1.3.13-r3 sys-devel/libtool: 1.5.22 virtual/os-headers: 2.6.11-r2 ACCEPT_KEYWORDS="x86" AUTOCLEAN="yes" CBUILD="i686-pc-linux-gnu" CFLAGS="-Os -mcpu=i686 -pipe" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/3.4/env /usr/kde/3.4/share/config /usr/kde/3.4/shutdown /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/lib/mozilla/defaults/pref /usr/share/X11/xkb /usr/share/config /usr/share/texmf/dvipdfm/config/ /usr/share/texmf/dvips/config/ /usr/share/texmf/tex/generic/config/ /usr/share/texmf/tex/platex/config/ /usr/share/texmf/xdvi/ /usr/spool/PBS /var/bind" CONFIG_PROTECT_MASK="/etc/env.d /etc/gconf /etc/splash /etc/terminfo" CXXFLAGS="-Os -mcpu=i686 -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="autoconfig ccache collision-protect distlocks metadata-transfer parallel-fetch sandbox sfperms strict" GENTOO_MIRRORS="http://mirror.datapipe.net/gentoo ftp://ftp.gtlib.cc.gatech.edu/pub/gentoo http://mirror.datapipe.net/gentoo http://open-systems.ufl.edu/mirrors/gentoo" LINGUAS="es" PKGDIR="/usr/portage/packages" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude='/distfiles' --exclude='/local' --exclude='/packages'" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="x86 X alsa arts berkdb bitmap-fonts cairo cdr cli crypt cups dbus dlloader dri dvd dvdr eds emboss encode esd fam firefox fortran gdbm gif gnome gpm gstreamer gtk hal ipv6 isdnlog jpeg kde ldap libg++ mad mikmod mp3 mpeg ncurses nls nptl nptlonly ogg opengl oss pam pcre perl png ppds pppd python qt3 qt4 quicktime readline reflection sdl session spell spl ssl tcpd truetype truetype-fonts type1-fonts udev unicode vorbis win32codecs xml xorg xv zlib elibc_glibc input_devices_mouse input_devices_keyboard input_devices_synaptics kernel_linux linguas_es userland_GNU video_cards_i915 video_cards_i810 video_cards_i830 video_cards_vesa video_cards_fbdev" Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, LDFLAGS, MAKEOPTS, PORTAGE_RSYNC_EXTRA_OPTS
*** Bug 149261 has been marked as a duplicate of this bug. ***
*** Bug 152342 has been marked as a duplicate of this bug. ***
*** Bug 153241 has been marked as a duplicate of this bug. ***
(In reply to comment #16) > Right. So now it starts alright. I continue to be amazed at how ugly this thing > is.. It may be just me again but it still fails to login with the following > error message: "Authentication failed: Request Error (JID Malformed)". This > with a login which works with any other Jabber client I've tried so far. Other > than that is seems to work. *gg* > Can you test w/ tkabber-0.9.9?
Changed summary. target date for tkabber stabilisation is 29th November 2006 (30 days in Portage then). kloeri,Ticho, please test with the 0.9.9 version if your issues go away.
tclxml-expat fails here now: >>> Emerging (1 of 7) dev-tcltk/tclxml-expat-2.4 to / >>> Downloading 'http://gentoo.ynet.sk/pub/distfiles/tclxml-2.4.tar.gz' --20:18:07-- http://gentoo.ynet.sk/pub/distfiles/tclxml-2.4.tar.gz => `/usr/gentoo/distfiles/tclxml-2.4.tar.gz' Resolving gentoo.ynet.sk... 147.175.168.35 Connecting to gentoo.ynet.sk|147.175.168.35|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 405,119 (396K) [application/x-gzip] 100%[====================================>] 405,119 192.95K/s 20:18:09 (192.24 KB/s) - `/usr/gentoo/distfiles/tclxml-2.4.tar.gz' saved [405119/405119] * checking ebuild checksums ;-) ... [ ok ] * checking auxfile checksums ;-) ... [ ok ] * checking miscfile checksums ;-) ... [ ok ] * checking tclxml-2.4.tar.gz ;-) ... [ ok ] >>> Unpacking source... >>> Unpacking tclxml-2.4.tar.gz to /var/tmp/portage/portage/dev-tcltk/tclxml-expat-2.4/work >>> Source unpacked. >>> Compiling source in /var/tmp/portage/portage/dev-tcltk/tclxml-expat-2.4/work/tclxml-2.4/expat ... /usr/bin/confcache --confcache-ignore /var/tmp/portage/ccache:/var/tmp/distcc --confcache-dir /var/tmp/portage/confcache ./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --with-tcl=/usr/lib --with-Tclxml=/usr/lib --build=i686-pc-linux-gnu loading cache config.cache checking for correct TEA configuration... ok checking for Tcl configuration... found /usr/lib/tclConfig.sh checking for existence of /usr/lib/tclConfig.sh... loading checking for Cygwin environment... no checking for mingw32 environment... no checking for gcc... (cached) i686-pc-linux-gnu-gcc checking whether the C compiler (i686-pc-linux-gnu-gcc -O2 -march=pentium-m -pipe ) works... yes checking whether the C compiler (i686-pc-linux-gnu-gcc -O2 -march=pentium-m -pipe ) is a cross-compiler... no checking whether we are using GNU C... yes checking whether i686-pc-linux-gnu-gcc accepts -g... (cached) yes checking if the compiler understands -pipe... yes checking for a BSD compatible install... (cached) /bin/install -c checking whether make sets ${MAKE}... yes checking for ranlib... (cached) i686-pc-linux-gnu-ranlib checking for object suffix... (cached) o checking for executable suffix... no checking for Tclxml configuration... found /usr/lib/TclxmlConfig.sh checking for existence of /usr/lib/TclxmlConfig.sh... loading checking for Tcl public headers... /usr/include checking for building with threads... no (default) checking how to build libraries... shared checking how to run the C preprocessor... (cached) i686-pc-linux-gnu-gcc -E checking if 64bit support is enabled... no checking if 64bit Sparc VIS support is requested... no checking system version (for dynamic loading)... ./configure: line 4524: syntax error near unexpected token `(' ./configure: line 4524: ` case `(ac_space=' '; set | grep ac_space) 2>&1` in' !!! Please attach the following file when filing a report to bugs.gentoo.org: !!! /var/tmp/portage/portage/dev-tcltk/tclxml-expat-2.4/work/tclxml-2.4/expat/config.log !!! ERROR: dev-tcltk/tclxml-expat-2.4 failed. Call stack: ebuild.sh, line 1568: Called dyn_compile ebuild.sh, line 937: Called src_compile tclxml-expat-2.4.ebuild, line 20: Called econf '--with-tcl=/usr/lib' '--with-Tclxml=/usr/lib' ebuild.sh, line 540: Called die
(In reply to comment #24) No offence, but did you really read this bug, esp. Comment #8? So again, could someone please test and eventually stabilize: >=dev-tcltk/tclxml-3.0 dev-tcltk/tkabber-0.9.9.
Yep, my fault. Anyway: ticho@hiker ~ $ tkabber X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 1 (X_CreateWindow) Value in failed request: 0x10 Serial number of failed request: 349 Current serial number in output stream: 351 ticho@hiker ~ $ tkabber-0.9.9 doesn't work here either. Can't test previous stable, since tclxml-expat does not build.
dev-tcltk/tclxml-3.0-r1 USE="expat xml -threads" 1. emerges on x86 2. passes collision test 3. fails test suite (more or less all tests fail) 4. tkabber emerges with it net-im/tkabber-0.9.8 USE="crypt ssl" 1. emerges on x86 2. passes collision test 3. works Portage 2.1.1-r1 (default-linux/x86/2006.1/desktop, gcc-4.1.1, glibc-2.4-r3, 2.6.17.13 i686) ================================================================= System uname: 2.6.17.13 i686 AMD Athlon(TM) XP1800+ Gentoo Base System version 1.12.6 Last Sync: Mon, 06 Nov 2006 13:50:01 +0000 ccache version 2.3 [enabled] app-admin/eselect-compiler: [Not Present] dev-java/java-config: 1.3.7, 2.0.30 dev-lang/python: 2.3.5-r3, 2.4.3-r4 dev-python/pycrypto: 2.0.1-r5 dev-util/ccache: 2.3 dev-util/confcache: [Not Present] sys-apps/sandbox: 1.2.17 sys-devel/autoconf: 2.13, 2.60 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2 sys-devel/binutils: 2.16.1-r3 sys-devel/gcc-config: 1.3.13-r4 sys-devel/libtool: 1.5.22 virtual/os-headers: 2.6.17-r1 ACCEPT_KEYWORDS="x86" AUTOCLEAN="yes" CBUILD="i686-pc-linux-gnu" CFLAGS="-O2 -march=i686 -fomit-frame-pointer -pipe" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/X11/xkb /usr/share/config /usr/share/texmf/dvipdfm/config/ /usr/share/texmf/dvips/config/ /usr/share/texmf/tex/generic/config/ /usr/share/texmf/tex/platex/config/ /usr/share/texmf/xdvi/" CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/gconf /etc/java-config/vms/ /etc/revdep-rebuild /etc/terminfo" CXXFLAGS="-O2 -march=i686 -fomit-frame-pointer -pipe" DISTDIR="/usr/portage/distfiles" EMERGE_DEFAULT_OPTS="--nospinner" FEATURES="autoconfig ccache collision-protect distlocks fixpackages metadata-transfer parallel-fetch sandbox sfperms strict test userfetch userpriv usersandbox" GENTOO_MIRRORS="http://mirror.switch.ch/mirror/gentoo/ http://gentoo.inode.at/" LANG="en_GB.utf8" LINGUAS="en de en_GB" PKGDIR="/usr/portage/packages" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude='/distfiles' --exclude='/local' --exclude='/packages'" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage/normal" SYNC="rsync://192.168.2.1/gentoo-portage" USE="x86 3dnow 3dnowext X a52 aac acpi alsa apache2 bash-completion berkdb bitmap-fonts bzip2 cairo cdr cli cracklib crypt css cups dbus divx4linux dlloader dri dts dvd dvdr dvdread elibc_glibc emboss exif fam ffmpeg firefox font-server fortran gdbm gif gnome gphoto2 gpm gstreamer gtk gtk2 gtkhtml hal iconv input_devices_keyboard input_devices_mouse ipv6 isdnlog java jpeg kde kernel_linux ldap libclamav libg++ linguas_de linguas_en linguas_en_GB logitech-mouse mad mikmod mmx mmxext mono mozcalendar mozdevelop mozsvg mp3 mpeg ncurses network nls nptl nptlonly nvidia oav ogg opengl oss pam pcre perl png ppds pppd python qt qt3 qt4 quicktime readline reflection samba sdl seamonkey session spell spl ssl tcltk tcpd test tetex tiff truetype truetype-fonts type1-fonts udev unicode usb userland_GNU vcd video_cards_none video_cards_nv vorbis win32codecs xine xinerama xml xorg xorg-x11 xprint xv xvg xvid zlib" Unset: CTARGET, INSTALL_MASK, LC_ALL, LDFLAGS, MAKEOPTS, PORTAGE_RSYNC_EXTRA_OPTS
tkabber-0.9.9 works perfectly fine here on amd64. Please stabilize also for amd64. Tested for 1 day (0.9.7 worked fine for ~1 year before). $ emerge --info Portage 2.1.1-r1 (default-linux/amd64/2006.0, gcc-3.4.6, glibc-2.4-r3, 2.6.17-gentoo-r8 x86_64) ================================================================= System uname: 2.6.17-gentoo-r8 x86_64 AMD Athlon(tm) 64 Processor 3200+ Gentoo Base System version 1.12.4 Last Sync: Sat, 04 Nov 2006 16:30:01 +0000 app-admin/eselect-compiler: [Not Present] dev-java/java-config: 1.2.11-r1 dev-lang/python: 2.4.3-r1 dev-python/pycrypto: 2.0.1-r5 dev-util/ccache: [Not Present] dev-util/confcache: [Not Present] sys-apps/sandbox: 1.2.17 sys-devel/autoconf: 2.13, 2.59-r7 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2 sys-devel/binutils: 2.16.1-r3 sys-devel/gcc-config: 1.3.13-r3 sys-devel/libtool: 1.5.22 virtual/os-headers: 2.6.11-r2 ACCEPT_KEYWORDS="amd64" AUTOCLEAN="yes" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-O2 -march=athlon64 -fomit-frame-pointer -fweb -pipe" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/X11/xkb /usr/share/config" CONFIG_PROTECT_MASK="/etc/env.d /etc/gconf /etc/revdep-rebuild /etc/splash /etc/terminfo" CXXFLAGS="-O2 -march=athlon64 -fomit-frame-pointer -fweb -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="autoconfig distlocks metadata-transfer sandbox sfperms strict" GENTOO_MIRRORS="http://ftp.belnet.be/mirror/rsync.gentoo.org/gentoo http://distfiles.gentoo.org http://www.ibiblio.org/pub/Linux/distributions/gentoo" LINGUAS="en sk cs ru" MAKEOPTS="-j2" PKGDIR="/usr/portage/packages" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude='/distfiles' --exclude='/local' --exclude='/packages'" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/opt/reserve/install/portage/hs" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="amd64 3dnowex 7zip X Xaw3d a52 aac aalib acpi aim alsa bash-completion bdf berkdb bitmap-fonts bluetooth bzip2 bzlib cairo caps cdparanoia cdr cli cracklib crypt css cups dga dlloader dri dts dv dvd dvdr editor edl elibc_glibc emacs emboss encode ethereal exif fbcon ffmpeg firefox flac flash font-server foomaticdb fortran ftp gdbm gif gimpprint gphoto2 gpm gs gtk gtk2 gtkhtml guile iconv icq imagemagick imap imlib input_devices_evdev input_devices_keyboard input_devices_mouse ipv6 isdnlog jabber jack jbig jpeg jpeg2k kernel_linux ladcca lcms leim libcaca linguas_cs linguas_en linguas_ru linguas_sk lirc lirc_devices_serial live lm_sensors lzw lzw-tiff mad maildir matroska memlimit mikmod mime mng modplug motif mozsvg mp3 mpeg mplayer msn mule musepack musicbrainz ncurses network new-login nls nocd nowin nptl nptlonly nvidia ofx ogg oggvorbis openal opengl oscar oss pam pcre pda pdf perl png pnp portaudio ppds pppd python qt qt3 qt4 quicktime rar readline recode reflection rtc samba sasl sdl server session snmp sockets sox speex spell spl ssl subtitles svg tabs tcl tcltk tcpd teamarena theora threads tiff tk truetype truetype-fonts type1-fonts udev unicode usb userland_GNU userlocales vcd video_cards_fbdev video_cards_nv video_cards_nvidia video_cards_vesa vorbis wma wmf wxgtk1 wxwindows x264 xface xml xorg xosd xpm xscreensaver xv xvid xvmc yahoo zlib" Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, LDFLAGS, PORTAGE_RSYNC_EXTRA_OPTS
tkabber-0.9.9 seems to work fine for me too. Portage 2.1.1-r2 (default-linux/x86/2006.1/desktop, gcc-4.1.1, glibc-2.4-r4, 2.6.18-gentoo-r2 i686) ================================================================= System uname: 2.6.18-gentoo-r2 i686 Intel(R) Pentium(R) M processor 1600MHz Gentoo Base System version 1.12.6 Last Sync: Sat, 18 Nov 2006 23:30:01 +0000 app-admin/eselect-compiler: [Not Present] dev-java/java-config: 1.3.7, 2.0.30 dev-lang/python: 2.4.3-r4 dev-python/pycrypto: 2.0.1-r5 dev-util/ccache: [Not Present] dev-util/confcache: [Not Present] sys-apps/sandbox: 1.2.17 sys-devel/autoconf: 2.13, 2.60 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2 sys-devel/binutils: 2.16.1-r3 sys-devel/gcc-config: 1.3.13-r4 sys-devel/libtool: 1.5.22 virtual/os-headers: 2.6.17-r1 ACCEPT_KEYWORDS="x86" AUTOCLEAN="yes" CBUILD="i686-pc-linux-gnu" CFLAGS="-march=pentium-m -Os -pipe" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/X11/xkb /usr/share/config" CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/gconf /etc/java-config/vms/ /etc/revdep-rebuild /etc/terminfo /etc/texmf/web2c" CXXFLAGS="-march=pentium-m -Os -pipe" DISTDIR="/opt/distfiles" FEATURES="autoconfig buildpkg ccache collision-protect distlocks fixpackages metadata-transfer parallel-fetch sandbox sfperms splitdebug strict test userfetch" GENTOO_MIRRORS="ftp://192.168.241.1 http://mirror.uni-c.dk/pub/gentoo http://ftp.belnet.be/mirror/rsync.gentoo.org/gentoo" LINGUAS="da en en_GB" MAKEOPTS="-j2" PKGDIR="/opt/packages" PORTAGE_RSYNC_EXTRA_OPTS="--timeout=60" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude='/distfiles' --exclude='/local' --exclude='/packages'" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://zlin.dk/gentoo-portage" USE="x86 X aac acpi aiglx alsa asf avahi bash-completion berkdb bitmap-fonts bluetooth branding bzip2 cairo cdr cli cracklib crypt css cups dlloader dri dvd dvdr elibc_glibc emboss encode fam fat fbcon ffmpeg firefox flac fortran gdbm gif gnokii gnome gphoto2 gpm gtk2 hal i8x0 iconv ieee1394 imagemagick input_devices_evdev input_devices_keyboard input_devices_mouse input_devices_synaptics input_devices_void irda irmc isdnlog jfs jpeg kcal kde kdehiddenvisibility kernel_linux lcd libg++ linguas_da linguas_en linguas_en_GB lm_sensors logitech-mouse mad mikmod mmx mmxext mp3 mpeg mplayer msn musicbrainz ncurses network nls nptl nptlonly nsplugin ntfs ogg opengl pam pcre pdf perl png ppds pppd python qt3 quicktime rdesktop readline real reflection reiser4 reiserfs ruby scanner sdl session slp sms spell spl sse sse2 ssl subversion svg svga syslog tcpd test tetex tiff truetype truetype-fonts type1-fonts udev unicode usb userland_GNU vcd video_cards_fbdev video_cards_i810 video_cards_radeon video_cards_vesa video_cards_vmware vim vorbis wifi win32codecs xcomposite xfs xine xml xorg xscreensaver xv xvid zlib" Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, LDFLAGS
On the very special request of a certain bugwrangler amd64 tested this without even being on CC (we're getting better these days). Some dependencies also need to be stabilized for amd64: dev-tcltk/tclgpgme-1.0-r2 dev-tcltk/tkXwin-1.0-r1 dev-tcltk/tkTheme-1.0-r1 The last two each have an open bug about missing dependencies, adding these as blockers. Once this is done tkabber emerges fine and works for me. Portage 2.1.1-r2 (default-linux/amd64/2006.1/desktop, gcc-4.1.1, glibc-2.4-r4, 2.6.18-suspend2-Dudebox-Edition x86_64) ================================================================= System uname: 2.6.18-suspend2-Dudebox-Edition x86_64 AMD Athlon(tm) 64 Processor 3200+ Gentoo Base System version 1.12.6 Last Sync: Thu, 23 Nov 2006 05:00:01 +0000 distcc 2.18.3 x86_64-pc-linux-gnu (protocols 1 and 2) (default port 3632) [enabled] ccache version 2.3 [enabled] app-admin/eselect-compiler: [Not Present] dev-java/java-config: 1.3.7, 2.0.30 dev-lang/python: 2.4.3-r4 dev-python/pycrypto: 2.0.1-r5 dev-util/ccache: 2.3 dev-util/confcache: [Not Present] sys-apps/sandbox: 1.2.17 sys-devel/autoconf: 2.13, 2.60 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2 sys-devel/binutils: 2.16.1-r3 sys-devel/gcc-config: 1.3.13-r4 sys-devel/libtool: 1.5.22 virtual/os-headers: 2.6.11-r2 ACCEPT_KEYWORDS="amd64" AUTOCLEAN="yes" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=k8 -msse3 -Os -pipe" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/X11/xkb /usr/share/config /var/qmail/alias /var/qmail/control" CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/gconf /etc/java-config/vms/ /etc/revdep-rebuild /etc/terminfo /etc/texmf/web2c" CXXFLAGS="-march=k8 -msse3 -Os -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="autoconfig ccache collision-protect distcc distlocks metadata-transfer multilib-strict parallel-fetch sandbox sfperms strict test" GENTOO_MIRRORS="http://mirrors.sec.informatik.tu-darmstadt.de/gentoo/ ftp://linux.rz.ruhr-uni-bochum.de/gentoo-mirror/ ftp:///ftp-stud.fht-esslingen.de/pub/Mirrors/gentoo/" LDFLAGS="-Wl,-O1" MAKEOPTS="-j4" PKGDIR="/usr/portage/packages" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude='/distfiles' --exclude='/local' --exclude='/packages'" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage_overlay" SYNC="rsync://server/gentoo-portage" USE="amd64 X alsa apache2 berkdb bitmap-fonts cairo cdr cli cracklib crypt cups dbus dlloader dri dvd dvdr eds elibc_glibc emboss encode esd fam firefox fortran gcj gdbm gif gpm gstreamer gtk gtk2 hal iconv imap input_devices_keyboard input_devices_mouse isdnlog jpeg kde kdeenablefinal kdehiddenvisibility kernel_linux libg++ mad mikmod mp3 mpeg mysql ncurses nls nptl nptlonly objc objc++ ogg oss pam pcre perl png ppds pppd python qt3 quicktime readline reflection sdl session spell spl sqlite ssl tcpd test truetype truetype-fonts type1-fonts udev unicode userland_GNU video_cards_radeon vorbis xml xorg xv zlib" Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, LINGUAS, PORTAGE_RSYNC_EXTRA_OPTS
x86 done
We go.
amd64 does not need a stable version here.
(In reply to comment #33) > amd64 does not need a stable version here. Why? I don't understand. tkabber-0.9.9 is in testing and works fine so it should be stabilized.
*** Bug 173792 has been marked as a duplicate of this bug. ***
alpha stable. Closing.
