I emerged net-dialup/fcdsl-2.6.20.7 and it installed fine. drdsl -n shows the right values capiiinit works pppd call peer establishes internet connection ping www.heise.de and ping www.google.de work fine when I start emerge -f opera it begins to download the needed files but suddenly after a few seconds or a minute the system freezes totally and rebooting is needed. Kernel : Gentoo-dev 2.6.10-r1 but the same happened with Gentoo Dev 2.6.9-r13 Window Manger : enlightenment-0.16.7.1 config-kernel-0.3.3 had to be used to emerge fcdsl option was allow_writable=yes Reproducible: Always Steps to Reproduce: 1. emerge fcdsl and setup config files and peer file 2. pppd call arcor <- name of the peer 3. emerge opera <- or any other ebuild Actual Results: System freezes after some seconds or a minute and a reboot is needed Expected Results: Download opera and emerge it so dont have to reboot to Suse linux my last emerge information: 104970257: *** emerge fcdsl 1104970259: >>> emerge (1 of 1) net-dialup/fcdsl-2.6.20.7 to / 1104970259: === (1 of 1) Cleaning (net-dialup/fcdsl-2.6.20.7::/usr/portage/net-dialup/fcdsl/fcdsl-2.6.20.7.ebuild) 1104970259: === (1 of 1) Compiling/Merging (net-dialup/fcdsl-2.6.20.7::/usr/portage/net-dialup/fcdsl/fcdsl-2.6.20.7.ebuild) 1104970286: === (1 of 1) Updating world file (net-dialup/fcdsl-2.6.20.7) 1104970286: === (1 of 1) Post-Build Cleaning (net-dialup/fcdsl-2.6.20.7::/usr/portage/net-dialup/fcdsl/fcdsl-2.6.20.7.ebuild) 1104970287: >>> AUTOCLEAN: net-dialup/fcdsl 1104970287: --- AUTOCLEAN: Nothing unmerged. 1104970287: ::: completed emerge (1 of 1) net-dialup/fcdsl-2.6.20.7 to / 1104970287: *** Finished. Cleaning up... 1104970289: *** exiting successfully. 1104970289: *** terminating. 1104971284: Started emerge on: Jan 06, 2005 01:28:04 1104971284: *** emerge --fetchonly opera 1104971285: >>> emerge (1 of 4) x11-libs/openmotif-2.1.30-r5 to / 1104971362: >>> emerge (2 of 4) net-print/cups-1.1.23_rc1 to / Here the System freezes my last System Messages: an 6 01:07:46 bigwhoop syslog-ng[5908]: syslog-ng version 1.6.5 going down Jan 6 01:08:28 bigwhoop syslog-ng[6035]: syslog-ng version 1.6.5 starting Jan 6 01:08:28 bigwhoop syslog-ng[6035]: Changing permissions on special file /dev/tty12 Jan 6 01:08:28 bigwhoop Linux version 2.6.10-gentoo-r1 (root@bigwhoop) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #1 Thu Jan 6 01:06:03 CET 2005 Jan 6 01:08:28 bigwhoop BIOS-provided physical RAM map: Jan 6 01:08:28 bigwhoop BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Jan 6 01:08:28 bigwhoop BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Jan 6 01:08:28 bigwhoop BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Jan 6 01:08:28 bigwhoop BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) Jan 6 01:08:28 bigwhoop BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) Jan 6 01:08:28 bigwhoop BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) Jan 6 01:08:28 bigwhoop BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Jan 6 01:08:28 bigwhoop BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jan 6 01:08:28 bigwhoop BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Jan 6 01:08:28 bigwhoop 127MB HIGHMEM available. Jan 6 01:08:28 bigwhoop 896MB LOWMEM available. Jan 6 01:08:28 bigwhoop On node 0 totalpages: 262128 Jan 6 01:08:28 bigwhoop DMA zone: 4096 pages, LIFO batch:1 Jan 6 01:08:28 bigwhoop Normal zone: 225280 pages, LIFO batch:16 Jan 6 01:08:28 bigwhoop HighMem zone: 32752 pages, LIFO batch:7 Jan 6 01:08:28 bigwhoop DMI 2.3 present. Jan 6 01:08:28 bigwhoop Built 1 zonelists Jan 6 01:08:28 bigwhoop Kernel command line: splash=silent root=/dev/hda5 vga=788 acpi=off Jan 6 01:08:28 bigwhoop Initializing CPU#0 Jan 6 01:08:28 bigwhoop CPU 0 irqstacks, hard=c04d7000 soft=c04d6000 Jan 6 01:08:28 bigwhoop PID hash table entries: 4096 (order: 12, 65536 bytes) Jan 6 01:08:28 bigwhoop Detected 2004.554 MHz processor. Jan 6 01:08:28 bigwhoop Using tsc for high-res timesource Jan 6 01:08:28 bigwhoop Console: colour VGA+ 80x25 Jan 6 01:08:28 bigwhoop Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jan 6 01:08:28 bigwhoop Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jan 6 01:08:28 bigwhoop Memory: 1034692k/1048512k available (2769k kernel code, 13232k reserved, 969k data, 164k init, 131008k highmem) Jan 6 01:08:28 bigwhoop Checking if this processor honours the WP bit even in supervisor mode... Ok. Jan 6 01:08:28 bigwhoop Calibrating delay loop... 3964.92 BogoMIPS (lpj=1982464) Jan 6 01:08:28 bigwhoop Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Jan 6 01:08:28 bigwhoop CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 Jan 6 01:08:28 bigwhoop CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 Jan 6 01:08:28 bigwhoop CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Jan 6 01:08:28 bigwhoop CPU: L2 Cache: 256K (64 bytes/line) Jan 6 01:08:28 bigwhoop CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 Jan 6 01:08:28 bigwhoop Intel machine check architecture supported. Jan 6 01:08:28 bigwhoop Intel machine check reporting enabled on CPU#0. Jan 6 01:08:28 bigwhoop CPU: AMD Athlon(tm) XP 2400+ stepping 01 Jan 6 01:08:28 bigwhoop Enabling fast FPU save and restore... done. Jan 6 01:08:28 bigwhoop Enabling unmasked SIMD FPU exception support... done. Jan 6 01:08:28 bigwhoop Checking 'hlt' instruction... OK. Jan 6 01:08:28 bigwhoop NET: Registered protocol family 16 Jan 6 01:08:28 bigwhoop PCI: PCI BIOS revision 2.10 entry at 0xfb430, last bus=2 Jan 6 01:08:28 bigwhoop PCI: Using configuration type 1 Jan 6 01:08:28 bigwhoop mtrr: v2.0 (20020519) Jan 6 01:08:28 bigwhoop ACPI: Subsystem revision 20041105 Jan 6 01:08:28 bigwhoop ACPI: Interpreter disabled. Jan 6 01:08:28 bigwhoop Linux Plug and Play Support v0.97 (c) Adam Belay Jan 6 01:08:28 bigwhoop pnp: PnP ACPI: ACPI disable Jan 6 01:08:28 bigwhoop SCSI subsystem initialized Jan 6 01:08:28 bigwhoop usbcore: registered new driver usbfs Jan 6 01:08:28 bigwhoop usbcore: registered new driver hub Jan 6 01:08:28 bigwhoop PCI: Probing PCI hardware Jan 6 01:08:28 bigwhoop PCI: Probing PCI hardware (bus 00) Jan 6 01:08:28 bigwhoop PCI: Discovered primary peer bus ff [IRQ] Jan 6 01:08:28 bigwhoop PCI: Using IRQ router default [10de/01e0] at 0000:00:00.0 Jan 6 01:08:28 bigwhoop Machine check exception polling timer started. Jan 6 01:08:28 bigwhoop audit: initializing netlink socket (disabled) Jan 6 01:08:28 bigwhoop audit(1104970096.469:0): initialized Jan 6 01:08:28 bigwhoop highmem bounce pool size: 64 pages Jan 6 01:08:28 bigwhoop devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) Jan 6 01:08:28 bigwhoop devfs: boot_options: 0x1 Jan 6 01:08:28 bigwhoop Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Jan 6 01:08:28 bigwhoop NTFS driver 2.1.22 [Flags: R/W]. Jan 6 01:08:28 bigwhoop Initializing Cryptographic API Jan 6 01:08:28 bigwhoop pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jan 6 01:08:28 bigwhoop inotify device minor=63 Jan 6 01:08:28 bigwhoop lp: driver loaded but no devices found Jan 6 01:08:28 bigwhoop Linux agpgart interface v0.100 (c) Dave Jones Jan 6 01:08:28 bigwhoop agpgart: Detected NVIDIA nForce2 chipset Jan 6 01:08:28 bigwhoop agpgart: Maximum main memory to use for agp memory: 941M Jan 6 01:08:28 bigwhoop agpgart: AGP aperture is 128M @ 0xd0000000 Jan 6 01:08:28 bigwhoop serio: i8042 AUX port at 0x60,0x64 irq 12 Jan 6 01:08:28 bigwhoop serio: i8042 KBD port at 0x60,0x64 irq 1 Jan 6 01:08:28 bigwhoop Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled Jan 6 01:08:28 bigwhoop ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jan 6 01:08:28 bigwhoop ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Jan 6 01:08:28 bigwhoop mice: PS/2 mouse device common for all mice Jan 6 01:08:28 bigwhoop input: AT Translated Set 2 keyboard on isa0060/serio0 Jan 6 01:08:28 bigwhoop parport0: PC-style at 0x378 [PCSPP(,...)] Jan 6 01:08:28 bigwhoop lp0: using parport0 (polling). Jan 6 01:08:28 bigwhoop io scheduler noop registered Jan 6 01:08:28 bigwhoop io scheduler anticipatory registered Jan 6 01:08:28 bigwhoop io scheduler deadline registered Jan 6 01:08:28 bigwhoop io scheduler cfq registered Jan 6 01:08:28 bigwhoop elevator: using anticipatory as default io scheduler Jan 6 01:08:28 bigwhoop Floppy drive(s): fd0 is 1.44M Jan 6 01:08:28 bigwhoop FDC 0 is a post-1991 82077 Jan 6 01:08:28 bigwhoop nbd: registered device at major 43 Jan 6 01:08:28 bigwhoop Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Jan 6 01:08:28 bigwhoop ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jan 6 01:08:28 bigwhoop NFORCE2: IDE controller at PCI slot 0000:00:09.0 Jan 6 01:08:28 bigwhoop NFORCE2: chipset revision 162 Jan 6 01:08:28 bigwhoop NFORCE2: not 100% native mode: will probe irqs later Jan 6 01:08:28 bigwhoop NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. Jan 6 01:08:28 bigwhoop NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller Jan 6 01:08:28 bigwhoop ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA Jan 6 01:08:28 bigwhoop ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Jan 6 01:08:28 bigwhoop Probing IDE interface ide0... Jan 6 01:08:28 bigwhoop hda: IBM-DTLA-307015, ATA DISK drive Jan 6 01:08:28 bigwhoop hdb: IBM-DTLA-307030, ATA DISK drive Jan 6 01:08:28 bigwhoop ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Jan 6 01:08:28 bigwhoop Probing IDE interface ide1... Jan 6 01:08:28 bigwhoop hdc: PLEXTOR CD-R PX-W8432T, ATAPI CD/DVD-ROM drive Jan 6 01:08:28 bigwhoop hdd: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive Jan 6 01:08:28 bigwhoop ide1 at 0x170-0x177,0x376 on irq 15 Jan 6 01:08:28 bigwhoop Probing IDE interface ide2... Jan 6 01:08:28 bigwhoop ide2: Wait for ready failed before probe ! Jan 6 01:08:28 bigwhoop Probing IDE interface ide3... Jan 6 01:08:28 bigwhoop ide3: Wait for ready failed before probe ! Jan 6 01:08:28 bigwhoop Probing IDE interface ide4... Jan 6 01:08:28 bigwhoop ide4: Wait for ready failed before probe ! Jan 6 01:08:28 bigwhoop Probing IDE interface ide5... Jan 6 01:08:28 bigwhoop ide5: Wait for ready failed before probe ! Jan 6 01:08:28 bigwhoop hda: max request size: 128KiB Jan 6 01:08:28 bigwhoop hda: 30003120 sectors (15361 MB) w/1916KiB Cache, CHS=29765/16/63, UDMA(100) Jan 6 01:08:28 bigwhoop hda: cache flushes not supported Jan 6 01:08:28 bigwhoop /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 > Jan 6 01:08:28 bigwhoop hdb: max request size: 128KiB Jan 6 01:08:28 bigwhoop hdb: 60036480 sectors (30738 MB) w/1916KiB Cache, CHS=59560/16/63, UDMA(100) Jan 6 01:08:28 bigwhoop hdb: cache flushes not supported Jan 6 01:08:28 bigwhoop /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 p7 > Jan 6 01:08:28 bigwhoop hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, DMA Jan 6 01:08:28 bigwhoop Uniform CD-ROM driver Revision: 3.20 Jan 6 01:08:28 bigwhoop hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Jan 6 01:08:28 bigwhoop libata version 1.10 loaded. Jan 6 01:08:28 bigwhoop ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller Jan 6 01:08:28 bigwhoop PCI: Setting latency timer of device 0000:00:02.2 to 64 Jan 6 01:08:28 bigwhoop ehci_hcd 0000:00:02.2: irq 11, pci mem 0xeb003000 Jan 6 01:08:28 bigwhoop ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 Jan 6 01:08:28 bigwhoop PCI: cache line size of 64 is not supported by device 0000:00:02.2 Jan 6 01:08:28 bigwhoop ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 Jan 6 01:08:28 bigwhoop hub 1-0:1.0: USB hub found Jan 6 01:08:28 bigwhoop hub 1-0:1.0: 6 ports detected Jan 6 01:08:28 bigwhoop ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Jan 6 01:08:28 bigwhoop ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller Jan 6 01:08:28 bigwhoop PCI: Setting latency timer of device 0000:00:02.0 to 64 Jan 6 01:08:28 bigwhoop ohci_hcd 0000:00:02.0: irq 12, pci mem 0xeb001000 Jan 6 01:08:28 bigwhoop ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 Jan 6 01:08:28 bigwhoop hub 2-0:1.0: USB hub found Jan 6 01:08:28 bigwhoop hub 2-0:1.0: 3 ports detected Jan 6 01:08:28 bigwhoop ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2) Jan 6 01:08:28 bigwhoop PCI: Setting latency timer of device 0000:00:02.1 to 64 Jan 6 01:08:28 bigwhoop ohci_hcd 0000:00:02.1: irq 10, pci mem 0xeb002000 Jan 6 01:08:28 bigwhoop ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 Jan 6 01:08:28 bigwhoop hub 3-0:1.0: USB hub found Jan 6 01:08:28 bigwhoop hub 3-0:1.0: 3 ports detected Jan 6 01:08:28 bigwhoop USB Universal Host Controller Interface driver v2.2 Jan 6 01:08:28 bigwhoop usbcore: registered new driver usblp Jan 6 01:08:28 bigwhoop drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Jan 6 01:08:28 bigwhoop Initializing USB Mass Storage driver... Jan 6 01:08:28 bigwhoop usb 2-1: new low speed USB device using ohci_hcd and address 2 Jan 6 01:08:28 bigwhoop usbcore: registered new driver usb-storage Jan 6 01:08:28 bigwhoop USB Mass Storage support registered. Jan 6 01:08:28 bigwhoop input: Logitech USB-PS/2 Mouse on usb-0000:00:02.0-1 Jan 6 01:08:28 bigwhoop usbcore: registered new driver usbmouse Jan 6 01:08:28 bigwhoop drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver Jan 6 01:08:28 bigwhoop i2c /dev entries driver Jan 6 01:08:28 bigwhoop i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000 Jan 6 01:08:28 bigwhoop i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100 Jan 6 01:08:28 bigwhoop oprofile: using timer interrupt. Jan 6 01:08:28 bigwhoop NET: Registered protocol family 2 Jan 6 01:08:28 bigwhoop IP: routing cache hash table of 8192 buckets, 64Kbytes Jan 6 01:08:28 bigwhoop TCP: Hash tables configured (established 262144 bind 65536) Jan 6 01:08:28 bigwhoop ip_conntrack version 2.1 (8191 buckets, 65528 max) - 300 bytes per conntrack Jan 6 01:08:28 bigwhoop ip_tables: (C) 2000-2002 Netfilter core team Jan 6 01:08:28 bigwhoop ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/ Jan 6 01:08:28 bigwhoop arp_tables: (C) 2002 David S. Miller Jan 6 01:08:28 bigwhoop NET: Registered protocol family 1 Jan 6 01:08:28 bigwhoop NET: Registered protocol family 17 Jan 6 01:08:28 bigwhoop VFS: Mounted root (ext2 filesystem) readonly. Jan 6 01:08:28 bigwhoop Mounted devfs on /dev Jan 6 01:08:28 bigwhoop Freeing unused kernel memory: 164k freed Jan 6 01:08:28 bigwhoop Adding 2104472k swap on /dev/hdb1. Priority:42 extents:1 Jan 6 01:08:28 bigwhoop NTFS volume version 3.0. Jan 6 01:08:28 bigwhoop NTFS-fs error (device hdb6): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows. Jan 6 01:08:28 bigwhoop CAPI Subsystem Rev 1.1.2.8 Jan 6 01:08:28 bigwhoop capifs: Rev 1.1.2.3 Jan 6 01:08:28 bigwhoop capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) Jan 6 01:08:28 bigwhoop /usr/sbin/cron[6151]: (CRON) STARTUP (V5.0) Jan 6 01:08:28 bigwhoop init: Activating demand-procedures for 'A' Jan 6 01:09:16 bigwhoop pppd[6327]: Plugin capiplugin.so loaded. Jan 6 01:09:16 bigwhoop pppd[6327]: capiplugin: $Revision: 1.36 $ Jan 6 01:09:16 bigwhoop pppd[6327]: capiconn: 1.10 Jan 6 01:09:16 bigwhoop pppd[6327]: capiplugin: CAPI_REGISTER failed - CAPI not installed (0x1009) [No such device or address (6)] Jan 6 01:09:16 bigwhoop pppd[6327]: Exit. Jan 6 01:09:39 bigwhoop su[6329]: PAM pam_putenv: delete non-existent entry; REMOTEHOST Jan 6 01:09:39 bigwhoop PAM-env[6329]: Unknown PAM_ITEM: <DISPLAY> Jan 6 01:09:39 bigwhoop su[6329]: PAM pam_putenv: delete non-existent entry; DISPLAY Jan 6 01:09:39 bigwhoop PAM-env[6329]: Unknown PAM_ITEM: <XAUTHORITY> Jan 6 01:09:39 bigwhoop su[6329]: PAM pam_putenv: delete non-existent entry; XAUTHORITY Jan 6 01:09:39 bigwhoop su(pam_unix)[6329]: session opened for user root by wesker(uid=1000) Jan 6 01:09:39 bigwhoop su[6329]: PAM pam_putenv: delete non-existent entry; REMOTEHOST Jan 6 01:09:39 bigwhoop PAM-env[6329]: Unknown PAM_ITEM: <DISPLAY> Jan 6 01:09:39 bigwhoop su[6329]: PAM pam_putenv: delete non-existent entry; DISPLAY Jan 6 01:09:39 bigwhoop PAM-env[6329]: Unknown PAM_ITEM: <XAUTHORITY> Jan 6 01:09:39 bigwhoop su[6329]: PAM pam_putenv: delete non-existent entry; XAUTHORITY Jan 6 01:10:01 bigwhoop /usr/sbin/cron[6342]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jan 6 01:11:40 bigwhoop fcdsl: module license 'Proprietary' taints kernel. Jan 6 01:11:40 bigwhoop fcdsl: AVM FRITZ!Card DSL driver, revision 0.4.0 Jan 6 01:11:40 bigwhoop fcdsl: fcdsl built on Jan 6 2005 at 01:11:09) Jan 6 01:11:40 bigwhoop fcdsl: Loading... Jan 6 01:11:40 bigwhoop fcdsl: Driver 'fcdsl' attached to stack. (164) Jan 6 01:11:40 bigwhoop kcapi: Controller 1: fcdsl-ea800000-12 attached Jan 6 01:11:40 bigwhoop kcapi: Controller 2: fcdsl-ea800000-12 attached Jan 6 01:11:40 bigwhoop fcdsl: Loaded. Jan 6 01:11:40 bigwhoop fcdsl: Using VCC/VPI/VCI = 0x1/0x1/0x20 Jan 6 01:11:40 bigwhoop fcdsl: Stack version 3.11-02 Jan 6 01:11:40 bigwhoop fcdsl: Stack version 3.11-02 Jan 6 01:11:40 bigwhoop kcapi: card 1 "fcdsl-ea800000-12" ready. Jan 6 01:11:40 bigwhoop kcapi: card 2 "fcdsl-ea800000-12" ready. Jan 6 01:12:08 bigwhoop capilib_new_ncci: kcapi: appl 1 ncci 0x10102 up Jan 6 01:12:10 bigwhoop kcapi: appl 1 ncci 0x10102 down Jan 6 01:20:01 bigwhoop /usr/sbin/cron[7140]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Jan 6 01:27:43 bigwhoop pppd[7151]: Plugin capiplugin.so loaded. Jan 6 01:27:43 bigwhoop pppd[7151]: capiplugin: $Revision: 1.36 $ Jan 6 01:27:43 bigwhoop pppd[7151]: capiconn: 1.10 Jan 6 01:27:43 bigwhoop CSLIP: code copyright 1989 Regents of the University of California Jan 6 01:27:43 bigwhoop PPP generic driver version 2.4.2 Jan 6 01:27:43 bigwhoop pppd[7151]: pppd 2.4.2 started by root, uid 0 Jan 6 01:27:43 bigwhoop pppd[7151]: Using interface ppp0 Jan 6 01:27:43 bigwhoop pppd[7151]: local IP address 10.64.64.64 Jan 6 01:27:43 bigwhoop pppd[7151]: remote IP address 10.112.112.112 Jan 6 01:27:43 bigwhoop pppd[7151]: capiplugin: phase dormant. Jan 6 01:27:43 bigwhoop pppd[7151]: controller 1: listen_change_state state=1 event=1 ???? Jan 6 01:27:43 bigwhoop pppd[7151]: controller 1: listen_change_state state=1 event=1 ???? Jan 6 01:27:44 bigwhoop pppd[7151]: controller 1: listen_change_state state=0 event=3 ???? Jan 6 01:27:44 bigwhoop pppd[7151]: controller 1: listen_change_state state=0 event=3 ???? Jan 6 01:27:57 bigwhoop su[7170]: PAM pam_putenv: delete non-existent entry; REMOTEHOST Jan 6 01:27:57 bigwhoop PAM-env[7170]: Unknown PAM_ITEM: <DISPLAY> Jan 6 01:27:57 bigwhoop su[7170]: PAM pam_putenv: delete non-existent entry; DISPLAY Jan 6 01:27:57 bigwhoop PAM-env[7170]: Unknown PAM_ITEM: <XAUTHORITY> Jan 6 01:27:57 bigwhoop su[7170]: PAM pam_putenv: delete non-existent entry; XAUTHORITY Jan 6 01:27:57 bigwhoop su(pam_unix)[7170]: session opened for user root by wesker(uid=1000) Jan 6 01:27:57 bigwhoop su[7170]: PAM pam_putenv: delete non-existent entry; REMOTEHOST Jan 6 01:27:57 bigwhoop PAM-env[7170]: Unknown PAM_ITEM: <DISPLAY> Jan 6 01:27:57 bigwhoop su[7170]: PAM pam_putenv: delete non-existent entry; DISPLAY Jan 6 01:27:57 bigwhoop PAM-env[7170]: Unknown PAM_ITEM: <XAUTHORITY> Jan 6 01:27:57 bigwhoop su[7170]: PAM pam_putenv: delete non-existent entry; XAUTHORITY Jan 6 01:28:05 bigwhoop pppd[7151]: Starting link Jan 6 01:28:05 bigwhoop pppd[7151]: capiplugin: phase serialconn (was dormant). Jan 6 01:28:05 bigwhoop pppd[7151]: capiplugin: leased line (adslpppoe) Jan 6 01:28:05 bigwhoop capilib_new_ncci: kcapi: appl 1 ncci 0x10102 up Jan 6 01:28:05 bigwhoop pppd[7151]: capiplugin: connected: "" -> "" outgoing Jan 6 01:28:05 bigwhoop pppd[7151]: capiplugin: using /dev/capi/0: "" -> "" outgoing Jan 6 01:28:06 bigwhoop pppd[7151]: Connect: ppp0 <--> /dev/capi/0 Jan 6 01:28:06 bigwhoop pppd[7151]: capiplugin: phase establish (was serialconn). Jan 6 01:28:07 bigwhoop pppd[7151]: capiplugin: phase authenticate (was establish). Jan 6 01:28:07 bigwhoop pppd[7151]: PAP authentication succeeded Jan 6 01:28:07 bigwhoop pppd[7151]: capiplugin: phase network (was authenticate). Jan 6 01:28:07 bigwhoop pppd[7151]: Local IP address changed to 82.82.43.162 Jan 6 01:28:07 bigwhoop pppd[7151]: Remote IP address changed to 145.253.4.1 Jan 6 01:28:07 bigwhoop pppd[7151]: capiplugin: phase running (was network). And my Kernel.config : # Automatically generated make config: don't edit # Linux kernel version: 2.6.10-gentoo-r1 # Thu Jan 6 00:55:29 2005 # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y # # General setup # CONFIG_LOCALVERSION="" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set # # Loadable module support # CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set CONFIG_MK7=y # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_USE_3DNOW=y # CONFIG_HPET_TIMER is not set # CONFIG_SMP is not set CONFIG_PREEMPT=y # CONFIG_X86_UP_APIC is not set CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_HIGHMEM=y # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set CONFIG_HAVE_DEC_LOCK=y # CONFIG_REGPARM is not set # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_SOFTWARE_SUSPEND=y CONFIG_PM_STD_PARTITION="" # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_VIDEO=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_X86_PM_TIMER is not set # # APM (Advanced Power Management) BIOS Support # # CONFIG_APM is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PC-card bridges # # # PCI Hotplug Support # CONFIG_HOTPLUG_PCI=y # CONFIG_HOTPLUG_PCI_FAKE is not set # CONFIG_HOTPLUG_PCI_COMPAQ is not set # CONFIG_HOTPLUG_PCI_ACPI is not set # CONFIG_HOTPLUG_PCI_CPCI is not set # CONFIG_HOTPLUG_PCI_PCIE is not set # CONFIG_HOTPLUG_PCI_SHPC is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_PNPACPI=y # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_LOOP is not set CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_INITRAMFS_SOURCE="" CONFIG_LBD=y # CONFIG_CDROM_PKTCDVD is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI Transport Attributes # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set CONFIG_SCSI_DPT_I2O=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set CONFIG_SCSI_ATA_PIIX=y # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_SATA_PROMISE is not set CONFIG_SCSI_SATA_SX4=m # CONFIG_SCSI_SATA_SIL is not set CONFIG_SCSI_SATA_SIS=m # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set # CONFIG_SCSI_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_SYM53C8XX_2 is not set CONFIG_SCSI_IPR=m # CONFIG_SCSI_IPR_TRACE is not set # CONFIG_SCSI_IPR_DUMP is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set # CONFIG_SCSI_QLA6322 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # CONFIG_I2O=m CONFIG_I2O_CONFIG=m CONFIG_I2O_BLOCK=m CONFIG_I2O_SCSI=m CONFIG_I2O_PROC=m # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set # CONFIG_IP_TCPDIAG is not set # CONFIG_IP_TCPDIAG_IPV6 is not set # # IP: Virtual Server Configuration # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=y # CONFIG_IP_NF_CT_ACCT is not set # CONFIG_IP_NF_CONNTRACK_MARK is not set # CONFIG_IP_NF_CT_PROTO_SCTP is not set # CONFIG_IP_NF_FTP is not set # CONFIG_IP_NF_IRC is not set # CONFIG_IP_NF_TFTP is not set # CONFIG_IP_NF_AMANDA is not set CONFIG_IP_NF_QUEUE=y CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_MATCH_LIMIT=y CONFIG_IP_NF_MATCH_IPRANGE=y CONFIG_IP_NF_MATCH_MAC=y CONFIG_IP_NF_MATCH_PKTTYPE=y CONFIG_IP_NF_MATCH_MARK=y CONFIG_IP_NF_MATCH_MULTIPORT=y CONFIG_IP_NF_MATCH_TOS=y CONFIG_IP_NF_MATCH_RECENT=y CONFIG_IP_NF_MATCH_ECN=y CONFIG_IP_NF_MATCH_DSCP=y CONFIG_IP_NF_MATCH_AH_ESP=y CONFIG_IP_NF_MATCH_LENGTH=y CONFIG_IP_NF_MATCH_TTL=y CONFIG_IP_NF_MATCH_TCPMSS=y CONFIG_IP_NF_MATCH_HELPER=y CONFIG_IP_NF_MATCH_STATE=y CONFIG_IP_NF_MATCH_CONNTRACK=y CONFIG_IP_NF_MATCH_OWNER=y # CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_REALM is not set # CONFIG_IP_NF_MATCH_SCTP is not set # CONFIG_IP_NF_MATCH_COMMENT is not set # CONFIG_IP_NF_MATCH_HASHLIMIT is not set CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_LOG=y CONFIG_IP_NF_TARGET_ULOG=y CONFIG_IP_NF_TARGET_TCPMSS=y CONFIG_IP_NF_NAT=y CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=y CONFIG_IP_NF_TARGET_REDIRECT=y CONFIG_IP_NF_TARGET_NETMAP=y CONFIG_IP_NF_TARGET_SAME=y # CONFIG_IP_NF_NAT_LOCAL is not set # CONFIG_IP_NF_NAT_SNMP_BASIC is not set CONFIG_IP_NF_MANGLE=y CONFIG_IP_NF_TARGET_TOS=y CONFIG_IP_NF_TARGET_ECN=y CONFIG_IP_NF_TARGET_DSCP=y CONFIG_IP_NF_TARGET_MARK=y CONFIG_IP_NF_TARGET_CLASSIFY=y CONFIG_IP_NF_RAW=m CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=y CONFIG_IP_NF_ARPFILTER=y CONFIG_IP_NF_ARP_MANGLE=y # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set CONFIG_VIA_RHINE=y CONFIG_VIA_RHINE_MMIO=y # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_S2IO is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=m CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # # ISDN subsystem # CONFIG_ISDN=m # # Old ISDN4Linux # # CONFIG_ISDN_I4L is not set # # CAPI subsystem # CONFIG_ISDN_CAPI=m CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_ISDN_CAPI_CAPI20=m CONFIG_ISDN_CAPI_CAPIFS_BOOL=y CONFIG_ISDN_CAPI_CAPIFS=m # # CAPI hardware drivers # # # Active AVM cards # CONFIG_CAPI_AVM=y CONFIG_ISDN_DRV_AVMB1_B1PCI=m CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y # CONFIG_ISDN_DRV_AVMB1_B1PCMCIA is not set # CONFIG_ISDN_DRV_AVMB1_T1PCI is not set CONFIG_ISDN_DRV_AVMB1_C4=m # # Active Eicon DIVA Server cards # # CONFIG_CAPI_EICON is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set # CONFIG_SERIO_RAW is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_INOTIFY=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set # CONFIG_SERIAL_8250_ACPI is not set CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set CONFIG_AGP_INTEL=y # CONFIG_AGP_INTEL_MCH is not set CONFIG_AGP_NVIDIA=y # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_VIA is not set # CONFIG_AGP_EFFICEON is not set CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set # CONFIG_DRM_I810 is not set # CONFIG_DRM_I830 is not set # CONFIG_DRM_I915 is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set # # I2C support # CONFIG_I2C=y CONFIG_I2C_CHARDEV=y # # I2C Algorithms # # CONFIG_I2C_ALGOBIT is not set # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_NFORCE2=y # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set # # Hardware Sensors Chip support # # CONFIG_I2C_SENSOR is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # # Other I2C Chip support # # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Misc devices # # CONFIG_IBM_ASM is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_VESA is not set # CONFIG_VIDEO_SELECT is not set # CONFIG_FB_HGA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I810 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # # Logo configuration # # CONFIG_LOGO is not set # CONFIG_FB_SPLASH is not set # # Speakup console speech # # CONFIG_SPEAKUP is not set CONFIG_SPEAKUP_DEFAULT="none" # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=m # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # PCI devices # CONFIG_SND_AC97_CODEC=m # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set CONFIG_SND_CS46XX=m # CONFIG_SND_CS46XX_NEW_DSP is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set CONFIG_SND_INTEL8X0=m # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VX222 is not set # # USB devices # # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set CONFIG_USB_MOUSE=y # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set # CONFIG_USB_EGALAX is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # # Video4Linux support is needed for USB Multimedia device support # # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_TEST is not set # # USB ATM/DSL drivers # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=y # CONFIG_NTFS_DEBUG is not set CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y CONFIG_DEVFS_FS=y CONFIG_DEVFS_MOUNT=y # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS_XATTR=y # CONFIG_DEVPTS_FS_SECURITY is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Profiling support # CONFIG_PROFILING=y CONFIG_OPROFILE=y # # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set # CONFIG_FRAME_POINTER is not set CONFIG_EARLY_PRINTK=y CONFIG_4KSTACKS=y # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES_586 is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set # # Library routines # CONFIG_CRC_CCITT=m CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=y CONFIG_PC=y Hope this helps
did your machine displayed an ops message? try to deactivate acpi.
You can read the oops in the german forum post, where this report comes from: http://forums.gentoo.org/viewtopic.php?t=275028 (As he mentioned there, he typed it manually from the screen, so it must have been really hard work)
By running without XDM i finally got this kernel Panic Message: Oops: 0000 [#2] PREEMPT Modules linked in : ppp_synctty ppp-generic slhc fcdsl capi capifs kernelcapi CPU: 0 EIP: 0060:[<c0102b88>] Tainted: P VLI EIP is at show_trace+0x28/0x90 eax:00000019 ebx:00030001 ecx:07070707 edx:00000082 esi:00030001 edi:00030000 ebp:000030ffd esp:c049cf48 ds:007b es:007b ss:0068 Process swapper (pid:0,threadinfo=c049c000 task=c03e2b00 Stack: c039b60e c01042de c049d150 00000018 00000000 00000001 c0102c70 00000000 c049d0f0 c649d0bc 00000000 c0102c00 00000000 c049d0f0 00000000 c049c000 c03e2b00 00010017 c03e53c2 c049d0bc c039c44b c010dc30 00000000 Call trace: [<c01042dc>] do_IRQ+0x3c/0x60 [<c0102c70>] show_stack+0x80(0xa0 [<c0102e00>] show_register+0x150/0x1b0 [<c010dc30>] do_page_fault+0x0/0x5c7 [<c0103007>] die+0xf7/0x140 [<c010dc30>] do_page_fault+0x0/0x5c7 [<c01133b7>] printk+0x17/0x20 [<c010de61>] do_page_fault+0x231/05c7 ======================================= [<c01307a4>] irq_exit+0x34/0x40 [<c01042e5>] do_irq+0x45/0x60 [<c010289a>] common_interruput+0x1a/0x20 [<c01005f0>] default_idle+0x0/0x30 [<c010068a>] cpu_idle+0x3a/0x60 [<c0470762>] start_kernel+0x142/0x160 [<c0470360>] unknown_bootoption+0x0/0x1b0 Code: 00 00 00 55 57 56 53 83 ec c8 8b 5c 24 20 89 df 89 de 81 e7 00 f0 ff ff 8d af fd 0f 00 00 90 8 d 74 26 00 39 fe 76 43 39 fe 76 43 39 ee 73 3f <8b> 1e 83 c6 04 84 1c 24 e8 eb 10 02 00 85 00 74 e7 84 5c 24 04 <0> Kernel panit - not syncing : Fatal exeption in interrupt Here is what cat /proc/interrupts shows: CPU0 0: 417780 XT-PIC timer 1: 935 XT-PIC i8042 2: 0 XT-PIC cascade 10: 0 XT-PIC ohci_hcd 11: 2 XT-PIC ehci_hcd 12: 27766 XT-PIC ohci_hcd, fcdsl 14: 78123 XT-PIC ide0 15: 22 XT-PIC ide1 NMI: 0 ERR: 0
As he stated in the forum, he solved it by downloading the source from: ftp://ftp.avm.de/cardware/fritzcrd.dsl/linux/suse.91/fcdsl-suse9.1-3.11-02.tar.gz and applying this patch: http://freiburg.linux.de/~zeisberg/howtos/fcdsl.diff I will leave the inclusion in the ebuild up to you, as the bug is ASSIGNED.
this package already have an ebuild (net-dialup/fcpci). do you think we should patch fcpci?
net-dialup/fcdsl-2.6.20.7 is the ebuild in question .. and I think we should reSRC_URI and epatch it at least, to get a newer version: For old tarballs and some patches: (rpm2targz to extract the patches) ftp://ftp.gwdg.de/pub/linux/suse/ftp.suse.com/suse/i386/9.2/suse/src/avm_fcdsl-2.6-27.src.rpm ftp://ftp.avm.de/cardware/ fritzcrd.ds*/linux dirs for the latest tarballs. patches referred to by the user: http://freiburg.linux.de/~zeisberg/howtos/fcdsl.diff http://freiburg.linux.de/~zeisberg/howtos/fcdsl-sl.diff http://freiburg.linux.de/~zeisberg/howtos/fcdsl-sl-usb.diff Should I sort that out, or would you like to do that?
I am very busy at work right now. If you sorted out this issues, please do the changes.
MonkeyIsland: How do you find out the real driver version from an source archive? I need something to judge which archive is newer ..
I haven't a problem with the driver with any 2.6.10 version (now gentoo-sources-2.6.10-r6), but that means nothing. Well, the driver from AVM homepage is newer... src/devfs.h => 0.4.1 the version in net-dialup/fcdsl-2.6.20.7 src/devfs.h => 0.4.0 The ebuild pointing to the driver for SuSE 9.1. The current version could be for SuSE 9.2. I think it would be good to reSRC the whole ebuild and applying the patches... That could solve that problem...
This is the current packaged SuSE version (2.6.27) ftp://ftp.suse.com/pub/suse/i386/9.2/suse/src/avm_fcdsl-2.6-27.src.rpm The package version is younger than the homepage one, but the version is 0.4.0, too. When reSRC the package, should we split it into own ebuild for each card?
Created attachment 49107 [details] fcdsl-2.6.20.7-r2.ebuild ok, this is the new ebuild for the avm sources I did not add the patch as it did not apply cleanly here .. Can you please test if it works for you out of the box and if the patch is really needed?
Created attachment 49108 [details, diff] fcdsl.diff fixed diff for the avm sources, I am not sure if this is even needed .. I left one hunk out because it was changed in the current revision.
Well I'm trying to test tonight. As far as I know the patch is for stability reasons. IMHO, MonkeyIsland should look if this solve his problems. When so, I think it would be good that this version become stable as soon as possible...
what do you think about the versioning? I think we should have this one named -0.4.1, as the driver-revision and not some strange suse-numbers count imo. Should I add this to portage, have you tested it?
0.4.1 vor all package aren't the right version for all of the five packages included in this ebuild. The version for fcdsl package is only 0.4.1 the other packages could have other revision numbers. IMHO, one could be going to net-dialup/fcdsl-2.6.ebuild (generally for 2.6, revision by -r*) or net-dialup/fcdsl-2.6.0.ebuild (generally for 2.6, driver revisions 0-n, package revision by -r*) because the package (and therefore all drivers, now) is created for kernel 2.6 I prefer the second scheme. What do you think?
Haven't tested it, yet. But, I think in 3-4 hours.
O.K. tests are running... Well one problem I notice: installation target for fcdsl.ko was /lib/modules/.../misc. Now it is /lib/modules.../net. /lib/modules/.../misc ist cfgpro therefore there a two different versions of the driver when upgrading. IMHO a info for the user is helpful. The other results in one hour.
Without the patch it seems to work for me. Well I'm switching to SMP no, so I post my results here, too. Using gentoo-sources-2.6.10-r6. Well are the MonkeyIsland's problems are gone, now?
Well, smp (ht) seems to work, too. Now, seeing and waiting what MonkeyIsland says.
MonkeyIsland: Could you please try it and comment?
Sorry guys, I fried my PC (actually only the Mainboard), here is a little advice to all of you, when you want to use self soldered circuits on your pc <- make shure you insulate the properly ... AHHHH but everything is fine again now, the new MB has the same nforce2 chipset as the board i fried so gentoo is running as if nothing happened ...puh Back to the kernel panic issue, I will test the patch as soon as someone tells me what to do. Which driver to use etc, or should I just emerge the new ebuild? Again sorry for answering so late hope we can finish this soon.
emerge -va =fcdsl-2.6.20.7-r3 ^ That will test what we have currently in portage w/o the patch. if you want to apply the patch make CTRL+Z after "source unpacked" and cd into /var/tmp/portage/fcdsl-2.6.20.7-r3/work then do patch -p1 < /path/to/patch finally fg to resume emerge
need info if the patch is really needed
Cant emerge the new ebuild it keeps saying no digest file avaible and download failed :(
the new ebuild is already in portage for ~x86, you only need to verify if the attached patch is really needed.
Hi Currently I was one of the other people having kernel panics while downloading files. More info about this could be found here: http://forums.gentoo.org/viewtopic.php?t=218125 Currently I gave the new ebuilds a new try. I'm now running gentoo-dev-sources-2.6.10-r7 and applied the diff-file-patch to fcdsl-2.6.20.7-r3 Without the patches I got the same kernel panics as before and I'm now running some stress tests to see if the patch gives me a stable connection. I got some bigger downoads finished, so as far as I could tell at this time THE PATCH IS NEEDED, or at least it's more stable with it If I run into any further troubles I will report back so long pi
I think we then need this patch for all fcdsl's: fcdsl fcdsl2 fcdslsl fcdslusb fcdslslusb I do not own the hardware and therefore cannot test it. It needs to be modified for the different cards. Stefan: can you please test the patch for what you own?
I have nothing of it. I have: 1. AVM B1 -> active card, needs only firmware 2. AVM Fritz! USB v2.0 -> 'fritzcapi' 3. AVM Fritz! PCI -> 'fritzcapi' 4. AVM Fritz! PCMCIA -> 'fritzcapi' 5. AVM Fritz!Box SL -> driverless (Router/DSL-Modem) 'fcdsl' is for the AVM DSL/ISDN-Cards with CAPI support. I don't have such card. :-/
ok, I adjustet the patch for all fritzcarddsl's, I need testing now. http://dev.gentoo.org/~genstef/files/overlay/fcdsl.tar You can see the single patches there: http://dev.gentoo.org/~genstef/files/overlay/fcdsl/files
I added a -r4 ebuild with the patches to the portage tree. Thank you all
