this is the output emerge -1v Alien-SDL These are the packages that would be merged, in order: Calculating dependencies... done! [ebuild R ] dev-perl/Alien-SDL-1.440.0 0 KiB Total: 1 package (1 reinstall), Size of downloads: 0 KiB >>> Verifying ebuild manifests >>> Emerging (1 of 1) dev-perl/Alien-SDL-1.440.0::gentoo * Alien-SDL-1.440.tar.gz SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ] >>> Unpacking source... >>> Unpacking Alien-SDL-1.440.tar.gz to /var/tmp/portage/dev-perl/Alien-SDL-1.440.0/work >>> Source unpacked in /var/tmp/portage/dev-perl/Alien-SDL-1.440.0/work >>> Preparing source in /var/tmp/portage/dev-perl/Alien-SDL-1.440.0/work/Alien-SDL-1.440 ... >>> Source prepared. >>> Configuring source in /var/tmp/portage/dev-perl/Alien-SDL-1.440.0/work/Alien-SDL-1.440 ... * Using Module::Build * perl Build.PL --installdirs=vendor --libdoc= --destdir=/var/tmp/portage/dev-perl/Alien-SDL-1.440.0/image/ --create_packlist=0 --with-sdl-config Welcome to Alien::SDL module installation ----------------------------------------- checking operating system... linux checking for x86_64-pc-linux-gnu-gcc... yes checking build system type... x86_64-linux-thread-multi checking platform specific module... using 'My::Builder::Unix' Require 'My::Builder::Unix' failed: Can't locate Archive/Extract.pm in @INC (you may need to install the Archive::Extract module) (@INC contains: inc /etc/perl /usr/local/lib64/perl5/5.20.1/x86_64-linux-thread-multi /usr/local/lib64/perl5/5.20.1 /usr/lib64/perl5/vendor_perl/5.20.1/x86_64-linux-thread-multi /usr/lib64/perl5/vendor_perl/5.20.1 /usr/lib64/perl5/5.20.1/x86_64-linux-thread-multi /usr/lib64/perl5/5.20.1 .) at inc/My/Builder.pm line 15. BEGIN failed--compilation aborted at inc/My/Builder.pm line 15. Compilation failed in require at /usr/lib64/perl5/5.20.1/base.pm line 99. ...propagated at /usr/lib64/perl5/5.20.1/base.pm line 108. BEGIN failed--compilation aborted at inc/My/Builder/Unix.pm line 5. Compilation failed in require at (eval 16) line 2. * ERROR: dev-perl/Alien-SDL-1.440.0::gentoo failed (configure phase): * Unable to build! * * Call stack: * ebuild.sh, line 93: Called src_configure * environment, line 2400: Called perl-module_src_configure * environment, line 2012: Called perl-module_src_prep * environment, line 2078: Called die * The specific snippet of code: * perl Build.PL "$@" <<< "${pm_echovar}" || die "Unable to build!"; * * If you need support, post the output of `emerge --info '=dev-perl/Alien-SDL-1.440.0::gentoo'`, * the complete build log and the output of `emerge -pqv '=dev-perl/Alien-SDL-1.440.0::gentoo'`. * The complete build log is located at '/var/tmp/portage/dev-perl/Alien-SDL-1.440.0/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-perl/Alien-SDL-1.440.0/temp/environment'. * Working directory: '/var/tmp/portage/dev-perl/Alien-SDL-1.440.0/work/Alien-SDL-1.440' * S: '/var/tmp/portage/dev-perl/Alien-SDL-1.440.0/work/Alien-SDL-1.440' >>> Failed to emerge dev-perl/Alien-SDL-1.440.0, Log file: >>> '/var/tmp/portage/dev-perl/Alien-SDL-1.440.0/temp/build.log' * Messages for package dev-perl/Alien-SDL-1.440.0: * ERROR: dev-perl/Alien-SDL-1.440.0::gentoo failed (configure phase): * Unable to build! * * Call stack: * ebuild.sh, line 93: Called src_configure * environment, line 2400: Called perl-module_src_configure * environment, line 2012: Called perl-module_src_prep * environment, line 2078: Called die * The specific snippet of code: * perl Build.PL "$@" <<< "${pm_echovar}" || die "Unable to build!"; * * If you need support, post the output of `emerge --info '=dev-perl/Alien-SDL-1.440.0::gentoo'`, * the complete build log and the output of `emerge -pqv '=dev-perl/Alien-SDL-1.440.0::gentoo'`. * The complete build log is located at '/var/tmp/portage/dev-perl/Alien-SDL-1.440.0/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-perl/Alien-SDL-1.440.0/temp/environment'. * Working directory: '/var/tmp/portage/dev-perl/Alien-SDL-1.440.0/work/Alien-SDL-1.440' * S: '/var/tmp/portage/dev-perl/Alien-SDL-1.440.0/work/Alien-SDL-1.440' Reproducible: Always my emerge --info Portage 2.2.13 (python 2.7.8-final-0, default/linux/amd64/13.0/desktop/kde, gcc-4.8.3, glibc-2.19-r1, 3.16.3-gentoo x86_64) ================================================================= System uname: Linux-3.16.3-gentoo-x86_64-Intel-R-_Core-TM-_i7-4710HQ_CPU_@_2.50GHz-with-gentoo-2.2 KiB Mem: 16346344 total, 9413444 free KiB Swap: 17825788 total, 17825788 free Timestamp of tree: Wed, 24 Sep 2014 09:15:01 +0000 ld ld di GNU (GNU Binutils) 2.24 distcc 3.1 x86_64-pc-linux-gnu [disabled] ccache version 3.1.9 [enabled] app-shells/bash: 4.2_p47 dev-java/java-config: 2.2.0 dev-lang/python: 2.7.8, 3.3.5-r1, 3.4.1 dev-util/ccache: 3.1.9-r3 dev-util/cmake: 3.0.2 dev-util/pkgconfig: 0.28-r2 sys-apps/baselayout: 2.2 sys-apps/openrc: 0.13.1 sys-apps/sandbox: 2.6-r1 sys-devel/autoconf: 2.13, 2.69 sys-devel/automake: 1.11.6, 1.14.1 sys-devel/binutils: 2.24-r3 sys-devel/gcc: 4.7.3-r1, 4.8.3 sys-devel/gcc-config: 1.8 sys-devel/libtool: 2.4.2-r1 sys-devel/make: 4.0-r1 sys-kernel/linux-headers: 3.16 (virtual/os-headers) sys-libs/glibc: 2.19-r1 Repositories: gentoo sunrise gamerlay pinkbyte luman voyageur zugaina belak maggu2810-overlay maekke pentoo betagarden nikai yarik-overlay amielke-overlay manual bibletime ACCEPT_KEYWORDS="amd64 ~amd64" ACCEPT_LICENSE="*" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=native -O2 -pipe -fomit-frame-pointer" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="${CONFIG_PROTECT} /etc /etc/idea/conf /usr/share/config /usr/share/gnupg/qualified.txt /usr/share/maven-bin-3.1/conf /var/lib/hsqldb" CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/texmf/web2c" CXXFLAGS="-march=native -O2 -pipe -fomit-frame-pointer" DISTDIR="/usr/portage/distfiles" FCFLAGS="-O2 -pipe" FEATURES="assume-digests binpkg-logs ccache config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync" FFLAGS="-O2 -pipe" GENTOO_MIRRORS=" http://mirror.ovh.net/gentoo-distfiles/ http://ftp.heanet.ie/pub/gentoo/ http://mirror.ovh.net/gentoo-distfiles/ http://www.die.unipd.it/pub/Linux/distributions/gentoo-sources/ rsync://rsync3.it.gentoo.org/gentoo-sources/ ftp://ftp.unina.it/pub/linux/distributions/gentoo/" LANG="it_IT.UTF-8" LDFLAGS="-Wl,-O1 -Wl,--as-needed" MAKEOPTS="-j9" PKGDIR="/usr/portage/packages" PORTAGE_CONFIGROOT="/" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/var/lib/layman/sunrise /var/lib/layman/gamerlay /var/lib/layman/pinkbyte /var/lib/layman/luman /var/lib/layman/voyageur /var/lib/layman/zugaina /var/lib/layman/belak /var/lib/layman/maggu2810-overlay /var/lib/layman/maekke /var/lib/layman/pentoo /var/lib/layman/betagarden /var/lib/layman/nikai /var/lib/layman/yarik-overlay /var/lib/layman/amielke-overlay /usr/portage/local/manual /var/lib/layman/bibletime" SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage" USE="3ds 64bit X a52 aac aacplus aacs aalib acl acpi ads aften aiglx akode alias alsa amd64 amr ao apache apm apng asyncns audiofile autoreplace autotrace avahi avi bash-completion berkdb bidi bitmap-fonts bluetooth bluray bmp branding browserplugin bzip bzip2 cairo caps cdaudio cdda cdr cli clucene connectionstatus consolekit contactnotes cracklib crypt cuda cups cvd cvs cxx dbus declarative dia dialup djvu dri dtmf dts dv dvd dvdr dvdread dvi dynamicplugin ebook efi emboss encode ethereal exif fam farstream fat ffmpeg firefox flac fluidsynth fontconfig foomaticdb fortran freetds frei0r gbm gdbm geolocation gif gimp git glamor gles gles2 glib glitz gphoto2 gpm gps gpu groupwise gstreamer gtk gtk3 h323 highlight history hvm i8x0 iconv icu ieee1394 imagemagick innodb ios iphone ipod ipv6 irc ithreads jack java javascript jingle jpeg jpeg2k kde kdenlive kdepim kerberos kipi kontact kqemu lame laptop lcms ldap libkms libnotify lm_sensors lucene m4a mad marble mbrola mdb mdnsresponder-compat mercurial midi mime minizip mmx mmxext mng modules moonlight mozilla mp3 mp4 mpeg mpeg2 mplayer msn mssql multilib musepack musicbrainz ncurses netmeeting nls nowlistening npt1 nptl nptlonly nsplugin ntfs nvidia odbc ogg openal openexr opengl openipmi openmp opus orc oss pam pango pcmcia pcre pda pdf perl phonon plasma pmu png policykit portaudio postgres ppds pulseaudio python python3 qemu qt qt3support qt4 quicktime rar raw rdesktop rdp readline reiserfs reports samba sametime sane scanner sdl semantic-desktop session sip sipim skype smp sms soprano soundtouch speex spell sqlite sse sse2 ssh ssl ssse3 startup-notification subtitles subversion svg tcpd texteffect texteffects theora tidy tiff timidity tk tordns translator truetype truetype-fonts twolame type1-fonts udev udisks unicode upower usb utempter uxa v4l v4l2 vcd vdpau video virtualbox vnc vorbis vpx wav wavpack webkit webpresence webrtc-aec wicd wifi win32codecs win64 winbind winetriks winpopup wlm wmf wxwidgets wxwindows x264 xcb xcomposite xen xetex xine xinerama xml xmp xscreensaver xv xvid xvmc yahoo zeroconf zlib" ABI_X86="64" ALSA_CARDS="snd_hda_intel" APACHE2_MODULES="actions alias auth_basic auth_digest authn_anon authn_dbd authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock dbd deflate dir disk_cache env expires ext_filter file_cache filter headers ident imagemap include info log_config logio mem_cache mime mime_magic negotiation proxy proxy_ajp proxy_balancer proxy_connect proxy_http rewrite setenvif so speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="*" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse evdev joystick synaptics wacom" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LINGUAS="it en it_IT" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" RUBY_TARGETS="ruby19 ruby20 ruby21" SANE_BACKENDS="*" USERLAND="GNU" VIDEO_CARDS="nvidia intel nv vesa nouveau v4l v4l2 modesetting" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON
I see some 5.20.1 stuff....did you run e.g. perl-cleaner --reallyall ?
(In reply to Agostino Sarubbo from comment #1) > I see some 5.20.1 stuff....did you run e.g. perl-cleaner --reallyall ? I run: 1) emerge --deselect --ask $(qlist -IC 'perl-core/*') 2) emerge -uD1a $(qlist -IC 'virtual/perl-*') 3) perl-cleaner --allmodules --libperl And during the installation it blocks in dev-perl/SDL-2.544::gentoo saying: Can't locate Alien/SDL.pm in @INC (you may need to install the Alien::SDL module) so I make: emerge dev-perl/Alien-SDL and I got that error. Now I try --reallyall as you asked.
I lunched perl-cleaner --reallyall just now and it is compiling, however in starting it says: Can't open machine/ansi.h: File o directory non esistente Can't open sys/_types.h: File o directory non esistente Can't open gnu/stubs-x32.h: File o directory non esistente Can't open gnu/stubs-x32.h: File o directory non esistente Can't open gnu/stubs-x32.h: File o directory non esistente Can't open gnu/stubs-x32.h: File o directory non esistente ("not existing file or directory" sorry for the italian messages) do you think it could be a problem?
(In reply to Agostino Sarubbo from comment #1) > I see some 5.20.1 stuff....did you run e.g. perl-cleaner --reallyall ? Why you are suprised of 5.20.1, isnt' it the last version?
noting changes, it locks in Alien-SDL as before.
Archive::Extract a part of perl dist afair, check your perl first.
(In reply to Mikle Kolyada from comment #6) > Archive::Extract a part of perl dist afair, check your perl first. Same issue here. perl-5.18.2 had installed Archive/Extract.pm, in perl-5.20.1 it is absent, though. http://comments.gmane.org/gmane.comp.lang.perl.perl5.porters/119861
Same problem here, any idea about how we can solve it? I can see a perl-core/Archive-Extract package in some gentoo overlays, maybe we should create a (temporary) package in repository?
corelist -a Archive::Extract Archive::Extract was first released with perl v5.9.5, deprecated (will be CPAN-only) in v5.17.9 and removed from v5.19.0 Indeed, Archive-Extract is in fact missing after installation of 5.20, and a virtual may be need to be created to fill the void. Though it should probably be simply slated to dev-perl/* because that's where it will end up as soon as 5.18 vanishes from tree.
I have hit this too, any clue as to what can be done?
(In reply to Billy DeVincentis from comment #10) > I have hit this too, any clue as to what can be done? Install newly added dev-perl/Archive-Extract Can't add it as dependency yet since it still lacks testing and keywords. Soon...
(In reply to Andreas K. Hüttel from comment #11) > (In reply to Billy DeVincentis from comment #10) > > I have hit this too, any clue as to what can be done? > > Install newly added dev-perl/Archive-Extract > > Can't add it as dependency yet since it still lacks testing and keywords. > Soon... should be fine now
Dependency added
