i have an egalax device, usbid: 0eef:0001 D-WAV Scientific Co., Ltd eGalax TouchScreen dmesg: usb 5-1: configuration #1 chosen from 1 choice usb 5-1: New USB device found, idVendor=0eef, idProduct=0001 usb 5-1: New USB device strings: Mfr=1, Product=5, SerialNumber=3 usb 5-1: Manufacturer: eGalax Inc. input: eGalax Inc. as /class/input/input0 usbcore: registered new interface driver usbtouchscreen lahal: udi = '/org/freedesktop/Hal/devices/usb_device_eef_1_noserial' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string) info.product = 'eGalax TouchScreen' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_eef_1_noserial' (string) info.vendor = 'D-WAV Scientific Co., Ltd' (string) linux.device_file = '/dev/bus/usb/005/002' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1' (string) usb_device.bus_number = 5 (0x5) (int) usb_device.can_wake_up = true (bool) usb_device.configuration = 'USB TouchScreen' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'eGalax TouchScreen' (string) usb_device.product_id = 1 (0x1) (int) usb_device.speed = 1.5 (1.5) (double) usb_device.vendor = 'D-WAV Scientific Co., Ltd' (string) usb_device.vendor_id = 3823 (0xeef) (int) usb_device.version = 1.1 (1.1) (double) ... udi = '/org/freedesktop/Hal/devices/usb_device_eef_1_noserial_if0_logicaldev_input' button.has_state = false (bool) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button', 'input.mouse'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_eef_1_noserial_if0' (string) info.product = 'eGalax Inc.' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_eef_1_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event0' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_eef_1_noserial_if0' (string) input.product = 'eGalax Inc.' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/class/input/input0/event0' (string) xorg.conf related: Section "InputDevice" Identifier "touchscreen" Driver "evtouch" Option "Device" "/dev/input/event0" Option "DeviceName" "touchscreen" Option "ReportingMode" "Raw" Option "Emulate3Buttons" "false" # Option "Emulate3Timeout" "5000" Option "SendCoreEvents" "Off" Option "AlwaysCore" Option "ButtonNumber" "1" Option "longtouch_button" "1" Option "longtouch_action" "click" Option "oneandahalftap_action" "click" Option "oneandahalftap_button" "1" # Option "longtouch_button" 3 # Option "Rotate" "CCW" # Option "SwapX" "true" # Option "SwapY" "true" Option "Calibrate" "1" EndSection the device works, i see it's led blinking when i touch/release it. cat /dev/input/event0 shows the garbage when i touch the panel touching the panel: X -verbose 100 read 0x22 (") read 0xae (.) read 0x26 (&) read 0x49 (I) read 0x04 (.) read 0xfa (.) read 0x0d (.) read 0x00 (.) read 0x01 (.) read 0x00 (.) read 0x4a (J) read 0x01 (.) read 0x00 (.) read 0x00 (.) read 0x00 (.) read 0x00 (.) read 0x22 (") read 0xae (.) read 0x26 (&) read 0x49 (I) read 0x0a (.) read 0xfa (.) read 0x0d (.) read 0x00 (.) read 0x00 (.) read 0x00 (.) read 0x00 (.) read 0x00 (.) read 0x00 (.) read 0x00 (.) read 0x00 (.) read 0x00 (.) select returned 0 uname -a Linux touch 2.6.25-gentoo-r9 #1 SMP PREEMPT Thu Nov 20 22:06:58 EET 2008 i686 Intel(R) Celeron(R) CPU 440 @ 2.00GHz GenuineIntel GNU/Linux i'm calibrating, as described, but when i run X for the test no matter where i touch the panel the cursor only moves horizontally in the middle of the screen. is this usbid not supported?
Closing, xf86-input-evtouch is gone from the portage tree.
