148185 – Network doesn´t work although it should be OK

Bug 148185 - Network doesn´t work although it should be OK

Summary: Network doesn´t work although it should be OK

Status:	RESOLVED NEEDINFO

Alias:	None

Product:	Gentoo Linux
Classification:	Unclassified
Component:	[OLD] Core system (show other bugs)
Hardware:	x86 Linux

Importance:	High normal
Assignee:	Gentoo Linux bug wranglers

URL:
Whiteboard:
Keywords:

Depends on:
Blocks:

Reported:	2006-09-19 05:51 UTC by Tomá Kohout
Modified:	2006-09-19 07:19 UTC (History)
CC List:	0 users

See Also:
Package list:
Runtime testing required:	---

Attachments
Add an attachment (proposed patch, testcase, etc.)

Note You need to log in before you can comment on or make changes to this bug.

Description Tomá Kohout 2006-09-19 05:51:53 UTC

I installed Gentoo 2006.0 with core 2.6.17-r8. I installed stage3 and then I compiled the core. Major I was very careful to choosing right driver for my Ethernet NIC. It

Comment 1 Tomá Kohout 2006-09-19 05:51:53 UTC

I installed Gentoo 2006.0 with core 2.6.17-r8. I installed stage3 and then I compiled the core. Major I was very careful to choosing right driver for my Ethernet NIC. It´s REALTEK 8139. I checked the driver for this card. It´s compiled in the core. I use DHCP protocol, I emerged dhcpcd and I made some options for this. Network should be accessible, but if I rebooted my notebook, network didn´t work. "eth0 isn´t Ethernet device". Driver for REALTEK 8139 is mark as EXPERIMENTAL because I think it should be OK? I will try to recompile the core with other drivers and I´ll see. Thank you for your time.

Comment 2 Jakub Moc (RETIRED) gentoo-dev

2006-09-19 07:19:03 UTC

Don't restrict bugs without any reason. Just leave the checkboxes alone.

Reopen with emerge --info, your network configuration, kernel .config and dmesg output.