My computer has been in a box for a month or two. I pulled it out, did: emerge --sync emerge portage emerge -uD world It ended on: {standard input}: Assembler messages: {standard input}:11909: Error: bad expression {standard input}:11909: Error: junk at end of line, first unrecognized character is `n' {standard input}:11944: Error: bad expression {standard input}:11944: Error: junk at end of line, first unrecognized character is `n' {standard input}:12439: Error: bad expression {standard input}:12439: Error: junk at end of line, first unrecognized character is `n' make[2]: *** [/var/tmp/portage/glibc-2.3.6-r4/work/build-default-i686-pc-linux-gnu-nptl/inet/if_index.os] Error 1 make[2]: *** Waiting for unfinished jobs.... make[2]: Leaving directory `/var/tmp/portage/glibc-2.3.6-r4/work/glibc-2.3.6/inet' make[1]: *** [inet/subdir_lib] Error 2 make[1]: Leaving directory `/var/tmp/portage/glibc-2.3.6-r4/work/glibc-2.3.6' make: *** [all] Error 2 !!! ERROR: sys-libs/glibc-2.3.6-r4 failed. Call stack: ebuild.sh, line 1539: Called dyn_compile ebuild.sh, line 939: Called src_compile glibc-2.3.6-r4.ebuild, line 1128: Called toolchain-glibc_src_compile glibc-2.3.6-r4.ebuild, line 224: Called die I've tried doing a revdep-rebuild, emerge -e system, tried re-emerging gcc, doing a gcc-config, and trying again. Same error every time. I've poked around on the bug list, the forums, and tried a couple things here and there for the past few days, but it just keeps repeating, so I guess it's a bug... I'll attach my emerge --info, and make.conf later down
My emerge --info I've got lots of USE flags, but I try to keep optimization down a bit. I do have nostrip enabled, and set -ggdb3, so everything has debugging symbols. (mainly this helps me when I'm coding and I've written a segfault that ends up barfing in glibc....) stubox stu# emerge --info Portage 2.1-r1 (default-linux/x86/2006.0, gcc-3.4.6, glibc-2.3.6-r3, 2.6.15.6 i686) ================================================================= System uname: 2.6.15.6 i686 AMD Athlon(tm) XP 2500+ Gentoo Base System version 1.6.15 dev-lang/python: 2.2.3-r5, 2.3.5-r2, 2.4.3-r1 dev-python/pycrypto: 2.0.1-r5 dev-util/ccache: [Not Present] dev-util/confcache: [Not Present] sys-apps/sandbox: 1.2.17 sys-devel/autoconf: 2.13, 2.59-r7 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r1 sys-devel/binutils: 2.16.1-r3 sys-devel/gcc-config: 1.3.13-r3 sys-devel/libtool: 1.5.22 virtual/os-headers: 2.4.19, 2.6.11-r2 ACCEPT_KEYWORDS="x86" AUTOCLEAN="yes" CBUILD="i686-pc-linux-gnu" CFLAGS="-O2 -ggdb3 -march=athlon-xp -funroll-loops -fprefetch-loop-arrays -pipe" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/3.1/share/config /usr/kde/3.2/share/config /usr/kde/3.3/env /usr/kde/3.3/share/config /usr/kde/3.3/shutdown /usr/kde/3.4/env /usr/kde/3.4/share/config /usr/kde/3.4/shutdown /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/config" CONFIG_PROTECT_MASK="/etc/env.d /etc/gconf /etc/terminfo" CXXFLAGS="-O2 -ggdb3 -march=athlon-xp -funroll-loops -fprefetch-loop-arrays -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="autoconfig distlocks metadata-transfer nostrip sandbox sfperms strict" GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/linux/distributions/gentoo" MAKEOPTS="-j2" PKGDIR="/usr/portage/packages" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude='/distfiles' --exclude='/local' --exclude='/packages'" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="x86 X alsa apache2 apm arts avi berkdb bidi bitmap-fonts cli crypt cups dlloader dri dvd dvdread eds emboss encode esd faad foomaticdb fortran gdbm gif gimpprint gnome gpm gstreamer gtk gtk2 imlib ipv6 isdnlog jabber jpeg kde libg++ libwww mad matroska mikmod motif mp3 mpeg mysql ncurses nls nptl nptlonly ogg opengl oss pam pcre pdflib perl png ppds pppd python qt qt3 qt4 quicktime readline reflection sdl session spell spl ssl tcpd truetype truetype-fonts trutype type1-fonts udev unicode usb vorbis wxwindows xml xmms xorg xv yahoo zlib elibc_glibc input_devices_keyboard input_devices_mouse input_devices_evdev kernel_linux userland_GNU" Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY
my make.conf: Relevant details: USE="unicode apache2 dvd nls xv bidi trutype wxwindows imlib matroska faad png jabber yahoo cups foomaticdb ppds usb gimpprint mysql gnome gtk kde qt gif dvdread nptlonly" CHOST="i686-pc-linux-gnu" CFLAGS="-O2 -ggdb3 -march=athlon-xp -funroll-loops -fprefetch-loop-arrays -pipe" FEATURES="nostrip" CXXFLAGS="${CFLAGS}" MAKEOPTS="-j2" stubox stu# cat /etc/make.conf # Copyright 2000-2002 Daniel Robbins, Gentoo Technologies, Inc. # Contains local system settings for Portage system # Please review 'man make.conf' for more information. # Build-time functionality # ======================== # # The USE variable is used to enable optional build-time functionality. For # example, quite a few packages have optional X, gtk or GNOME functionality # that can only be enabled or disabled at compile-time. Gentoo Linux has a # very extensive set of USE variables described in our USE variable HOWTO at # http://www.gentoo.org/doc/use-howto.html # # The available list of use flags with descriptions is in your portage tree. # Use 'less' to view them: --> less /usr/portage/profiles/use.desc <-- # # Example: USE="unicode apache2 dvd nls xv bidi trutype wxwindows imlib matroska faad png jabber yahoo cups foomaticdb ppds usb gimpprint mysql gnome gtk kde qt gif dvdread nptlonly" #USE="qt kde -gnome -gtk " #USE="X gtk gnome -alsa" # Host Setting # ============ # # If you are using a Pentium Pro or greater processor, leave this line as-is; # otherwise, change to i586, i486 or i386 as appropriate. All modern systems # (even Athlons) should use "i686-pc-linux-gnu" # CHOST="i686-pc-linux-gnu" # Host and optimization settings # ============================== # # For optimal performance, enable a CFLAGS setting appropriate for your CPU # # -mcpu=<cpu-type> means optimize code for the particular type of CPU without # breaking compatibility with other CPUs. # # -march=<cpu-type> means to take full advantage of the ABI and instructions # for the particular CPU; this will break compatibility with older CPUs (for # example, -march=athlon-xp code will not run on a regular Athlon, and # -march=i686 code will not run on a Pentium Classic. # # CPU types supported in gcc-3.2 and higher: athlon-xp, athlon-mp, athlon-4, # athlon-tbird, athlon, k6, k6-2, k6-3, i386, i486, i586 (Pentium), i686 # (PentiumPro), pentium, pentium-mmx, pentiumpro, pentium2 (Celeron), pentium3, # and pentium4. Note that Gentoo Linux 1.4 and higher include at least gcc-3.2. # # CPU types supported in gcc-2.95*: k6, i386, i486, i586 (Pentium), i686 # (Pentium Pro), pentium, pentiumpro Gentoo Linux 1.2 and below use gcc-2.95* # # Decent examples: # #CFLAGS="-mcpu=athlon-xp -O3 -pipe" CFLAGS="-O2 -ggdb3 -march=athlon-xp -funroll-loops -fprefetch-loop-arrays -pipe" FEATURES="nostrip" # If you set a CFLAGS above, then this line will set your default C++ flags to # the same settings. If you don't set CFLAGS above, then comment this line out. CXXFLAGS="${CFLAGS}" # Advanced Masking # ================ # # Gentoo is using a new masking system to allow for easier stability testing # on packages. KEYWORDS are used in ebuilds to mask and unmask packages based # on the platform they are set for. A special form has been added that # indicates packages and revisions that are expected to work, but have not yet # been approved for the stable set. '~arch' is a superset of 'arch' which # includes the unstable, in testing, packages. Users of the 'x86' architecture # would add '~x86' to ACCEPT_KEYWORDS to enable unstable/testing packages. # '~ppc', '~sparc', '~sparc64' are the unstable KEYWORDS for their respective # platforms. DO NOT PUT ANYTHING BUT YOUR SPECIFIC ~ARCHITECTURE IN THE LIST. # IF YOU ARE UNSURE OF YOUR ARCH, OR THE IMPLICATIONS, DO NOT MODIFY THIS. # #ACCEPT_KEYWORDS="~x86" # Portage Directories # =================== # # Each of these settings controls an aspect of portage's storage and file # system usage. If you change any of these, be sure it is available when # you try to use portage. *** DO NOT INCLUDE A TRAILING "/" *** # # PORTAGE_TMPDIR is the location portage will use for compilations and # temporary storage of data. This can get VERY large depending upon # the application being installed. #PORTAGE_TMPDIR=/var/tmp # # PORTDIR is the location of the portage tree. This is the repository # for all profile information as well as all ebuilds. This directory # itself can reach 200M. WE DO NOT RECOMMEND that you change this. #PORTDIR=/usr/portage # # DISTDIR is where all of the source code tarballs will be placed for # emerges. The source code is maintained here unless you delete # it. The entire repository of tarballs for gentoo is 9G. This is # considerably more than any user will ever download. 2-3G is # a large DISTDIR. #DISTDIR=${PORTDIR}/distfiles # # PKGDIR is the location of binary packages that you can have created # with '--buildpkg' or '-b' while emerging a package. This can get # upto several hundred megs, or even a few gigs. #PKGDIR=${PORTDIR}/packages # # PORTDIR_OVERLAY is a directory where local ebuilds may be stored without # concern that they will be deleted by rsync updates. Default is not # defined. #PORTDIR_OVERLAY=/usr/local/portage # Fetching files # ============== # # If you need to set a proxy for wget or lukemftp, add the appropriate "export # ftp_proxy=<proxy>" and "export http_proxy=<proxy>" lines to /etc/profile if # all users on your system should use them. # # Portage uses wget by default. Here are some settings for some alternate # downloaders -- note that you need to merge these programs first before they # will be available. # # Lukemftp (BSD ftp): #FETCHCOMMAND="/usr/bin/lukemftp -s -a -o \${DISTDIR}/\${FILE} \${URI}" #RESUMECOMMAND="/usr/bin/lukemftp -s -a -R -o \${DISTDIR}/\${FILE} \${URI}" # # Prozilla (turbo downloader) #FETCHCOMMAND='/usr/bin/proz --no-getch -s ${URI} -P ${DISTDIR}' # Advanced Features # ================= # # MAKEOPTS provides extra options that may be passed to 'make' when a # program is compiled. Presently the only use is for specifying # the number of parallel makes (-j) to perform. The suggested number # for parallel makes is CPUs+1. MAKEOPTS="-j2" # # AUTOCLEAN enables portage to automatically clean out older or overlapping # packages from the system after every successful merge. This is the # same as running 'emerge -c' after every merge. Set with: "yes" or "no". #AUTOCLEAN="yes" # # FEATURES are settings that affect the functionality of portage. Most of # these settings are for developer use, but some are available to non- # developers as well. 'buildpkg' is an always-on setting for the emerge # flag of the same name. It causes binary packages to be created of all # packages that are merged. #FEATURES="sandbox ccache buildpkg" # # RSYNC_RETRIES sets the number of times portage will attempt to retrieve # a current portage tree before it exits with an error. This allows # for a more successful retrieval without user intervention most times. #RSYNC_RETRIES="3"
Don't use -ggdb3... *** This bug has been marked as a duplicate of 118301 ***
Gracias, I been using it for awhile, so I didn't even think of that (or do any searches based on that). I'll stick with -g2.
