First occurred during a revdep-rebuild, then persists despite disabling sandbox. Cleaning /var/tmp/portage before emerging was no help. dexsys dex # FEATURES="-sandbox" emerge stldb4 Calculating dependencies ...done! >>> emerge (1 of 1) dev-db/stldb4-0.3.13 to / mv: cannot stat `/var/tmp/portage/stldb4-0.3.13/temp/environment': No such file or directory >>> md5 files ;-) stldb4-0.3.13.ebuild >>> md5 files ;-) stldb4-0.3.7.ebuild >>> md5 files ;-) files/digest-stldb4-0.3.13 >>> md5 files ;-) files/digest-stldb4-0.3.7 >>> md5 src_uri ;-) stldb4-0.3.13.tar.bz2 >>> Checking stldb4-0.3.13.tar.bz2's mtime... >>> WORKDIR is up-to-date, keeping... >>> It appears that stldb4 is already compiled; skipping. >>> (clean to force compilation) >>> It appears that stldb4 has already been tested; skipping. >>> Install stldb4-0.3.13 into /var/tmp/portage/stldb4-0.3.13/image/ category dev-db Making install in db-4.1.25 make[1]: Entering directory `/var/tmp/portage/stldb4-0.3.13/work/stldb4-0.3.13/db-4.1.25' Making install in dist make[2]: Entering directory `/var/tmp/portage/stldb4-0.3.13/work/stldb4-0.3.13/db-4.1.25/dist' Installing DB include files: /usr/include/STLdb4 ... ACCESS DENIED unlink: /usr/include/STLdb4/stldbraw.h rm: cannot remove `stldbraw.h': Permission denied make[2]: *** [install_include] Error 1 make[2]: Leaving directory `/var/tmp/portage/stldb4-0.3.13/work/stldb4-0.3.13/db-4.1.25/dist' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/stldb4-0.3.13/work/stldb4-0.3.13/db-4.1.25' make: *** [install-recursive] Error 1 !!! ERROR: dev-db/stldb4-0.3.13 failed. !!! Function src_install, Line 33, Exitcode 2 !!! (no error message) !!! If you need support, post the topmost build error, NOT this status message. --------------------------- ACCESS VIOLATION SUMMARY --------------------------- LOG FILE = "/var/log/sandbox/sandbox-dev-db_-_stldb4-0.3.13-1197.log" unlink: /usr/include/STLdb4/stldbraw.h -------------------------------------------------------------------------------- Reproducible: Always Steps to Reproduce: 1. revdep-rebuild 2. access violation with emerge of stldb4 3. will not emerge seperately despite disabling sandbox Actual Results: stldb4 stops revdep-rebuild process due to an access violation when emerging, error indicates it occurs when trying to unlink /usr/include/STLdb4/stldbraw.h. Expected Results: Package stldb4 should rebuild successfully.
you neglected to post `emerge info --verbose`
dexsys dex # emerge --verbose stldb4 Calculating dependencies ...done! >>> emerge (1 of 1) dev-db/stldb4-0.3.13 to / mv: cannot stat `/var/tmp/portage/stldb4-0.3.13/temp/environment': No such file or directory >>> md5 files ;-) stldb4-0.3.13.ebuild >>> md5 files ;-) stldb4-0.3.7.ebuild >>> md5 files ;-) files/digest-stldb4-0.3.13 >>> md5 files ;-) files/digest-stldb4-0.3.7 >>> md5 src_uri ;-) stldb4-0.3.13.tar.bz2 >>> Checking stldb4-0.3.13.tar.bz2's mtime... >>> WORKDIR is up-to-date, keeping... >>> It appears that stldb4 is already compiled; skipping. >>> (clean to force compilation) >>> It appears that stldb4 has already been tested; skipping. >>> Install stldb4-0.3.13 into /var/tmp/portage/stldb4-0.3.13/image/ category dev-db Making install in db-4.1.25 make[1]: Entering directory `/var/tmp/portage/stldb4-0.3.13/work/stldb4-0.3.13/db-4.1.25' Making install in dist make[2]: Entering directory `/var/tmp/portage/stldb4-0.3.13/work/stldb4-0.3.13/db-4.1.25/dist' Installing DB include files: /usr/include/STLdb4 ... ACCESS DENIED unlink: /usr/include/STLdb4/stldbraw.h rm: cannot remove `stldbraw.h': Permission denied make[2]: *** [install_include] Error 1 make[2]: Leaving directory `/var/tmp/portage/stldb4-0.3.13/work/stldb4-0.3.13/db-4.1.25/dist' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/stldb4-0.3.13/work/stldb4-0.3.13/db-4.1.25' make: *** [install-recursive] Error 1 !!! ERROR: dev-db/stldb4-0.3.13 failed. !!! Function src_install, Line 33, Exitcode 2 !!! (no error message) !!! If you need support, post the topmost build error, NOT this status message. --------------------------- ACCESS VIOLATION SUMMARY --------------------------- LOG FILE = "/var/log/sandbox/sandbox-dev-db_-_stldb4-0.3.13-31172.log" unlink: /usr/include/STLdb4/stldbraw.h -------------------------------------------------------------------------------- dexsys dex # emerge --info Portage 2.0.51.22-r2 (default-linux/x86/2005.0, gcc-3.4.4, glibc-2.3.5-r1, 2.6.13-rc5 i686) ================================================================= System uname: 2.6.13-rc5 i686 AMD Athlon(tm) XP 2800+ Gentoo Base System version 1.6.13 dev-lang/python: 2.3.5, 2.4.1-r1 sys-apps/sandbox: 1.2.11 sys-devel/autoconf: 2.13, 2.59-r7 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6 sys-devel/binutils: 2.16.1 sys-devel/libtool: 1.5.18-r1 virtual/os-headers: 2.6.11-r2 ACCEPT_KEYWORDS="x86 ~x86" AUTOCLEAN="yes" CBUILD="i686-pc-linux-gnu" CFLAGS="-march=athlon-xp -pipe -fomit-frame-pointer -O3" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/X11R6/lib/X11/xkb /usr/kde/2/share/config /usr/kde/3.1/share/config /usr/kde/3.3/env /usr/kde/3.3/share/config /usr/kde/3.3/shutdown /usr/kde/3.4/env /usr/kde/3.4/share/config /usr/kde/3.4/shutdown /usr/kde/3/share/config /usr/lib/X11/xkb /usr/lib/mozilla/defaults/pref /usr/share/config /usr/share/texmf/tex/generic/config /usr/share/texmf/tex/platex/config /var/qmail/control" CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/texmf/web2c /etc/env.d" CXXFLAGS="-march=athlon-xp -pipe -fomit-frame-pointer -O3" DISTDIR="/usr/portage/distfiles" FEATURES="autoconfig ccache cvs distcc distlocks keeptemp keepwork noauto noclean notitles sandbox sfperms strict userpriv usersandbox" GENTOO_MIRRORS="ftp://mirrors.tds.net/gentoo" MAKEOPTS="-j2" PKGDIR="/usr/portage/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="x86 X aalib acpi alsa apache2 apm arts avi berkdb bitmap-fonts bonobo cdr crypt cups curl dga directfb doc dvd eds emboss encode esd fam fbcon flac flash foomaticdb fortran freetds gd gdbm gif gnome gpm gps gstreamer gtk gtk2 gtkhtml guile imagemagick imap imlib innodb ipv6 jack java jikes jpeg junit kde ladcca lcms libg++ libwww mad mikmod mmx motif mozilla mp3 mpeg mysql ncurses nls nptl odbc ogg oggvorbis opengl oss pam pdflib perl png ppds python qt quicktime readline samba scanner sdl slang slp snmp softmmu speex spell sse ssl svga tcltk tcpd tetex tiff truetype truetype-fonts type1-fonts usb vorbis xine xml xml2 xmms xv zlib video_cards_radeon userland_GNU kernel_linux elibc_glibc" Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS
dexsys dex # FEATURES="-sandbox" emerge --verbose stldb4 Calculating dependencies ...done! >>> emerge (1 of 1) dev-db/stldb4-0.3.13 to / mv: cannot stat `/var/tmp/portage/stldb4-0.3.13/temp/environment': No such file or directory >>> md5 files ;-) stldb4-0.3.13.ebuild >>> md5 files ;-) stldb4-0.3.7.ebuild >>> md5 files ;-) files/digest-stldb4-0.3.13 >>> md5 files ;-) files/digest-stldb4-0.3.7 >>> md5 src_uri ;-) stldb4-0.3.13.tar.bz2 >>> Checking stldb4-0.3.13.tar.bz2's mtime... >>> WORKDIR is up-to-date, keeping... >>> It appears that stldb4 is already compiled; skipping. >>> (clean to force compilation) >>> It appears that stldb4 has already been tested; skipping. >>> Install stldb4-0.3.13 into /var/tmp/portage/stldb4-0.3.13/image/ category dev-db Making install in db-4.1.25 make[1]: Entering directory `/var/tmp/portage/stldb4-0.3.13/work/stldb4-0.3.13/db-4.1.25' Making install in dist make[2]: Entering directory `/var/tmp/portage/stldb4-0.3.13/work/stldb4-0.3.13/db-4.1.25/dist' Installing DB include files: /usr/include/STLdb4 ... ACCESS DENIED unlink: /usr/include/STLdb4/stldbraw.h rm: cannot remove `stldbraw.h': Permission denied make[2]: *** [install_include] Error 1 make[2]: Leaving directory `/var/tmp/portage/stldb4-0.3.13/work/stldb4-0.3.13/db-4.1.25/dist' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/stldb4-0.3.13/work/stldb4-0.3.13/db-4.1.25' make: *** [install-recursive] Error 1 !!! ERROR: dev-db/stldb4-0.3.13 failed. !!! Function src_install, Line 33, Exitcode 2 !!! (no error message) !!! If you need support, post the topmost build error, NOT this status message. --------------------------- ACCESS VIOLATION SUMMARY --------------------------- LOG FILE = "/var/log/sandbox/sandbox-dev-db_-_stldb4-0.3.13-31345.log" unlink: /usr/include/STLdb4/stldbraw.h --------------------------------------------------------------------------------
has nothing to do with stldb4 take keepwork and keeptemp out of your FEATURES
As Spanky said. You can't override FEATURES while using keeptemp.
As I stated in my original report I had cleared out /var/tmp/portage to make sure I was building clean. Still, as you'll see below, I followed your advice and removed keepwork and keeptemp from my features. I also again made sure to remove all build files and again emerged with FEATURES="-sandbox". dexsys portage # emerge --info Portage 2.0.51.22-r2 (default-linux/x86/2005.0, gcc-3.4.4, glibc-2.3.5-r1, 2.6.13-rc5 i686) ================================================================= System uname: 2.6.13-rc5 i686 AMD Athlon(tm) XP 2800+ Gentoo Base System version 1.6.13 dev-lang/python: 2.3.5, 2.4.1-r1 sys-apps/sandbox: 1.2.11 sys-devel/autoconf: 2.13, 2.59-r7 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6 sys-devel/binutils: 2.16.1 sys-devel/libtool: 1.5.18-r1 virtual/os-headers: 2.6.11-r2 ACCEPT_KEYWORDS="x86 ~x86" AUTOCLEAN="yes" CBUILD="i686-pc-linux-gnu" CFLAGS="-march=athlon-xp -pipe -fomit-frame-pointer -O3" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/X11R6/lib/X11/xkb /usr/kde/2/share/config /usr/kde/3.1/share/config /usr/kde/3.3/env /usr/kde/3.3/share/config /usr/kde/3.3/shutdown /usr/kde/3.4/env /usr/kde/3.4/share/config /usr/kde/3.4/shutdown /usr/kde/3/share/config /usr/lib/X11/xkb /usr/lib/mozilla/defaults/pref /usr/share/config /usr/share/texmf/tex/generic/config /usr/share/texmf/tex/platex/config /var/qmail/control" CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/texmf/web2c /etc/env.d" CXXFLAGS="-march=athlon-xp -pipe -fomit-frame-pointer -O3" DISTDIR="/usr/portage/distfiles" FEATURES="autoconfig ccache cvs distcc distlocks noauto noclean notitles sandbox sfperms strict userpriv usersandbox" GENTOO_MIRRORS="ftp://mirrors.tds.net/gentoo" MAKEOPTS="-j2" PKGDIR="/usr/portage/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="x86 X aalib acpi alsa apache2 apm arts avi berkdb bitmap-fonts bonobo cdr crypt cups curl dga directfb doc dvd eds emboss encode esd fam fbcon flac flash foomaticdb fortran freetds gd gdbm gif gnome gpm gps gstreamer gtk gtk2 gtkhtml guile imagemagick imap imlib innodb ipv6 jack java jikes jpeg junit kde ladcca lcms libg++ libwww mad mikmod mmx motif mozilla mp3 mpeg mysql ncurses nls nptl odbc ogg oggvorbis opengl oss pam pdflib perl png ppds python qt quicktime readline samba scanner sdl slang slp snmp softmmu speex spell sse ssl svga tcltk tcpd tetex tiff truetype truetype-fonts type1-fonts usb vorbis xine xml xml2 xmms xv zlib video_cards_radeon userland_GNU kernel_linux elibc_glibc" Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS Installing DB include files: /usr/include/STLdb4 ... ACCESS DENIED unlink: /usr/include/STLdb4/stldbraw.h rm: cannot remove `stldbraw.h': Permission denied make[2]: *** [install_include] Error 1 make[2]: Leaving directory `/var/tmp/portage/stldb4-0.3.13/work/stldb4-0.3.13/db-4.1.25/dist' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/stldb4-0.3.13/work/stldb4-0.3.13/db-4.1.25' make: *** [install-recursive] Error 1 !!! ERROR: dev-db/stldb4-0.3.13 failed. !!! Function src_install, Line 33, Exitcode 2 !!! (no error message) !!! If you need support, post the topmost build error, NOT this status message. --------------------------- ACCESS VIOLATION SUMMARY --------------------------- LOG FILE = "/var/log/sandbox/sandbox-dev-db_-_stldb4-0.3.13-13431.log" unlink: /usr/include/STLdb4/stldbraw.h -------------------------------------------------------------------------------- I also tried disabling sandbox in my make.conf and cleaning /var/tmp/portage: dexsys portage # emerge --info Portage 2.0.51.22-r2 (default-linux/x86/2005.0, gcc-3.4.4, glibc-2.3.5-r1, 2.6.13-rc5 i686) ================================================================= System uname: 2.6.13-rc5 i686 AMD Athlon(tm) XP 2800+ Gentoo Base System version 1.6.13 dev-lang/python: 2.3.5, 2.4.1-r1 sys-apps/sandbox: 1.2.11 sys-devel/autoconf: 2.13, 2.59-r7 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6 sys-devel/binutils: 2.16.1 sys-devel/libtool: 1.5.18-r1 virtual/os-headers: 2.6.11-r2 ACCEPT_KEYWORDS="x86 ~x86" AUTOCLEAN="yes" CBUILD="i686-pc-linux-gnu" CFLAGS="-march=athlon-xp -pipe -fomit-frame-pointer -O3" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/X11R6/lib/X11/xkb /usr/kde/2/share/config /usr/kde/3.1/share/config /usr/kde/3.3/env /usr/kde/3.3/share/config /usr/kde/3.3/shutdown /usr/kde/3.4/env /usr/kde/3.4/share/config /usr/kde/3.4/shutdown /usr/kde/3/share/config /usr/lib/X11/xkb /usr/lib/mozilla/defaults/pref /usr/share/config /usr/share/texmf/tex/generic/config /usr/share/texmf/tex/platex/config /var/qmail/control" CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/texmf/web2c /etc/env.d" CXXFLAGS="-march=athlon-xp -pipe -fomit-frame-pointer -O3" DISTDIR="/usr/portage/distfiles" FEATURES="autoconfig ccache cvs distcc distlocks noauto noclean notitles sfperms strict userpriv usersandbox" GENTOO_MIRRORS="ftp://mirrors.tds.net/gentoo" MAKEOPTS="-j2" PKGDIR="/usr/portage/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="x86 X aalib acpi alsa apache2 apm arts avi berkdb bitmap-fonts bonobo cdr crypt cups curl dga directfb doc dvd eds emboss encode esd fam fbcon flac flash foomaticdb fortran freetds gd gdbm gif gnome gpm gps gstreamer gtk gtk2 gtkhtml guile imagemagick imap imlib innodb ipv6 jack java jikes jpeg junit kde ladcca lcms libg++ libwww mad mikmod mmx motif mozilla mp3 mpeg mysql ncurses nls nptl odbc ogg oggvorbis opengl oss pam pdflib perl png ppds python qt quicktime readline samba scanner sdl slang slp snmp softmmu speex spell sse ssl svga tcltk tcpd tetex tiff truetype truetype-fonts type1-fonts usb vorbis xine xml xml2 xmms xv zlib video_cards_radeon userland_GNU kernel_linux elibc_glibc" Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS Installing DB include files: /usr/include/STLdb4 ... ACCESS DENIED unlink: /usr/include/STLdb4/stldbraw.h rm: cannot remove `stldbraw.h': Permission denied make[2]: *** [install_include] Error 1 make[2]: Leaving directory `/var/tmp/portage/stldb4-0.3.13/work/stldb4-0.3.13/db-4.1.25/dist' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/stldb4-0.3.13/work/stldb4-0.3.13/db-4.1.25' make: *** [install-recursive] Error 1 !!! ERROR: dev-db/stldb4-0.3.13 failed. !!! Function src_install, Line 33, Exitcode 2 !!! (no error message) !!! If you need support, post the topmost build error, NOT this status message. --------------------------- ACCESS VIOLATION SUMMARY --------------------------- LOG FILE = "/var/log/sandbox/sandbox-dev-db_-_stldb4-0.3.13-14086.log" unlink: /usr/include/STLdb4/stldbraw.h -------------------------------------------------------------------------------- But I finally did get it to compile when I also disabled usersandbox, so the problem was not with stldb4.
