/var/log/dmesg

dmesg (text/plain), 30.08 KB, created by Gerard van Vuuren on 2008-04-30 22:09:38 UTC

 MCFG BFF89B30, 003C (r1 A_M_I_ OEMMCFG   3000707 MSFT       97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c4000000 (gap: c0000000:3fb00000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1300480
Kernel command line: root=/dev/ram0 init=/linuxrc  dokeymap looptype=squashfs loop=/image.squashfs  cdroot vga=7910
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0575000 soft=c0535000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2404.177 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4139180k/5242880k available (2741k kernel code, 53288k reserved, 1197k data, 328k init, 3276288k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc74000 - 0xfffff000   (3628 kB)
    pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
    vmalloc : 0xf8800000 - 0xff9fe000   ( 113 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc04df000 - 0xc0531000   ( 328 kB)
      .data : 0xc03ad50c - 0xc04d8bc4   (1197 kB)
      .text : 0xc0100000 - 0xc03ad50c   (2741 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet clockevent registered
Calibrating delay using timer specific routine.. 4811.09 BogoMIPS (lpj=24055498)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c0576000 soft=c0536000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4131.64 BogoMIPS (lpj=20658223)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
Total of 2 processors activated (8942.74 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
CPU0 attaching sched-domain:
 domain 0: span 00000000,00000003
  groups: 00000000,00000001 00000000,00000002
CPU1 attaching sched-domain:
 domain 0: span 00000000,00000003
  groups: 00000000,00000002 00000000,00000001
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  8464.000 MB/sec
xor: using function: pIII_sse (8464.000 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
system 00:06: ioport range 0x290-0x297 has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x400-0x41f has been reserved
system 00:07: ioport range 0x480-0x4bf has been reserved
system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved
system 00:07: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xdffff could not be reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0xbfffffff could not be reserved
system 00:0d: iomem range 0x0-0x0 could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: c000-cfff
  MEM window: faa00000-feafffff
  PREFETCH window: cff00000-efefffff
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: cfe00000-cfefffff
PCI: Bridge: 0000:00:1c.3
  IO window: b000-bfff
  MEM window: fa900000-fa9fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
  IO window: a000-afff
  MEM window: fa800000-fa8fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: 9000-9fff
  MEM window: fa700000-fa7fffff
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 6246k freed
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1209598143.220:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.3 (2007/10/31) Phillip Lougher
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Boot video device is 0000:05:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
hpet_resources: 0xfed00000 is busy
Generic RTC Driver v1.07
intel_rng: FWH not detected
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3072k, total 262144k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:c300
vesafb: pmi: set display start = c00cc336, set palette = c00cc3a0
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller (0x8086:0x27df rev 0x01) at  PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 19
ICH7: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hdb: Optiarc DVD RW AD-7173A, ATAPI CD/DVD-ROM drive
hda: TSSTcorpDVD-ROM SH-D162C, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/66 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: ATAPI 47X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.20
hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
PCI: Enabling device 0000:02:00.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.1 to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 16
ata2: PATA max UDMA/100 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 16
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: int32x1    886 MB/s
input: PS2++ Logitech TrackMan as /devices/platform/i8042/serio1/input/input2
raid6: int32x2    975 MB/s
raid6: int32x4    725 MB/s
raid6: int32x8    686 MB/s
raid6: mmxx1     3103 MB/s
raid6: mmxx2     3191 MB/s
raid6: sse1x1    1895 MB/s
raid6: sse1x2    2495 MB/s
raid6: sse2x1    3673 MB/s
raid6: sse2x2    4131 MB/s
raid6: using algorithm sse2x2 (4131 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
cpuidle: using governor ladder
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 328k freed
ata1: soft resetting link
ata1: EH complete
usbhid: Unknown symbol usb_alloc_urb
usbhid: Unknown symbol usb_free_urb
usbhid: Unknown symbol usb_register_driver
usbhid: Unknown symbol usb_reset_composite_device
usbhid: Unknown symbol usb_clear_halt
usbhid: Unknown symbol usb_submit_urb
usbhid: Unknown symbol usb_control_msg
usbhid: Unknown symbol usb_register_dev
usbhid: Unknown symbol usb_deregister
usbhid: Unknown symbol usb_lock_device_for_reset
usbhid: Unknown symbol usb_string
usbhid: Unknown symbol usb_deregister_dev
usbhid: Unknown symbol usb_kill_urb
usbhid: Unknown symbol usb_buffer_free
usbhid: Unknown symbol input_ff_create_memless
usbhid: Unknown symbol __usb_get_extra_descriptor
usbhid: Unknown symbol usb_buffer_alloc
ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[fa7ff800-fa7fffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
pata_pcmcia: Unknown symbol cs_error
pata_pcmcia: Unknown symbol pcmcia_disable_device
pata_pcmcia: Unknown symbol pcmcia_unregister_driver
pata_pcmcia: Unknown symbol pccard_get_first_tuple
pata_pcmcia: Unknown symbol pcmcia_get_configuration_info
pata_pcmcia: Unknown symbol pcmcia_request_io
pata_pcmcia: Unknown symbol pcmcia_request_configuration
pata_pcmcia: Unknown symbol pccard_get_tuple_data
pata_pcmcia: Unknown symbol pcmcia_register_driver
pata_pcmcia: Unknown symbol pccard_parse_tuple
pata_pcmcia: Unknown symbol pccard_get_next_tuple
pata_pcmcia: Unknown symbol pcmcia_request_irq
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 21
ahci 0000:00:1f.2: enabling ASUS P5W DH Deluxe on-board SIMG4726 workaround
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80001043639]
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part 
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfebff800 port 0xfebff900 irq 219
ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 219
ata5: SATA max UDMA/133 abar m1024@0xfebff800 port 0xfebffa00 irq 219
ata6: SATA max UDMA/133 abar m1024@0xfebff800 port 0xfebffa80 irq 219
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7
ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-6: Config  Disk, RGL10364, max UDMA/133
ata4.00: 640 sectors, multi 1: LBA 
ata4.00: device is on DMA blacklist, disabling DMA
ata4.00: configured for PIO4
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7
ata5.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 2:0:0:0: [sda] Attached SCSI disk
scsi 3:0:0:0: Direct-Access     ATA      Config  Disk     RGL1 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdb: unknown partition table
sd 3:0:0:0: [sdb] Attached SCSI disk
scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1 sdc2 sdc3
sd 4:0:0:0: [sdc] Attached SCSI disk
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 18
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
PCI: Setting latency timer of device 0000:02:00.0 to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfa8fe000 port 0xfa8fe100 irq 18
ata8: SATA max UDMA/133 abar m8192@0xfa8fe000 port 0xfa8fe180 irq 18
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.14)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [e-mail]
md: raid10 personality registered for level 10
UDF-fs: No VRS found
UDF-fs: No VRS found
attempt to access beyond end of device
sda4: rw=0, want=18, limit=2
ReiserFS: sda4: warning: sh-2006: read_super_block: bread failed (dev sda4, block 8, size 1024)
attempt to access beyond end of device
sda4: rw=0, want=130, limit=2
ReiserFS: sda4: warning: sh-2006: read_super_block: bread failed (dev sda4, block 64, size 1024)
attempt to access beyond end of device
sda4: rw=0, want=4, limit=2
EXT3-fs: unable to read superblock
attempt to access beyond end of device
sda4: rw=0, want=4, limit=2
EXT2-fs: unable to read superblock
attempt to access beyond end of device
sda4: rw=0, want=66, limit=2
isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32
attempt to access beyond end of device
sda4: rw=0, want=68, limit=2
attempt to access beyond end of device
sda4: rw=0, want=1252, limit=2
attempt to access beyond end of device
sda4: rw=0, want=1028, limit=2
UDF-fs: No partition found (1)
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen
ata4.00: irq_stat 0x00400000, PHY RDY changed
ata4: SError: { PHYRdyChg }
ata4.00: cmd c4/00:02:4c:00:00/00:00:00:00:00/e0 tag 0 pio 1024 in
         res 50/00:00:01:01:80/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link down (SStatus 0 SControl 300)
ata4: failed to recover some devices, retrying in 5 secs
ata4: hard resetting link
ata4: SATA link down (SStatus 0 SControl 300)
ata4: failed to recover some devices, retrying in 5 secs
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: device is on DMA blacklist, disabling DMA
ata4.00: configured for PIO4
ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
ata4: irq_stat 0x00000040, connection status changed
ata4.00: device is on DMA blacklist, disabling DMA
ata4.00: configured for PIO4
ata4: EH complete
ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen
ata4.00: irq_stat 0x00400000, PHY RDY changed
ata4: SError: { PHYRdyChg }
ata4.00: cmd c4/00:02:4c:00:00/00:00:00:00:00/e0 tag 0 pio 1024 in
         res 50/00:00:01:01:80/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link down (SStatus 0 SControl 300)
ata4: failed to recover some devices, retrying in 5 secs
ata4: hard resetting link
ata4: SATA link down (SStatus 0 SControl 300)
ata4: failed to recover some devices, retrying in 5 secs
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: device is on DMA blacklist, disabling DMA
ata4.00: configured for PIO4
ata4: limiting SATA link speed to 1.5 Gbps
ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xd t4
ata4: irq_stat 0x00000040, connection status changed
ata4: hard resetting link
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata4.00: device is on DMA blacklist, disabling DMA
ata4.00: configured for PIO4
ata4: EH complete
ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen
ata4.00: irq_stat 0x00400000, PHY RDY changed
ata4: SError: { PHYRdyChg }
ata4.00: cmd c4/00:02:4c:00:00/00:00:00:00:00/e0 tag 0 pio 1024 in
         res 50/00:00:01:01:80/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link down (SStatus 0 SControl 310)
ata4: failed to recover some devices, retrying in 5 secs
ata4: hard resetting link
ata4: SATA link down (SStatus 0 SControl 310)
ata4: failed to recover some devices, retrying in 5 secs
ata4: hard resetting link
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata4.00: device is on DMA blacklist, disabling DMA
ata4.00: configured for PIO4
ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
ata4: irq_stat 0x00000040, connection status changed
ata4.00: device is on DMA blacklist, disabling DMA
ata4.00: configured for PIO4
ata4: EH complete
sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen
ata4.00: irq_stat 0x00400000, PHY RDY changed
ata4: SError: { PHYRdyChg }
ata4.00: cmd c4/00:02:b0:00:00/00:00:00:00:00/e0 tag 0 pio 1024 in
         res 50/00:00:01:01:80/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link down (SStatus 0 SControl 310)
ata4: failed to recover some devices, retrying in 5 secs
ata4: hard resetting link
ata4: SATA link down (SStatus 0 SControl 310)
ata4: failed to recover some devices, retrying in 5 secs
ata4: hard resetting link
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata4.00: device is on DMA blacklist, disabling DMA
ata4.00: configured for PIO4
ata4.00: limiting speed to PIO3
ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xb t4
ata4: irq_stat 0x00000040, connection status changed
ata4: hard resetting link
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata4.00: device is on DMA blacklist, disabling DMA
ata4.00: configured for PIO3
ata4: EH complete
sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen
ata4.00: irq_stat 0x00400000, PHY RDY changed
ata4: SError: { PHYRdyChg }
ata4.00: cmd c4/00:02:d0:00:00/00:00:00:00:00/e0 tag 0 pio 1024 in
         res 50/00:00:01:01:80/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link down (SStatus 0 SControl 310)
ata4: failed to recover some devices, retrying in 5 secs
ata4: hard resetting link
ata4: SATA link down (SStatus 0 SControl 310)
ata4: failed to recover some devices, retrying in 5 secs
ata4: hard resetting link
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata4.00: device is on DMA blacklist, disabling DMA
ata4.00: configured for PIO3
ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
ata4: irq_stat 0x00000040, connection status changed
ata4.00: device is on DMA blacklist, disabling DMA
ata4.00: configured for PIO3
ata4: EH complete
sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen
ata4.00: irq_stat 0x00400000, PHY RDY changed
ata4: SError: { PHYRdyChg }
ata4.00: cmd c4/00:02:e0:00:00/00:00:00:00:00/e0 tag 0 pio 1024 in
         res 50/00:00:01:01:80/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link down (SStatus 0 SControl 310)
ata4: failed to recover some devices, retrying in 5 secs
ata4: hard resetting link
ata4: SATA link down (SStatus 0 SControl 310)
ata4: failed to recover some devices, retrying in 5 secs
ata4: hard resetting link
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata4.00: device is on DMA blacklist, disabling DMA
ata4.00: configured for PIO3
ata4.00: limiting speed to PIO0
ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xb t4
ata4: irq_stat 0x00000040, connection status changed
ata4: hard resetting link
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata4.00: device is on DMA blacklist, disabling DMA
ata4.00: configured for PIO0
ata4: EH complete
sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen
ata4.00: irq_stat 0x00400000, PHY RDY changed
ata4: SError: { PHYRdyChg }
ata4.00: cmd c4/00:02:f0:00:00/00:00:00:00:00/e0 tag 0 pio 1024 in
         res 50/00:00:01:01:80/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link down (SStatus 0 SControl 310)
ata4: failed to recover some devices, retrying in 5 secs
ata4: hard resetting link
ata4: SATA link down (SStatus 0 SControl 310)
ata4: failed to recover some devices, retrying in 5 secs
ata4: hard resetting link
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata4.00: device is on DMA blacklist, disabling DMA
ata4.00: configured for PIO0
ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
ata4: irq_stat 0x00000040, connection status changed
ata4.00: device is on DMA blacklist, disabling DMA
ata4.00: configured for PIO0
ata4: EH complete
sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
attempt to access beyond end of device
sdb: rw=0, want=1252, limit=640
attempt to access beyond end of device
sdb: rw=0, want=1028, limit=640
UDF-fs: No partition found (1)
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A