MCFG BFF89B30, 003C (r1 A_M_I_ OEMMCFG 3000707 MSFT 97) ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c4000000 (gap: c0000000:3fb00000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1300480 Kernel command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot vga=7910 mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0575000 soft=c0535000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2404.177 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 4139180k/5242880k available (2741k kernel code, 53288k reserved, 1197k data, 328k init, 3276288k highmem) virtual kernel memory layout: fixmap : 0xffc74000 - 0xfffff000 (3628 kB) pkmap : 0xffa00000 - 0xffc00000 (2048 kB) vmalloc : 0xf8800000 - 0xff9fe000 ( 113 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc04df000 - 0xc0531000 ( 328 kB) .data : 0xc03ad50c - 0xc04d8bc4 (1197 kB) .text : 0xc0100000 - 0xc03ad50c (2741 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet clockevent registered Calibrating delay using timer specific routine.. 4811.09 BogoMIPS (lpj=24055498) Security Framework initialized Capability LSM initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c0576000 soft=c0536000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4131.64 BogoMIPS (lpj=20658223) CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 Total of 2 processors activated (8942.74 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 00000000,00000003 groups: 00000000,00000001 00000000,00000002 CPU1 attaching sched-domain: domain 0: span 00000000,00000003 groups: 00000000,00000002 00000000,00000001 net_namespace: 64 bytes Booting paravirtualized kernel on bare hardware xor: automatically using best checksumming function: pIII_sse pIII_sse : 8464.000 MB/sec xor: using function: pIII_sse (8464.000 MB/sec) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved system 00:06: ioport range 0x290-0x297 has been reserved system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:07: ioport range 0x800-0x87f has been reserved system 00:07: ioport range 0x400-0x41f has been reserved system 00:07: ioport range 0x480-0x4bf has been reserved system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved system 00:07: iomem range 0xfff00000-0xffffffff could not be reserved system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xdffff could not be reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0xbfffffff could not be reserved system 00:0d: iomem range 0x0-0x0 could not be reserved PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: faa00000-feafffff PREFETCH window: cff00000-efefffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: cfe00000-cfefffff PCI: Bridge: 0000:00:1c.3 IO window: b000-bfff MEM window: fa900000-fa9fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.5 IO window: a000-afff MEM window: fa800000-fa8fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 9000-9fff MEM window: fa700000-fa7fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 6246k freed Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1209598143.220:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 3.3 (2007/10/31) Phillip Lougher async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Boot video device is 0000:05:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] PCI: Setting latency timer of device 0000:00:1c.5 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.5:pcie00] hpet_resources: 0xfed00000 is busy Generic RTC Driver v1.07 intel_rng: FWH not detected vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3072k, total 262144k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:c300 vesafb: pmi: set display start = c00cc336, set palette = c00cc3a0 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller (0x8086:0x27df rev 0x01) at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 19 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hdb: Optiarc DVD RW AD-7173A, ATAPI CD/DVD-ROM drive hda: TSSTcorpDVD-ROM SH-D162C, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/66 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: ATAPI 47X DVD-ROM drive, 256kB Cache Uniform CD-ROM driver Revision: 3.20 hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Loading iSCSI transport class v2.0-724. iscsi: registered transport (tcp) Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods PCI: Enabling device 0000:02:00.1 (0000 -> 0001) ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.1 to 64 scsi0 : pata_jmicron scsi1 : pata_jmicron ata1: PATA max UDMA/100 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 16 ata2: PATA max UDMA/100 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 16 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid6: int32x1 886 MB/s input: PS2++ Logitech TrackMan as /devices/platform/i8042/serio1/input/input2 raid6: int32x2 975 MB/s raid6: int32x4 725 MB/s raid6: int32x8 686 MB/s raid6: mmxx1 3103 MB/s raid6: mmxx2 3191 MB/s raid6: sse1x1 1895 MB/s raid6: sse1x2 2495 MB/s raid6: sse2x1 3673 MB/s raid6: sse2x2 4131 MB/s raid6: using algorithm sse2x2 (4131 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 cpuidle: using governor ladder TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 328k freed ata1: soft resetting link ata1: EH complete usbhid: Unknown symbol usb_alloc_urb usbhid: Unknown symbol usb_free_urb usbhid: Unknown symbol usb_register_driver usbhid: Unknown symbol usb_reset_composite_device usbhid: Unknown symbol usb_clear_halt usbhid: Unknown symbol usb_submit_urb usbhid: Unknown symbol usb_control_msg usbhid: Unknown symbol usb_register_dev usbhid: Unknown symbol usb_deregister usbhid: Unknown symbol usb_lock_device_for_reset usbhid: Unknown symbol usb_string usbhid: Unknown symbol usb_deregister_dev usbhid: Unknown symbol usb_kill_urb usbhid: Unknown symbol usb_buffer_free usbhid: Unknown symbol input_ff_create_memless usbhid: Unknown symbol __usb_get_extra_descriptor usbhid: Unknown symbol usb_buffer_alloc ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 20 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[fa7ff800-fa7fffff] Max Packet=[2048] IR/IT contexts=[4/8] pata_pcmcia: Unknown symbol cs_error pata_pcmcia: Unknown symbol pcmcia_disable_device pata_pcmcia: Unknown symbol pcmcia_unregister_driver pata_pcmcia: Unknown symbol pccard_get_first_tuple pata_pcmcia: Unknown symbol pcmcia_get_configuration_info pata_pcmcia: Unknown symbol pcmcia_request_io pata_pcmcia: Unknown symbol pcmcia_request_configuration pata_pcmcia: Unknown symbol pccard_get_tuple_data pata_pcmcia: Unknown symbol pcmcia_register_driver pata_pcmcia: Unknown symbol pccard_parse_tuple pata_pcmcia: Unknown symbol pccard_get_next_tuple pata_pcmcia: Unknown symbol pcmcia_request_irq ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 21 ahci 0000:00:1f.2: enabling ASUS P5W DH Deluxe on-board SIMG4726 workaround ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001043639] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata3: SATA max UDMA/133 abar m1024@0xfebff800 port 0xfebff900 irq 219 ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 219 ata5: SATA max UDMA/133 abar m1024@0xfebff800 port 0xfebffa00 irq 219 ata6: SATA max UDMA/133 abar m1024@0xfebff800 port 0xfebffa80 irq 219 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7 ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-6: Config Disk, RGL10364, max UDMA/133 ata4.00: 640 sectors, multi 1: LBA ata4.00: device is on DMA blacklist, disabling DMA ata4.00: configured for PIO4 ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7 ata5.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata5.00: configured for UDMA/133 ata6: SATA link down (SStatus 0 SControl 300) scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 2:0:0:0: [sda] Attached SCSI disk scsi 3:0:0:0: Direct-Access ATA Config Disk RGL1 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdb: unknown partition table sd 3:0:0:0: [sdb] Attached SCSI disk scsi 4:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 sd 4:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) sd 4:0:0:0: [sdc] Write Protect is off sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) sd 4:0:0:0: [sdc] Write Protect is off sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sdc3 sd 4:0:0:0: [sdc] Attached SCSI disk ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 18 ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part PCI: Setting latency timer of device 0000:02:00.0 to 64 scsi6 : ahci scsi7 : ahci ata7: SATA max UDMA/133 abar m8192@0xfa8fe000 port 0xfa8fe100 irq 18 ata8: SATA max UDMA/133 abar m8192@0xfa8fe000 port 0xfa8fe180 irq 18 ata7: SATA link down (SStatus 0 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.14) device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com md: raid10 personality registered for level 10 UDF-fs: No VRS found UDF-fs: No VRS found attempt to access beyond end of device sda4: rw=0, want=18, limit=2 ReiserFS: sda4: warning: sh-2006: read_super_block: bread failed (dev sda4, block 8, size 1024) attempt to access beyond end of device sda4: rw=0, want=130, limit=2 ReiserFS: sda4: warning: sh-2006: read_super_block: bread failed (dev sda4, block 64, size 1024) attempt to access beyond end of device sda4: rw=0, want=4, limit=2 EXT3-fs: unable to read superblock attempt to access beyond end of device sda4: rw=0, want=4, limit=2 EXT2-fs: unable to read superblock attempt to access beyond end of device sda4: rw=0, want=66, limit=2 isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32 attempt to access beyond end of device sda4: rw=0, want=68, limit=2 attempt to access beyond end of device sda4: rw=0, want=1252, limit=2 attempt to access beyond end of device sda4: rw=0, want=1028, limit=2 UDF-fs: No partition found (1) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen ata4.00: irq_stat 0x00400000, PHY RDY changed ata4: SError: { PHYRdyChg } ata4.00: cmd c4/00:02:4c:00:00/00:00:00:00:00/e0 tag 0 pio 1024 in res 50/00:00:01:01:80/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link down (SStatus 0 SControl 300) ata4: failed to recover some devices, retrying in 5 secs ata4: hard resetting link ata4: SATA link down (SStatus 0 SControl 300) ata4: failed to recover some devices, retrying in 5 secs ata4: hard resetting link ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: device is on DMA blacklist, disabling DMA ata4.00: configured for PIO4 ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata4: irq_stat 0x00000040, connection status changed ata4.00: device is on DMA blacklist, disabling DMA ata4.00: configured for PIO4 ata4: EH complete ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen ata4.00: irq_stat 0x00400000, PHY RDY changed ata4: SError: { PHYRdyChg } ata4.00: cmd c4/00:02:4c:00:00/00:00:00:00:00/e0 tag 0 pio 1024 in res 50/00:00:01:01:80/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link down (SStatus 0 SControl 300) ata4: failed to recover some devices, retrying in 5 secs ata4: hard resetting link ata4: SATA link down (SStatus 0 SControl 300) ata4: failed to recover some devices, retrying in 5 secs ata4: hard resetting link ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: device is on DMA blacklist, disabling DMA ata4.00: configured for PIO4 ata4: limiting SATA link speed to 1.5 Gbps ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xd t4 ata4: irq_stat 0x00000040, connection status changed ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: device is on DMA blacklist, disabling DMA ata4.00: configured for PIO4 ata4: EH complete ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen ata4.00: irq_stat 0x00400000, PHY RDY changed ata4: SError: { PHYRdyChg } ata4.00: cmd c4/00:02:4c:00:00/00:00:00:00:00/e0 tag 0 pio 1024 in res 50/00:00:01:01:80/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link down (SStatus 0 SControl 310) ata4: failed to recover some devices, retrying in 5 secs ata4: hard resetting link ata4: SATA link down (SStatus 0 SControl 310) ata4: failed to recover some devices, retrying in 5 secs ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: device is on DMA blacklist, disabling DMA ata4.00: configured for PIO4 ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata4: irq_stat 0x00000040, connection status changed ata4.00: device is on DMA blacklist, disabling DMA ata4.00: configured for PIO4 ata4: EH complete sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen ata4.00: irq_stat 0x00400000, PHY RDY changed ata4: SError: { PHYRdyChg } ata4.00: cmd c4/00:02:b0:00:00/00:00:00:00:00/e0 tag 0 pio 1024 in res 50/00:00:01:01:80/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link down (SStatus 0 SControl 310) ata4: failed to recover some devices, retrying in 5 secs ata4: hard resetting link ata4: SATA link down (SStatus 0 SControl 310) ata4: failed to recover some devices, retrying in 5 secs ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: device is on DMA blacklist, disabling DMA ata4.00: configured for PIO4 ata4.00: limiting speed to PIO3 ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xb t4 ata4: irq_stat 0x00000040, connection status changed ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: device is on DMA blacklist, disabling DMA ata4.00: configured for PIO3 ata4: EH complete sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen ata4.00: irq_stat 0x00400000, PHY RDY changed ata4: SError: { PHYRdyChg } ata4.00: cmd c4/00:02:d0:00:00/00:00:00:00:00/e0 tag 0 pio 1024 in res 50/00:00:01:01:80/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link down (SStatus 0 SControl 310) ata4: failed to recover some devices, retrying in 5 secs ata4: hard resetting link ata4: SATA link down (SStatus 0 SControl 310) ata4: failed to recover some devices, retrying in 5 secs ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: device is on DMA blacklist, disabling DMA ata4.00: configured for PIO3 ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata4: irq_stat 0x00000040, connection status changed ata4.00: device is on DMA blacklist, disabling DMA ata4.00: configured for PIO3 ata4: EH complete sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen ata4.00: irq_stat 0x00400000, PHY RDY changed ata4: SError: { PHYRdyChg } ata4.00: cmd c4/00:02:e0:00:00/00:00:00:00:00/e0 tag 0 pio 1024 in res 50/00:00:01:01:80/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link down (SStatus 0 SControl 310) ata4: failed to recover some devices, retrying in 5 secs ata4: hard resetting link ata4: SATA link down (SStatus 0 SControl 310) ata4: failed to recover some devices, retrying in 5 secs ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: device is on DMA blacklist, disabling DMA ata4.00: configured for PIO3 ata4.00: limiting speed to PIO0 ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xb t4 ata4: irq_stat 0x00000040, connection status changed ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: device is on DMA blacklist, disabling DMA ata4.00: configured for PIO0 ata4: EH complete sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA ata4.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen ata4.00: irq_stat 0x00400000, PHY RDY changed ata4: SError: { PHYRdyChg } ata4.00: cmd c4/00:02:f0:00:00/00:00:00:00:00/e0 tag 0 pio 1024 in res 50/00:00:01:01:80/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) ata4.00: status: { DRDY } ata4: hard resetting link ata4: SATA link down (SStatus 0 SControl 310) ata4: failed to recover some devices, retrying in 5 secs ata4: hard resetting link ata4: SATA link down (SStatus 0 SControl 310) ata4: failed to recover some devices, retrying in 5 secs ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: device is on DMA blacklist, disabling DMA ata4.00: configured for PIO0 ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata4: irq_stat 0x00000040, connection status changed ata4.00: device is on DMA blacklist, disabling DMA ata4.00: configured for PIO0 ata4: EH complete sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA attempt to access beyond end of device sdb: rw=0, want=1252, limit=640 attempt to access beyond end of device sdb: rw=0, want=1028, limit=640 UDF-fs: No partition found (1) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A