HPLIP doesn't seem to work as it should. hp-makeuri <ip> just returns an error and hp-setup <ip> causes hpssd.py to die consistently. Neither of these commands cause any network activity towards the printer (tracing with Ethereal reveals 0 packets transmitted/received). Transcript: ======================================= # /etc/init.d/hplip start # ps -e | grep hp 8771 ? 00:00:00 hpiod 8775 ? 00:00:00 hpssd.py # hp-makeuri -l debug 192.168.10.130 HP Linux Imaging and Printing System (ver. 1.6.6) Device URI Creation Utility ver. 4.2 Copyright (c) 2003-6 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. [DEBUG]: Trying IP address [DEBUG]: (xmit) Sending data on channel (3) [DEBUG]: 'msg=makeuri\nbus=net\nhostname=192.168.10.130\nport=1\n' [DEBUG]: (xmit) Reading data on channel (3) [DEBUG]: 'msg=MakeURIResult\nresult-code=12\n' [ERROR]: Device not found # hp-setup -l debug 192.168.10.130 HP Linux Imaging and Printing System (ver. 1.6.6) Printer/Fax Setup Utility ver. 2.0 Copyright (c) 2003-6 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. [DEBUG]: Trying IP address [DEBUG]: (xmit) Sending data on channel (3) [DEBUG]: 'msg=makeuri\nbus=net\nhostname=192.168.10.130\nport=1\n' [DEBUG]: (xmit) Reading data on channel (3) [DEBUG]: 'msg=MakeURIResult\nresult-code=12\n' [DEBUG]: (xmit) Sending data on channel (6) [DEBUG]: 'msg=probedevicesfiltered\nfilter=none\nbus=cups,par,usb\nformat=cups\ntimeout=5\nttl=4\n' [DEBUG]: *** glibc detected *** corrupted double-linked list: 0x080945c8 *** Aborted # ps -e | grep hp 8771 ? 00:00:00 hpiod ======================================= CPU and GCC version: ======================================= # uname -rmp 2.6.14 i686 Intel(R) Pentium(R) 4 CPU 2.60GHz # equery l gcc [ Searching for package 'gcc' in all categories among: ] * installed packages [I--] [ ] sys-devel/gcc-3.3.6 (3.3) [I--] [ -] sys-devel/gcc-3.4.6-r1 (3.4) [I--] [ ] sys-devel/gcc-config-1.3.13-r2 (0) [I--] [M~] x11-misc/gccmakedep-1.0.1-r1 (0) ======================================= My box is on the 192.168.1.x network, the printer is on 192.168.10.x. Network connectivity with the printer is fine. ======================================= # traceroute 192.168.10.130 traceroute to 192.168.10.130 (192.168.10.130), 30 hops max, 40 byte packets 1 my.firewall (192.168.1.1) 3.953 ms 3.943 ms 3.828 ms 2 192.168.10.130 (192.168.10.130) 4.542 ms 4.366 ms 4.281 ms # ping -c 1 192.168.10.130 PING 192.168.10.130 (192.168.10.130) 56(84) bytes of data. 64 bytes from 192.168.10.130: icmp_seq=1 ttl=254 time=4.07 ms --- 192.168.10.130 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 4.074/4.074/4.074/0.000 ms ======================================= I can control the printer using "konqueror http://192.168.10.130/", retrieve data using "snmpwalk -v 1 -c public 192.168.10.130" and chit chat with the device using "telnet 192.168.10.130 9100" with no problems. Do you want anything to do with this, or should I take it to hplip-help@lists.sourceforge.net?
(In reply to comment #0) > should I take it to hplip-help@lists.sourceforge.net? Frankly said, sounds like a good idea... :)
should be dealt with upstream, thanks.
