Summary: | xfree-4.3.0-r3 emerging fails | ||
---|---|---|---|
Product: | Gentoo Linux | Reporter: | ralf werner <ral_werner> |
Component: | New packages | Assignee: | Gentoo X packagers <x11> |
Status: | RESOLVED DUPLICATE | ||
Severity: | normal | CC: | ral_werner |
Priority: | High | ||
Version: | unspecified | ||
Hardware: | x86 | ||
OS: | Linux | ||
Whiteboard: | |||
Package list: | Runtime testing required: | --- |
Description
ralf werner
2003-06-17 09:19:58 UTC
you didn't run out of disk space did you? I have this problem too: -- schnipp -- make[4]: Leaving directory `/var/tmp/portage/xfree-4.3.0-r3/work/xc/programs/Xserver/hw/vfb' gcc -m32 -o XFree86 -mno-mmx -ansi -pedantic -Wno-return-type -w -L../../exports/lib xkb/xf86KillSrv.o xkb/xf86VT.o xkb/xf86Private.o ../../programs/Xserver/hw/xfree86/common/xf86Init.o ../../programs/Xserver/hw/xfree86/common/xf86IniExt.o ../../programs/Xserver/hw/xfree86/common/libxf86.a ../../programs/Xserver/hw/xfree86/parser/libxf86config.a ../../programs/Xserver/hw/xfree86/os-support/libxf86_os.a ../../programs/Xserver/hw/xfree86/loader/libloader.a ../../programs/Xserver/hw/xfree86/common/libxf86.a dix/libdix.a os/libos.a ../../exports/lib/libXdmcp.a ../../lib/font/fontbase.o ../../lib/font/libfontbase.a Xext/libexts.a xkb/libxkb.a Xi/libxinput.a lbx/liblbx.a ../../lib/lbxutil/liblbxutil.a ../../programs/Xserver/hw/xfree86/common/libxf86.a Xext/libexts.a xkb/libxkb.a Xi/libxinput.a lbx/liblbx.a ../../lib/lbxutil/liblbxutil.a randr/librandr.a render/librender.a dix/libxpstubs.a mi/libmi.a Xext/libexts.a xkb/libxkb.a Xi/libxinput.a lbx/liblbx.a ../../lib/lbxutil/liblbxutil.a randr/librandr.a render/librender.a ../../programs/Xserver/hw/xfree86/os-support/libxf86_os.a -lz -lm -lpam -lpam_misc -rdynamic -ldl -lXau -rdynamic -ldl -Wl,-rpath-link,../../exports/lib ../../programs/Xserver/hw/xfree86/loader/libloader.a(misym.o)(.data+0xbc): undefined reference to `miRegionEqual' collect2: ld returned 1 exit status make[3]: *** [XFree86] Error 1 make[3]: Leaving directory `/var/tmp/portage/xfree-4.3.0-r3/work/xc/programs/Xserver' make[2]: *** [install] Error 2 make[2]: Leaving directory `/var/tmp/portage/xfree-4.3.0-r3/work/xc/programs' make[1]: *** [install] Error 2 make[1]: Leaving directory `/var/tmp/portage/xfree-4.3.0-r3/work/xc' make: *** [install] Error 2 !!! ERROR: x11-base/xfree-4.3.0-r3 failed. !!! Function src_install, Line 541, Exitcode 2 !!! (no error message) bash-2.05b# -- schnapp -- -- schnipp -- src_install() { unset MAKE_OPTS einfo "Installing XFree86..." # gcc3 related fix. Do this during install, so that our # whole build will not be compiled without mmx instructions. if [ "`gcc-version`" != "2.95" ] && [ "${ARCH}" = "x86" ] then make install DESTDIR=${D} || \ make CDEBUGFLAGS="${CDEBUGFLAGS} -mno-mmx" \ CXXDEBUGFLAGS="${CXXDEBUGFLAGS} -mno-mmx" \ --> Zeile 541 <-- install DESTDIR=${D} || die else make install DESTDIR=${D} || die fi # We do not want these, so remove them ... rm -rf ${D}/usr/X11R6/include/fontconfig rm -f ${D}/usr/X11R6/lib/libfontconfig.* rm -f ${D}/usr/X11R6/bin/{fontconfig-config,fc-cache,fc-list} rm -f ${D}/usr/X11R6/man/man3/fontconfig.3x* rm -rf ${D}/etc/fonts/ -- schnapp -- [/etc/make.conf] # Copyright 2000-2003 Daniel Robbins, Gentoo Technologies, Inc. # Contains local system settings for Portage system # $Header: /home/cvsroot/gentoo-src/portage/cnf/make.conf,v 1.62 2003/05/29 08:34:55 carpaski Exp $ # Please review 'man make.conf' for more information. # Build-time functionality # ======================== # # The USE variable is used to enable optional build-time functionality. For # example, quite a few packages have optional X, gtk or GNOME functionality # that can only be enabled or disabled at compile-time. Gentoo Linux has a # very extensive set of USE variables described in our USE variable HOWTO at # http://www.gentoo.org/doc/use-howto.html # # The available list of use flags with descriptions is in your portage tree. # Use 'less' to view them: --> less /usr/portage/profiles/use.desc <-- # # 'ufed' is an ncurses/dialog interface available in portage to make handling # useflags for you. 'emerge app-admin/ufed' # # Example: USE="-3dnow -gdbm tcltk aalib lcms tiff alsa dvd ggi xmms flash encode mozilla mozirc moz acce ss-builtin mozctl mozxmlterm xml tetex perl acl samba doc sse" # Host Setting # ============ # # If you are using a Pentium Pro or greater processor, leave this line as-is; # otherwise, change to i586, i486 or i386 as appropriate. All modern systems # (even Athlons) should use "i686-pc-linux-gnu". All K6's are i586. # CHOST="i686-pc-linux-gnu" # Host and optimization settings # ============================== # # For optimal performance, enable a CFLAGS setting appropriate for your CPU. # # Please note that if you experience strange issues with a package, it may be # due to gcc's optimizations interacting in a strange way. Please test the # package (and in some cases the libraries it uses) at default optimizations # before reporting errors to developers. # # -mcpu=<cpu-type> means optimize code for the particular type of CPU without # breaking compatibility with other CPUs. # # -march=<cpu-type> means to take full advantage of the ABI and instructions # for the particular CPU; this will break compatibility with older CPUs (for # example, -march=athlon-xp code will not run on a regular Athlon, and # -march=i686 code will not run on a Pentium Classic. # # CPU types supported in gcc-3.2 and higher: athlon-xp, athlon-mp, # athlon-tbird, athlon, k6, k6-2, k6-3, i386, i486, i586 (Pentium), i686 # (PentiumPro), pentium, pentium-mmx, pentiumpro, pentium2 (Celeron), pentium3. # Note that Gentoo Linux 1.4 and higher include at least gcc-3.2. # # CPU types supported in gcc-2.95*: k6, i386, i486, i586 (Pentium), i686 # (Pentium Pro), pentium, pentiumpro Gentoo Linux 1.2 and below use gcc-2.95* # # CRITICAL WARNINGS: ****************************************************** # # ATHLON-4 will generate invalid SSE instructions; use 'athlon' instead. # # PENTIUM4 will generate invalid SSE2 instructions; use 'pentium3' instead. # # ************************************************************************* # # # Decent examples: # #CFLAGS="-mcpu=athlon-xp -O3 -pipe" CFLAGS="-march=pentium3 -O3 -pipe" # If you set a CFLAGS above, then this line will set your default C++ flags to # the same settings. CXXFLAGS="${CFLAGS}" # Advanced Masking # ================ # # Gentoo is using a new masking system to allow for easier stability testing # on packages. KEYWORDS are used in ebuilds to mask and unmask packages based # on the platform they are set for. A special form has been added that # indicates packages and revisions that are expected to work, but have not yet # been approved for the stable set. '~arch' is a superset of 'arch' which # includes the unstable, in testing, packages. Users of the 'x86' architecture # would add '~x86' to ACCEPT_KEYWORDS to enable unstable/testing packages. # '~ppc', '~sparc', '~sparc64' are the unstable KEYWORDS for their respective # platforms. DO NOT PUT ANYTHING BUT YOUR SPECIFIC ~ARCHITECTURE IN THE LIST. # IF YOU ARE UNSURE OF YOUR ARCH, OR THE IMPLICATIONS, DO NOT MODIFY THIS. # ACCEPT_KEYWORDS="~x86" # Portage Directories # =================== # # Each of these settings controls an aspect of portage's storage and file # system usage. If you change any of these, be sure it is available when # you try to use portage. *** DO NOT INCLUDE A TRAILING "/" *** # # PORTAGE_TMPDIR is the location portage will use for compilations and # temporary storage of data. This can get VERY large depending upon # the application being installed. PORTAGE_TMPDIR=/var/tmp # # PORTDIR is the location of the portage tree. This is the repository # for all profile information as well as all ebuilds. This directory # itself can reach 200M. WE DO NOT RECOMMEND that you change this. #PORTDIR=/usr/portage # # DISTDIR is where all of the source code tarballs will be placed for # emerges. The source code is maintained here unless you delete # it. The entire repository of tarballs for gentoo is 9G. This is # considerably more than any user will ever download. 2-3G is # a large DISTDIR. #DISTDIR=${PORTDIR}/distfiles # # PKGDIR is the location of binary packages that you can have created # with '--buildpkg' or '-b' while emerging a package. This can get # upto several hundred megs, or even a few gigs. #PKGDIR=${PORTDIR}/packages # # PORT_LOGDIR is the location where portage will store all the logs it # creates from each individual merge. They are stored as YYMMDD-$PF.log # in the directory specified. This is disabled until you enable it by # providing a directory. Permissions will be modified as needed IF the # directory exists, otherwise logging will be disabled. PORT_LOGDIR=/var/log/portage # # PORTDIR_OVERLAY is a directory where local ebuilds may be stored without # concern that they will be deleted by rsync updates. Default is not # defined. #PORTDIR_OVERLAY=/usr/local/portage # Fetching files # ============== # # If you need to set a proxy for wget or lukemftp, add the appropriate "export # ftp_proxy=<proxy>" and "export http_proxy=<proxy>" lines to /etc/profile if # all users on your system should use them. # # Portage uses wget by default. Here are some settings for some alternate # downloaders -- note that you need to merge these programs first before they # will be available. # # Default fetch command (5 tries, passive ftp for firewall compatibility) #FETCHCOMMAND="/usr/bin/wget -t 5 --passive-ftp \${URI} -P \${DISTDIR}" #RESUMECOMMAND="/usr/bin/wget -c -t 5 --passive-ftp \${URI} -P \${DISTDIR}" # # Using wget, ratelimiting downloads #FETCHCOMMAND="/usr/bin/wget -t 5 --passive-ftp --limit-rate=200k \${URI} -P \${DISTDIR}" #RESUMECOMMAND="/usr/bin/wget -c -t 5 --passive-ftp --limit-rate=200k \${URI} -P \${DISTDIR}" # # Lukemftp (BSD ftp): #FETCHCOMMAND="/usr/bin/lukemftp -s -a -o \${DISTDIR}/\${FILE} \${URI}" #RESUMECOMMAND="/usr/bin/lukemftp -s -a -R -o \${DISTDIR}/\${FILE} \${URI}" # # Prozilla (turbo downloader) #FETCHCOMMAND='/usr/bin/proz --no-getch -s ${URI} -P ${DISTDIR}' # # Portage uses GENTOO_MIRRORS to specify mirrors to use for source retrieval. # The list is a space seperated list which is read left to right. If you use # another mirror we highly recommend leaving the default mirror at the end of # the list so that portage will fall back to it if the files cannot be found # on your specified mirror. We _HIGHLY_ recommend that you change this setting # to a nearby mirror by merging and using the 'mirrorselect' tool. GENTOO_MIRRORS="ftp://ftp.belnet.be/mirror/rsync.gentoo.org/gentoo/ http://gentoo.oregonstate.edu http://www.ibiblio.org/pub/Linux/distributions/gentoo" # Synchronizing Portage # ===================== # # Each of these settings effects how Gentoo synchronizes your Portage tree. # Synchronization is handled by rsync and these settings allow some control # over how it is done. # # # SYNC is the server used by rsync to retrieve a localized rsync mirror # rotation. This allows you to select servers that are geographically # close to you, yet still distribute the load over a number of servers. # Please do not single out specific rsync mirrors. Doing so places undue # stress on particular mirrors. Instead you may use one of the following # continent specific rotations: # # Default: "rsync://rsync.gentoo.org/gentoo-portage" # North America: "rsync://rsync.namerica.gentoo.org/gentoo-portage" # South America: "rsync://rsync.samerica.gentoo.org/gentoo-portage" # Europe: "rsync://rsync.europe.gentoo.org/gentoo-portage" # Asia: "rsync://rsync.asia.gentoo.org/gentoo-portage" # Australia: "rsync://rsync.au.gentoo.org/gentoo-portage" #SYNC="rsync://rsync.gentoo.org/gentoo-portage" # # RSYNC_RETRIES sets the number of times portage will attempt to retrieve # a current portage tree before it exits with an error. This allows # for a more successful retrieval without user intervention most times. #RSYNC_RETRIES="3" # # RSYNC_TIMEOUT sets the length of time rsync will wait before it times out # on a connection. Most users will benefit from this setting as it will # reduce the amount of 'dead air' they experience when they run across # the occasional, unreachable mirror. Dialup users might want to set this # value up around the 300 second mark. #RSYNC_TIMEOUT=180 # Advanced Features # ================= # # MAKEOPTS provides extra options that may be passed to 'make' when a # program is compiled. Presently the only use is for specifying # the number of parallel makes (-j) to perform. The suggested number # for parallel makes is CPUs+1. #MAKEOPTS="-j2" # # PORTAGE_NICENESS provides a default increment to emerge's niceness level. # Note: This is an increment. Running emerge in a niced environment will # reduce it further. Default is unset. #PORTAGE_NICENESS=3 # # AUTOCLEAN enables portage to automatically clean out older or overlapping # packages from the system after every successful merge. This is the # same as running 'emerge -c' after every merge. Set with: "yes" or "no". # This does not affect the unpacked source. See 'noclean' below. #AUTOCLEAN="yes" # # FEATURES are settings that affect the functionality of portage. Most of # these settings are for developer use, but some are available to non- # developers as well. # # 'buildpkg' causes binary packages to be created of all packages that # are merged. # 'ccache' enables ccache support via CC. # 'cvs' feature for developers that causes portage to enable full # settings and USE flags in SRC_URI and has wide effects -- # don't set this unless you're ready for it. # 'digest' autogenerate a digest for packages. # 'distcc' enables distcc support via CC. # 'fixpackages' allows portage to fix binary packages that are stored in # PKGDIR. This can consume a lot of time. 'fixpackages' is # also a script that can be run at any given time to force # the same actions. # 'keeptemp' prevents the clean phase from deleting the temp files ($T) # from a merge. # 'keepwork' prevents the clean phase from deleting the WORKDIR. # 'noauto' causes ebuild to perform only the action requested and # not any other required actions like clean or # 'noclean' prevents portage from removing the source and temporary files # after a merge -- for debugging purposes only. # 'nostrip' prevents stripping of binaries. # 'notitles' disables xterm titlebar updates (which contain status info). # 'sandbox' enable sandbox-ing when running emerge and ebuild # 'strict' causes portage to react strongly to conditions that # have the potential to be dangerous -- like missing or # incorrect Manifest files. # 'userpriv' allows portage to drop root privleges while it is compiling # as a security measure, and as a side effect this can remove # sandbox access violations for users. # 'usersandbox' enables sandboxing while portage is running under userpriv. # unpack -- for debugging purposes only. FEATURES="sandbox buildpkg distcc userpriv usersandbox notitles noclean noauto cvs keeptemp keepwork" # # CCACHE_SIZE sets the space use limitations for ccache. The default size is # 2G, and will be set if not defined otherwise and ccache is in features. # Portage will set the default ccache dir if it is not present in the # user's environment: ${PORTAGE_TMPDIR}/ccache (/var/tmp/ccache). # Sizes are specified with 'G' 'M' or 'K'. # '4G' for 4 gigabytes, '4096M' for 4 gigabytes, etc... Default is 2G #CCACHE_SIZE="2G" # # RSYNC_EXCLUDEFROM is a file that portage will pass to rsync when it updates # the portage tree. Specific chucks of the tree may be excluded from # consideration. This may cause dependency failures if you are not careful. # The file format is one pattern per line, blanks and ';' or '#' lines are # comments. See 'man rsync' for more details on the exclude-from format. #RSYNC_EXCLUDEFROM=/etc/portage/rsync_excludes please rsync and emerge, the issue should be solved. Oliver I was referring to you before Ralf looks like you don't have enough space please free some more. Is anything on this bug still unresolved? If not, I'm going to close it. Ralf, Oliver? I tried it again with more diskspace (around 1GB) befor compiling this package. The error still remains. I'am dont know exactly at the same place, but still in the Mesa directory. I found the following workaround for me. I edited the ebuild so that it only make the installation for me. Then i am configured Xfree without Mesa and compiled it from hand. I think this is ok for me ( old hardware). I become later more problems with other packages. Mostly segmentation faults. I saw this error have other users to. I read the bugreports and found that the hardware is the canditat for this errors. I tried to track down this ( memorytest, the cpu whas never overclocked) but i found no solution. The other canditat are aggressive optimizations for compiling, but i have the basesystem installed. So this in my opinion is not the error. But i am tried to install gentoo from stage 1. The errors came now so early that i have no chance to install from this stage! I am will thank you all for your work on my problem. PS.: This Computer is a playground for me ( hobby). The hardware is old but still use full for me. Maybe an MP3 Jukebox or so. I switch on this computer to another distro, so i dont waste your time. Again really great thanks. I still like Gentoo. Ralf |