full dmesg

dmesg.error (text/plain), 39.15 KB, created by Francisco Lloret on 2010-07-12 19:39:23 UTC

Linux version 2.6.34-gentoo-r1 (root@Core2Duo) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP PREEMPT Mon Jul 12 19:39:45 CEST 2010
Command line: root=/dev/sda6 video=uvesafb:1440x900-32,mtrr:3,ywrap splash=silent,theme:natural_gentoo quiet console=tty1 BOOT_MSG="Iniciando el kernel..."
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
 BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
 BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
 BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
 BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7ff80 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-DFFFF write-protect
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
init_memory_mapping: 0000000000000000-000000007ff80000
 0000000000 - 007fe00000 page 2M
 007fe00000 - 007ff80000 page 4k
kernel direct mapping tables up to 7ff80000 @ 16000-1a000
ACPI: RSDP 00000000000fbdd0 00024 (v02 ACPIAM)
ACPI: XSDT 000000007ff80100 00054 (v01 A_M_I_ OEMXSDT  07000807 MSFT 00000097)
ACPI: FACP 000000007ff80290 000F4 (v03 A_M_I_ OEMFACP  07000807 MSFT 00000097)
ACPI: DSDT 000000007ff805c0 07EB9 (v01  A0807 A0807000 00000000 INTL 20060113)
ACPI: FACS 000000007ff8e000 00040
ACPI: APIC 000000007ff80390 0006C (v01 A_M_I_ OEMAPIC  07000807 MSFT 00000097)
ACPI: MCFG 000000007ff80400 0003C (v01 A_M_I_ OEMMCFG  07000807 MSFT 00000097)
ACPI: OEMB 000000007ff8e040 00081 (v01 A_M_I_ AMI_OEM  07000807 MSFT 00000097)
ACPI: HPET 000000007ff88480 00038 (v01 A_M_I_ OEMHPET  07000807 MSFT 00000097)
ACPI: OSFR 000000007ff884c0 000B0 (v01 A_M_I_ OEMOSFR  07000807 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x0007ff80
On node 0 totalpages: 524045
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3925 pages, LIFO batch:0
  DMA32 zone: 7111 pages used for memmap
  DMA32 zone: 512953 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
early_res array is doubled to 64 at [18000 - 187ff]
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff880001800000 s79464 r8192 d22936 u524288
pcpu-alloc: s79464 r8192 d22936 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 516878
Kernel command line: root=/dev/sda6 video=uvesafb:1440x900-32,mtrr:3,ywrap splash=silent,theme:natural_gentoo quiet console=tty1 BOOT_MSG="Iniciando el kernel..."
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
No AGP bridge found
Subtract (48 early reservations)
  #1 [0001000000 - 000179f174]   TEXT DATA BSS
  #2 [00017a0000 - 00017a0278]             BRK
  #3 [00000ff790 - 0000100000]   BIOS reserved
  #4 [00000ff780 - 00000ff790]    MP-table mpf
  #5 [000009dc00 - 00000f1530]   BIOS reserved
  #6 [00000f16a4 - 00000ff780]   BIOS reserved
  #7 [00000f1530 - 00000f16a4]    MP-table mpc
  #8 [0000010000 - 0000012000]      TRAMPOLINE
  #9 [0000012000 - 0000016000]     ACPI WAKEUP
  #10 [0000016000 - 0000018000]         PGTABLE
  #11 [00017a0280 - 00017a1280]         BOOTMEM
  #12 [000179f180 - 000179f300]         BOOTMEM
  #13 [0001fa2000 - 0001fa3000]         BOOTMEM
  #14 [0001fa3000 - 0001fa4000]         BOOTMEM
  #15 [0002000000 - 0003c00000]        MEMMAP 0
  #16 [000179f300 - 000179f480]         BOOTMEM
  #17 [00017a1280 - 00017ad280]         BOOTMEM
  #18 [00017ae000 - 00017af000]         BOOTMEM
  #19 [000179f480 - 000179f4c1]         BOOTMEM
  #20 [000179f500 - 000179f543]         BOOTMEM
  #21 [000179f580 - 000179f7b0]         BOOTMEM
  #22 [000179f7c0 - 000179f828]         BOOTMEM
  #23 [000179f840 - 000179f8a8]         BOOTMEM
  #24 [000179f8c0 - 000179f928]         BOOTMEM
  #25 [000179f940 - 000179f9a8]         BOOTMEM
  #26 [000179f9c0 - 000179fa28]         BOOTMEM
  #27 [000179fa40 - 000179faa8]         BOOTMEM
  #28 [000179fac0 - 000179fb28]         BOOTMEM
  #29 [000179fb40 - 000179fba8]         BOOTMEM
  #30 [000179fbc0 - 000179fc28]         BOOTMEM
  #31 [000179fc40 - 000179fc60]         BOOTMEM
  #32 [000179fc80 - 000179fd0e]         BOOTMEM
  #33 [000179fd40 - 000179fdce]         BOOTMEM
  #34 [0001800000 - 000181b000]         BOOTMEM
  #35 [0001880000 - 000189b000]         BOOTMEM
  #36 [0001900000 - 000191b000]         BOOTMEM
  #37 [0001980000 - 000199b000]         BOOTMEM
  #38 [000179fe00 - 000179fe08]         BOOTMEM
  #39 [000179fe40 - 000179fe48]         BOOTMEM
  #40 [000179fe80 - 000179fe90]         BOOTMEM
  #41 [000179fec0 - 000179fee0]         BOOTMEM
  #42 [00017ad280 - 00017ad3b0]         BOOTMEM
  #43 [000179ff00 - 000179ff50]         BOOTMEM
  #44 [000179ff80 - 000179ffd0]         BOOTMEM
  #45 [00017af000 - 00017b7000]         BOOTMEM
  #46 [000199b000 - 0001b9b000]         BOOTMEM
  #47 [0001b9b000 - 0001c9b000]         BOOTMEM
Memory: 2056064k/2096640k available (4069k kernel code, 460k absent, 40116k reserved, 2388k data, 496k init)
Hierarchical RCU implementation.
NR_IRQS:384
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty1] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2333.256 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4668.95 BogoMIPS (lpj=7777520)
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20100121
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz stepping 0b
Booting Node   0, Processors  #1
Brought up 2 CPUs
Total of 2 processors activated (9331.91 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000007ff8e0d0 001D2 (v01    AMI   CPU1PM 00000001 INTL 20060113)
ACPI: SSDT 000000007ff8e2b0 00143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io  0xb800-0xb81f]
pci 0000:00:1a.1: reg 20: [io  0xb880-0xb89f]
pci 0000:00:1a.2: reg 20: [io  0xbc00-0xbc1f]
pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0xb080-0xb09f]
pci 0000:00:1d.1: reg 20: [io  0xb400-0xb41f]
pci 0000:00:1d.2: reg 20: [io  0xb480-0xb49f]
pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: reg 10: [io  0xa000-0xa007]
pci 0000:00:1f.2: reg 14: [io  0x9c00-0x9c03]
pci 0000:00:1f.2: reg 18: [io  0x9880-0x9887]
pci 0000:00:1f.2: reg 1c: [io  0x9800-0x9803]
pci 0000:00:1f.2: reg 20: [io  0x9480-0x948f]
pci 0000:00:1f.2: reg 24: [io  0x9400-0x940f]
pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
pci 0000:00:1f.5: reg 10: [io  0xb000-0xb007]
pci 0000:00:1f.5: reg 14: [io  0xac00-0xac03]
pci 0000:00:1f.5: reg 18: [io  0xa880-0xa887]
pci 0000:00:1f.5: reg 1c: [io  0xa800-0xa803]
pci 0000:00:1f.5: reg 20: [io  0xa480-0xa48f]
pci 0000:00:1f.5: reg 24: [io  0xa400-0xa40f]
pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
pci 0000:01:00.0: reg 24: [io  0xcc00-0xcc7f]
pci 0000:01:00.0: reg 30: [mem 0xfe8e0000-0xfe8fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfe8fffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
pci 0000:03:00.0: reg 10: [io  0xdc00-0xdc07]
pci 0000:03:00.0: reg 14: [io  0xd880-0xd883]
pci 0000:03:00.0: reg 18: [io  0xd800-0xd807]
pci 0000:03:00.0: reg 1c: [io  0xd480-0xd483]
pci 0000:03:00.0: reg 20: [io  0xd400-0xd40f]
pci 0000:03:00.0: reg 24: [mem 0xfeaffc00-0xfeafffff]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [mem 0xfe9c0000-0xfe9fffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0xfe9a0000-0xfe9bffff pref]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 02-02]
pci 0000:00:1c.5:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: reg 10: [io  0xe800-0xe8ff]
pci 0000:05:00.0: reg 14: [mem 0xfebffc00-0xfebffcff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:01.0: reg 10: [mem 0xfebff000-0xfebff7ff]
pci 0000:05:01.0: reg 14: [io  0xec00-0xec7f]
pci 0000:05:01.0: supports D2
pci 0000:05:01.0: PME# supported from D2 D3hot D3cold
pci 0000:05:01.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009dc00 - 000000000009ffff 
reserve RAM buffer: 000000007ff80000 - 000000007fffffff 
Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:07: [io  0x0290-0x0297] has been reserved
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x0800-0x087f] has been reserved
system 00:08: [io  0x0480-0x04bf] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
system 00:08: [mem 0xffa00000-0xffafffff] has been reserved
system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:08: [mem 0xffe00000-0xffefffff] has been reserved
system 00:08: [mem 0xfff00000-0xfffffffe] has been reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0x7fffffff] could not be reserved
pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x803fffff]
pci 0000:00:1c.4: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:1c.5: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.5: BAR 7: assigned [io  0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfe8fffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x803fffff]
pci 0000:00:1c.0:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.4:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 02-02]
pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.5:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: enabling device (0106 -> 0107)
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe8fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0x80000000-0x803fffff]
pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0x80000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
HugeTLB registered 2 MB page size, pre-allocated 0 pages
Installing knfsd (copyright (C) 1996 [e-mail]).
Slow work thread pool: Starting up
Slow work thread pool: Ready
NTFS driver 2.1.29 [Flags: R/O].
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 4015
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
Linux agpgart interface v0.103
uvesafb: NVIDIA Corporation, G86 Board - p403h24 , Chip Rev   , OEM: NVIDIA, VBE v3.0
uvesafb: VBIOS/hardware supports DDC2 transfers
uvesafb: monitor limits: vf = 75 Hz, hf = 83 kHz, clk = 140 MHz
uvesafb: scrolling: redraw
Console: switching to colour frame buffer device 180x56
uvesafb: framebuffer at 0xfb000000, mapped to 0xffffc90010100000, using 10125k, total 14336k
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
ahci 0000:03:00.0: version 3.0
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
Fusion MPT base driver 3.04.14
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.14
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: using NMI interrupt.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: HPA detected: current 488395055, native 488397168
ata1.00: ATA-7: ST3250310AS, 3.AAC, max UDMA/133
ata1.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST3250310AS      3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488395055 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
REISERFS (device sda6): found reiserfs format "3.6" with standard journal
REISERFS (device sda6): using ordered data mode
REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda6): checking transaction log (sda6)
REISERFS (device sda6): Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly on device 8:6.
Freeing unused kernel memory: 496k freed
udev: starting version 149
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
ohci1394 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io  0x0400-0x041f] conflicts with ACPI region SMRG [dma 1024-1039 pref window disabled]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17]  MMIO=[febff000-febff7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
input: PC Speaker as /devices/platform/pcspkr/input/input3
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
8139too 0000:05:00.0: eth0: RealTek RTL8139 at 0xffffc90010c2cc00, 00:13:49:0a:77:dd, IRQ 16
atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
atl1 0000:02:00.0: setting latency timer to 64
atl1 0000:02:00.0: version 2.1.3
udev: renamed network interface eth0 to eth1
pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_marvell 0000:03:00.0: setting latency timer to 64
scsi4 : pata_marvell
scsi5 : pata_marvell
ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
ata6: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
usb 8-4: new high speed USB device using ehci_hcd and address 2
usb 8-6: new high speed USB device using ehci_hcd and address 3
ata5.01: ATAPI: DVD-ROM DDU1621, VER S3.5, max UDMA/33
ata5.01: configured for UDMA/33
scsi 4:0:1:0: CD-ROM            SONY     DVD-ROM DDU1621  S3.5 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 39x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:1:0: Attached scsi CD-ROM sr0
sr 4:0:1:0: Attached scsi generic sg1 type 5
Initializing USB Mass Storage driver...
scsi6 : usb-storage 8-4:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
usb 3-2: new low speed USB device using uhci_hcd and address 2
input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1a.2/usb3/3-2/3-2:1.0/input/input4
generic-usb 0003:046D:C00C.0001: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1a.2-2/input0
ATK0110 ATK0110:00: adding...
ATK0110 ATK0110:00: board ID = P5K-SE
ATK0110 ATK0110:00: Using old hwmon interface
ATK0110 ATK0110:00: voltage: 0x6020000 Vcore Voltage [850-1600] enabled
ATK0110 ATK0110:00: voltage: 0x6020001  +3.3 Voltage [2970-3630] enabled
ATK0110 ATK0110:00: voltage: 0x6020002  +5 Voltage [4500-5500] enabled
ATK0110 ATK0110:00: voltage: 0x6020003  +12 Voltage [10200-13800] enabled
ATK0110 ATK0110:00: temperature: 0x6030000 CPU Temperature [600-950] enabled
ATK0110 ATK0110:00: temperature: 0x6030001 MB Temperature [450-950] enabled
ATK0110 ATK0110:00: fan: 0x6040000 CPU FAN Speed [600-7200] enabled
ATK0110 ATK0110:00: fan: 0x6040001 CHASSIS FAN Speed [600-7200] enabled
ATK0110 ATK0110:00: fan: 0x6040002 POWER FAN Speed [600-7200] enabled
ATK0110 ATK0110:00: registering hwmon device
ATK0110 ATK0110:00: populating sysfs directory
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001106000000494f]
dib0700: loaded with support for 14 different device-types
dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-T Stick)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC883: BIOS auto-probing.
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  195.36.24  Thu Apr 22 19:10:14 PDT 2010
DVB: registering adapter 0 frontend 0 (DiBcom 7000MA/MB/PA/PB/MC)...
MT2060: successfully identified (IF1 = 1254)
scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9732 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
scsi 6:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9732 PQ: 0 ANSI: 0
sd 6:0:0:1: Attached scsi generic sg3 type 0
scsi 6:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9732 PQ: 0 ANSI: 0
sd 6:0:0:2: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
scsi 6:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9732 PQ: 0 ANSI: 0
sd 6:0:0:3: Attached scsi generic sg5 type 0
sd 6:0:0:1: [sdc] Attached SCSI removable disk
scsi 6:0:0:4: Direct-Access     Generic  STORAGE DEVICE   9732 PQ: 0 ANSI: 0
sd 6:0:0:4: Attached scsi generic sg6 type 0
sd 6:0:0:3: [sde] Attached SCSI removable disk
sd 6:0:0:4: [sdf] Attached SCSI removable disk
sd 6:0:0:2: [sdd] Attached SCSI removable disk
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb8/8-6/input/input5
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
dib0700: rc submit urb failed

usbcore: registered new interface driver dvb_usb_dib0700
REISERFS (device sda7): found reiserfs format "3.6" with standard journal
REISERFS (device sda7): using ordered data mode
REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sda7): checking transaction log (sda7)
REISERFS (device sda7): Using r5 hash to sort names
Adding 4104572k swap on /dev/sda5.  Priority:-1 extents:1 across:4104572k 
fbcondecor: console 0 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 0
fbcondecor: console 1 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 1
fbcondecor: console 2 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 2
fbcondecor: console 3 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 3
fbcondecor: console 4 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 4
fbcondecor: console 5 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 5
fbcondecor: console 6 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 6
fbcondecor: console 7 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 7
fbcondecor: console 8 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 8
fbcondecor: console 9 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 9
fbcondecor: console 10 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 10
fbcondecor: console 11 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 11
atl1 0000:02:00.0: irq 29 for MSI/MSI-X
atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
eth0: no IPv6 routers present
svc: failed to register lockdv1 RPC service (errno 97).
fbcondecor: console 6 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 6
BUG: unable to handle kernel NULL pointer dereference at 0000000000000012
IP: [<ffffffffa00204a9>] i2c_transfer+0x1c/0xd0 [i2c_core]
PGD 7c2f4067 PUD 7c304067 PMD 0 
Oops: 0000 [#1] PREEMPT SMP 
last sysfs file: /sys/devices/platform/coretemp.1/temp1_input
CPU 1 
Modules linked in: coretemp snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_hda_codec_realtek snd_hda_intel snd_hda_codec dvb_usb_dib0700 dib7000p dib7000m dib0070 dvb_usb dib8000 mt2266 tuner_xc2028 dib3000mc snd_pcm dibx000_common mxl5007t snd_timer xc5000 s5h1411 mt2060 lgdt3305 dvb_core asus_atk0110 nvidia(P) usb_storage snd hwmon pata_marvell atl1 8139too mii pcspkr i2c_i801 ohci1394 i2c_core ehci_hcd snd_page_alloc uhci_hcd

Pid: 7738, comm: kaffeine Tainted: P           2.6.34-gentoo-r1 #1 P5K SE/P5K SE
RIP: 0010:[<ffffffffa00204a9>]  [<ffffffffa00204a9>] i2c_transfer+0x1c/0xd0 [i2c_core]
RSP: 0018:ffff88007eb33ba8  EFLAGS: 00010292
RAX: ffff88007eb33c08 RBX: 0000000000000002 RCX: 0000000000000000
RDX: 0000000000000002 RSI: ffff88007eb33be8 RDI: 0000000000000002
RBP: 00000000ffffffa1 R08: 0000000050000d80 R09: 0000000000000000
R10: ffffe8ffffffffff R11: ffffffff00000080 R12: ffff88007bedb800
R13: 0000000000000001 R14: 0000000000000002 R15: ffff88007eb33be8
FS:  00007f31d179d760(0000) GS:ffff880001880000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000012 CR3: 000000007c219000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process kaffeine (pid: 7738, threadinfo ffff88007eb32000, task ffff88007ef44700)
Stack:
 ffff88007c32e4d8 00000000000000eb 0000000000000001 ffff88007bedb800
<0> 0000000000000001 ffffc90011c06000 ffff88007ba83038 ffffffffa0ca9109
<0> 000000020000000c ffff88007eb33c18 000000020001000c ffff88007eb33c08
Call Trace:
 [<ffffffffa0ca9109>] ? dib7000p_read_word+0x6e/0xbe [dib7000p]
 [<ffffffffa0c91ae4>] ? usb_urb_submit+0x26/0x6a [dvb_usb]
 [<ffffffffa0ca9e9a>] ? dib7000p_pid_filter_ctrl+0x1e/0x74 [dib7000p]
 [<ffffffffa0c91100>] ? dvb_usb_ctrl_feed+0xcc/0x114 [dvb_usb]
 [<ffffffffa0bfb7d5>] ? dmx_ts_feed_start_filtering+0x72/0xbe [dvb_core]
 [<ffffffffa0bf8af2>] ? dvb_dmxdev_start_feed+0xbe/0xe6 [dvb_core]
 [<ffffffffa0bf9bfb>] ? dvb_dmxdev_filter_start+0x2aa/0x314 [dvb_core]
 [<ffffffffa0bf9f09>] ? dvb_dmxdev_add_pid+0x5e/0x129 [dvb_core]
 [<ffffffffa0bfa2d0>] ? dvb_demux_do_ioctl+0x2fc/0x547 [dvb_core]
 [<ffffffffa0bf8469>] ? dvb_usercopy+0xb4/0x10f [dvb_core]
 [<ffffffffa0bf9fd4>] ? dvb_demux_do_ioctl+0x0/0x547 [dvb_core]
 [<ffffffff810bec0e>] ? vfs_ioctl+0x69/0x92
 [<ffffffff810bf0c9>] ? do_vfs_ioctl+0x41c/0x454
 [<ffffffff810b35c7>] ? fget_light+0xb7/0xe4
 [<ffffffff810bf13e>] ? sys_ioctl+0x3d/0x5c
 [<ffffffff81001f6b>] ? system_call_fastpath+0x16/0x1b
Code: c2 28 01 02 a0 e8 8f 44 26 e1 48 83 c4 18 c3 41 57 49 89 f7 41 56 41 89 d6 41 55 41 54 55 bd a1 ff ff ff 53 48 89 fb 48 83 ec 08 <48> 8b 47 10 48 83 38 00 0f 84 97 00 00 00 65 48 8b 04 25 48 b5 
RIP  [<ffffffffa00204a9>] i2c_transfer+0x1c/0xd0 [i2c_core]
 RSP <ffff88007eb33ba8>
CR2: 0000000000000012
---[ end trace 72adf8ba70a60d92 ]---