Linux version 2.6.34-gentoo-r1 (root@Core2Duo) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP PREEMPT Mon Jul 12 19:39:45 CEST 2010 Command line: root=/dev/sda6 video=uvesafb:1440x900-32,mtrr:3,ywrap splash=silent,theme:natural_gentoo quiet console=tty1 BOOT_MSG="Iniciando el kernel..." BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff80000 (usable) BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data) BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS) BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI 2.4 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x7ff80 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-DFFFF write-protect E0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000ff780] ff780 init_memory_mapping: 0000000000000000-000000007ff80000 0000000000 - 007fe00000 page 2M 007fe00000 - 007ff80000 page 4k kernel direct mapping tables up to 7ff80000 @ 16000-1a000 ACPI: RSDP 00000000000fbdd0 00024 (v02 ACPIAM) ACPI: XSDT 000000007ff80100 00054 (v01 A_M_I_ OEMXSDT 07000807 MSFT 00000097) ACPI: FACP 000000007ff80290 000F4 (v03 A_M_I_ OEMFACP 07000807 MSFT 00000097) ACPI: DSDT 000000007ff805c0 07EB9 (v01 A0807 A0807000 00000000 INTL 20060113) ACPI: FACS 000000007ff8e000 00040 ACPI: APIC 000000007ff80390 0006C (v01 A_M_I_ OEMAPIC 07000807 MSFT 00000097) ACPI: MCFG 000000007ff80400 0003C (v01 A_M_I_ OEMMCFG 07000807 MSFT 00000097) ACPI: OEMB 000000007ff8e040 00081 (v01 A_M_I_ AMI_OEM 07000807 MSFT 00000097) ACPI: HPET 000000007ff88480 00038 (v01 A_M_I_ OEMHPET 07000807 MSFT 00000097) ACPI: OSFR 000000007ff884c0 000B0 (v01 A_M_I_ OEMOSFR 07000807 MSFT 00000097) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009d 0: 0x00000100 -> 0x0007ff80 On node 0 totalpages: 524045 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3925 pages, LIFO batch:0 DMA32 zone: 7111 pages used for memmap DMA32 zone: 512953 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a301 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 early_res array is doubled to 64 at [18000 - 187ff] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000) setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff880001800000 s79464 r8192 d22936 u524288 pcpu-alloc: s79464 r8192 d22936 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516878 Kernel command line: root=/dev/sda6 video=uvesafb:1440x900-32,mtrr:3,ywrap splash=silent,theme:natural_gentoo quiet console=tty1 BOOT_MSG="Iniciando el kernel..." PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found Subtract (48 early reservations) #1 [0001000000 - 000179f174] TEXT DATA BSS #2 [00017a0000 - 00017a0278] BRK #3 [00000ff790 - 0000100000] BIOS reserved #4 [00000ff780 - 00000ff790] MP-table mpf #5 [000009dc00 - 00000f1530] BIOS reserved #6 [00000f16a4 - 00000ff780] BIOS reserved #7 [00000f1530 - 00000f16a4] MP-table mpc #8 [0000010000 - 0000012000] TRAMPOLINE #9 [0000012000 - 0000016000] ACPI WAKEUP #10 [0000016000 - 0000018000] PGTABLE #11 [00017a0280 - 00017a1280] BOOTMEM #12 [000179f180 - 000179f300] BOOTMEM #13 [0001fa2000 - 0001fa3000] BOOTMEM #14 [0001fa3000 - 0001fa4000] BOOTMEM #15 [0002000000 - 0003c00000] MEMMAP 0 #16 [000179f300 - 000179f480] BOOTMEM #17 [00017a1280 - 00017ad280] BOOTMEM #18 [00017ae000 - 00017af000] BOOTMEM #19 [000179f480 - 000179f4c1] BOOTMEM #20 [000179f500 - 000179f543] BOOTMEM #21 [000179f580 - 000179f7b0] BOOTMEM #22 [000179f7c0 - 000179f828] BOOTMEM #23 [000179f840 - 000179f8a8] BOOTMEM #24 [000179f8c0 - 000179f928] BOOTMEM #25 [000179f940 - 000179f9a8] BOOTMEM #26 [000179f9c0 - 000179fa28] BOOTMEM #27 [000179fa40 - 000179faa8] BOOTMEM #28 [000179fac0 - 000179fb28] BOOTMEM #29 [000179fb40 - 000179fba8] BOOTMEM #30 [000179fbc0 - 000179fc28] BOOTMEM #31 [000179fc40 - 000179fc60] BOOTMEM #32 [000179fc80 - 000179fd0e] BOOTMEM #33 [000179fd40 - 000179fdce] BOOTMEM #34 [0001800000 - 000181b000] BOOTMEM #35 [0001880000 - 000189b000] BOOTMEM #36 [0001900000 - 000191b000] BOOTMEM #37 [0001980000 - 000199b000] BOOTMEM #38 [000179fe00 - 000179fe08] BOOTMEM #39 [000179fe40 - 000179fe48] BOOTMEM #40 [000179fe80 - 000179fe90] BOOTMEM #41 [000179fec0 - 000179fee0] BOOTMEM #42 [00017ad280 - 00017ad3b0] BOOTMEM #43 [000179ff00 - 000179ff50] BOOTMEM #44 [000179ff80 - 000179ffd0] BOOTMEM #45 [00017af000 - 00017b7000] BOOTMEM #46 [000199b000 - 0001b9b000] BOOTMEM #47 [0001b9b000 - 0001c9b000] BOOTMEM Memory: 2056064k/2096640k available (4069k kernel code, 460k absent, 40116k reserved, 2388k data, 496k init) Hierarchical RCU implementation. NR_IRQS:384 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty1] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2333.256 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4668.95 BogoMIPS (lpj=7777520) Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20100121 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b Booting Node 0, Processors #1 Brought up 2 CPUs Total of 2 processors activated (9331.91 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: SSDT 000000007ff8e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) ACPI: SSDT 000000007ff8e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f] pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f] pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f] pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f] pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) pci 0000:00:1f.2: reg 10: [io 0xa000-0xa007] pci 0000:00:1f.2: reg 14: [io 0x9c00-0x9c03] pci 0000:00:1f.2: reg 18: [io 0x9880-0x9887] pci 0000:00:1f.2: reg 1c: [io 0x9800-0x9803] pci 0000:00:1f.2: reg 20: [io 0x9480-0x948f] pci 0000:00:1f.2: reg 24: [io 0x9400-0x940f] pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] pci 0000:00:1f.5: reg 10: [io 0xb000-0xb007] pci 0000:00:1f.5: reg 14: [io 0xac00-0xac03] pci 0000:00:1f.5: reg 18: [io 0xa880-0xa887] pci 0000:00:1f.5: reg 1c: [io 0xa800-0xa803] pci 0000:00:1f.5: reg 20: [io 0xa480-0xa48f] pci 0000:00:1f.5: reg 24: [io 0xa400-0xa40f] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] pci 0000:01:00.0: reg 24: [io 0xcc00-0xcc7f] pci 0000:01:00.0: reg 30: [mem 0xfe8e0000-0xfe8fffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe8fffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 04-04] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] pci 0000:03:00.0: reg 10: [io 0xdc00-0xdc07] pci 0000:03:00.0: reg 14: [io 0xd880-0xd883] pci 0000:03:00.0: reg 18: [io 0xd800-0xd807] pci 0000:03:00.0: reg 1c: [io 0xd480-0xd483] pci 0000:03:00.0: reg 20: [io 0xd400-0xd40f] pci 0000:03:00.0: reg 24: [mem 0xfeaffc00-0xfeafffff] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: PME# supported from D0 D1 D3hot pci 0000:03:00.0: PME# disabled pci 0000:00:1c.4: PCI bridge to [bus 03-03] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:02:00.0: reg 10: [mem 0xfe9c0000-0xfe9fffff 64bit] pci 0000:02:00.0: reg 30: [mem 0xfe9a0000-0xfe9bffff pref] pci 0000:02:00.0: PME# supported from D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.5: PCI bridge to [bus 02-02] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff] pci 0000:05:00.0: reg 14: [mem 0xfebffc00-0xfebffcff] pci 0000:05:00.0: supports D1 D2 pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:05:01.0: reg 10: [mem 0xfebff000-0xfebff7ff] pci 0000:05:01.0: reg 14: [io 0xec00-0xec7f] pci 0000:05:01.0: supports D2 pci 0000:05:01.0: PME# supported from D2 D3hot D3cold pci 0000:05:01.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009dc00 - 000000000009ffff reserve RAM buffer: 000000007ff80000 - 000000007fffffff Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. HPET: 4 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved system 00:07: [io 0x0290-0x0297] has been reserved system 00:08: [io 0x04d0-0x04d1] has been reserved system 00:08: [io 0x0800-0x087f] has been reserved system 00:08: [io 0x0480-0x04bf] has been reserved system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved system 00:08: [mem 0xffa00000-0xffafffff] has been reserved system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved system 00:08: [mem 0xffe00000-0xffefffff] has been reserved system 00:08: [mem 0xfff00000-0xfffffffe] has been reserved system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0e: [mem 0x000c0000-0x000cffff] has been reserved system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0e: [mem 0x00100000-0x7fffffff] could not be reserved pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x803fffff] pci 0000:00:1c.4: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref] pci 0000:00:1c.5: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] pci 0000:00:1c.5: BAR 7: assigned [io 0x2000-0x2fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe8fffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 04-04] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x803fffff] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 03-03] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:1c.4: bridge window [mem 0x80400000-0x805fffff 64bit pref] pci 0000:00:1c.5: PCI bridge to [bus 02-02] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:1c.5: bridge window [mem 0x80600000-0x807fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 05-05] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: enabling device (0106 -> 0107) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: enabling device (0106 -> 0107) pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe8fffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] pci_bus 0000:04: resource 1 [mem 0x80000000-0x803fffff] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:02: resource 2 [mem 0x80600000-0x807fffff 64bit pref] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:05: resource 8 [mem 0x80000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:01:00.0: Boot video device PCI: CLS 32 bytes, default 64 HugeTLB registered 2 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Slow work thread pool: Starting up Slow work thread pool: Ready NTFS driver 2.1.29 [Flags: R/O]. ROMFS MTD (C) 2007 Red Hat, Inc. msgmni has been set to 4015 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:01.0: irq 24 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X pcieport 0000:00:1c.5: setting latency timer to 64 pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X Linux agpgart interface v0.103 uvesafb: NVIDIA Corporation, G86 Board - p403h24 , Chip Rev , OEM: NVIDIA, VBE v3.0 uvesafb: VBIOS/hardware supports DDC2 transfers uvesafb: monitor limits: vf = 75 Hz, hf = 83 kHz, clk = 140 MHz uvesafb: scrolling: redraw Console: switching to colour frame buffer device 180x56 uvesafb: framebuffer at 0xfb000000, mapped to 0xffffc90010100000, using 10125k, total 14336k fb0: VESA VGA frame buffer device input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] Marking TSC unstable due to TSC halts in idle Switching to clocksource hpet Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded ahci 0000:03:00.0: version 3.0 ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22 ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22 ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22 ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22 PPP generic driver version 2.4.2 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Fusion MPT base driver 3.04.14 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.14 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder usbcore: registered new interface driver usbhid usbhid: USB HID core driver oprofile: using NMI interrupt. IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: HPA detected: current 488395055, native 488397168 ata1.00: ATA-7: ST3250310AS, 3.AAC, max UDMA/133 ata1.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3250310AS 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488395055 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk REISERFS (device sda6): found reiserfs format "3.6" with standard journal REISERFS (device sda6): using ordered data mode REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda6): checking transaction log (sda6) REISERFS (device sda6): Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly on device 8:6. Freeing unused kernel memory: 496k freed udev: starting version 149 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00 ohci1394 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [dma 1024-1039 pref window disabled] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 8-0:1.0: USB hub found hub 8-0:1.0: 6 ports detected ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[febff000-febff7ff] Max Packet=[2048] IR/IT contexts=[8/8] input: PC Speaker as /devices/platform/pcspkr/input/input3 8139too: 8139too Fast Ethernet driver 0.9.28 8139too 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 8139too 0000:05:00.0: eth0: RealTek RTL8139 at 0xffffc90010c2cc00, 00:13:49:0a:77:dd, IRQ 16 atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 atl1 0000:02:00.0: setting latency timer to 64 atl1 0000:02:00.0: version 2.1.3 udev: renamed network interface eth0 to eth1 pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_marvell 0000:03:00.0: setting latency timer to 64 scsi4 : pata_marvell scsi5 : pata_marvell ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16 ata6: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16 usb 8-4: new high speed USB device using ehci_hcd and address 2 usb 8-6: new high speed USB device using ehci_hcd and address 3 ata5.01: ATAPI: DVD-ROM DDU1621, VER S3.5, max UDMA/33 ata5.01: configured for UDMA/33 scsi 4:0:1:0: CD-ROM SONY DVD-ROM DDU1621 S3.5 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 39x/40x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:1:0: Attached scsi CD-ROM sr0 sr 4:0:1:0: Attached scsi generic sg1 type 5 Initializing USB Mass Storage driver... scsi6 : usb-storage 8-4:1.0 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint usb 3-2: new low speed USB device using uhci_hcd and address 2 input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1a.2/usb3/3-2/3-2:1.0/input/input4 generic-usb 0003:046D:C00C.0001: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1a.2-2/input0 ATK0110 ATK0110:00: adding... ATK0110 ATK0110:00: board ID = P5K-SE ATK0110 ATK0110:00: Using old hwmon interface ATK0110 ATK0110:00: voltage: 0x6020000 Vcore Voltage [850-1600] enabled ATK0110 ATK0110:00: voltage: 0x6020001 +3.3 Voltage [2970-3630] enabled ATK0110 ATK0110:00: voltage: 0x6020002 +5 Voltage [4500-5500] enabled ATK0110 ATK0110:00: voltage: 0x6020003 +12 Voltage [10200-13800] enabled ATK0110 ATK0110:00: temperature: 0x6030000 CPU Temperature [600-950] enabled ATK0110 ATK0110:00: temperature: 0x6030001 MB Temperature [450-950] enabled ATK0110 ATK0110:00: fan: 0x6040000 CPU FAN Speed [600-7200] enabled ATK0110 ATK0110:00: fan: 0x6040001 CHASSIS FAN Speed [600-7200] enabled ATK0110 ATK0110:00: fan: 0x6040002 POWER FAN Speed [600-7200] enabled ATK0110 ATK0110:00: registering hwmon device ATK0110 ATK0110:00: populating sysfs directory ieee1394: Host added: ID:BUS[0-00:1023] GUID[001106000000494f] dib0700: loaded with support for 14 different device-types dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Hauppauge Nova-T Stick) HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: ALC883: BIOS auto-probing. nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.24 Thu Apr 22 19:10:14 PDT 2010 DVB: registering adapter 0 frontend 0 (DiBcom 7000MA/MB/PA/PB/MC)... MT2060: successfully identified (IF1 = 1254) scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 9732 PQ: 0 ANSI: 0 sd 6:0:0:0: Attached scsi generic sg2 type 0 scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE 9732 PQ: 0 ANSI: 0 sd 6:0:0:1: Attached scsi generic sg3 type 0 scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE 9732 PQ: 0 ANSI: 0 sd 6:0:0:2: Attached scsi generic sg4 type 0 sd 6:0:0:0: [sdb] Attached SCSI removable disk scsi 6:0:0:3: Direct-Access Generic STORAGE DEVICE 9732 PQ: 0 ANSI: 0 sd 6:0:0:3: Attached scsi generic sg5 type 0 sd 6:0:0:1: [sdc] Attached SCSI removable disk scsi 6:0:0:4: Direct-Access Generic STORAGE DEVICE 9732 PQ: 0 ANSI: 0 sd 6:0:0:4: Attached scsi generic sg6 type 0 sd 6:0:0:3: [sde] Attached SCSI removable disk sd 6:0:0:4: [sdf] Attached SCSI removable disk sd 6:0:0:2: [sdd] Attached SCSI removable disk input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb8/8-6/input/input5 dvb-usb: schedule remote query interval to 50 msecs. dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected. dib0700: rc submit urb failed usbcore: registered new interface driver dvb_usb_dib0700 REISERFS (device sda7): found reiserfs format "3.6" with standard journal REISERFS (device sda7): using ordered data mode REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sda7): checking transaction log (sda7) REISERFS (device sda7): Using r5 hash to sort names Adding 4104572k swap on /dev/sda5. Priority:-1 extents:1 across:4104572k fbcondecor: console 0 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 0 fbcondecor: console 1 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 1 fbcondecor: console 2 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 2 fbcondecor: console 3 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 3 fbcondecor: console 4 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 4 fbcondecor: console 5 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 5 fbcondecor: console 6 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 6 fbcondecor: console 7 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 7 fbcondecor: console 8 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 8 fbcondecor: console 9 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 9 fbcondecor: console 10 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 10 fbcondecor: console 11 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 11 atl1 0000:02:00.0: irq 29 for MSI/MSI-X atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! eth0: no IPv6 routers present svc: failed to register lockdv1 RPC service (errno 97). fbcondecor: console 6 using theme 'natural_gentoo' fbcondecor: switched decor state to 'on' on console 6 BUG: unable to handle kernel NULL pointer dereference at 0000000000000012 IP: [] i2c_transfer+0x1c/0xd0 [i2c_core] PGD 7c2f4067 PUD 7c304067 PMD 0 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/platform/coretemp.1/temp1_input CPU 1 Modules linked in: coretemp snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_hda_codec_realtek snd_hda_intel snd_hda_codec dvb_usb_dib0700 dib7000p dib7000m dib0070 dvb_usb dib8000 mt2266 tuner_xc2028 dib3000mc snd_pcm dibx000_common mxl5007t snd_timer xc5000 s5h1411 mt2060 lgdt3305 dvb_core asus_atk0110 nvidia(P) usb_storage snd hwmon pata_marvell atl1 8139too mii pcspkr i2c_i801 ohci1394 i2c_core ehci_hcd snd_page_alloc uhci_hcd Pid: 7738, comm: kaffeine Tainted: P 2.6.34-gentoo-r1 #1 P5K SE/P5K SE RIP: 0010:[] [] i2c_transfer+0x1c/0xd0 [i2c_core] RSP: 0018:ffff88007eb33ba8 EFLAGS: 00010292 RAX: ffff88007eb33c08 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 0000000000000002 RSI: ffff88007eb33be8 RDI: 0000000000000002 RBP: 00000000ffffffa1 R08: 0000000050000d80 R09: 0000000000000000 R10: ffffe8ffffffffff R11: ffffffff00000080 R12: ffff88007bedb800 R13: 0000000000000001 R14: 0000000000000002 R15: ffff88007eb33be8 FS: 00007f31d179d760(0000) GS:ffff880001880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000012 CR3: 000000007c219000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kaffeine (pid: 7738, threadinfo ffff88007eb32000, task ffff88007ef44700) Stack: ffff88007c32e4d8 00000000000000eb 0000000000000001 ffff88007bedb800 <0> 0000000000000001 ffffc90011c06000 ffff88007ba83038 ffffffffa0ca9109 <0> 000000020000000c ffff88007eb33c18 000000020001000c ffff88007eb33c08 Call Trace: [] ? dib7000p_read_word+0x6e/0xbe [dib7000p] [] ? usb_urb_submit+0x26/0x6a [dvb_usb] [] ? dib7000p_pid_filter_ctrl+0x1e/0x74 [dib7000p] [] ? dvb_usb_ctrl_feed+0xcc/0x114 [dvb_usb] [] ? dmx_ts_feed_start_filtering+0x72/0xbe [dvb_core] [] ? dvb_dmxdev_start_feed+0xbe/0xe6 [dvb_core] [] ? dvb_dmxdev_filter_start+0x2aa/0x314 [dvb_core] [] ? dvb_dmxdev_add_pid+0x5e/0x129 [dvb_core] [] ? dvb_demux_do_ioctl+0x2fc/0x547 [dvb_core] [] ? dvb_usercopy+0xb4/0x10f [dvb_core] [] ? dvb_demux_do_ioctl+0x0/0x547 [dvb_core] [] ? vfs_ioctl+0x69/0x92 [] ? do_vfs_ioctl+0x41c/0x454 [] ? fget_light+0xb7/0xe4 [] ? sys_ioctl+0x3d/0x5c [] ? system_call_fastpath+0x16/0x1b Code: c2 28 01 02 a0 e8 8f 44 26 e1 48 83 c4 18 c3 41 57 49 89 f7 41 56 41 89 d6 41 55 41 54 55 bd a1 ff ff ff 53 48 89 fb 48 83 ec 08 <48> 8b 47 10 48 83 38 00 0f 84 97 00 00 00 65 48 8b 04 25 48 b5 RIP [] i2c_transfer+0x1c/0xd0 [i2c_core] RSP CR2: 0000000000000012 ---[ end trace 72adf8ba70a60d92 ]---