dmesg after boot

dmesg.log (text/plain), 49.76 KB, created by Marco Napetti on 2010-06-29 19:04:51 UTC

Linux version 2.6.35-rc3-git3 (root@demonio) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.0, pie-0.4.5) ) #1 SMP Tue Jun 29 19:57:11 CEST 2010
Command line: root=/dev/sda2 vga=0x323 splash=verbose video=vesafb:mtrr,ywrap
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000006ff90000 (usable)
 BIOS-e820: 000000006ff90000 - 000000006ffa8000 (ACPI data)
 BIOS-e820: 000000006ffa8000 - 000000006ffd0000 (ACPI NVS)
 BIOS-e820: 000000006ffd0000 - 0000000070000000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x6ff90 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FFC0000000 write-back
  1 base 0040000000 mask FFE0000000 write-back
  2 base 0060000000 mask FFF0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
init_memory_mapping: 0000000000000000-000000006ff90000
 0000000000 - 006fe00000 page 2M
 006fe00000 - 006ff90000 page 4k
kernel direct mapping tables up to 6ff90000 @ 16000-1a000
ACPI: RSDP 00000000000fb8b0 00024 (v02 ACPIAM)
ACPI: XSDT 000000006ff90100 00054 (v01 070309 XSDT0935 20090703 MSFT 00000097)
ACPI: FACP 000000006ff90290 000F4 (v03 070309 FACP0935 20090703 MSFT 00000097)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20100428/tbfadt-557)
ACPI: DSDT 000000006ff90450 0DAFE (v01  A1150 A1150000 00000000 INTL 20060113)
ACPI: FACS 000000006ffa8000 00040
ACPI: APIC 000000006ff90390 0007C (v01 070309 APIC0935 20090703 MSFT 00000097)
ACPI: MCFG 000000006ff90410 0003C (v01 070309 OEMMCFG  20090703 MSFT 00000097)
ACPI: OEMB 000000006ffa8040 00072 (v01 070309 OEMB0935 20090703 MSFT 00000097)
ACPI: HPET 000000006ff9f450 00038 (v01 070309 OEMHPET  20090703 MSFT 00000097)
ACPI: SSDT 000000006ff9f490 002CC (v01 A M I  POWERNOW 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000006ff90000
Initmem setup node 0 0000000000000000-000000006ff90000
  NODE_DATA [000000000192a2c0 - 000000000192f2bf]
 [ffffea0000000000-ffffea00019fffff] PMD -> [ffff880002200000-ffff880003bfffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0006ff90
On node 0 totalpages: 458527
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3927 pages, LIFO batch:0
  DMA32 zone: 6215 pages used for memmap
  DMA32 zone: 448329 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 6 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [18000 - 187ff]
Allocating PCI resources starting at 70000000 (gap: 70000000:8ff00000)
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff880001a00000 s80448 r8192 d21952 u262144
pcpu-alloc: s80448 r8192 d21952 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - - 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 452256
Policy zone: DMA32
Kernel command line: root=/dev/sda2 vga=0x323 splash=verbose video=vesafb:mtrr,ywrap
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 9cac000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Subtract (47 early reservations)
  #1 [0001000000 - 00019295c4]   TEXT DATA BSS
  #2 [000192a000 - 000192a290]             BRK
  #3 [00000ff790 - 0000100000]   BIOS reserved
  #4 [00000ff780 - 00000ff790]    MP-table mpf
  #5 [000009fc00 - 00000f0fe0]   BIOS reserved
  #6 [00000f1154 - 00000ff780]   BIOS reserved
  #7 [00000f0fe0 - 00000f1154]    MP-table mpc
  #8 [0000010000 - 0000012000]      TRAMPOLINE
  #9 [0000012000 - 0000016000]     ACPI WAKEUP
  #10 [0000016000 - 0000018000]         PGTABLE
  #11 [000192a2c0 - 000192f2c0]       NODE_DATA
  #12 [000192f2c0 - 00019302c0]         BOOTMEM
  #13 [0001929600 - 0001929750]         BOOTMEM
  #14 [0002131000 - 0002132000]         BOOTMEM
  #15 [0002132000 - 0002133000]         BOOTMEM
  #16 [0002200000 - 0003c00000]        MEMMAP 0
  #17 [0001929780 - 0001929900]         BOOTMEM
  #18 [00019302c0 - 000193c2c0]         BOOTMEM
  #19 [000193d000 - 000193e000]         BOOTMEM
  #20 [0001929900 - 0001929941]         BOOTMEM
  #21 [0001929980 - 00019299c3]         BOOTMEM
  #22 [0001929a00 - 0001929bf8]         BOOTMEM
  #23 [0001929c00 - 0001929c68]         BOOTMEM
  #24 [0001929c80 - 0001929ce8]         BOOTMEM
  #25 [0001929d00 - 0001929d68]         BOOTMEM
  #26 [0001929d80 - 0001929de8]         BOOTMEM
  #27 [0001929e00 - 0001929e68]         BOOTMEM
  #28 [0001929e80 - 0001929ee8]         BOOTMEM
  #29 [0001929f00 - 0001929f68]         BOOTMEM
  #30 [0001929f80 - 0001929fe8]         BOOTMEM
  #31 [000193c2c0 - 000193c300]         BOOTMEM
  #32 [000193c300 - 000193c340]         BOOTMEM
  #33 [0001a00000 - 0001a1b000]         BOOTMEM
  #34 [0001a40000 - 0001a5b000]         BOOTMEM
  #35 [0001a80000 - 0001a9b000]         BOOTMEM
  #36 [0001ac0000 - 0001adb000]         BOOTMEM
  #37 [0001b00000 - 0001b1b000]         BOOTMEM
  #38 [0001b40000 - 0001b5b000]         BOOTMEM
  #39 [000193c340 - 000193c348]         BOOTMEM
  #40 [000193c380 - 000193c388]         BOOTMEM
  #41 [000193c3c0 - 000193c3d8]         BOOTMEM
  #42 [000193c400 - 000193c430]         BOOTMEM
  #43 [000193c440 - 000193c560]         BOOTMEM
  #44 [000193c580 - 000193c5c8]         BOOTMEM
  #45 [000193c600 - 000193c648]         BOOTMEM
  #46 [000193e000 - 0001946000]         BOOTMEM
Memory: 1797300k/1834560k available (4756k kernel code, 452k absent, 36808k reserved, 3075k data, 676k init)
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:1280
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2809.627 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5619.25 BogoMIPS (lpj=11238508)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
ACPI: Core revision 20100428
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03
Booting Node   0, Processors  #1
Brought up 2 CPUs
Total of 2 processors activated (11238.13 BogoMIPS).
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 0000000080000000 aka 2048M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [80000000, cfffffff]
node 0 link 0: mmio [d0000000, efffffff]
node 0 link 0: mmio [f0000000, fbbfffff]
node 0 link 0: mmio [fbc00000, fbdfffff]
node 0 link 0: mmio [fbe00000, ffefffff]
bus: [00, 07] on node 0 link 0
bus: 00 index 0 [io  0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0x80000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI Warning: Incorrect checksum in table [OEMB] - 0x4D, should be 0x44 (20100428/tbutils-314)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0x70000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci_bus 0000:00: scanning bus
pci 0000:00:00.0: found [1022:9600] class 000600 header type 00
pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:01.0: found [1043:9602] class 000604 header type 01
pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:06.0: found [1022:9606] class 000604 header type 01
pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:11.0: found [1002:4390] class 000101 header type 00
pci 0000:00:11.0: calling quirk_no_ata_d3+0x0/0x16
pci 0000:00:11.0: reg 10: [io  0xb000-0xb007]
pci 0000:00:11.0: reg 14: [io  0xa000-0xa003]
pci 0000:00:11.0: reg 18: [io  0x9000-0x9007]
pci 0000:00:11.0: reg 1c: [io  0x8000-0x8003]
pci 0000:00:11.0: reg 20: [io  0x7000-0x700f]
pci 0000:00:11.0: reg 24: [mem 0xfbbffc00-0xfbbfffff]
pci 0000:00:11.0: calling quirk_amd_ide_mode+0x0/0xdf
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:11.0: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:12.0: found [1002:4397] class 000c03 header type 00
pci 0000:00:12.0: calling quirk_no_ata_d3+0x0/0x16
pci 0000:00:12.0: reg 10: [mem 0xfbbfd000-0xfbbfdfff]
pci 0000:00:12.0: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:12.1: found [1002:4398] class 000c03 header type 00
pci 0000:00:12.1: calling quirk_no_ata_d3+0x0/0x16
pci 0000:00:12.1: reg 10: [mem 0xfbbfe000-0xfbbfefff]
pci 0000:00:12.1: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:12.2: found [1002:4396] class 000c03 header type 00
pci 0000:00:12.2: calling quirk_no_ata_d3+0x0/0x16
pci 0000:00:12.2: reg 10: [mem 0xfbbff800-0xfbbff8ff]
pci 0000:00:12.2: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: found [1002:4397] class 000c03 header type 00
pci 0000:00:13.0: calling quirk_no_ata_d3+0x0/0x16
pci 0000:00:13.0: reg 10: [mem 0xfbbfb000-0xfbbfbfff]
pci 0000:00:13.0: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:13.1: found [1002:4398] class 000c03 header type 00
pci 0000:00:13.1: calling quirk_no_ata_d3+0x0/0x16
pci 0000:00:13.1: reg 10: [mem 0xfbbfc000-0xfbbfcfff]
pci 0000:00:13.1: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:13.2: found [1002:4396] class 000c03 header type 00
pci 0000:00:13.2: calling quirk_no_ata_d3+0x0/0x16
pci 0000:00:13.2: reg 10: [mem 0xfbbff400-0xfbbff4ff]
pci 0000:00:13.2: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: found [1002:4385] class 000c05 header type 00
pci 0000:00:14.0: calling quirk_no_ata_d3+0x0/0x16
pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x4f
pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0xf
pci 0000:00:14.0: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:14.1: found [1002:439c] class 000101 header type 00
pci 0000:00:14.1: calling quirk_no_ata_d3+0x0/0x16
pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io  0xff00-0xff0f]
pci 0000:00:14.1: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:14.3: found [1002:439d] class 000601 header type 00
pci 0000:00:14.3: calling quirk_no_ata_d3+0x0/0x16
pci 0000:00:14.3: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:14.4: found [1002:4384] class 000604 header type 01
pci 0000:00:14.4: calling quirk_no_ata_d3+0x0/0x16
pci 0000:00:14.4: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:14.5: found [1002:4399] class 000c03 header type 00
pci 0000:00:14.5: calling quirk_no_ata_d3+0x0/0x16
pci 0000:00:14.5: reg 10: [mem 0xfbbfa000-0xfbbfafff]
pci 0000:00:14.5: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:18.0: found [1022:1100] class 000600 header type 00
pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:18.1: found [1022:1101] class 000600 header type 00
pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:18.2: found [1022:1102] class 000600 header type 00
pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x1be
pci 0000:00:18.3: found [1022:1103] class 000600 header type 00
pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x1be
pci_bus 0000:00: fixups for bus
pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 0
pci_bus 0000:01: scanning bus
pci 0000:01:05.0: found [1002:9610] class 000300 header type 00
pci 0000:01:05.0: calling quirk_no_ata_d3+0x0/0x16
pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:05.0: reg 14: [io  0xc000-0xc0ff]
pci 0000:01:05.0: reg 18: [mem 0xfbde0000-0xfbdeffff]
pci 0000:01:05.0: reg 24: [mem 0xfbc00000-0xfbcfffff]
pci 0000:01:05.0: calling quirk_resource_alignment+0x0/0x1be
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.1: found [1002:960f] class 000403 header type 00
pci 0000:01:05.1: calling quirk_no_ata_d3+0x0/0x16
pci 0000:01:05.1: reg 10: [mem 0xfbdfc000-0xfbdfffff]
pci 0000:01:05.1: calling quirk_resource_alignment+0x0/0x1be
pci 0000:01:05.1: supports D1 D2
pci_bus 0000:01: fixups for bus
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfbc00000-0xfbdfffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:01: bus scan returning with max=01
pci 0000:00:06.0: scanning [bus 02-02] behind bridge, pass 0
pci_bus 0000:02: scanning bus
pci 0000:02:00.0: found [1969:1026] class 000200 header type 00
pci 0000:02:00.0: reg 10: [mem 0xfbec0000-0xfbefffff 64bit]
pci 0000:02:00.0: reg 18: [io  0xdc00-0xdc7f]
pci 0000:02:00.0: calling quirk_resource_alignment+0x0/0x1be
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci_bus 0000:02: fixups for bus
pci 0000:00:06.0: PCI bridge to [bus 02-02]
pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:06.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:06.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci_bus 0000:02: bus scan returning with max=02
pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 0
pci_bus 0000:03: scanning bus
pci 0000:03:05.0: found [168c:0013] class 000200 header type 00
pci 0000:03:05.0: reg 10: [mem 0xfbff0000-0xfbffffff]
pci 0000:03:05.0: calling quirk_resource_alignment+0x0/0x1be
pci 0000:03:06.0: found [1131:7133] class 000480 header type 00
pci 0000:03:06.0: reg 10: [mem 0xfbfef800-0xfbfeffff]
pci 0000:03:06.0: calling quirk_resource_alignment+0x0/0x1be
pci 0000:03:06.0: supports D1 D2
pci 0000:03:07.0: found [1102:0004] class 000401 header type 00
pci 0000:03:07.0: reg 10: [io  0xe880-0xe89f]
pci 0000:03:07.0: calling quirk_resource_alignment+0x0/0x1be
pci 0000:03:07.0: supports D1 D2
pci 0000:03:07.1: found [1102:7003] class 000980 header type 00
pci 0000:03:07.1: reg 10: [io  0xec00-0xec07]
pci 0000:03:07.1: calling quirk_resource_alignment+0x0/0x1be
pci 0000:03:07.1: supports D1 D2
pci 0000:03:07.2: found [1102:4001] class 000c00 header type 00
pci 0000:03:07.2: reg 10: [mem 0xfbfef000-0xfbfef7ff]
pci 0000:03:07.2: reg 14: [mem 0xfbfe8000-0xfbfebfff]
pci 0000:03:07.2: calling quirk_resource_alignment+0x0/0x1be
pci 0000:03:07.2: supports D1 D2
pci 0000:03:07.2: PME# supported from D0 D1 D2 D3hot
pci 0000:03:07.2: PME# disabled
pci_bus 0000:03: fixups for bus
pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xe000-0xefff]
pci 0000:00:14.4:   bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x70000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:03: bus scan returning with max=03
pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 1
pci 0000:00:06.0: scanning [bus 02-02] behind bridge, pass 1
pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 1
pci_bus 0000:00: bus scan returning with max=03
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.23.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:11.0: BAR 0: reserving [io  0xb000-0xb007 flags 0x40101] (d=0, p=0)
pci 0000:00:11.0: BAR 1: reserving [io  0xa000-0xa003 flags 0x40101] (d=0, p=0)
pci 0000:00:11.0: BAR 2: reserving [io  0x9000-0x9007 flags 0x40101] (d=0, p=0)
pci 0000:00:11.0: BAR 3: reserving [io  0x8000-0x8003 flags 0x40101] (d=0, p=0)
pci 0000:00:11.0: BAR 4: reserving [io  0x7000-0x700f flags 0x40101] (d=0, p=0)
pci 0000:00:11.0: BAR 5: reserving [mem 0xfbbffc00-0xfbbfffff flags 0x40200] (d=0, p=0)
pci 0000:00:12.0: BAR 0: reserving [mem 0xfbbfd000-0xfbbfdfff flags 0x40200] (d=0, p=0)
pci 0000:00:12.1: BAR 0: reserving [mem 0xfbbfe000-0xfbbfefff flags 0x40200] (d=0, p=0)
pci 0000:00:12.2: BAR 0: reserving [mem 0xfbbff800-0xfbbff8ff flags 0x40200] (d=0, p=0)
pci 0000:00:13.0: BAR 0: reserving [mem 0xfbbfb000-0xfbbfbfff flags 0x40200] (d=0, p=0)
pci 0000:00:13.1: BAR 0: reserving [mem 0xfbbfc000-0xfbbfcfff flags 0x40200] (d=0, p=0)
pci 0000:00:13.2: BAR 0: reserving [mem 0xfbbff400-0xfbbff4ff flags 0x40200] (d=0, p=0)
pci 0000:00:14.1: BAR 0: reserving [io  0x01f0-0x01f7 flags 0x110] (d=0, p=0)
pci 0000:00:14.1: BAR 1: reserving [io  0x03f6 flags 0x110] (d=0, p=0)
pci 0000:00:14.1: BAR 2: reserving [io  0x0170-0x0177 flags 0x110] (d=0, p=0)
pci 0000:00:14.1: BAR 3: reserving [io  0x0376 flags 0x110] (d=0, p=0)
pci 0000:00:14.1: BAR 4: reserving [io  0xff00-0xff0f flags 0x40101] (d=0, p=0)
pci 0000:00:14.5: BAR 0: reserving [mem 0xfbbfa000-0xfbbfafff flags 0x40200] (d=0, p=0)
pci 0000:01:05.0: BAR 0: reserving [mem 0xd0000000-0xdfffffff flags 0x42208] (d=0, p=0)
pci 0000:01:05.0: BAR 1: reserving [io  0xc000-0xc0ff flags 0x40101] (d=0, p=0)
pci 0000:01:05.0: BAR 2: reserving [mem 0xfbde0000-0xfbdeffff flags 0x40200] (d=0, p=0)
pci 0000:01:05.0: BAR 5: reserving [mem 0xfbc00000-0xfbcfffff flags 0x40200] (d=0, p=0)
pci 0000:01:05.1: BAR 0: reserving [mem 0xfbdfc000-0xfbdfffff flags 0x40200] (d=0, p=0)
pci 0000:02:00.0: BAR 0: reserving [mem 0xfbec0000-0xfbefffff flags 0x140204] (d=0, p=0)
pci 0000:02:00.0: BAR 2: reserving [io  0xdc00-0xdc7f flags 0x40101] (d=0, p=0)
pci 0000:03:05.0: BAR 0: reserving [mem 0xfbff0000-0xfbffffff flags 0x40200] (d=0, p=0)
pci 0000:03:06.0: BAR 0: reserving [mem 0xfbfef800-0xfbfeffff flags 0x40200] (d=0, p=0)
pci 0000:03:07.0: BAR 0: reserving [io  0xe880-0xe89f flags 0x40101] (d=0, p=0)
pci 0000:03:07.1: BAR 0: reserving [io  0xec00-0xec07 flags 0x40101] (d=0, p=0)
pci 0000:03:07.2: BAR 0: reserving [mem 0xfbfef000-0xfbfef7ff flags 0x40200] (d=0, p=0)
pci 0000:03:07.2: BAR 1: reserving [mem 0xfbfe8000-0xfbfebfff flags 0x40200] (d=0, p=0)
reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
reserve RAM buffer: 000000006ff90000 - 000000006fffffff 
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0x70000000-0x7fffffff] has been reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x040b] has been reserved
system 00:08: [io  0x04d6] has been reserved
system 00:08: [io  0x0c00-0x0c01] has been reserved
system 00:08: [io  0x0c14] has been reserved
system 00:08: [io  0x0c50-0x0c51] has been reserved
system 00:08: [io  0x0c52] has been reserved
system 00:08: [io  0x0c6c] has been reserved
system 00:08: [io  0x0c6f] has been reserved
system 00:08: [io  0x0cd0-0x0cd1] has been reserved
system 00:08: [io  0x0cd2-0x0cd3] has been reserved
system 00:08: [io  0x0cd4-0x0cd5] has been reserved
system 00:08: [io  0x0cd6-0x0cd7] has been reserved
system 00:08: [io  0x0cd8-0x0cdf] has been reserved
system 00:08: [io  0x0800-0x089f] has been reserved
system 00:08: [io  0x0b00-0x0b3f] has been reserved
system 00:08: [io  0x0b00-0x0b0f] has been reserved
system 00:08: [io  0x0b20-0x0b3f] has been reserved
system 00:08: [io  0x0900-0x090f] has been reserved
system 00:08: [io  0x0910-0x091f] has been reserved
system 00:08: [io  0xfe00-0xfefe] has been reserved
system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:0b: [io  0x0230-0x023f] has been reserved
system 00:0b: [io  0x0290-0x029f] has been reserved
system 00:0b: [io  0x0f40-0x0f4f] has been reserved
system 00:0b: [io  0x0a30-0x0a3f] has been reserved
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0x6fffffff] could not be reserved
system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfbc00000-0xfbdfffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02-02]
pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:06.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:06.0:   bridge window [mem pref disabled]
pci 0000:00:14.4: PCI bridge to [bus 03-03]
pci 0000:00:14.4:   bridge window [io  0xe000-0xefff]
pci 0000:00:14.4:   bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:14.4:   bridge window [mem pref disabled]
pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:06.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x70000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfbc00000-0xfbdfffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0x70000000-0xdfffffff]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:00.0: calling pci_fixup_video+0x0/0xbe
pci 0000:00:01.0: calling quirk_disable_msi+0x0/0x53
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:01.0: calling pci_fixup_video+0x0/0xbe
pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:06.0: calling pci_fixup_video+0x0/0xbe
pci 0000:00:11.0: calling quirk_msi_intx_disable_ati_bug+0x0/0x38
pci 0000:00:11.0: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:11.0: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:11.0: calling pci_fixup_video+0x0/0xbe
pci 0000:00:12.0: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:12.0: calling pci_fixup_video+0x0/0xbe
pci 0000:00:12.1: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:12.1: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:12.1: calling pci_fixup_video+0x0/0xbe
pci 0000:00:12.2: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:12.2: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:12.2: calling pci_fixup_video+0x0/0xbe
pci 0000:00:13.0: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:13.0: calling pci_fixup_video+0x0/0xbe
pci 0000:00:13.1: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:13.1: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:13.1: calling pci_fixup_video+0x0/0xbe
pci 0000:00:13.2: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:13.2: calling pci_fixup_video+0x0/0xbe
pci 0000:00:14.0: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:14.0: calling pci_fixup_video+0x0/0xbe
pci 0000:00:14.1: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:14.1: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:14.1: calling pci_fixup_video+0x0/0xbe
pci 0000:00:14.3: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:14.3: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:14.3: calling pci_fixup_video+0x0/0xbe
pci 0000:00:14.4: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:14.4: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:14.4: calling pci_fixup_video+0x0/0xbe
pci 0000:00:14.5: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:14.5: calling pci_fixup_video+0x0/0xbe
pci 0000:00:18.0: calling quirk_amd_nb_node+0x0/0x62
pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:18.0: calling pci_fixup_video+0x0/0xbe
pci 0000:00:18.1: calling quirk_amd_nb_node+0x0/0x62
pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:18.1: calling pci_fixup_video+0x0/0xbe
pci 0000:00:18.2: calling quirk_amd_nb_node+0x0/0x62
pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:18.2: calling pci_fixup_video+0x0/0xbe
pci 0000:00:18.3: calling quirk_amd_nb_node+0x0/0x62
pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:00:18.3: calling pci_fixup_video+0x0/0xbe
pci 0000:01:05.0: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:01:05.0: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:01:05.0: calling pci_fixup_video+0x0/0xbe
pci 0000:01:05.0: Boot video device
pci 0000:01:05.1: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:01:05.1: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:01:05.1: calling pci_fixup_video+0x0/0xbe
pci 0000:02:00.0: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:02:00.0: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:02:00.0: calling pci_fixup_video+0x0/0xbe
pci 0000:03:05.0: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:03:05.0: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:03:05.0: calling pci_fixup_video+0x0/0xbe
pci 0000:03:06.0: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:03:06.0: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:03:06.0: calling pci_fixup_video+0x0/0xbe
pci 0000:03:07.0: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:03:07.0: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:03:07.0: calling pci_fixup_video+0x0/0xbe
pci 0000:03:07.1: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:03:07.1: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:03:07.1: calling pci_fixup_video+0x0/0xbe
pci 0000:03:07.2: calling quirk_cardbus_legacy+0x0/0x24
pci 0000:03:07.2: calling quirk_usb_early_handoff+0x0/0x5ae
pci 0000:03:07.2: calling pci_fixup_video+0x0/0xbe
PCI: CLS 64 bytes, default 64
HugeTLB registered 2 MB page size, pre-allocated 0 pages
Slow work thread pool: Starting up
Slow work thread pool: Ready
NTFS driver 2.1.29 [Flags: R/O].
fuse init (API version 7.14)
msgmni has been set to 3510
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:06.0: setting latency timer to 64
pcieport 0000:00:06.0: irq 40 for MSI/MSI-X
pci-stub: invalid id string ""
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010a00000, using 6144k, total 16384k
vesafb: mode is 1024x768x32, linelength=4096, pages=4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22
ata2: SATA max UDMA/133 irq 22, connection status changed
ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
ata4: SATA max UDMA/133 abar m1024@0xfbbffc00 port 0xfbbffe80 irq 22
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
console [netcon0] enabled
netconsole: network logging started
ohci1394 0000:03:07.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23]  MMIO=[fbfef000-fbfef7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
video1394: Installed video1394 module
ieee1394: raw1394: /dev/raw1394 device initialized
ata5.00: ATA-8: WDC WD5000AAKB-00H8A0, 05.04E05, max UDMA/133
ata5.00: 976773168 sectors, multi 16: LBA48 
ata5.01: ATA-7: ST3400620A, 3.AAF, max UDMA/100
ata5.01: 781422768 sectors, multi 16: LBA48 
ata5.00: configured for UDMA/100
ata5.01: configured for UDMA/100
eth1394: eth0: IPv4 over IEEE 1394 (fw-host0)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: enabling bus mastering
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: enabling Mem-Wr-Inval
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbbff800
ata4: SATA link down (SStatus 0 SControl 300)
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.35-rc3-git3 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: enabling bus mastering
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: enabling Mem-Wr-Inval
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbbff400
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.35-rc3-git3 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usbcore: registered new interface driver libusual
usbcore: registered new interface driver mdc800
mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
usbcore: registered new interface driver microtekX6
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
i2c /dev entries driver
ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SOR1 [mem 0x00000b00-0x00000b0f pref]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
md: raid0 personality registered for level 0
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [e-mail]
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: Broadcom Blutonium firmware driver ver 1.2
usbcore: registered new interface driver bcm203x
Bluetooth: Digianswer Bluetooth USB driver ver 0.10
usbcore: registered new interface driver bpa10x
Bluetooth: BlueFRITZ! USB driver ver 1.2
usbcore: registered new interface driver bfusb
cpuidle: using governor ladder
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
EMU10K1_Audigy 0000:03:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ata3: softreset failed (device not ready)
ALSA device list:
  #0: Audigy 1 [Unknown] (rev.3, serial:0x5a1102) at 0xe880, irq 22
oprofile: using NMI interrupt.
ata3: applying SB600 PMP SRST workaround and retrying
TCP cubic registered
usb 1-2: new high speed USB device using ehci_hcd and address 3
ata1: softreset failed (device not ready)
ata1: applying SB600 PMP SRST workaround and retrying
ata2: softreset failed (device not ready)
ata2: applying SB600 PMP SRST workaround and retrying
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c008100725d]
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
usb 1-2: New USB device found, idVendor=04b8, idProduct=011e
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: EPSON Scanner
usb 1-2: Manufacturer: EPSON
Bluetooth: SCO socket layer initialized
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: Optiarc DVD RW AD-7241S, 1.02, max UDMA/100
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
ata1.00: ATA-6: WDC WD800JD-22JNA0, 05.01C05, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA 
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ (2 cpu cores) (version 2.20.00)
ata3.00: ATA-6: WDC WD800JD-23JNA1, 06.01C06, max UDMA/133
powernow-k8:    0 : fid 0x14 (2800 MHz), vid 0xa
powernow-k8:    1 : fid 0x12 (2600 MHz), vid 0xc
powernow-k8:    2 : fid 0x10 (2400 MHz), vid 0xe
powernow-k8:    3 : fid 0xe (2200 MHz), vid 0x10
powernow-k8:    4 : fid 0xc (2000 MHz), vid 0x10
powernow-k8:    5 : fid 0xa (1800 MHz), vid 0x10
powernow-k8:    6 : fid 0x2 (1000 MHz), vid 0x12
ata3.00: 156312576 sectors, multi 16: LBA 
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      WDC WD800JD-22JN 05.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
Clocksource tsc unstable (delta = -272577914 ns)
 sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ata3.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7241S  1.02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
scsi 2:0:0:0: Direct-Access     ATA      WDC WD800JD-23JN 06.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 156312576 512-byte logical blocks: (80.0 GB/74.5 GiB)
scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AAKB-0 05.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc:
scsi 4:0:1:0: Direct-Access     ATA      ST3400620A       3.AA PQ: 0 ANSI: 5
 sdc1
sd 4:0:1:0: [sdd] 781422768 512-byte logical blocks: (400 GB/372 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3
sd 4:0:1:0: [sdd] Write Protect is off
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: [sdc] Attached SCSI disk
sd 4:0:1:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1
sd 4:0:1:0: [sdd] Attached SCSI disk
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
Freeing unused kernel memory: 676k freed
udev: starting version 158
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: enabling bus mastering
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbbfd000
ATL1E 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ATL1E 0000:02:00.0: setting latency timer to 64
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.35-rc3-git3 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbbfe000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.35-rc3-git3 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: enabling bus mastering
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbbfb000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.35-rc3-git3 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbbfc000
ath5k 0000:03:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ath5k 0000:03:05.0: registered as 'phy0'
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.35-rc3-git3 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: enabling bus mastering
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbbfa000
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
phy0: Selected rate control algorithm 'minstrel'
ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
cfg80211: Calling CRDA for country: US
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.35-rc3-git3 ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 3-1: new full speed USB device using ohci_hcd and address 2
usb 3-1: New USB device found, idVendor=046d, idProduct=08da
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
2:2:1: endpoint lacks sample rate attribute bit, cannot set.
usbcore: registered new interface driver snd-usb-audio
usb 3-3: new low speed USB device using ohci_hcd and address 3
usb 3-3: New USB device found, idVendor=046d, idProduct=c312
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Multimedia Keyboard
usb 3-3: Manufacturer: LITEON Technology
input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input2
generic-usb 0003:046D:C312.0001: input: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:12.0-3/input0
usb 4-1: new low speed USB device using ohci_hcd and address 2
usb 4-1: New USB device found, idVendor=046d, idProduct=c501
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB Receiver
usb 4-1: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input3
generic-usb 0003:046D:C501.0002: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.1-1/input0
usb 5-1: new full speed USB device using ohci_hcd and address 2
usb 5-1: device descriptor read/64, error -62
usb 5-1: device descriptor read/64, error -62
usb 5-1: new full speed USB device using ohci_hcd and address 3
EXT4-fs (sda2): re-mounted. Opts: (null)
usb 5-1: device descriptor read/64, error -62
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
usb 5-1: device descriptor read/64, error -62
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdc1): using internal journal
EXT3-fs (sdc1): mounted filesystem with writeback data mode
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdd1): using internal journal
EXT3-fs (sdd1): mounted filesystem with writeback data mode
usb 5-1: new full speed USB device using ohci_hcd and address 4
usb 5-1: device not accepting address 4, error -62
usb 5-1: new full speed USB device using ohci_hcd and address 5
usb 5-1: device not accepting address 5, error -62
hub 5-0:1.0: unable to enumerate USB device on port 1
Adding 5004212k swap on /dev/sdb1.  Priority:-1 extents:1 across:5004212k 
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:02:cf:6a:cc:80 (try 1)
wlan0: authenticated
wlan0: associate with 00:02:cf:6a:cc:80 (try 1)
wlan0: RX AssocResp from 00:02:cf:6a:cc:80 (capab=0x461 status=0 aid=9)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to userspace modesetting.
pci 0000:01:05.0: setting latency timer to 64
[drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0
[drm] Setting GART location based on new memory map
[drm] Loading RS780 CP Microcode
[drm] Resetting GPU
[drm] writeback test succeeded in 1 usecs
wlan0: no IPv6 routers present
X:1272 conflicting memory types d0000000-e0000000 uncached-minus<->write-combining
reserve_memtype failed 0xd0000000-0xe0000000, track uncached-minus, req uncached-minus
[drm] Resetting GPU
X:1272 freeing invalid memtype d0000000-e0000000