Linux version 2.6.35-rc3-git3 (root@demonio) (gcc version 4.4.4 (Gentoo 4.4.4-r1 p1.0, pie-0.4.5) ) #1 SMP Tue Jun 29 19:57:11 CEST 2010 Command line: root=/dev/sda2 vga=0x323 splash=verbose video=vesafb:mtrr,ywrap BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000006ff90000 (usable) BIOS-e820: 000000006ff90000 - 000000006ffa8000 (ACPI data) BIOS-e820: 000000006ffa8000 - 000000006ffd0000 (ACPI NVS) BIOS-e820: 000000006ffd0000 - 0000000070000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x6ff90 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FFC0000000 write-back 1 base 0040000000 mask FFE0000000 write-back 2 base 0060000000 mask FFF0000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000ff780] ff780 init_memory_mapping: 0000000000000000-000000006ff90000 0000000000 - 006fe00000 page 2M 006fe00000 - 006ff90000 page 4k kernel direct mapping tables up to 6ff90000 @ 16000-1a000 ACPI: RSDP 00000000000fb8b0 00024 (v02 ACPIAM) ACPI: XSDT 000000006ff90100 00054 (v01 070309 XSDT0935 20090703 MSFT 00000097) ACPI: FACP 000000006ff90290 000F4 (v03 070309 FACP0935 20090703 MSFT 00000097) ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20100428/tbfadt-557) ACPI: DSDT 000000006ff90450 0DAFE (v01 A1150 A1150000 00000000 INTL 20060113) ACPI: FACS 000000006ffa8000 00040 ACPI: APIC 000000006ff90390 0007C (v01 070309 APIC0935 20090703 MSFT 00000097) ACPI: MCFG 000000006ff90410 0003C (v01 070309 OEMMCFG 20090703 MSFT 00000097) ACPI: OEMB 000000006ffa8040 00072 (v01 070309 OEMB0935 20090703 MSFT 00000097) ACPI: HPET 000000006ff9f450 00038 (v01 070309 OEMHPET 20090703 MSFT 00000097) ACPI: SSDT 000000006ff9f490 002CC (v01 A M I POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000006ff90000 Initmem setup node 0 0000000000000000-000000006ff90000 NODE_DATA [000000000192a2c0 - 000000000192f2bf] [ffffea0000000000-ffffea00019fffff] PMD -> [ffff880002200000-ffff880003bfffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0006ff90 On node 0 totalpages: 458527 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3927 pages, LIFO batch:0 DMA32 zone: 6215 pages used for memmap DMA32 zone: 448329 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8300 base: 0xfed00000 SMP: Allowing 6 CPUs, 4 hotplug CPUs nr_irqs_gsi: 40 early_res array is doubled to 64 at [18000 - 187ff] Allocating PCI resources starting at 70000000 (gap: 70000000:8ff00000) setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:6 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff880001a00000 s80448 r8192 d21952 u262144 pcpu-alloc: s80448 r8192 d21952 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 - - Built 1 zonelists in Node order, mobility grouping on. Total pages: 452256 Policy zone: DMA32 Kernel command line: root=/dev/sda2 vga=0x323 splash=verbose video=vesafb:mtrr,ywrap PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 9cac000000 size 32 MB Aperture beyond 4GB. Ignoring. Subtract (47 early reservations) #1 [0001000000 - 00019295c4] TEXT DATA BSS #2 [000192a000 - 000192a290] BRK #3 [00000ff790 - 0000100000] BIOS reserved #4 [00000ff780 - 00000ff790] MP-table mpf #5 [000009fc00 - 00000f0fe0] BIOS reserved #6 [00000f1154 - 00000ff780] BIOS reserved #7 [00000f0fe0 - 00000f1154] MP-table mpc #8 [0000010000 - 0000012000] TRAMPOLINE #9 [0000012000 - 0000016000] ACPI WAKEUP #10 [0000016000 - 0000018000] PGTABLE #11 [000192a2c0 - 000192f2c0] NODE_DATA #12 [000192f2c0 - 00019302c0] BOOTMEM #13 [0001929600 - 0001929750] BOOTMEM #14 [0002131000 - 0002132000] BOOTMEM #15 [0002132000 - 0002133000] BOOTMEM #16 [0002200000 - 0003c00000] MEMMAP 0 #17 [0001929780 - 0001929900] BOOTMEM #18 [00019302c0 - 000193c2c0] BOOTMEM #19 [000193d000 - 000193e000] BOOTMEM #20 [0001929900 - 0001929941] BOOTMEM #21 [0001929980 - 00019299c3] BOOTMEM #22 [0001929a00 - 0001929bf8] BOOTMEM #23 [0001929c00 - 0001929c68] BOOTMEM #24 [0001929c80 - 0001929ce8] BOOTMEM #25 [0001929d00 - 0001929d68] BOOTMEM #26 [0001929d80 - 0001929de8] BOOTMEM #27 [0001929e00 - 0001929e68] BOOTMEM #28 [0001929e80 - 0001929ee8] BOOTMEM #29 [0001929f00 - 0001929f68] BOOTMEM #30 [0001929f80 - 0001929fe8] BOOTMEM #31 [000193c2c0 - 000193c300] BOOTMEM #32 [000193c300 - 000193c340] BOOTMEM #33 [0001a00000 - 0001a1b000] BOOTMEM #34 [0001a40000 - 0001a5b000] BOOTMEM #35 [0001a80000 - 0001a9b000] BOOTMEM #36 [0001ac0000 - 0001adb000] BOOTMEM #37 [0001b00000 - 0001b1b000] BOOTMEM #38 [0001b40000 - 0001b5b000] BOOTMEM #39 [000193c340 - 000193c348] BOOTMEM #40 [000193c380 - 000193c388] BOOTMEM #41 [000193c3c0 - 000193c3d8] BOOTMEM #42 [000193c400 - 000193c430] BOOTMEM #43 [000193c440 - 000193c560] BOOTMEM #44 [000193c580 - 000193c5c8] BOOTMEM #45 [000193c600 - 000193c648] BOOTMEM #46 [000193e000 - 0001946000] BOOTMEM Memory: 1797300k/1834560k available (4756k kernel code, 452k absent, 36808k reserved, 3075k data, 676k init) Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:1280 Extended CMOS year: 2000 Console: colour dummy device 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2809.627 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5619.25 BogoMIPS (lpj=11238508) pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20100428 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03 Booting Node 0, Processors #1 Brought up 2 CPUs Total of 2 processors activated (11238.13 BogoMIPS). NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 0000000080000000 aka 2048M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [80000000, cfffffff] node 0 link 0: mmio [d0000000, efffffff] node 0 link 0: mmio [f0000000, fbbfffff] node 0 link 0: mmio [fbc00000, fbdfffff] node 0 link 0: mmio [fbe00000, ffefffff] bus: [00, 07] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0x000a0000-0x000bffff] bus: 00 index 2 [mem 0x80000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 3 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources ACPI Warning: Incorrect checksum in table [OEMB] - 0x4D, should be 0x44 (20100428/tbutils-314) ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] pci_root PNP0A03:00: host bridge window [mem 0x70000000-0xdfffffff] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] pci_bus 0000:00: scanning bus pci 0000:00:00.0: found [1022:9600] class 000600 header type 00 pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:01.0: found [1043:9602] class 000604 header type 01 pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:06.0: found [1022:9606] class 000604 header type 01 pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:11.0: found [1002:4390] class 000101 header type 00 pci 0000:00:11.0: calling quirk_no_ata_d3+0x0/0x16 pci 0000:00:11.0: reg 10: [io 0xb000-0xb007] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f] pci 0000:00:11.0: reg 24: [mem 0xfbbffc00-0xfbbfffff] pci 0000:00:11.0: calling quirk_amd_ide_mode+0x0/0xdf pci 0000:00:11.0: set SATA to AHCI mode pci 0000:00:11.0: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:12.0: found [1002:4397] class 000c03 header type 00 pci 0000:00:12.0: calling quirk_no_ata_d3+0x0/0x16 pci 0000:00:12.0: reg 10: [mem 0xfbbfd000-0xfbbfdfff] pci 0000:00:12.0: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:12.1: found [1002:4398] class 000c03 header type 00 pci 0000:00:12.1: calling quirk_no_ata_d3+0x0/0x16 pci 0000:00:12.1: reg 10: [mem 0xfbbfe000-0xfbbfefff] pci 0000:00:12.1: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:12.2: found [1002:4396] class 000c03 header type 00 pci 0000:00:12.2: calling quirk_no_ata_d3+0x0/0x16 pci 0000:00:12.2: reg 10: [mem 0xfbbff800-0xfbbff8ff] pci 0000:00:12.2: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: found [1002:4397] class 000c03 header type 00 pci 0000:00:13.0: calling quirk_no_ata_d3+0x0/0x16 pci 0000:00:13.0: reg 10: [mem 0xfbbfb000-0xfbbfbfff] pci 0000:00:13.0: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:13.1: found [1002:4398] class 000c03 header type 00 pci 0000:00:13.1: calling quirk_no_ata_d3+0x0/0x16 pci 0000:00:13.1: reg 10: [mem 0xfbbfc000-0xfbbfcfff] pci 0000:00:13.1: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:13.2: found [1002:4396] class 000c03 header type 00 pci 0000:00:13.2: calling quirk_no_ata_d3+0x0/0x16 pci 0000:00:13.2: reg 10: [mem 0xfbbff400-0xfbbff4ff] pci 0000:00:13.2: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.0: found [1002:4385] class 000c05 header type 00 pci 0000:00:14.0: calling quirk_no_ata_d3+0x0/0x16 pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x4f pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0xf pci 0000:00:14.0: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:14.1: found [1002:439c] class 000101 header type 00 pci 0000:00:14.1: calling quirk_no_ata_d3+0x0/0x16 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] pci 0000:00:14.1: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:14.3: found [1002:439d] class 000601 header type 00 pci 0000:00:14.3: calling quirk_no_ata_d3+0x0/0x16 pci 0000:00:14.3: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:14.4: found [1002:4384] class 000604 header type 01 pci 0000:00:14.4: calling quirk_no_ata_d3+0x0/0x16 pci 0000:00:14.4: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:14.5: found [1002:4399] class 000c03 header type 00 pci 0000:00:14.5: calling quirk_no_ata_d3+0x0/0x16 pci 0000:00:14.5: reg 10: [mem 0xfbbfa000-0xfbbfafff] pci 0000:00:14.5: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:18.0: found [1022:1100] class 000600 header type 00 pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:18.1: found [1022:1101] class 000600 header type 00 pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:18.2: found [1022:1102] class 000600 header type 00 pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x1be pci 0000:00:18.3: found [1022:1103] class 000600 header type 00 pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x1be pci_bus 0000:00: fixups for bus pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 0 pci_bus 0000:01: scanning bus pci 0000:01:05.0: found [1002:9610] class 000300 header type 00 pci 0000:01:05.0: calling quirk_no_ata_d3+0x0/0x16 pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref] pci 0000:01:05.0: reg 14: [io 0xc000-0xc0ff] pci 0000:01:05.0: reg 18: [mem 0xfbde0000-0xfbdeffff] pci 0000:01:05.0: reg 24: [mem 0xfbc00000-0xfbcfffff] pci 0000:01:05.0: calling quirk_resource_alignment+0x0/0x1be pci 0000:01:05.0: supports D1 D2 pci 0000:01:05.1: found [1002:960f] class 000403 header type 00 pci 0000:01:05.1: calling quirk_no_ata_d3+0x0/0x16 pci 0000:01:05.1: reg 10: [mem 0xfbdfc000-0xfbdfffff] pci 0000:01:05.1: calling quirk_resource_alignment+0x0/0x1be pci 0000:01:05.1: supports D1 D2 pci_bus 0000:01: fixups for bus pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] pci 0000:00:01.0: bridge window [mem 0xfbc00000-0xfbdfffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:01: bus scan returning with max=01 pci 0000:00:06.0: scanning [bus 02-02] behind bridge, pass 0 pci_bus 0000:02: scanning bus pci 0000:02:00.0: found [1969:1026] class 000200 header type 00 pci 0000:02:00.0: reg 10: [mem 0xfbec0000-0xfbefffff 64bit] pci 0000:02:00.0: reg 18: [io 0xdc00-0xdc7f] pci 0000:02:00.0: calling quirk_resource_alignment+0x0/0x1be pci 0000:02:00.0: PME# supported from D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci_bus 0000:02: fixups for bus pci 0000:00:06.0: PCI bridge to [bus 02-02] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci_bus 0000:02: bus scan returning with max=02 pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 0 pci_bus 0000:03: scanning bus pci 0000:03:05.0: found [168c:0013] class 000200 header type 00 pci 0000:03:05.0: reg 10: [mem 0xfbff0000-0xfbffffff] pci 0000:03:05.0: calling quirk_resource_alignment+0x0/0x1be pci 0000:03:06.0: found [1131:7133] class 000480 header type 00 pci 0000:03:06.0: reg 10: [mem 0xfbfef800-0xfbfeffff] pci 0000:03:06.0: calling quirk_resource_alignment+0x0/0x1be pci 0000:03:06.0: supports D1 D2 pci 0000:03:07.0: found [1102:0004] class 000401 header type 00 pci 0000:03:07.0: reg 10: [io 0xe880-0xe89f] pci 0000:03:07.0: calling quirk_resource_alignment+0x0/0x1be pci 0000:03:07.0: supports D1 D2 pci 0000:03:07.1: found [1102:7003] class 000980 header type 00 pci 0000:03:07.1: reg 10: [io 0xec00-0xec07] pci 0000:03:07.1: calling quirk_resource_alignment+0x0/0x1be pci 0000:03:07.1: supports D1 D2 pci 0000:03:07.2: found [1102:4001] class 000c00 header type 00 pci 0000:03:07.2: reg 10: [mem 0xfbfef000-0xfbfef7ff] pci 0000:03:07.2: reg 14: [mem 0xfbfe8000-0xfbfebfff] pci 0000:03:07.2: calling quirk_resource_alignment+0x0/0x1be pci 0000:03:07.2: supports D1 D2 pci 0000:03:07.2: PME# supported from D0 D1 D2 D3hot pci 0000:03:07.2: PME# disabled pci_bus 0000:03: fixups for bus pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xe000-0xefff] pci 0000:00:14.4: bridge window [mem 0xfbf00000-0xfbffffff] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x70000000-0xdfffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) pci_bus 0000:03: bus scan returning with max=03 pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 1 pci 0000:00:06.0: scanning [bus 02-02] behind bridge, pass 1 pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 1 pci_bus 0000:00: bus scan returning with max=03 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15) vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.23. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:11.0: BAR 0: reserving [io 0xb000-0xb007 flags 0x40101] (d=0, p=0) pci 0000:00:11.0: BAR 1: reserving [io 0xa000-0xa003 flags 0x40101] (d=0, p=0) pci 0000:00:11.0: BAR 2: reserving [io 0x9000-0x9007 flags 0x40101] (d=0, p=0) pci 0000:00:11.0: BAR 3: reserving [io 0x8000-0x8003 flags 0x40101] (d=0, p=0) pci 0000:00:11.0: BAR 4: reserving [io 0x7000-0x700f flags 0x40101] (d=0, p=0) pci 0000:00:11.0: BAR 5: reserving [mem 0xfbbffc00-0xfbbfffff flags 0x40200] (d=0, p=0) pci 0000:00:12.0: BAR 0: reserving [mem 0xfbbfd000-0xfbbfdfff flags 0x40200] (d=0, p=0) pci 0000:00:12.1: BAR 0: reserving [mem 0xfbbfe000-0xfbbfefff flags 0x40200] (d=0, p=0) pci 0000:00:12.2: BAR 0: reserving [mem 0xfbbff800-0xfbbff8ff flags 0x40200] (d=0, p=0) pci 0000:00:13.0: BAR 0: reserving [mem 0xfbbfb000-0xfbbfbfff flags 0x40200] (d=0, p=0) pci 0000:00:13.1: BAR 0: reserving [mem 0xfbbfc000-0xfbbfcfff flags 0x40200] (d=0, p=0) pci 0000:00:13.2: BAR 0: reserving [mem 0xfbbff400-0xfbbff4ff flags 0x40200] (d=0, p=0) pci 0000:00:14.1: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0) pci 0000:00:14.1: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0) pci 0000:00:14.1: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0) pci 0000:00:14.1: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0) pci 0000:00:14.1: BAR 4: reserving [io 0xff00-0xff0f flags 0x40101] (d=0, p=0) pci 0000:00:14.5: BAR 0: reserving [mem 0xfbbfa000-0xfbbfafff flags 0x40200] (d=0, p=0) pci 0000:01:05.0: BAR 0: reserving [mem 0xd0000000-0xdfffffff flags 0x42208] (d=0, p=0) pci 0000:01:05.0: BAR 1: reserving [io 0xc000-0xc0ff flags 0x40101] (d=0, p=0) pci 0000:01:05.0: BAR 2: reserving [mem 0xfbde0000-0xfbdeffff flags 0x40200] (d=0, p=0) pci 0000:01:05.0: BAR 5: reserving [mem 0xfbc00000-0xfbcfffff flags 0x40200] (d=0, p=0) pci 0000:01:05.1: BAR 0: reserving [mem 0xfbdfc000-0xfbdfffff flags 0x40200] (d=0, p=0) pci 0000:02:00.0: BAR 0: reserving [mem 0xfbec0000-0xfbefffff flags 0x140204] (d=0, p=0) pci 0000:02:00.0: BAR 2: reserving [io 0xdc00-0xdc7f flags 0x40101] (d=0, p=0) pci 0000:03:05.0: BAR 0: reserving [mem 0xfbff0000-0xfbffffff flags 0x40200] (d=0, p=0) pci 0000:03:06.0: BAR 0: reserving [mem 0xfbfef800-0xfbfeffff flags 0x40200] (d=0, p=0) pci 0000:03:07.0: BAR 0: reserving [io 0xe880-0xe89f flags 0x40101] (d=0, p=0) pci 0000:03:07.1: BAR 0: reserving [io 0xec00-0xec07 flags 0x40101] (d=0, p=0) pci 0000:03:07.2: BAR 0: reserving [mem 0xfbfef000-0xfbfef7ff flags 0x40200] (d=0, p=0) pci 0000:03:07.2: BAR 1: reserving [mem 0xfbfe8000-0xfbfebfff flags 0x40200] (d=0, p=0) reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000006ff90000 - 000000006fffffff Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized cfg80211: Calling CRDA to update world regulatory domain hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:01: [mem 0x70000000-0x7fffffff] has been reserved system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved system 00:08: [io 0x04d0-0x04d1] has been reserved system 00:08: [io 0x040b] has been reserved system 00:08: [io 0x04d6] has been reserved system 00:08: [io 0x0c00-0x0c01] has been reserved system 00:08: [io 0x0c14] has been reserved system 00:08: [io 0x0c50-0x0c51] has been reserved system 00:08: [io 0x0c52] has been reserved system 00:08: [io 0x0c6c] has been reserved system 00:08: [io 0x0c6f] has been reserved system 00:08: [io 0x0cd0-0x0cd1] has been reserved system 00:08: [io 0x0cd2-0x0cd3] has been reserved system 00:08: [io 0x0cd4-0x0cd5] has been reserved system 00:08: [io 0x0cd6-0x0cd7] has been reserved system 00:08: [io 0x0cd8-0x0cdf] has been reserved system 00:08: [io 0x0800-0x089f] has been reserved system 00:08: [io 0x0b00-0x0b3f] has been reserved system 00:08: [io 0x0b00-0x0b0f] has been reserved system 00:08: [io 0x0b20-0x0b3f] has been reserved system 00:08: [io 0x0900-0x090f] has been reserved system 00:08: [io 0x0910-0x091f] has been reserved system 00:08: [io 0xfe00-0xfefe] has been reserved system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved system 00:0b: [io 0x0230-0x023f] has been reserved system 00:0b: [io 0x0290-0x029f] has been reserved system 00:0b: [io 0x0f40-0x0f4f] has been reserved system 00:0b: [io 0x0a30-0x0a3f] has been reserved system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0d: [mem 0x00100000-0x6fffffff] could not be reserved system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] pci 0000:00:01.0: bridge window [mem 0xfbc00000-0xfbdfffff] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:06.0: PCI bridge to [bus 02-02] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff] pci 0000:00:06.0: bridge window [mem pref disabled] pci 0000:00:14.4: PCI bridge to [bus 03-03] pci 0000:00:14.4: bridge window [io 0xe000-0xefff] pci 0000:00:14.4: bridge window [mem 0xfbf00000-0xfbffffff] pci 0000:00:14.4: bridge window [mem pref disabled] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:06.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0x70000000-0xdfffffff] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] pci_bus 0000:01: resource 1 [mem 0xfbc00000-0xfbdfffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:03: resource 8 [mem 0x70000000-0xdfffffff] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:00.0: calling pci_fixup_video+0x0/0xbe pci 0000:00:01.0: calling quirk_disable_msi+0x0/0x53 pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:01.0: calling pci_fixup_video+0x0/0xbe pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:06.0: calling pci_fixup_video+0x0/0xbe pci 0000:00:11.0: calling quirk_msi_intx_disable_ati_bug+0x0/0x38 pci 0000:00:11.0: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:11.0: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:11.0: calling pci_fixup_video+0x0/0xbe pci 0000:00:12.0: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:12.0: calling pci_fixup_video+0x0/0xbe pci 0000:00:12.1: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:12.1: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:12.1: calling pci_fixup_video+0x0/0xbe pci 0000:00:12.2: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:12.2: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:12.2: calling pci_fixup_video+0x0/0xbe pci 0000:00:13.0: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:13.0: calling pci_fixup_video+0x0/0xbe pci 0000:00:13.1: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:13.1: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:13.1: calling pci_fixup_video+0x0/0xbe pci 0000:00:13.2: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:13.2: calling pci_fixup_video+0x0/0xbe pci 0000:00:14.0: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:14.0: calling pci_fixup_video+0x0/0xbe pci 0000:00:14.1: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:14.1: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:14.1: calling pci_fixup_video+0x0/0xbe pci 0000:00:14.3: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:14.3: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:14.3: calling pci_fixup_video+0x0/0xbe pci 0000:00:14.4: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:14.4: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:14.4: calling pci_fixup_video+0x0/0xbe pci 0000:00:14.5: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:14.5: calling pci_fixup_video+0x0/0xbe pci 0000:00:18.0: calling quirk_amd_nb_node+0x0/0x62 pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:18.0: calling pci_fixup_video+0x0/0xbe pci 0000:00:18.1: calling quirk_amd_nb_node+0x0/0x62 pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:18.1: calling pci_fixup_video+0x0/0xbe pci 0000:00:18.2: calling quirk_amd_nb_node+0x0/0x62 pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:18.2: calling pci_fixup_video+0x0/0xbe pci 0000:00:18.3: calling quirk_amd_nb_node+0x0/0x62 pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:00:18.3: calling pci_fixup_video+0x0/0xbe pci 0000:01:05.0: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:01:05.0: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:01:05.0: calling pci_fixup_video+0x0/0xbe pci 0000:01:05.0: Boot video device pci 0000:01:05.1: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:01:05.1: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:01:05.1: calling pci_fixup_video+0x0/0xbe pci 0000:02:00.0: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:02:00.0: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:02:00.0: calling pci_fixup_video+0x0/0xbe pci 0000:03:05.0: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:03:05.0: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:03:05.0: calling pci_fixup_video+0x0/0xbe pci 0000:03:06.0: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:03:06.0: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:03:06.0: calling pci_fixup_video+0x0/0xbe pci 0000:03:07.0: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:03:07.0: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:03:07.0: calling pci_fixup_video+0x0/0xbe pci 0000:03:07.1: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:03:07.1: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:03:07.1: calling pci_fixup_video+0x0/0xbe pci 0000:03:07.2: calling quirk_cardbus_legacy+0x0/0x24 pci 0000:03:07.2: calling quirk_usb_early_handoff+0x0/0x5ae pci 0000:03:07.2: calling pci_fixup_video+0x0/0xbe PCI: CLS 64 bytes, default 64 HugeTLB registered 2 MB page size, pre-allocated 0 pages Slow work thread pool: Starting up Slow work thread pool: Ready NTFS driver 2.1.29 [Flags: R/O]. fuse init (API version 7.14) msgmni has been set to 3510 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:06.0: setting latency timer to 64 pcieport 0000:00:06.0: irq 40 for MSI/MSI-X pci-stub: invalid id string "" vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010a00000, using 6144k, total 16384k vesafb: mode is 1024x768x32, linelength=4096, pages=4 vesafb: scrolling: redraw vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle Real Time Clock Driver v1.12b Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 brd: module loaded loop: module loaded ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22 ata2: SATA max UDMA/133 irq 22, connection status changed ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed ata4: SATA max UDMA/133 abar m1024@0xfbbffc00 port 0xfbbffe80 irq 22 pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_atiixp 0000:00:14.1: setting latency timer to 64 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky usbcore: registered new interface driver asix usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus console [netcon0] enabled netconsole: network logging started ohci1394 0000:03:07.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[fbfef000-fbfef7ff] Max Packet=[2048] IR/IT contexts=[4/8] video1394: Installed video1394 module ieee1394: raw1394: /dev/raw1394 device initialized ata5.00: ATA-8: WDC WD5000AAKB-00H8A0, 05.04E05, max UDMA/133 ata5.00: 976773168 sectors, multi 16: LBA48 ata5.01: ATA-7: ST3400620A, 3.AAF, max UDMA/100 ata5.01: 781422768 sectors, multi 16: LBA48 ata5.00: configured for UDMA/100 ata5.01: configured for UDMA/100 eth1394: eth0: IPv4 over IEEE 1394 (fw-host0) ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: enabling bus mastering ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: enabling Mem-Wr-Inval ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbbff800 ata4: SATA link down (SStatus 0 SControl 300) ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.35-rc3-git3 ehci_hcd usb usb1: SerialNumber: 0000:00:12.2 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: enabling bus mastering ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: enabling Mem-Wr-Inval ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbbff400 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.35-rc3-git3 ehci_hcd usb usb2: SerialNumber: 0000:00:13.2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usbcore: registered new interface driver libusual usbcore: registered new interface driver mdc800 mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera usbcore: registered new interface driver microtekX6 usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 i2c /dev entries driver ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [mem 0x00000b00-0x00000b0f pref] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0) md: raid0 personality registered for level 0 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com Bluetooth: Virtual HCI driver ver 1.3 Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized Bluetooth: Broadcom Blutonium firmware driver ver 1.2 usbcore: registered new interface driver bcm203x Bluetooth: Digianswer Bluetooth USB driver ver 0.10 usbcore: registered new interface driver bpa10x Bluetooth: BlueFRITZ! USB driver ver 1.2 usbcore: registered new interface driver bfusb cpuidle: using governor ladder usbcore: registered new interface driver usbhid usbhid: USB HID core driver EMU10K1_Audigy 0000:03:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ata3: softreset failed (device not ready) ALSA device list: #0: Audigy 1 [Unknown] (rev.3, serial:0x5a1102) at 0xe880, irq 22 oprofile: using NMI interrupt. ata3: applying SB600 PMP SRST workaround and retrying TCP cubic registered usb 1-2: new high speed USB device using ehci_hcd and address 3 ata1: softreset failed (device not ready) ata1: applying SB600 PMP SRST workaround and retrying ata2: softreset failed (device not ready) ata2: applying SB600 PMP SRST workaround and retrying ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c008100725d] NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 usb 1-2: New USB device found, idVendor=04b8, idProduct=011e usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2: Product: EPSON Scanner usb 1-2: Manufacturer: EPSON Bluetooth: SCO socket layer initialized ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: Optiarc DVD RW AD-7241S, 1.02, max UDMA/100 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.2 ata1.00: ATA-6: WDC WD800JD-22JNA0, 05.01C05, max UDMA/133 ata1.00: 156301488 sectors, multi 16: LBA powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ (2 cpu cores) (version 2.20.00) ata3.00: ATA-6: WDC WD800JD-23JNA1, 06.01C06, max UDMA/133 powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0xa powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xc powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xe powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x10 powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10 powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12 ata3.00: 156312576 sectors, multi 16: LBA ata1.00: configured for UDMA/133 ata2.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-22JN 05.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: Clocksource tsc unstable (delta = -272577914 ns) sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk ata3.00: configured for UDMA/133 scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.02 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 scsi 2:0:0:0: Direct-Access ATA WDC WD800JD-23JN 06.0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdb] 156312576 512-byte logical blocks: (80.0 GB/74.5 GiB) scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKB-0 05.0 PQ: 0 ANSI: 5 sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 4:0:0:0: [sdc] Write Protect is off sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: scsi 4:0:1:0: Direct-Access ATA ST3400620A 3.AA PQ: 0 ANSI: 5 sdc1 sd 4:0:1:0: [sdd] 781422768 512-byte logical blocks: (400 GB/372 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sd 4:0:1:0: [sdd] Write Protect is off sd 2:0:0:0: [sdb] Attached SCSI disk sd 4:0:0:0: [sdc] Attached SCSI disk sd 4:0:1:0: [sdd] Mode Sense: 00 3a 00 00 sd 4:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 sd 4:0:1:0: [sdd] Attached SCSI disk md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240) EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240) EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:2. Freeing unused kernel memory: 676k freed udev: starting version 158 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: enabling bus mastering ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbbfd000 ATL1E 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ATL1E 0000:02:00.0: setting latency timer to 64 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.35-rc3-git3 ohci_hcd usb usb3: SerialNumber: 0000:00:12.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbbfe000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.35-rc3-git3 ohci_hcd usb usb4: SerialNumber: 0000:00:12.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: enabling bus mastering ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbbfb000 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.35-rc3-git3 ohci_hcd usb usb5: SerialNumber: 0000:00:13.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbbfc000 ath5k 0000:03:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ath5k 0000:03:05.0: registered as 'phy0' usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.35-rc3-git3 ohci_hcd usb usb6: SerialNumber: 0000:00:13.1 hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: enabling bus mastering ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbbfa000 ath: EEPROM regdomain: 0x0 ath: EEPROM indicates default country code should be used ath: doing EEPROM country->regdmn map search ath: country maps to regdmn code: 0x3a ath: Country alpha2 being used: US ath: Regpair used: 0x3a phy0: Selected rate control algorithm 'minstrel' ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45) cfg80211: Calling CRDA for country: US usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: OHCI Host Controller usb usb7: Manufacturer: Linux 2.6.35-rc3-git3 ohci_hcd usb usb7: SerialNumber: 0000:00:14.5 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 3-1: new full speed USB device using ohci_hcd and address 2 usb 3-1: New USB device found, idVendor=046d, idProduct=08da usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 2:2:1: endpoint lacks sample rate attribute bit, cannot set. usbcore: registered new interface driver snd-usb-audio usb 3-3: new low speed USB device using ohci_hcd and address 3 usb 3-3: New USB device found, idVendor=046d, idProduct=c312 usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-3: Product: USB Multimedia Keyboard usb 3-3: Manufacturer: LITEON Technology input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input2 generic-usb 0003:046D:C312.0001: input: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:12.0-3/input0 usb 4-1: new low speed USB device using ohci_hcd and address 2 usb 4-1: New USB device found, idVendor=046d, idProduct=c501 usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: USB Receiver usb 4-1: Manufacturer: Logitech input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input3 generic-usb 0003:046D:C501.0002: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.1-1/input0 usb 5-1: new full speed USB device using ohci_hcd and address 2 usb 5-1: device descriptor read/64, error -62 usb 5-1: device descriptor read/64, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 3 EXT4-fs (sda2): re-mounted. Opts: (null) usb 5-1: device descriptor read/64, error -62 EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) usb 5-1: device descriptor read/64, error -62 EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sdc1): using internal journal EXT3-fs (sdc1): mounted filesystem with writeback data mode EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sdd1): using internal journal EXT3-fs (sdd1): mounted filesystem with writeback data mode usb 5-1: new full speed USB device using ohci_hcd and address 4 usb 5-1: device not accepting address 4, error -62 usb 5-1: new full speed USB device using ohci_hcd and address 5 usb 5-1: device not accepting address 5, error -62 hub 5-0:1.0: unable to enumerate USB device on port 1 Adding 5004212k swap on /dev/sdb1. Priority:-1 extents:1 across:5004212k ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with 00:02:cf:6a:cc:80 (try 1) wlan0: authenticated wlan0: associate with 00:02:cf:6a:cc:80 (try 1) wlan0: RX AssocResp from 00:02:cf:6a:cc:80 (capab=0x461 status=0 aid=9) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. pci 0000:01:05.0: setting latency timer to 64 [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0 [drm] Setting GART location based on new memory map [drm] Loading RS780 CP Microcode [drm] Resetting GPU [drm] writeback test succeeded in 1 usecs wlan0: no IPv6 routers present X:1272 conflicting memory types d0000000-e0000000 uncached-minus<->write-combining reserve_memtype failed 0xd0000000-0xe0000000, track uncached-minus, req uncached-minus [drm] Resetting GPU X:1272 freeing invalid memtype d0000000-e0000000