dmesg before suspend to disk

dmesg.txt (text/plain), 22.43 KB, created by Petr Lanc on 2009-02-02 09:24:38 UTC

Linux version 2.6.27-gentoo-r8 (root@shana) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #1 Fri Jan 30 22:30:33 CET 2009
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000002ff60000 (usable)
 BIOS-e820: 000000002ff60000 - 000000002ff78000 (ACPI data)
 BIOS-e820: 000000002ff78000 - 000000002ff7a000 (ACPI NVS)
 BIOS-e820: 000000002ff80000 - 0000000030000000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x2ff60 max_arch_pfn = 0x100000
kernel direct mapping tables up to 2ff60000 @ 7000-d000
RAMDISK: 2fd93000 - 2ff4f08d
ACPI: RSDP 000F6D40, 0024 (r2 IBM   )
ACPI: XSDT 2FF6E23A, 004C (r1 IBM    TP-1P        1140  LTP        0)
ACPI: FACP 2FF6E300, 00F4 (r3 IBM    TP-1P        1140 IBM         1)
ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080609]
ACPI: DSDT 2FF6E4E7, 9968 (r1 IBM    TP-1P        1140 MSFT  100000E)
ACPI: FACS 2FF79000, 0040
ACPI: SSDT 2FF6E4B4, 0033 (r1 IBM    TP-1P        1140 MSFT  100000E)
ACPI: ECDT 2FF77E4F, 0052 (r1 IBM    TP-1P        1140 IBM         1)
ACPI: TCPA 2FF77EA1, 0032 (r1 IBM    TP-1P        1140 PTL         1)
ACPI: BOOT 2FF77FD8, 0028 (r1 IBM    TP-1P        1140  LTP        1)
0MB HIGHMEM available.
767MB LOWMEM available.
  mapped low ram: 0 - 2ff60000
  low ram: 00000000 - 2ff60000
  bootmap 00001000 - 00006fec
(7 early reservations) ==> bootmem [0000000000 - 002ff60000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000100000 - 00004d0580]    TEXT DATA BSS ==> [0000100000 - 00004d0580]
  #2 [002fd93000 - 002ff4f08d]          RAMDISK ==> [002fd93000 - 002ff4f08d]
  #3 [00004d1000 - 00004d4000]    INIT_PG_TABLE ==> [00004d1000 - 00004d4000]
  #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
  #5 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
  #6 [0000001000 - 0000007000]          BOOTMAP ==> [0000001000 - 0000007000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x0002ff60
  HighMem  0x0002ff60 -> 0x0002ff60
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0002ff60
On node 0 totalpages: 196351
free_area_init_node: node 0, pgdat c0419b80, node_mem_map c1000000
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 190849 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (01603000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 30000000:cf800000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 194816
Kernel command line: dolvm root=/dev/ram0 crypt_root=/dev/hda3 real_root=/dev/vg0/root crypt_swap=/dev/hda2 swap_keydev=/dev/vg0/root swap_key=swap.key real_resume=/dev/mapper/swap
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 1298.891 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 772364k/785792k available (2055k kernel code, 12808k reserved, 1149k data, 236k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffac000 - 0xfffff000   ( 332 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf0800000 - 0xff7fe000   ( 239 MB)
    lowmem  : 0xc0000000 - 0xeff60000   ( 767 MB)
      .init : 0xc0424000 - 0xc045f000   ( 236 kB)
      .data : 0xc0301df7 - 0xc0421220   (1149 kB)
      .text : 0xc0100000 - 0xc0301df7   (2055 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay loop (skipped), value calculated using timer frequency.. 2597.78 BogoMIPS (lpj=5195564)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1300MHz stepping 05
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20080609
ACPI: setting ELCR to 0200 (from 0800)
net_namespace: 588 bytes
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd936, last bus=5
PCI: Using configuration type 1 for base access
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:00.0 reg 10 32bit mmio: [d0000000, dfffffff]
PCI: 0000:00:1d.0 reg 20 io port: [1800, 181f]
PCI: 0000:00:1d.1 reg 20 io port: [1820, 183f]
PCI: 0000:00:1d.2 reg 20 io port: [1840, 185f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [c0000000, c00003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
PCI: 0000:00:1f.1 reg 20 io port: [1860, 186f]
PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff]
PCI: 0000:00:1f.3 reg 20 io port: [1880, 189f]
PCI: 0000:00:1f.5 reg 10 io port: [1c00, 1cff]
PCI: 0000:00:1f.5 reg 14 io port: [18c0, 18ff]
PCI: 0000:00:1f.5 reg 18 32bit mmio: [c0000c00, c0000dff]
PCI: 0000:00:1f.5 reg 1c 32bit mmio: [c0000800, c00008ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
PCI: 0000:00:1f.6 reg 10 io port: [2400, 24ff]
PCI: 0000:00:1f.6 reg 14 io port: [2000, 207f]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: PME# disabled
PCI: 0000:01:00.0 reg 10 32bit mmio: [e0000000, e7ffffff]
PCI: 0000:01:00.0 reg 14 io port: [3000, 30ff]
PCI: 0000:01:00.0 reg 18 32bit mmio: [c0100000, c010ffff]
PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: bridge 0000:00:01.0 io port: [3000, 3fff]
PCI: bridge 0000:00:01.0 32bit mmio: [c0100000, c01fffff]
PCI: bridge 0000:00:01.0 32bit mmio pref: [e0000000, e7ffffff]
PCI: 0000:02:00.0 reg 10 32bit mmio: [0, fff]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: supports D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
PCI: 0000:02:02.0 reg 10 32bit mmio: [c0204000, c0204fff]
PCI: 0000:02:07.0 reg 10 32bit mmio: [c0206000, c02067ff]
PCI: 0000:02:07.0 reg 14 32bit mmio: [c0200000, c0203fff]
pci 0000:02:07.0: supports D1
pci 0000:02:07.0: supports D2
pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:07.0: PME# disabled
PCI: 0000:02:08.0 reg 10 32bit mmio: [c0205000, c0205fff]
PCI: 0000:02:08.0 reg 14 io port: [8000, 803f]
pci 0000:02:08.0: supports D1
pci 0000:02:08.0: supports D2
pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:08.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 io port: [4000, 8fff]
PCI: bridge 0000:00:1e.0 32bit mmio: [c0200000, cfffffff]
PCI: bridge 0000:00:1e.0 32bit mmio pref: [e8000000, efffffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: Power Resource [PUBS] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
ACPI: RTC can wake from S4
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
system 00:00: iomem range 0xcc000-0xcffff could not be reserved
system 00:00: iomem range 0xdc000-0xdffff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x2fffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x1600-0x167f has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x3000-0x3fff
pci 0000:00:01.0:   MEM window: 0xc0100000-0xc01fffff
pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000e7ffffff
pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:00.0:   IO window: 0x004000-0x0040ff
pci 0000:02:00.0:   IO window: 0x004400-0x0044ff
pci 0000:02:00.0:   PREFETCH window: 0xe8000000-0xebffffff
pci 0000:02:00.0:   MEM window: 0xc4000000-0xc7ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0:   IO window: 0x4000-0x8fff
pci 0000:00:1e.0:   MEM window: 0xc0200000-0xcfffffff
pci 0000:00:1e.0:   PREFETCH window: 0x000000e8000000-0x000000efffffff
pci 0000:00:1e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 io port: [3000, 3fff]
bus: 01 index 1 mmio: [c0100000, c01fffff]
bus: 01 index 2 mmio: [e0000000, e7ffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [4000, 8fff]
bus: 02 index 1 mmio: [c0200000, cfffffff]
bus: 02 index 2 mmio: [e8000000, efffffff]
bus: 02 index 3 io port: [0, ffff]
bus: 02 index 4 mmio: [0, ffffffff]
bus: 03 index 0 io port: [4000, 40ff]
bus: 03 index 1 io port: [4400, 44ff]
bus: 03 index 2 mmio: [e8000000, ebffffff]
bus: 03 index 3 mmio: [c4000000, c7ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 1776k freed
Simple Boot Flag at 0x35 set to 0x1
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <[e-mail]>
HugeTLB registered 4 MB page size, pre-allocated 0 pages
Installing knfsd (copyright (C) 1996 [e-mail]).
msgmni has been set to 1512
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci 0000:01:00.0: Boot video device
pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
Non-volatile memory driver v1.2
intel_rng: FWH not detected
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SLPB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
Marking TSC unstable due to possible TSC halt in C2
ACPI: Thermal Zone [THM0] (38 C)
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
serial 00:0a: activated
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
serial 0000:00:1f.6: PCI INT B disabled
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
thinkpad_acpi: ThinkPad ACPI Extras v0.21
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 1PET46WW (1.14 ), EC unknown
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi:orange:batt
Registered led device: tpacpi:green:batt
Registered led device: tpacpi::dock_active
Registered led device: tpacpi::bay_active
Registered led device: tpacpi::dock_batt
Registered led device: tpacpi::unknown_led
Registered led device: tpacpi::standby
thinkpad_acpi: CMOS NVRAM (4) and EC (5) do not agree on display brightness level
input: ThinkPad Extra Buttons as /class/input/input3
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
e100 0000:02:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xc0205000, irq 11, MAC addr 00:06:1b:cf:22:1e
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x01)
pci 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
pci 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1860-0x1867
    ide1: BM-DMA at 0x1868-0x186f
Probing IDE interface ide0...
hda: IC25N040ATMR04-0, ATA DISK drive
Clocksource tsc unstable (delta = -447795940 ns)
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4240N, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide_generic: I/O resource 0x1F0-0x1F7 not free.
ide_generic: I/O resource 0x170-0x177 not free.
hda: max request size: 128KiB
hda: Host Protected Area detected.
	current capacity is 72291317 sectors (37013 MB)
	native  capacity is 78140160 sectors (40007 MB)
hda: Host Protected Area disabled.
hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHS=65535/16/63
hda: cache flushes supported
 hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [e-mail]
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input4
rtc_cmos 00:06: setting system clock to 2009-02-02 09:08:31 UTC (1233565711)
Freeing unused kernel memory: 236k freed
Driver 'sd' needs updating - please use bus_type methods
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
input: SynPS/2 Synaptics TouchPad as /class/input/input5
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
ohci1394 0000:02:07.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[c0206000-c02067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00061b0020108d5d]
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input6
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
PM: Starting manual resume from disk
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 855PM Chipset
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP(,...)]
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[e-mail]>
i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:00.0 [1014:0528]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.0, mfunc 0x01d11002, devctl 0x64
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
Yenta: ISA IRQ mask 0x0438, PCI irq 11
Socket status: 30000007
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
ipw2100 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
firmware: requesting ipw2100-1.3.fw
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
Intel ICH 0000:00:1f.5: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 55413 usecs
intel8x0: clocking to 48000
EXT3 FS on dm-1, internal journal
loop: module loaded
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1004956k swap on /dev/mapper/swap.  Priority:-1 extents:1 across:1004956k
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (12288 buckets, 49152 max)
pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
fuse init (API version 7.9)
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.29.0 20080528 on minor 0
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
pci 0000:01:00.0: putting AGP V2 device into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R100 Microcode
[drm] writeback test succeeded in 1 usecs