Linux version 2.6.27-gentoo-r8 (root@shana) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #1 Fri Jan 30 22:30:33 CET 2009 PAT WC disabled due to known CPU erratum. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002ff60000 (usable) BIOS-e820: 000000002ff60000 - 000000002ff78000 (ACPI data) BIOS-e820: 000000002ff78000 - 000000002ff7a000 (ACPI NVS) BIOS-e820: 000000002ff80000 - 0000000030000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x2ff60 max_arch_pfn = 0x100000 kernel direct mapping tables up to 2ff60000 @ 7000-d000 RAMDISK: 2fd93000 - 2ff4f08d ACPI: RSDP 000F6D40, 0024 (r2 IBM ) ACPI: XSDT 2FF6E23A, 004C (r1 IBM TP-1P 1140 LTP 0) ACPI: FACP 2FF6E300, 00F4 (r3 IBM TP-1P 1140 IBM 1) ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080609] ACPI: DSDT 2FF6E4E7, 9968 (r1 IBM TP-1P 1140 MSFT 100000E) ACPI: FACS 2FF79000, 0040 ACPI: SSDT 2FF6E4B4, 0033 (r1 IBM TP-1P 1140 MSFT 100000E) ACPI: ECDT 2FF77E4F, 0052 (r1 IBM TP-1P 1140 IBM 1) ACPI: TCPA 2FF77EA1, 0032 (r1 IBM TP-1P 1140 PTL 1) ACPI: BOOT 2FF77FD8, 0028 (r1 IBM TP-1P 1140 LTP 1) 0MB HIGHMEM available. 767MB LOWMEM available. mapped low ram: 0 - 2ff60000 low ram: 00000000 - 2ff60000 bootmap 00001000 - 00006fec (7 early reservations) ==> bootmem [0000000000 - 002ff60000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000100000 - 00004d0580] TEXT DATA BSS ==> [0000100000 - 00004d0580] #2 [002fd93000 - 002ff4f08d] RAMDISK ==> [002fd93000 - 002ff4f08d] #3 [00004d1000 - 00004d4000] INIT_PG_TABLE ==> [00004d1000 - 00004d4000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #5 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #6 [0000001000 - 0000007000] BOOTMAP ==> [0000001000 - 0000007000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0002ff60 HighMem 0x0002ff60 -> 0x0002ff60 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0002ff60 On node 0 totalpages: 196351 free_area_init_node: node 0, pgdat c0419b80, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 190849 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffb000 (01603000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 30000000:cf800000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194816 Kernel command line: dolvm root=/dev/ram0 crypt_root=/dev/hda3 real_root=/dev/vg0/root crypt_swap=/dev/hda2 swap_keydev=/dev/vg0/root swap_key=swap.key real_resume=/dev/mapper/swap Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 1298.891 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 772364k/785792k available (2055k kernel code, 12808k reserved, 1149k data, 236k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffac000 - 0xfffff000 ( 332 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB) lowmem : 0xc0000000 - 0xeff60000 ( 767 MB) .init : 0xc0424000 - 0xc045f000 ( 236 kB) .data : 0xc0301df7 - 0xc0421220 (1149 kB) .text : 0xc0100000 - 0xc0301df7 (2055 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay loop (skipped), value calculated using timer frequency.. 2597.78 BogoMIPS (lpj=5195564) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1300MHz stepping 05 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20080609 ACPI: setting ELCR to 0200 (from 0800) net_namespace: 588 bytes NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd936, last bus=5 PCI: Using configuration type 1 for base access ACPI: EC: EC description table is found, configuring boot EC ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:00.0 reg 10 32bit mmio: [d0000000, dfffffff] PCI: 0000:00:1d.0 reg 20 io port: [1800, 181f] PCI: 0000:00:1d.1 reg 20 io port: [1820, 183f] PCI: 0000:00:1d.2 reg 20 io port: [1840, 185f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [c0000000, c00003ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO PCI: 0000:00:1f.1 reg 10 io port: [0, 7] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] PCI: 0000:00:1f.1 reg 20 io port: [1860, 186f] PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff] PCI: 0000:00:1f.3 reg 20 io port: [1880, 189f] PCI: 0000:00:1f.5 reg 10 io port: [1c00, 1cff] PCI: 0000:00:1f.5 reg 14 io port: [18c0, 18ff] PCI: 0000:00:1f.5 reg 18 32bit mmio: [c0000c00, c0000dff] PCI: 0000:00:1f.5 reg 1c 32bit mmio: [c0000800, c00008ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled PCI: 0000:00:1f.6 reg 10 io port: [2400, 24ff] PCI: 0000:00:1f.6 reg 14 io port: [2000, 207f] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold pci 0000:00:1f.6: PME# disabled PCI: 0000:01:00.0 reg 10 32bit mmio: [e0000000, e7ffffff] PCI: 0000:01:00.0 reg 14 io port: [3000, 30ff] PCI: 0000:01:00.0 reg 18 32bit mmio: [c0100000, c010ffff] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff] pci 0000:01:00.0: supports D1 pci 0000:01:00.0: supports D2 PCI: bridge 0000:00:01.0 io port: [3000, 3fff] PCI: bridge 0000:00:01.0 32bit mmio: [c0100000, c01fffff] PCI: bridge 0000:00:01.0 32bit mmio pref: [e0000000, e7ffffff] PCI: 0000:02:00.0 reg 10 32bit mmio: [0, fff] pci 0000:02:00.0: supports D1 pci 0000:02:00.0: supports D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled PCI: 0000:02:02.0 reg 10 32bit mmio: [c0204000, c0204fff] PCI: 0000:02:07.0 reg 10 32bit mmio: [c0206000, c02067ff] PCI: 0000:02:07.0 reg 14 32bit mmio: [c0200000, c0203fff] pci 0000:02:07.0: supports D1 pci 0000:02:07.0: supports D2 pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot pci 0000:02:07.0: PME# disabled PCI: 0000:02:08.0 reg 10 32bit mmio: [c0205000, c0205fff] PCI: 0000:02:08.0 reg 14 io port: [8000, 803f] pci 0000:02:08.0: supports D1 pci 0000:02:08.0: supports D2 pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:08.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [4000, 8fff] PCI: bridge 0000:00:1e.0 32bit mmio: [c0200000, cfffffff] PCI: bridge 0000:00:1e.0 32bit mmio pref: [e8000000, efffffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: Power Resource [PUBS] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing ACPI: RTC can wake from S4 system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff could not be reserved system 00:00: iomem range 0xc4000-0xc7fff could not be reserved system 00:00: iomem range 0xc8000-0xcbfff could not be reserved system 00:00: iomem range 0xcc000-0xcffff could not be reserved system 00:00: iomem range 0xdc000-0xdffff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x2fffffff could not be reserved system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11bf has been reserved system 00:02: ioport range 0x1600-0x167f has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x3000-0x3fff pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000e7ffffff pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:00.0: IO window: 0x004000-0x0040ff pci 0000:02:00.0: IO window: 0x004400-0x0044ff pci 0000:02:00.0: PREFETCH window: 0xe8000000-0xebffffff pci 0000:02:00.0: MEM window: 0xc4000000-0xc7ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0x4000-0x8fff pci 0000:00:1e.0: MEM window: 0xc0200000-0xcfffffff pci 0000:00:1e.0: PREFETCH window: 0x000000e8000000-0x000000efffffff pci 0000:00:1e.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:02:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffff] bus: 01 index 0 io port: [3000, 3fff] bus: 01 index 1 mmio: [c0100000, c01fffff] bus: 01 index 2 mmio: [e0000000, e7ffffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [4000, 8fff] bus: 02 index 1 mmio: [c0200000, cfffffff] bus: 02 index 2 mmio: [e8000000, efffffff] bus: 02 index 3 io port: [0, ffff] bus: 02 index 4 mmio: [0, ffffffff] bus: 03 index 0 io port: [4000, 40ff] bus: 03 index 1 io port: [4400, 44ff] bus: 03 index 2 mmio: [e8000000, ebffffff] bus: 03 index 3 mmio: [c4000000, c7ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 1776k freed Simple Boot Flag at 0x35 set to 0x1 Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14a HugeTLB registered 4 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 1512 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci 0000:01:00.0: Boot video device pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling Non-volatile memory driver v1.2 intel_rng: FWH not detected ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:00: registered as cooling_device0 ACPI: Processor [CPU] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 Marking TSC unstable due to possible TSC halt in C2 ACPI: Thermal Zone [THM0] (38 C) Serial: 8250/16550 driver4 ports, IRQ sharing disabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A serial 00:0a: activated 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 serial 0000:00:1f.6: PCI INT B disabled Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 thinkpad_acpi: ThinkPad ACPI Extras v0.21 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 1PET46WW (1.14 ), EC unknown Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi:orange:batt Registered led device: tpacpi:green:batt Registered led device: tpacpi::dock_active Registered led device: tpacpi::bay_active Registered led device: tpacpi::dock_batt Registered led device: tpacpi::unknown_led Registered led device: tpacpi::standby thinkpad_acpi: CMOS NVRAM (4) and EC (5) do not agree on display brightness level input: ThinkPad Extra Buttons as /class/input/input3 e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11 e100 0000:02:08.0: PME# disabled e100: eth0: e100_probe: addr 0xc0205000, irq 11, MAC addr 00:06:1b:cf:22:1e Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x01) pci 0000:00:1f.1: enabling device (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 pci 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867 ide1: BM-DMA at 0x1868-0x186f Probing IDE interface ide0... hda: IC25N040ATMR04-0, ATA DISK drive Clocksource tsc unstable (delta = -447795940 ns) hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected Probing IDE interface ide1... hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4240N, ATAPI CD/DVD-ROM drive hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide_generic: I/O resource 0x1F0-0x1F7 not free. ide_generic: I/O resource 0x170-0x177 not free. hda: max request size: 128KiB hda: Host Protected Area detected. current capacity is 72291317 sectors (37013 MB) native capacity is 78140160 sectors (40007 MB) hda: Host Protected Area disabled. hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHS=65535/16/63 hda: cache flushes supported hda: hda1 hda2 hda3 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. Using IPI Shortcut mode input: AT Translated Set 2 keyboard as /class/input/input4 rtc_cmos 00:06: setting system clock to 2009-02-02 09:08:31 UTC (1233565711) Freeing unused kernel memory: 236k freed Driver 'sd' needs updating - please use bus_type methods usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 serio: Synaptics pass-through port at isa0060/serio1/input0 uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected input: SynPS/2 Synaptics TouchPad as /class/input/input5 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver ohci1394 0000:02:07.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[c0206000-c02067ff] Max Packet=[2048] IR/IT contexts=[4/8] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b0020108d5d] IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input6 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. PM: Starting manual resume from disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 855PM Chipset parport_pc 00:0b: reported by Plug and Play ACPI parport0: PC-style at 0x3bc, irq 7 [PCSPP(,...)] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:02:00.0 [1014:0528] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:00.0, mfunc 0x01d11002, devctl 0x64 ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 ipw2100: Copyright(c) 2003-2006 Intel Corporation Yenta: ISA IRQ mask 0x0438, PCI irq 11 Socket status: 30000007 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff ipw2100 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 ipw2100: Detected Intel PRO/Wireless 2100 Network Connection firmware: requesting ipw2100-1.3.fw Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Intel ICH 0000:00:1f.5: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 55413 usecs intel8x0: clocking to 48000 EXT3 FS on dm-1, internal journal loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-7, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1004956k swap on /dev/mapper/swap. Priority:-1 extents:1 across:1004956k ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (12288 buckets, 49152 max) pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. fuse init (API version 7.9) [drm] Initialized drm 1.1.0 20060810 pci 0000:01:00.0: power state changed by ACPI to D0 pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized radeon 1.29.0 20080528 on minor 0 agpgart-intel 0000:00:00.0: AGP 2.0 bridge agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode pci 0000:01:00.0: putting AGP V2 device into 4x mode [drm] Setting GART location based on new memory map [drm] Loading R100 Microcode [drm] writeback test succeeded in 1 usecs