Go to:
Gentoo Home
Documentation
Forums
Lists
Bugs
Planet
Store
Wiki
Get Gentoo!
Gentoo's Bugzilla – Attachment 174557 Details for
Bug 244338
md raid1 array unstable
Home
|
New
–
[Ex]
|
Browse
|
Search
|
Privacy Policy
|
[?]
|
Reports
|
Requests
|
Help
|
New Account
|
Log In
[x]
|
Forgot Password
Login:
[x]
new boot with irqpoll
console2.txt (text/plain), 86.15 KB, created by
igor
on 2008-12-07 14:41:16 UTC
(
hide
)
Description:
new boot with irqpoll
Filename:
MIME Type:
Creator:
igor
Created:
2008-12-07 14:41:16 UTC
Size:
86.15 KB
patch
obsolete
>Linux version 2.6.26-gentoo-r3 (root@Avalon) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #2 SMP Mon Nov 24 20:28:44 EET 2008 >Command line: root=/dev/hdb3 irqpoll console=tty0 console=ttyS0,9600 >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f000 (usable) > BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) > BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) > BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) > BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) >max_pfn_mapped = 1048576 >init_memory_mapping >DMI 2.4 present. >Scanning NUMA topology in Northbridge 24 >No NUMA configuration found >Faking a node at 0000000000000000-000000007fee0000 >Bootmem setup node 0 0000000000000000-000000007fee0000 > NODE_DATA [0000000000001000 - 0000000000004fff] > bootmap [000000000000c000 - 000000000001bfdf] pages 10 > early res: 0 [0-fff] BIOS data page > early res: 1 [6000-7fff] TRAMPOLINE > early res: 2 [200000-814b8b] TEXT DATA BSS > early res: 3 [9f000-fffff] BIOS reserved > early res: 4 [8000-bfff] PGTABLE >Zone PFN ranges: > DMA 0 -> 4096 > DMA32 4096 -> 1048576 > Normal 1048576 -> 1048576 >Movable zone start PFN for each node >early_node_map[2] active PFN ranges > 0: 0 -> 159 > 0: 256 -> 524000 >Intel MultiProcessor Specification v1.4 >MPTABLE: OEM ID: OEM00000 Product ID: PROD00000000 <6>MPTABLE: Product ID: PROD00000000 <6>MPTABLE: APIC at: 0xFEE00000 >Processor #0 (Bootup-CPU) >Processor #1 >I/O APIC #2 Version 17 at 0xFEC00000. >Setting APIC routing to flat >Processors: 2 >Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) >SMP: Allowing 2 CPUs, 0 hotplug CPUs >PERCPU: Allocating 35120 bytes of per cpu data >Built 1 zonelists in Node order, mobility grouping on. Total pages: 515076 >Policy zone: DMA32 >Kernel command line: root=/dev/hdb3 irqpoll console=tty0 console=ttyS0,9600 >Misrouted IRQ fixup and polling support enabled >This may significantly impact system performance >Initializing CPU#0 >PID hash table entries: 4096 (order: 12, 32768 bytes) >TSC calibrated against PIT >Marking TSC unstable due to TSCs unsynchronized >time.c: Detected 2211.358 MHz processor. >Console: colour VGA+ 80x25 >console [tty0] enabled >console [ttyS0] enabled >Checking aperture... >Node 0: aperture @ e220000000 size 32 MB >Aperture beyond 4GB. Ignoring. >No AGP bridge found >Memory: 2060212k/2096000k available (3167k kernel code, 35400k reserved, 1797k data, 336k init) >Calibrating delay using timer specific routine.. 4463.13 BogoMIPS (lpj=8926278) >Security Framework initialized >Capability LSM initialized >Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) >Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) >Mount-cache hash table entries: 256 >CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >CPU: L2 Cache: 512K (64 bytes/line) >CPU 0/0 -> Node 0 >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 0 >ExtINT not setup in hardware but reported by MP table >CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 >Using local APIC timer interrupts. >Detected 12.564 MHz APIC timer. >Booting processor 1/1 ip 6000 >Initializing CPU#1 >Calibrating delay using timer specific routine.. 4422.83 BogoMIPS (lpj=8845669) >CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >CPU: L2 Cache: 512K (64 bytes/line) >CPU 1/1 -> Node 0 >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 1 >CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 >Brought up 2 CPUs >Total of 2 processors activated (8885.97 BogoMIPS). >net_namespace: 568 bytes >NET: Registered protocol family 16 >TOM: 0000000080000000 aka 2048M >PCI: Using configuration type 1 for base access >SCSI subsystem initialized >usbcore: registered new interface driver usbfs >usbcore: registered new interface driver hub >usbcore: registered new device driver usb >PCI: Probing PCI hardware >PCI: Transparent bridge - 0000:00:09.0 >PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 11 >PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 3 >PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 5 >PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 11 >PCI->APIC IRQ transform: 0000:00:07.0[A] -> IRQ 5 >PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 11 >PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 3 >PCI->APIC IRQ transform: 0000:01:06.0[A] -> IRQ 5 >PCI->APIC IRQ transform: 0000:05:00.0[A] -> IRQ 3 >PCI: Bridge: 0000:00:09.0 > IO window: a000-afff > MEM window: 0xfdf00000-0xfdffffff > PREFETCH window: 0x0000000080000000-0x00000000800fffff >PCI: Bridge: 0000:00:0b.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. >PCI: Bridge: 0000:00:0c.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. >PCI: Bridge: 0000:00:0d.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. >PCI: Bridge: 0000:00:0e.0 > IO window: disabled. > MEM window: 0xfa000000-0xfcffffff > PREFETCH window: 0x00000000d0000000-0x00000000dfffffff >NET: Registered protocol family 2 >IP route cache hash table entries: 65536 (order: 7, 524288 bytes) >TCP established hash table entries: 262144 (order: 10, 4194304 bytes) >TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >TCP: Hash tables configured (established 262144 bind 65536) >TCP reno registered >NET: Registered protocol family 1 >Total HugeTLB memory allocated, 0 >fuse init (API version 7.9) >msgmni has been set to 4023 >io scheduler noop registered >io scheduler deadline registered >io scheduler cfq registered (default) >pci 0000:00:00.0: Enabling HT MSI Mapping >pci 0000:00:0b.0: Enabling HT MSI Mapping >pci 0000:00:0b.0: Found enabled HT MSI Mapping >pci 0000:00:0c.0: Enabling HT MSI Mapping >pci 0000:00:0c.0: Found enabled HT MSI Mapping >pci 0000:00:0d.0: Enabling HT MSI Mapping >pci 0000:00:0d.0: Found enabled HT MSI Mapping >pci 0000:00:0e.0: Enabling HT MSI Mapping >pci 0000:00:0e.0: Found enabled HT MSI Mapping >assign_interrupt_mode Found MSI capability >assign_interrupt_mode Found MSI capability >assign_interrupt_mode Found MSI capability >assign_interrupt_mode Found MSI capability >Real Time Clock Driver v1.12ac >Linux agpgart interface v0.103 >Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled >serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >brd: module loaded >loop: module loaded >e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI >e100: Copyright(c) 1999-2006 Intel Corporation >forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. >forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1374 @ 0, addr 00:18:f3:7e:24:64 >forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 >8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) >8139cp 0000:01:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip >8139cp 0000:01:06.0: Try the "8139too" driver instead. >8139too Fast Ethernet driver 0.9.28 >eth1: RealTek RTL8139 at 0xffffc2000088c000, 00:13:f7:1a:94:2c, IRQ 5 >tun: Universal TUN/TAP device driver, 1.6 >tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> >console [netcon0] enabled >netconsole: network logging started >Uniform Multi-Platform E-IDE driver >ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller >NFORCE-CK804: IDE controller (0x10de:0x0053 rev 0xf2) at PCI slot 0000:00:06.0 >NFORCE-CK804: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xe800-0xe807 >Clocksource tsc unstable (delta = 900564343 ns) > ide1: BM-DMA at 0xe808-0xe80f >hda: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive >hdb: Maxtor 7Y250P0, ATA DISK drive >hda: UDMA/66 mode selected >hdb: UDMA/133 mode selected >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >isa bounce pool size: 16 pages >ide1 at 0x170-0x177,0x376 on irq 15 >ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports >ide_generic: I/O resource 0x1F0-0x1F7 not free. >ide_generic: I/O resource 0x170-0x177 not free. >hdb: max request size: 512KiB >hdb: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63 >hdb: cache flushes supported > hdb: hdb1 hdb3 hdb4 >hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache >Uniform CD-ROM driver Revision: 3.20 >Driver 'sd' needs updating - please use bus_type methods >Driver 'sr' needs updating - please use bus_type methods >scsi0 : sata_nv >scsi1 : sata_nv >ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 5 >ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 5 >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata1.00: qc timeout (cmd 0x27) >ata1.00: failed to read native max address (err_mask=0x4) >ata1.00: HPA support seems broken, skipping HPA handling >ata1: failed to recover some devices, retrying in 5 secs >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata1.00: configured for UDMA/133 >ata2: SATA link down (SStatus 0 SControl 300) >scsi 0:0:0:0: Direct-Access ATA MAXTOR STM380211 3.AA PQ: 0 ANSI: 5 >sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) >sd 0:0:0:0: [sda] Write Protect is off >sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) >sd 0:0:0:0: [sda] Write Protect is off >sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda:<3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata1.00: configured for UDMA/133 >ata1: EH complete >ata1: limiting SATA link speed to 1.5 Gbps >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/133 >ata1: EH complete >ata1.00: limiting speed to UDMA/100:PIO4 >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/100 >ata1: EH complete >ata1.00: limiting speed to UDMA/33:PIO4 >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK >sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] >Descriptor sense data with sense descriptors (in hex): > 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 > 00 00 00 00 >sd 0:0:0:0: [sda] Add. Sense: No additional sense information >end_request: I/O error, dev sda, sector 0 >Buffer I/O error on device sda, logical block 0 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK >sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] >Descriptor sense data with sense descriptors (in hex): > 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 > 00 00 00 00 >sd 0:0:0:0: [sda] Add. Sense: No additional sense information >end_request: I/O error, dev sda, sector 0 >Buffer I/O error on device sda, logical block 0 >ata1: EH complete > unable to read partition table >sd 0:0:0:0: [sda] Attached SCSI disk >sd 0:0:0:0: Attached scsi generic sg0 type 0 >scsi2 : sata_nv >scsi3 : sata_nv >ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 11 >ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 11 >ata3: SATA link down (SStatus 0 SControl 300) >ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >ata4.00: ATA-8: SAMSUNG HD161HJ, GF100-07, max UDMA7 >ata4.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 0/32) >ata4.00: configured for UDMA/133 >scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD161HJ GF10 PQ: 0 ANSI: 5 >sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) >sd 3:0:0:0: [sdb] Write Protect is off >sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) >sd 3:0:0:0: [sdb] Write Protect is off >sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sdb: sdb1 sdb2 >sd 3:0:0:0: [sdb] Attached SCSI disk >sd 3:0:0:0: Attached scsi generic sg1 type 0 >ieee1394: raw1394: /dev/raw1394 device initialized >ehci_hcd 0000:00:02.1: EHCI Host Controller >ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 >ehci_hcd 0000:00:02.1: debug port 1 >ehci_hcd 0000:00:02.1: irq 5, io mem 0xfeb00000 >ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >usb usb1: configuration #1 chosen from 1 choice >hub 1-0:1.0: USB hub found >hub 1-0:1.0: 10 ports detected >ohci_hcd 0000:00:02.0: OHCI Host Controller >ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 >ohci_hcd 0000:00:02.0: irq 3, io mem 0xfe02f000 >usb usb2: configuration #1 chosen from 1 choice >hub 2-0:1.0: USB hub found >hub 2-0:1.0: 10 ports detected >USB Universal Host Controller Interface driver v3.0 >usbcore: registered new interface driver usblp >Initializing USB Mass Storage driver... >usbcore: registered new interface driver usb-storage >USB Mass Storage support registered. >serio: i8042 KBD port at 0x60,0x64 irq 1 >serio: i8042 AUX port at 0x60,0x64 irq 12 >mice: PS/2 mouse device common for all mice >md: linear personality registered for level -1 >md: raid1 personality registered for level 1 >md: multipath personality registered for level -4 >md: faulty personality registered for level -5 >device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com >usbcore: registered new interface driver usbhid >usbhid: v2.6:USB HID core driver >Advanced Linux Sound Architecture Driver Version 1.0.16. >intel8x0_measure_ac97_clock: measured 56000 usecs >intel8x0: clocking to 48000 >ALSA device list: > #0: NVidia CK804 with ALC850 at irq 11 >oprofile: using NMI interrupt. >TCP cubic registered >NET: Registered protocol family 10 >IPv6 over IPv4 tunneling driver >NET: Registered protocol family 17 >powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00) >powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver. >powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver. >registered taskstats version 1 >md: Autodetecting RAID arrays. >md: Scanned 1 and added 1 devices. >md: autorun ... >md: considering sdb1 ... >md: adding sdb1 ... >md: created md0 >md: bind<sdb1> >md: running: <sdb1> >raid1: raid set md0 active with 1 out of 2 mirrors >md: ... autorun DONE. >kjournald starting. Commit interval 5 seconds >EXT3-fs: mounted filesystem with ordered data mode. >VFS: Mounted root (ext3 filesystem) readonly. >Freeing unused kernel memory: 336k freed > INIT: version 2.86 booting > >Gentoo Linux; http://www.gentoo.org/ > Copyright 1999-2007 Gentoo Foundation; Distributed under the GPLv2 > >Press I to enter interactive boot mode > > * Mounting proc at /proc ... [ ok ] > * Mounting sysfs at /sys ... [ ok ] > * Mounting /dev ... [ ok ] > * Starting udevd ... [ ok ] > * Populating /dev with existing devices through uevents ...udevd[1064]: main: the kernel does not support inotify, udevd can't monitor rules file changes > > [ ok ] > * Waiting for uevents to be processed ... [ ok ] > > > * Mounting devpts at /dev/pts ... [ ok ] > * Checking root filesystem .../dev/hdb3 has been mounted 39 times without being checked, check forced. >/dev/hdb3: | | 0.3% /dev/hdb3: |= / 0.9% /dev/hdb3: |= - 1.9% /dev/hdb3: |== \ 2.8% /dev/hdb3: |== | 3.8% /dev/hdb3: |== / 4.4% /dev/hdb3: |=== - 4.7% /dev/hdb3: |=== \ 5.0% /dev/hdb3: |=== | 5.3% /dev/hdb3: |=== / 5.9% /dev/hdb3: |==== - 6.2% /dev/hdb3: |==== \ 6.9% /dev/hdb3: |==== | 7.2% /dev/hdb3: |==== / 7.5% /dev/hdb3: |==== - 7.8% /dev/hdb3: |===== \ 8.1% /dev/hdb3: |===== | 8.4% /dev/hdb3: |===== / 8.8% /dev/hdb3: |===== - 9.1% /dev/hdb3: |===== \ 9.4% /dev/hdb3: |===== | 9.7% /dev/hdb3: |====== / 10.0% /dev/hdb3: |====== - 10.3% /dev/hdb3: |====== \ 10.6% /dev/hdb3: |====== | 10.9% /dev/hdb3: |====== / 11.2% /dev/hdb3: |====== - 11.6% /dev/hdb3: |======= \ 11.9% /dev/hdb3: |======= | 12.2% /dev/hdb3: |======= / 12.8% /dev/hdb3: |======= - 13.1% /dev/hdb3: |======== \ 13.4% /dev/hdb3: |======== | 13.8% /dev/hdb3: |======== / 14.1% /dev/hdb3: |======== - 14.4% /dev/hdb3: |======== \ 14.7% /dev/hdb3: |======== | 15.0% /dev/hdb3: |========= / 15.3% /dev/hdb3: |========= - 15.6% /dev/hdb3: |========= \ 16.2% /dev/hdb3: |========= | 16.6% /dev/hdb3: |========== / 17.2% /dev/hdb3: |========== - 17.5% /dev/hdb3: |========== \ 17.8% /dev/hdb3: |========== | 18.4% /dev/hdb3: |=========== / 18.8% /dev/hdb3: |=========== - 19.1% /dev/hdb3: |=========== \ 19.4% /dev/hdb3: |=========== | 19.7% /dev/hdb3: |=========== / 20.3% /dev/hdb3: |============ - 20.6% /dev/hdb3: |============ \ 20.9% /dev/hdb3: |============ | 21.6% /dev/hdb3: |============ / 21.9% /dev/hdb3: |============ - 22.2% /dev/hdb3: |============= \ 22.5% /dev/hdb3: |============= | 22.8% /dev/hdb3: |============= / 23.4% /dev/hdb3: |============= - 24.1% /dev/hdb3: |============== \ 24.4% /dev/hdb3: |============== | 24.7% /dev/hdb3: |============== / 25.0% /dev/hdb3: |============== - 25.3% /dev/hdb3: |============== \ 25.6% /dev/hdb3: |=============== | 25.9% /dev/hdb3: |=============== / 26.2% /dev/hdb3: |=============== - 26.6% /dev/hdb3: |=============== \ 26.9% /dev/hdb3: |=============== | 27.2% /dev/hdb3: |=============== / 27.5% /dev/hdb3: |================ - 27.8% /dev/hdb3: |================ \ 28.1% /dev/hdb3: |================ | 28.4% /dev/hdb3: |================ / 28.8% /dev/hdb3: |================ - 29.1% /dev/hdb3: |================ \ 29.4% /dev/hdb3: |================= | 29.7% /dev/hdb3: |================= / 30.0% /dev/hdb3: |================= - 30.3% /dev/hdb3: |================= \ 30.6% /dev/hdb3: |================= | 30.9% /dev/hdb3: |================== / 31.2% /dev/hdb3: |================== - 31.6% /dev/hdb3: |================== \ 31.9% /dev/hdb3: |================== | 32.2% /dev/hdb3: |================== / 32.5% /dev/hdb3: |================== - 32.8% /dev/hdb3: |=================== \ 33.1% /dev/hdb3: |=================== | 33.4% /dev/hdb3: |=================== / 33.8% /dev/hdb3: |=================== - 34.1% /dev/hdb3: |=================== \ 34.4% /dev/hdb3: |=================== | 34.7% /dev/hdb3: |==================== / 35.0% /dev/hdb3: |==================== - 35.3% /dev/hdb3: |==================== \ 35.6% /dev/hdb3: |==================== | 35.9% /dev/hdb3: |==================== / 36.2% /dev/hdb3: |==================== - 36.6% /dev/hdb3: |===================== \ 36.9% /dev/hdb3: |===================== | 37.2% /dev/hdb3: |===================== / 37.5% /dev/hdb3: |===================== - 37.8% /dev/hdb3: |===================== \ 38.1% /dev/hdb3: |====================== | 38.4% /dev/hdb3: |====================== / 38.8% /dev/hdb3: |====================== - 39.1% /dev/hdb3: |====================== \ 39.4% /dev/hdb3: |====================== | 39.7% /dev/hdb3: |====================== / 40.0% /dev/hdb3: |======================= - 40.3% /dev/hdb3: |======================= \ 40.6% /dev/hdb3: |======================= | 40.9% /dev/hdb3: |======================= / 41.2% /dev/hdb3: |======================= - 41.6% /dev/hdb3: |======================= \ 41.9% /dev/hdb3: |======================== | 42.2% /dev/hdb3: |======================== / 42.5% /dev/hdb3: |======================== - 42.8% /dev/hdb3: |======================== \ 43.1% /dev/hdb3: |======================== | 43.4% /dev/hdb3: |========================= / 43.8% /dev/hdb3: |========================= - 44.1% /dev/hdb3: |========================= \ 44.4% /dev/hdb3: |========================= | 44.7% /dev/hdb3: |========================= / 45.0% /dev/hdb3: |========================= - 45.3% /dev/hdb3: |========================== \ 45.6% /dev/hdb3: |========================== | 46.2% /dev/hdb3: |========================== / 46.9% /dev/hdb3: |=========================== - 47.5% /dev/hdb3: |=========================== \ 48.1% /dev/hdb3: |=========================== | 48.8% /dev/hdb3: |============================ / 49.4% /dev/hdb3: |============================ - 50.0% /dev/hdb3: |============================= \ 50.9% /dev/hdb3: |============================= | 51.6% /dev/hdb3: |============================= / 52.5% /dev/hdb3: |============================== - 53.1% /dev/hdb3: |============================== \ 54.1% /dev/hdb3: |=============================== | 55.0% /dev/hdb3: |=============================== / 55.6% /dev/hdb3: |================================ - 56.6% /dev/hdb3: |================================ \ 57.2% /dev/hdb3: |================================= | 58.1% /dev/hdb3: |================================= / 58.8% /dev/hdb3: |================================= - 59.4% /dev/hdb3: |================================== \ 60.3% /dev/hdb3: |================================== | 60.9% /dev/hdb3: |================================== / 61.2% /dev/hdb3: |=================================== - 61.9% /dev/hdb3: |=================================== \ 62.8% /dev/hdb3: |=================================== | 63.1% /dev/hdb3: |==================================== / 63.8% /dev/hdb3: |==================================== - 64.7% /dev/hdb3: |===================================== \ 65.3% /dev/hdb3: |===================================== | 65.6% /dev/hdb3: |===================================== / 66.6% /dev/hdb3: |====================================== - 67.2% /dev/hdb3: |====================================== \ 68.1% /dev/hdb3: |======================================= | 68.8% /dev/hdb3: |======================================= / 69.7% /dev/hdb3: |======================================= - 70.1% /dev/hdb3: |======================================= \ 70.3% /dev/hdb3: |======================================= | 70.4% /dev/hdb3: |======================================= / 70.5% /dev/hdb3: |======================================== - 70.6% /dev/hdb3: |======================================== \ 70.8% /dev/hdb3: |======================================== | 71.0% /dev/hdb3: |======================================== / 71.1% /dev/hdb3: |======================================== - 71.2% /dev/hdb3: |======================================== \ 71.3% /dev/hdb3: |======================================== | 71.4% /dev/hdb3: |======================================== / 71.5% /dev/hdb3: |======================================== - 71.8% /dev/hdb3: |======================================== \ 71.9% /dev/hdb3: |======================================== | 72.0% /dev/hdb3: |======================================== / 72.2% /dev/hdb3: |======================================== - 72.3% /dev/hdb3: |========================================= \ 72.5% /dev/hdb3: |========================================= | 72.6% /dev/hdb3: |========================================= / 72.8% /dev/hdb3: |========================================= - 72.9% /dev/hdb3: |========================================= \ 73.0% /dev/hdb3: |========================================= | 73.1% /dev/hdb3: |========================================= / 73.2% /dev/hdb3: |========================================= - 73.4% /dev/hdb3: |========================================= \ 73.6% /dev/hdb3: |========================================= | 73.7% /dev/hdb3: |========================================= / 73.9% /dev/hdb3: |========================================= - 74.1% /dev/hdb3: |========================================== \ 74.3% /dev/hdb3: |========================================== | 74.4% /dev/hdb3: |========================================== / 74.6% /dev/hdb3: |========================================== - 74.7% /dev/hdb3: |========================================== \ 74.9% /dev/hdb3: |========================================== | 75.1% /dev/hdb3: |========================================== / 75.2% /dev/hdb3: |========================================== - 75.3% /dev/hdb3: |========================================== \ 75.5% /dev/hdb3: |========================================== | 75.7% /dev/hdb3: |========================================== / 75.9% /dev/hdb3: |=========================================== - 76.0% /dev/hdb3: |=========================================== \ 76.2% /dev/hdb3: |=========================================== | 76.3% /dev/hdb3: |=========================================== / 76.5% /dev/hdb3: |=========================================== - 76.6% /dev/hdb3: |=========================================== \ 76.8% /dev/hdb3: |=========================================== | 77.0% /dev/hdb3: |=========================================== / 77.1% /dev/hdb3: |=========================================== - 77.3% /dev/hdb3: |=========================================== \ 77.4% /dev/hdb3: |=========================================== | 77.6% /dev/hdb3: |=========================================== / 77.7% /dev/hdb3: |============================================ - 77.8% /dev/hdb3: |============================================ \ 78.0% /dev/hdb3: |============================================ | 78.1% /dev/hdb3: |============================================ / 78.3% /dev/hdb3: |============================================ - 78.5% /dev/hdb3: |============================================ \ 78.6% /dev/hdb3: |============================================ | 78.8% /dev/hdb3: |============================================ / 78.9% /dev/hdb3: |============================================ - 79.1% /dev/hdb3: |============================================ \ 79.2% /dev/hdb3: |============================================ | 79.3% /dev/hdb3: |============================================ / 79.5% /dev/hdb3: |============================================= - 79.6% /dev/hdb3: |============================================= \ 79.8% /dev/hdb3: |============================================= | 79.9% /dev/hdb3: |============================================= / 80.1% /dev/hdb3: |============================================= - 80.2% /dev/hdb3: |============================================= \ 80.4% /dev/hdb3: |============================================= | 80.6% /dev/hdb3: |============================================= / 80.8% /dev/hdb3: |============================================= - 80.9% /dev/hdb3: |============================================= \ 81.1% /dev/hdb3: |============================================== | 81.3% /dev/hdb3: |============================================== / 81.5% /dev/hdb3: |============================================== - 81.6% /dev/hdb3: |============================================== \ 81.8% /dev/hdb3: |============================================== | 82.0% /dev/hdb3: |============================================== / 82.1% /dev/hdb3: |============================================== - 82.3% /dev/hdb3: |============================================== \ 82.4% /dev/hdb3: |============================================== | 82.6% /dev/hdb3: |============================================== / 82.7% /dev/hdb3: |============================================== - 82.9% /dev/hdb3: |=============================================== \ 83.1% /dev/hdb3: |=============================================== | 83.2% /dev/hdb3: |=============================================== / 83.4% /dev/hdb3: |=============================================== - 83.5% /dev/hdb3: |=============================================== \ 83.6% /dev/hdb3: |=============================================== | 83.7% /dev/hdb3: |=============================================== / 83.9% /dev/hdb3: |=============================================== - 84.0% /dev/hdb3: |=============================================== \ 84.2% /dev/hdb3: |=============================================== | 84.3% /dev/hdb3: |=============================================== / 84.5% /dev/hdb3: |=============================================== - 84.6% /dev/hdb3: |=============================================== \ 84.7% /dev/hdb3: |================================================ | 84.9% /dev/hdb3: |================================================ / 85.0% /dev/hdb3: |================================================ - 85.2% /dev/hdb3: |================================================ \ 85.4% /dev/hdb3: |================================================ | 85.5% /dev/hdb3: |================================================ / 85.7% /dev/hdb3: |================================================ - 85.8% /dev/hdb3: |================================================ \ 86.0% /dev/hdb3: |================================================ | 86.1% /dev/hdb3: |================================================ / 86.3% /dev/hdb3: |================================================ - 86.4% /dev/hdb3: |================================================ \ 86.6% /dev/hdb3: |================================================= | 86.8% /dev/hdb3: |================================================= / 86.9% /dev/hdb3: |================================================= - 87.0% /dev/hdb3: |================================================= \ 87.1% /dev/hdb3: |================================================= | 87.2% /dev/hdb3: |================================================= / 87.3% /dev/hdb3: |================================================= - 87.4% /dev/hdb3: |================================================= \ 87.5% /dev/hdb3: |================================================= | 87.7% /dev/hdb3: |================================================= / 87.8% /dev/hdb3: |================================================= - 87.9% /dev/hdb3: |================================================= \ 88.0% /dev/hdb3: |================================================= | 88.1% /dev/hdb3: |================================================= / 88.2% /dev/hdb3: |================================================= - 88.3% /dev/hdb3: |================================================== \ 88.5% /dev/hdb3: |================================================== | 88.6% /dev/hdb3: |================================================== / 88.7% /dev/hdb3: |================================================== - 88.9% /dev/hdb3: |================================================== \ 89.0% /dev/hdb3: |================================================== | 89.1% /dev/hdb3: |================================================== / 89.2% /dev/hdb3: |================================================== - 89.3% /dev/hdb3: |================================================== \ 89.4% /dev/hdb3: |================================================== | 89.5% /dev/hdb3: |================================================== / 89.6% /dev/hdb3: |================================================== - 89.7% /dev/hdb3: |================================================== \ 89.8% /dev/hdb3: |================================================== | 89.9% /dev/hdb3: |================================================== / 90.0% /dev/hdb3: |================================================== - 90.1% /dev/hdb3: |==================================================== \ 93.4% /dev/hdb3: |===================================================== | 95.1% /dev/hdb3: |====================================================== / 97.2% /dev/hdb3: |========================================================| 100.0% /dev/hdb3: 422097/1831424 files (3.5% non-contiguous), 2324483/7325632 blocks > [ ok ] > * Remounting root filesystem read/write ... [ ok ] > * Setting up the Logical Volume Manager ... > > [ ok ] > * Setting up dm-crypt mappings ... [ ok ] > * Checking all filesystems .../dev/md0: clean, 26231/4890624 files, 6248029/19537024 blocks > [ ok ] > * Mounting local filesystems ... [ ok ] > * Mounting USB device filesystem (usbfs) ... [ ok ] > * Mounting security filesystem ... [ ok ] > * Activating (possible) swap ... [ ok ] > * Setting up dm-crypt mappings ... [ ok ] > * Setting system clock using the hardware clock [Local Time] ... [ ok ] > * Configuring kernel parameters ... [ ok ] > * Updating environment ... [ ok ] > * Cleaning /var/lock, /var/run ... [ ok ] > * Wiping /tmp directory ... [ ok ] > * Device initiated services: udev-postmount > * Setting hostname to Avalon ... [ ok ] > * Loading ALSA modules ... [ ok ] > * Restoring Mixer Levels ... [ ok ] > * Loading key mappings ... [ ok ] > * Setting terminal encoding to UTF-8 ... [ ok ] > * Setting user font ... [ ok ] > * The mdraid init script is written for baselayout-2 > * Please do not use it with baselayout-1 > * Starting lo > * Bringing up lo > * 127.0.0.1/8 > [ ok ] > * Adding routes > * 127.0.0.0/8 ... [ ok ] > * Initializing random number generator ... [ ok ] > INIT: Entering runlevel: 3 > * Starting syslog-ng ... [ ok ] > * Starting eth0 > * Bringing up eth0 > * 192.168.0.34 > [ ok ] > * Adding routes > * default via 192.168.0.65 ... [ ok ] > * Mounting network filesystems ... [ ok ] >which: no kdm in (/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/sbin:/bin:/usr/bin:/sbin:/usr/sbin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2:/usr/kde/3.5/sbin:/usr/kde/3.5/bin:/usr/qt/3/bin) > * Setting up xdm ...start-stop-daemon: stat /usr/bin/xdm: No such file or directory (No such file or directory) > * ERROR: could not start the Display Manager > [ ok ] > * The mdraid init script is written for baselayout-2 > * Please do not use it with baselayout-1 > * Starting ntpd ... [ ok ] > * Starting sshd ... [ ok ] > * Starting vixie-cron ... [ ok ] > * Starting local ... [ ok ] > > >This is Avalon (Linux x86_64 2.6.26-gentoo-r3) 16:26:07 > >Avalon login: igor >Password: >Last login: Sun Dec 7 15:50:25 EET 2008 on tty2 >[01;32migor@Avalon[01;34m ~ $[00m cat sudo cat /proc/interrupts >Password: > CPU0 CPU1 > 0: 53 0 IO-APIC-edge timer > 1: 0 2 IO-APIC-edge i8042 > 2: 0 0 XT-PIC-XT cascade > 3: 2 4969 IO-APIC-fasteoi ohci_hcd:usb2, eth0 > 4: 13 1937 IO-APIC-edge serial > 5: 7 166 IO-APIC-fasteoi sata_nv, ehci_hcd:usb1 > 7: 1 0 IO-APIC-edge > 8: 0 0 IO-APIC-edge rtc > 11: 9009 320177391 IO-APIC-fasteoi sata_nv, NVidia CK804 > 12: 1 3 IO-APIC-edge i8042 > 14: 19 47090 IO-APIC-edge ide0 > 15: 0 0 IO-APIC-edge ide1 >NMI: 0 0 Non-maskable interrupts >LOC: 267774 266777 Local timer interrupts >RES: 3081 3244 Rescheduling interrupts >CAL: 44 69 function call interrupts >TLB: 430 297 TLB shootdowns >TRM: 0 0 Thermal event interrupts >THR: 0 0 Threshold APIC interrupts >SPU: 0 0 Spurious interrupts >ERR: 1 >[01;32migor@Avalon[01;34m ~ $[00m [Ksudo dmesg >Linux version 2.6.26-gentoo-r3 (root@Avalon) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #2 SMP Mon Nov 24 20:28:44 EET 2008 >Command line: root=/dev/hdb3 irqpoll console=tty0 console=ttyS0,9600 >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f000 (usable) > BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) > BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) > BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) > BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) >Entering add_active_range(0, 0, 159) 0 entries of 3200 used >Entering add_active_range(0, 256, 524000) 1 entries of 3200 used >max_pfn_mapped = 1048576 >init_memory_mapping >DMI 2.4 present. >Scanning NUMA topology in Northbridge 24 >No NUMA configuration found >Faking a node at 0000000000000000-000000007fee0000 >Entering add_active_range(0, 0, 159) 0 entries of 3200 used >Entering add_active_range(0, 256, 524000) 1 entries of 3200 used >Bootmem setup node 0 0000000000000000-000000007fee0000 > NODE_DATA [0000000000001000 - 0000000000004fff] > bootmap [000000000000c000 - 000000000001bfdf] pages 10 > early res: 0 [0-fff] BIOS data page > early res: 1 [6000-7fff] TRAMPOLINE > early res: 2 [200000-814b8b] TEXT DATA BSS > early res: 3 [9f000-fffff] BIOS reserved > early res: 4 [8000-bfff] PGTABLE > [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0 >Zone PFN ranges: > DMA 0 -> 4096 > DMA32 4096 -> 1048576 > Normal 1048576 -> 1048576 >Movable zone start PFN for each node >early_node_map[2] active PFN ranges > 0: 0 -> 159 > 0: 256 -> 524000 >On node 0 totalpages: 523903 > DMA zone: 56 pages used for memmap > DMA zone: 1662 pages reserved > DMA zone: 2281 pages, LIFO batch:0 > DMA32 zone: 7109 pages used for memmap > DMA32 zone: 512795 pages, LIFO batch:31 > Normal zone: 0 pages used for memmap > Movable zone: 0 pages used for memmap >Intel MultiProcessor Specification v1.4 >MPTABLE: OEM ID: OEM00000 Product ID: PROD00000000 <6>MPTABLE: Product ID: PROD00000000 <6>MPTABLE: APIC at: 0xFEE00000 >Processor #0 (Bootup-CPU) >Processor #1 >I/O APIC #2 Version 17 at 0xFEC00000. >Setting APIC routing to flat >Processors: 2 >Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) >SMP: Allowing 2 CPUs, 0 hotplug CPUs >PERCPU: Allocating 35120 bytes of per cpu data >NR_CPUS: 32, nr_cpu_ids: 2 >Built 1 zonelists in Node order, mobility grouping on. Total pages: 515076 >Policy zone: DMA32 >Kernel command line: root=/dev/hdb3 irqpoll console=tty0 console=ttyS0,9600 >Misrouted IRQ fixup and polling support enabled >This may significantly impact system performance >Initializing CPU#0 >PID hash table entries: 4096 (order: 12, 32768 bytes) >TSC calibrated against PIT >Marking TSC unstable due to TSCs unsynchronized >time.c: Detected 2211.358 MHz processor. >spurious 8259A interrupt: IRQ7. >Console: colour VGA+ 80x25 >console [tty0] enabled >console [ttyS0] enabled >Checking aperture... >Node 0: aperture @ e220000000 size 32 MB >Aperture beyond 4GB. Ignoring. >No AGP bridge found >Memory: 2060212k/2096000k available (3167k kernel code, 35400k reserved, 1797k data, 336k init) >CPA: page pool initialized 1 of 1 pages preallocated >Calibrating delay using timer specific routine.. 4463.13 BogoMIPS (lpj=8926278) >Security Framework initialized >Capability LSM initialized >Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) >Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) >Mount-cache hash table entries: 256 >CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >CPU: L2 Cache: 512K (64 bytes/line) >CPU 0/0 -> Node 0 >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 0 >ExtINT not setup in hardware but reported by MP table >CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 >Using local APIC timer interrupts. >APIC timer calibration result 12564533 >Detected 12.564 MHz APIC timer. >Booting processor 1/1 ip 6000 >Initializing CPU#1 >Calibrating delay using timer specific routine.. 4422.83 BogoMIPS (lpj=8845669) >CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >CPU: L2 Cache: 512K (64 bytes/line) >CPU 1/1 -> Node 0 >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 1 >CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 >Brought up 2 CPUs >Total of 2 processors activated (8885.97 BogoMIPS). >net_namespace: 568 bytes >NET: Registered protocol family 16 >node 0 link 0: io port [a000, ffff] >TOM: 0000000080000000 aka 2048M >node 0 link 0: mmio [a0000, bffff] >node 0 link 0: mmio [feb00000, fec0ffff] >node 0 link 0: mmio [80000000, dfffffff] >node 0 link 0: mmio [f0000000, fe02ffff] >node 0 link 0: mmio [e0000000, e05fffff] >bus: [00,05] on node 0 link 0 >bus: 00 index 0 io port: [0, ffff] >bus: 00 index 1 mmio: [a0000, bffff] >bus: 00 index 2 mmio: [fe030000, fcffffffff] >bus: 00 index 3 mmio: [80000000, efffffff] >bus: 00 index 4 mmio: [f0000000, fe02ffff] >PCI: Using configuration type 1 for base access >SCSI subsystem initialized >libata version 3.00 loaded. >usbcore: registered new interface driver usbfs >usbcore: registered new interface driver hub >usbcore: registered new device driver usb >PCI: Probing PCI hardware >PCI: Probing PCI hardware (bus 00) >PCI: Transparent bridge - 0000:00:09.0 >PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 11 >PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 3 >PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 5 >PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 11 >PCI->APIC IRQ transform: 0000:00:07.0[A] -> IRQ 5 >PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 11 >PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 3 >PCI->APIC IRQ transform: 0000:01:06.0[A] -> IRQ 5 >PCI->APIC IRQ transform: 0000:05:00.0[A] -> IRQ 3 >PCI: Bridge: 0000:00:09.0 > IO window: a000-afff > MEM window: 0xfdf00000-0xfdffffff > PREFETCH window: 0x0000000080000000-0x00000000800fffff >PCI: Bridge: 0000:00:0b.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. >PCI: Bridge: 0000:00:0c.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. >PCI: Bridge: 0000:00:0d.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. >PCI: Bridge: 0000:00:0e.0 > IO window: disabled. > MEM window: 0xfa000000-0xfcffffff > PREFETCH window: 0x00000000d0000000-0x00000000dfffffff >PCI: Setting latency timer of device 0000:00:09.0 to 64 >PCI: Setting latency timer of device 0000:00:0b.0 to 64 >PCI: Setting latency timer of device 0000:00:0c.0 to 64 >PCI: Setting latency timer of device 0000:00:0d.0 to 64 >PCI: Setting latency timer of device 0000:00:0e.0 to 64 >NET: Registered protocol family 2 >IP route cache hash table entries: 65536 (order: 7, 524288 bytes) >TCP established hash table entries: 262144 (order: 10, 4194304 bytes) >TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >TCP: Hash tables configured (established 262144 bind 65536) >TCP reno registered >NET: Registered protocol family 1 >Total HugeTLB memory allocated, 0 >fuse init (API version 7.9) >msgmni has been set to 4023 >io scheduler noop registered >io scheduler deadline registered >io scheduler cfq registered (default) >pci 0000:00:00.0: Enabling HT MSI Mapping >pci 0000:00:0b.0: Enabling HT MSI Mapping >pci 0000:00:0b.0: Found enabled HT MSI Mapping >pci 0000:00:0c.0: Enabling HT MSI Mapping >pci 0000:00:0c.0: Found enabled HT MSI Mapping >pci 0000:00:0d.0: Enabling HT MSI Mapping >pci 0000:00:0d.0: Found enabled HT MSI Mapping >pci 0000:00:0e.0: Enabling HT MSI Mapping >pci 0000:00:0e.0: Found enabled HT MSI Mapping >pci 0000:05:00.0: Boot video device >PCI: Setting latency timer of device 0000:00:0b.0 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:0b.0:pcie00] >PCI: Setting latency timer of device 0000:00:0c.0 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:0c.0:pcie00] >PCI: Setting latency timer of device 0000:00:0d.0 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:0d.0:pcie00] >PCI: Setting latency timer of device 0000:00:0e.0 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:0e.0:pcie00] >Real Time Clock Driver v1.12ac >Linux agpgart interface v0.103 >Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled >serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >brd: module loaded >loop: module loaded >e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI >e100: Copyright(c) 1999-2006 Intel Corporation >forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. >PCI: Setting latency timer of device 0000:00:0a.0 to 64 >forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1374 @ 0, addr 00:18:f3:7e:24:64 >forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 >8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) >8139cp 0000:01:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip >8139cp 0000:01:06.0: Try the "8139too" driver instead. >8139too Fast Ethernet driver 0.9.28 >eth1: RealTek RTL8139 at 0xffffc2000088c000, 00:13:f7:1a:94:2c, IRQ 5 >eth1: Identified 8139 chip type 'RTL-8100B/8139D' >tun: Universal TUN/TAP device driver, 1.6 >tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> >console [netcon0] enabled >netconsole: network logging started >Uniform Multi-Platform E-IDE driver >ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller >NFORCE-CK804: IDE controller (0x10de:0x0053 rev 0xf2) at PCI slot 0000:00:06.0 >NFORCE-CK804: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xe800-0xe807 >Clocksource tsc unstable (delta = 900564343 ns) > ide1: BM-DMA at 0xe808-0xe80f >Probing IDE interface ide0... >hda: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive >hdb: Maxtor 7Y250P0, ATA DISK drive >hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 >hda: UDMA/66 mode selected >hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 >hdb: UDMA/133 mode selected >Probing IDE interface ide1... >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >isa bounce pool size: 16 pages >ide1 at 0x170-0x177,0x376 on irq 15 >ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports >ide_generic: I/O resource 0x1F0-0x1F7 not free. >ide_generic: I/O resource 0x170-0x177 not free. >hdb: max request size: 512KiB >hdb: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63 >hdb: cache flushes supported > hdb: hdb1 hdb3 hdb4 >hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache >Uniform CD-ROM driver Revision: 3.20 >Driver 'sd' needs updating - please use bus_type methods >Driver 'sr' needs updating - please use bus_type methods >sata_nv 0000:00:07.0: version 3.5 >PCI: Setting latency timer of device 0000:00:07.0 to 64 >scsi0 : sata_nv >scsi1 : sata_nv >ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 5 >ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 5 >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata1.00: qc timeout (cmd 0x27) >ata1.00: failed to read native max address (err_mask=0x4) >ata1.00: HPA support seems broken, skipping HPA handling >ata1: failed to recover some devices, retrying in 5 secs >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata1.00: configured for UDMA/133 >ata2: SATA link down (SStatus 0 SControl 300) >scsi 0:0:0:0: Direct-Access ATA MAXTOR STM380211 3.AA PQ: 0 ANSI: 5 >sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) >sd 0:0:0:0: [sda] Write Protect is off >sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) >sd 0:0:0:0: [sda] Write Protect is off >sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda:<3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata1.00: configured for UDMA/133 >ata1: EH complete >ata1: limiting SATA link speed to 1.5 Gbps >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/133 >ata1: EH complete >ata1.00: limiting speed to UDMA/100:PIO4 >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/100 >ata1: EH complete >ata1.00: limiting speed to UDMA/33:PIO4 >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK >sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] >Descriptor sense data with sense descriptors (in hex): > 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 > 00 00 00 00 >sd 0:0:0:0: [sda] Add. Sense: No additional sense information >end_request: I/O error, dev sda, sector 0 >Buffer I/O error on device sda, logical block 0 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK >sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] >Descriptor sense data with sense descriptors (in hex): > 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 > 00 00 00 00 >sd 0:0:0:0: [sda] Add. Sense: No additional sense information >end_request: I/O error, dev sda, sector 0 >Buffer I/O error on device sda, logical block 0 >ata1: EH complete > unable to read partition table >sd 0:0:0:0: [sda] Attached SCSI disk >sd 0:0:0:0: Attached scsi generic sg0 type 0 >PCI: Setting latency timer of device 0000:00:08.0 to 64 >scsi2 : sata_nv >scsi3 : sata_nv >ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 11 >ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 11 >ata3: SATA link down (SStatus 0 SControl 300) >ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >ata4.00: ATA-8: SAMSUNG HD161HJ, GF100-07, max UDMA7 >ata4.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 0/32) >ata4.00: configured for UDMA/133 >scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD161HJ GF10 PQ: 0 ANSI: 5 >sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) >sd 3:0:0:0: [sdb] Write Protect is off >sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) >sd 3:0:0:0: [sdb] Write Protect is off >sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sdb: sdb1 sdb2 >sd 3:0:0:0: [sdb] Attached SCSI disk >sd 3:0:0:0: Attached scsi generic sg1 type 0 >ieee1394: raw1394: /dev/raw1394 device initialized >PCI: Setting latency timer of device 0000:00:02.1 to 64 >ehci_hcd 0000:00:02.1: EHCI Host Controller >ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 >ehci_hcd 0000:00:02.1: debug port 1 >PCI: cache line size of 64 is not supported by device 0000:00:02.1 >ehci_hcd 0000:00:02.1: irq 5, io mem 0xfeb00000 >ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >usb usb1: configuration #1 chosen from 1 choice >hub 1-0:1.0: USB hub found >hub 1-0:1.0: 10 ports detected >ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver >PCI: Setting latency timer of device 0000:00:02.0 to 64 >ohci_hcd 0000:00:02.0: OHCI Host Controller >ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 >ohci_hcd 0000:00:02.0: irq 3, io mem 0xfe02f000 >usb usb2: configuration #1 chosen from 1 choice >hub 2-0:1.0: USB hub found >hub 2-0:1.0: 10 ports detected >USB Universal Host Controller Interface driver v3.0 >usbcore: registered new interface driver usblp >Initializing USB Mass Storage driver... >usbcore: registered new interface driver usb-storage >USB Mass Storage support registered. >serio: i8042 KBD port at 0x60,0x64 irq 1 >serio: i8042 AUX port at 0x60,0x64 irq 12 >mice: PS/2 mouse device common for all mice >md: linear personality registered for level -1 >md: raid1 personality registered for level 1 >md: multipath personality registered for level -4 >md: faulty personality registered for level -5 >device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com >usbcore: registered new interface driver usbhid >usbhid: v2.6:USB HID core driver >Advanced Linux Sound Architecture Driver Version 1.0.16. >PCI: Setting latency timer of device 0000:00:04.0 to 64 >intel8x0_measure_ac97_clock: measured 56000 usecs >intel8x0: clocking to 48000 >ALSA device list: > #0: NVidia CK804 with ALC850 at irq 11 >oprofile: using NMI interrupt. >TCP cubic registered >NET: Registered protocol family 10 >IPv6 over IPv4 tunneling driver >NET: Registered protocol family 17 >powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00) >powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver. >powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver. >registered taskstats version 1 >md: Autodetecting RAID arrays. >md: Scanned 1 and added 1 devices. >md: autorun ... >md: considering sdb1 ... >md: adding sdb1 ... >md: created md0 >md: bind<sdb1> >md: running: <sdb1> >raid1: raid set md0 active with 1 out of 2 mirrors >md: ... autorun DONE. >kjournald starting. Commit interval 5 seconds >EXT3-fs: mounted filesystem with ordered data mode. >VFS: Mounted root (ext3 filesystem) readonly. >Freeing unused kernel memory: 336k freed >nvidia: module license 'NVIDIA' taints kernel. >PCI: Setting latency timer of device 0000:05:00.0 to 64 >NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.09 Wed Jun 4 23:40:50 PDT 2008 >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >INFO: task lvm:2031 blocked for more than 120 seconds. >"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. >lvm D ffffffff805292c0 0 2031 1024 > ffff81007dc0bc38 0000000000000082 0000000000000000 ffff81007e464800 > ffff81007e659310 ffff81007fb74690 ffff81007e659588 000000018033bfab > 00000000ffffffff ffff81007dc9ed78 0000000000000000 0000000000000000 >Call Trace: > [<ffffffff80513eb5>] io_schedule+0x5c/0x9e > [<ffffffff8029fe83>] __blockdev_direct_IO+0x891/0x9fa > [<ffffffff8029ed1a>] blkdev_direct_IO+0x45/0x4a > [<ffffffff8029ec3f>] blkdev_get_blocks+0x0/0x96 > [<ffffffff8025479d>] generic_file_aio_read+0xa0/0x4c6 > [<ffffffff8029e6cf>] do_open+0x20e/0x294 > [<ffffffff80341696>] blkdev_ioctl+0x60c/0x68a > [<ffffffff8029e915>] blkdev_open+0x0/0x5d > [<ffffffff8027b06b>] do_sync_read+0xc9/0x10c > [<ffffffff8023e29d>] autoremove_wake_function+0x0/0x2e > [<ffffffff8029ddd6>] block_ioctl+0x1b/0x1f > [<ffffffff80285e71>] vfs_ioctl+0x21/0x6b > [<ffffffff80514203>] mutex_lock+0xd/0x1e > [<ffffffff8027b73d>] vfs_read+0x99/0xe2 > [<ffffffff8027babf>] sys_read+0x45/0x6e > [<ffffffff8020b00b>] system_call_after_swapgs+0x7b/0x80 > >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >INFO: task ata_aux:100 blocked for more than 120 seconds. >"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. >ata_aux D ffffffff805292c0 0 100 2 > ffff81007f0f9b70 0000000000000046 0000000000000000 ffffffff803b22e3 > ffff81007f0f5310 ffff81007fb74690 ffff81007f0f5588 00000001803b23d7 > 00000000ffffffff ffff81007dc9ec48 0000000000000000 0000000000000000 >Call Trace: > [<ffffffff803b22e3>] __scsi_get_command+0x10/0x86 > [<ffffffff80513f24>] schedule_timeout+0x1e/0xad > [<ffffffff8033befa>] elv_next_request+0xd2/0x193 > [<ffffffff8034846c>] kobject_get+0x12/0x17 > [<ffffffff80513c9b>] wait_for_common+0xcd/0x137 > [<ffffffff80224e0f>] default_wake_function+0x0/0xe > [<ffffffff803402b5>] blk_execute_rq+0x98/0xb8 > [<ffffffff8033dec9>] get_request_wait+0xce/0xe6 > [<ffffffff803b6ffd>] scsi_execute+0xda/0x115 > [<ffffffff803b70f1>] scsi_execute_req+0xb9/0xde > [<ffffffff803d40b4>] sd_revalidate_disk+0x12a/0x111e > [<ffffffff80340000>] blk_rq_map_user+0x134/0x1c3 > [<ffffffff8034846c>] kobject_get+0x12/0x17 > [<ffffffff803d542c>] sd_rescan+0x1a/0x25 > [<ffffffff803e299f>] ata_scsi_dev_rescan+0xa7/0x150 > [<ffffffff803e28f8>] ata_scsi_dev_rescan+0x0/0x150 > [<ffffffff8023b255>] run_workqueue+0x7b/0x103 > [<ffffffff8023bac7>] worker_thread+0x90/0x9b > [<ffffffff8023e29d>] autoremove_wake_function+0x0/0x2e > [<ffffffff8023ba37>] worker_thread+0x0/0x9b > [<ffffffff8023e177>] kthread+0x47/0x74 > [<ffffffff80228e66>] schedule_tail+0x27/0x5c > [<ffffffff8020be28>] child_rip+0xa/0x12 > [<ffffffff8023e130>] kthread+0x0/0x74 > [<ffffffff8020be1e>] child_rip+0x0/0x12 > >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >INFO: task lvm:2031 blocked for more than 120 seconds. >"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. >lvm D ffffffff805292c0 0 2031 1024 > ffff81007dc0bc38 0000000000000082 0000000000000000 ffff81007e464800 > ffff81007e659310 ffff81007fb74690 ffff81007e659588 000000018033bfab > 00000000ffffffff ffff81007dc9ed78 0000000000000000 0000000000000000 >Call Trace: > [<ffffffff80513eb5>] io_schedule+0x5c/0x9e > [<ffffffff8029fe83>] __blockdev_direct_IO+0x891/0x9fa > [<ffffffff8029ed1a>] blkdev_direct_IO+0x45/0x4a > [<ffffffff8029ec3f>] blkdev_get_blocks+0x0/0x96 > [<ffffffff8025479d>] generic_file_aio_read+0xa0/0x4c6 > [<ffffffff8029e6cf>] do_open+0x20e/0x294 > [<ffffffff80341696>] blkdev_ioctl+0x60c/0x68a > [<ffffffff8029e915>] blkdev_open+0x0/0x5d > [<ffffffff8027b06b>] do_sync_read+0xc9/0x10c > [<ffffffff8023e29d>] autoremove_wake_function+0x0/0x2e > [<ffffffff8029ddd6>] block_ioctl+0x1b/0x1f > [<ffffffff80285e71>] vfs_ioctl+0x21/0x6b > [<ffffffff80514203>] mutex_lock+0xd/0x1e > [<ffffffff8027b73d>] vfs_read+0x99/0xe2 > [<ffffffff8027babf>] sys_read+0x45/0x6e > [<ffffffff8020b00b>] system_call_after_swapgs+0x7b/0x80 > >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >INFO: task ata_aux:100 blocked for more than 120 seconds. >"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. >ata_aux D ffffffff805292c0 0 100 2 > ffff81007f0f9b70 0000000000000046 0000000000000000 ffffffff803b22e3 > ffff81007f0f5310 ffff81007fb74690 ffff81007f0f5588 00000001803b23d7 > 00000000ffffffff ffff81007dc9ec48 0000000000000000 0000000000000000 >Call Trace: > [<ffffffff803b22e3>] __scsi_get_command+0x10/0x86 > [<ffffffff80513f24>] schedule_timeout+0x1e/0xad > [<ffffffff8033befa>] elv_next_request+0xd2/0x193 > [<ffffffff8034846c>] kobject_get+0x12/0x17 > [<ffffffff80513c9b>] wait_for_common+0xcd/0x137 > [<ffffffff80224e0f>] default_wake_function+0x0/0xe > [<ffffffff803402b5>] blk_execute_rq+0x98/0xb8 > [<ffffffff8033dec9>] get_request_wait+0xce/0xe6 > [<ffffffff803b6ffd>] scsi_execute+0xda/0x115 > [<ffffffff803b70f1>] scsi_execute_req+0xb9/0xde > [<ffffffff803d40b4>] sd_revalidate_disk+0x12a/0x111e > [<ffffffff80340000>] blk_rq_map_user+0x134/0x1c3 > [<ffffffff8034846c>] kobject_get+0x12/0x17 > [<ffffffff803d542c>] sd_rescan+0x1a/0x25 > [<ffffffff803e299f>] ata_scsi_dev_rescan+0xa7/0x150 > [<ffffffff803e28f8>] ata_scsi_dev_rescan+0x0/0x150 > [<ffffffff8023b255>] run_workqueue+0x7b/0x103 > [<ffffffff8023bac7>] worker_thread+0x90/0x9b > [<ffffffff8023e29d>] autoremove_wake_function+0x0/0x2e > [<ffffffff8023ba37>] worker_thread+0x0/0x9b > [<ffffffff8023e177>] kthread+0x47/0x74 > [<ffffffff80228e66>] schedule_tail+0x27/0x5c > [<ffffffff8020be28>] child_rip+0xa/0x12 > [<ffffffff8023e130>] kthread+0x0/0x74 > [<ffffffff8020be1e>] child_rip+0x0/0x12 > >sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) >sd 0:0:0:0: [sda] Write Protect is off >sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) >sd 0:0:0:0: [sda] Write Protect is off >sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >usb 2-1: new full speed USB device using ohci_hcd and address 2 >usb 2-1: configuration #1 chosen from 1 choice >hub 2-1:1.0: USB hub found >hub 2-1:1.0: 4 ports detected >usb 2-1.3: new low speed USB device using ohci_hcd and address 3 >usb 2-1.3: configuration #1 chosen from 1 choice >input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input0 >input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1.3 >usb 2-1.4: new low speed USB device using ohci_hcd and address 4 >usb 2-1.4: configuration #1 chosen from 1 choice >input: CHICONY HP Basic USB Keyboard as /class/input/input1 >input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:02.0-1.4 >usb 2-1: USB disconnect, address 2 >usb 2-1.3: USB disconnect, address 3 >usb 2-1.4: USB disconnect, address 4 >EXT3 FS on hdb3, internal journal >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen >ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >ata1.00: status: { DRDY } >ata1: hard resetting link >ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >ata1.00: configured for UDMA/33 >ata1: EH complete >INFO: task pvscan:2205 blocked for more than 120 seconds. >"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. >pvscan D ffffffff805292c0 0 2205 2200 > ffff810047c7fc38 0000000000000086 0000000000000000 ffff81007e464800 > ffff810047c46690 ffff81007fb74690 ffff810047c46908 000000018033bfab > 00000000ffffffff ffff81007f0863f8 0000000000000000 0000000000000000 >Call Trace: > [<ffffffff80513eb5>] io_schedule+0x5c/0x9e > [<ffffffff8029fe83>] __blockdev_direct_IO+0x891/0x9fa > [<ffffffff8029ed1a>] blkdev_direct_IO+0x45/0x4a > [<ffffffff8029ec3f>] blkdev_get_blocks+0x0/0x96 > [<ffffffff8025479d>] generic_file_aio_read+0xa0/0x4c6 > [<ffffffff8029e6cf>] do_open+0x20e/0x294 > [<ffffffff80341696>] blkdev_ioctl+0x60c/0x68a > [<ffffffff8029e915>] blkdev_open+0x0/0x5d > [<ffffffff8027b06b>] do_sync_read+0xc9/0x10c > [<ffffffff8023e29d>] autoremove_wake_function+0x0/0x2e > [<ffffffff8029ddd6>] block_ioctl+0x1b/0x1f > [<ffffffff80285e71>] vfs_ioctl+0x21/0x6b > [<ffffffff80514203>] mutex_lock+0xd/0x1e > [<ffffffff8027b73d>] vfs_read+0x99/0xe2 > [<ffffffff8027babf>] sys_read+0x45/0x6e > [<ffffffff8020b00b>] system_call_after_swapgs+0x7b/0x80 > >sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) >sd 0:0:0:0: [sda] Write Protect is off >sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) >sd 0:0:0:0: [sda] Write Protect is off >sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >usb 2-1: new full speed USB device using ohci_hcd and address 5 >kjournald starting. Commit interval 5 seconds >EXT3 FS on md0, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >Adding 2996112k swap on /dev/hdb1. Priority:-1 extents:1 across:2996112k >usb 2-1: configuration #1 chosen from 1 choice >hub 2-1:1.0: USB hub found >hub 2-1:1.0: 4 ports detected >usb 2-1.3: new low speed USB device using ohci_hcd and address 6 >usb 2-1.3: configuration #1 chosen from 1 choice >input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input2 >input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1.3 >usb 2-1.4: new low speed USB device using ohci_hcd and address 7 >usb 2-1.4: configuration #1 chosen from 1 choice >input: CHICONY HP Basic USB Keyboard as /class/input/input3 >input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:02.0-1.4 >usb 2-1: USB disconnect, address 5 >usb 2-1.3: USB disconnect, address 6 >usb 2-1.4: USB disconnect, address 7 >eth0: no IPv6 routers present >[01;32migor@Avalon[01;34m ~ $[00m sudo fdisk -l > >Disk /dev/hdb: 251.0 GB, 251000193024 bytes >255 heads, 63 sectors/track, 30515 cylinders >Units = cylinders of 16065 * 512 = 8225280 bytes >Disk identifier: 0x34101895 > > Device Boot Start End Blocks Id System >/dev/hdb1 30143 30515 2996122+ 82 Linux swap / Solaris >/dev/hdb3 * 1 3648 29302528+ 83 Linux >/dev/hdb4 3649 30142 212813055 83 Linux > >Partition table entries are not in disk order > > >Disk /dev/sda: 80.0 GB, 80026361856 bytes >255 heads, 63 sectors/track, 9729 cylinders >Units = cylinders of 16065 * 512 = 8225280 bytes >Disk identifier: 0x0003029d > > Device Boot Start End Blocks Id System >/dev/sda1 1 9729 78148161 fd Linux raid autodetect > >Disk /dev/sdb: 160.0 GB, 160041885696 bytes >255 heads, 63 sectors/track, 19457 cylinders >Units = cylinders of 16065 * 512 = 8225280 bytes >Disk identifier: 0x00000000 > > Device Boot Start End Blocks Id System >/dev/sdb1 1 9729 78148161 fd Linux raid autodetect >/dev/sdb2 9730 19457 78140160 83 Linux >[01;32migor@Avalon[01;34m ~ $[00m >[01;32migor@Avalon[01;34m ~ $[00m sudo mdadm --detail /dev/md 0 >/dev/md0: > Version : 00.90.03 > Creation Time : Wed Oct 22 22:25:08 2008 > Raid Level : raid1 > Array Size : 78148096 (74.53 GiB 80.02 GB) > Used Dev Size : 78148096 (74.53 GiB 80.02 GB) > Raid Devices : 2 > Total Devices : 1 >Preferred Minor : 0 > Persistence : Superblock is persistent > > Update Time : Sun Dec 7 16:29:14 2008 > State : clean, degraded > Active Devices : 1 >Working Devices : 1 > Failed Devices : 0 > Spare Devices : 0 > > UUID : 3fff4b2a:becd3be1:e368bf24:bd0fce41 > Events : 0.344348 > > Number Major Minor RaidDevice State > 0 8 17 0 active sync /dev/sdb1 > 1 0 0 1 removed >[01;32migor@Avalon[01;34m ~ $[00m [Ksudo mdadm --add * /dev/md0 /dev/sda1 >mdadm: cannot find /dev/sda1: No such file or directory >[01;32migor@Avalon[01;34m ~ $[00m [Ksudo mdadm --add /dev/md0 /dev/sda1detail /dev/md0[Kfdisk -l[K > >Disk /dev/hdb: 251.0 GB, 251000193024 bytes >255 heads, 63 sectors/track, 30515 cylinders >Units = cylinders of 16065 * 512 = 8225280 bytes >Disk identifier: 0x34101895 > > Device Boot Start End Blocks Id System >/dev/hdb1 30143 30515 2996122+ 82 Linux swap / Solaris >/dev/hdb3 * 1 3648 29302528+ 83 Linux >/dev/hdb4 3649 30142 212813055 83 Linux > >Partition table entries are not in disk order > > > > > > > > > > > > > >[01;32migor@Avalon[01;34m ~ $[00m >[01;32migor@Avalon[01;34m ~ $[00m sudo fdisk /des v/sdb > >The number of cylinders for this disk is set to 19457. >There is nothing wrong with that, but this is larger than 1024, >and could in certain setups cause problems with: >1) software that runs at boot time (e.g., old versions of LILO) >2) booting and partitioning software from other OSs > (e.g., DOS FDISK, OS/2 FDISK) > >Command (m for help): p > >Disk /dev/sdb: 160.0 GB, 160041885696 bytes >255 heads, 63 sectors/track, 19457 cylinders >Units = cylinders of 16065 * 512 = 8225280 bytes >Disk identifier: 0x00000000 > > Device Boot Start End Blocks Id System >/dev/sdb1 1 9729 78148161 fd Linux raid autodetect >/dev/sdb2 9730 19457 78140160 83 Linux > >Command (m for help): exit >e: unknown command >Command action > a toggle a bootable flag > b edit bsd disklabel > c toggle the dos compatibility flag > d delete a partition > l list known partition types > m print this menu > n add a new partition > o create a new empty DOS partition table > p print the partition table > q quit without saving changes > s create a new empty Sun disklabel > t change a partition's system id > u change display/entry units > v verify the partition table > w write table to disk and exit > x extra functionality (experts only) > >Command (m for help): q > >[01;32migor@Avalon[01;34m ~ $[00m sudo fdisk /dev/sdb a >
<b>You cannot view the attachment while viewing its details because your browser does not support IFRAMEs. <a href="attachment.cgi?id=174557">View the attachment on a separate page</a>.</b>
View Attachment As Raw
Actions:
View
Attachments on
bug 244338
:
172936
|
172938
|
173070
|
173074
|
173781
|
174188
|
174547
|
174549
| 174557 |
187596
