Linux version 2.6.26-gentoo-r3 (root@Avalon) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #2 SMP Mon Nov 24 20:28:44 EET 2008 Command line: root=/dev/hdb3 irqpoll console=tty0 console=ttyS0,9600 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) max_pfn_mapped = 1048576 init_memory_mapping DMI 2.4 present. Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000007fee0000 Bootmem setup node 0 0000000000000000-000000007fee0000 NODE_DATA [0000000000001000 - 0000000000004fff] bootmap [000000000000c000 - 000000000001bfdf] pages 10 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] TRAMPOLINE early res: 2 [200000-814b8b] TEXT DATA BSS early res: 3 [9f000-fffff] BIOS reserved early res: 4 [8000-bfff] PGTABLE Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 524000 Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: OEM00000 Product ID: PROD00000000 <6>MPTABLE: Product ID: PROD00000000 <6>MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) Processor #1 I/O APIC #2 Version 17 at 0xFEC00000. Setting APIC routing to flat Processors: 2 Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 35120 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 515076 Policy zone: DMA32 Kernel command line: root=/dev/hdb3 irqpoll console=tty0 console=ttyS0,9600 Misrouted IRQ fixup and polling support enabled This may significantly impact system performance Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PIT Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2211.358 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled Checking aperture... Node 0: aperture @ e220000000 size 32 MB Aperture beyond 4GB. Ignoring. No AGP bridge found Memory: 2060212k/2096000k available (3167k kernel code, 35400k reserved, 1797k data, 336k init) Calibrating delay using timer specific routine.. 4463.13 BogoMIPS (lpj=8926278) Security Framework initialized Capability LSM initialized Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ExtINT not setup in hardware but reported by MP table CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 Using local APIC timer interrupts. Detected 12.564 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4422.83 BogoMIPS (lpj=8845669) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 Brought up 2 CPUs Total of 2 processors activated (8885.97 BogoMIPS). net_namespace: 568 bytes NET: Registered protocol family 16 TOM: 0000000080000000 aka 2048M PCI: Using configuration type 1 for base access SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Transparent bridge - 0000:00:09.0 PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 11 PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 3 PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 5 PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 11 PCI->APIC IRQ transform: 0000:00:07.0[A] -> IRQ 5 PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 11 PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 3 PCI->APIC IRQ transform: 0000:01:06.0[A] -> IRQ 5 PCI->APIC IRQ transform: 0000:05:00.0[A] -> IRQ 3 PCI: Bridge: 0000:00:09.0 IO window: a000-afff MEM window: 0xfdf00000-0xfdffffff PREFETCH window: 0x0000000080000000-0x00000000800fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: 0xfa000000-0xfcffffff PREFETCH window: 0x00000000d0000000-0x00000000dfffffff NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Total HugeTLB memory allocated, 0 fuse init (API version 7.9) msgmni has been set to 4023 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Enabling HT MSI Mapping pci 0000:00:0c.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Enabling HT MSI Mapping pci 0000:00:0d.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Found enabled HT MSI Mapping assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability Real Time Clock Driver v1.12ac Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1374 @ 0, addr 00:18:f3:7e:24:64 forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) 8139cp 0000:01:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp 0000:01:06.0: Try the "8139too" driver instead. 8139too Fast Ethernet driver 0.9.28 eth1: RealTek RTL8139 at 0xffffc2000088c000, 00:13:f7:1a:94:2c, IRQ 5 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky console [netcon0] enabled netconsole: network logging started Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller NFORCE-CK804: IDE controller (0x10de:0x0053 rev 0xf2) at PCI slot 0000:00:06.0 NFORCE-CK804: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xe800-0xe807 Clocksource tsc unstable (delta = 900564343 ns) ide1: BM-DMA at 0xe808-0xe80f hda: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive hdb: Maxtor 7Y250P0, ATA DISK drive hda: UDMA/66 mode selected hdb: UDMA/133 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 isa bounce pool size: 16 pages ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide_generic: I/O resource 0x1F0-0x1F7 not free. ide_generic: I/O resource 0x170-0x177 not free. hdb: max request size: 512KiB hdb: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63 hdb: cache flushes supported hdb: hdb1 hdb3 hdb4 hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 5 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 5 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: qc timeout (cmd 0x27) ata1.00: failed to read native max address (err_mask=0x4) ata1.00: HPA support seems broken, skipping HPA handling ata1: failed to recover some devices, retrying in 5 secs ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA MAXTOR STM380211 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete ata1: limiting SATA link speed to 1.5 Gbps ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: limiting speed to UDMA/100:PIO4 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/100 ata1: EH complete ata1.00: limiting speed to UDMA/33:PIO4 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 00 00 00 sd 0:0:0:0: [sda] Add. Sense: No additional sense information end_request: I/O error, dev sda, sector 0 Buffer I/O error on device sda, logical block 0 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 00 00 00 sd 0:0:0:0: [sda] Add. Sense: No additional sense information end_request: I/O error, dev sda, sector 0 Buffer I/O error on device sda, logical block 0 ata1: EH complete unable to read partition table sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 11 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 11 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-8: SAMSUNG HD161HJ, GF100-07, max UDMA7 ata4.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD161HJ GF10 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 3:0:0:0: [sdb] Attached SCSI disk sd 3:0:0:0: Attached scsi generic sg1 type 0 ieee1394: raw1394: /dev/raw1394 device initialized ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: irq 5, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 3, io mem 0xfe02f000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected USB Universal Host Controller Interface driver v3.0 usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid1 personality registered for level 1 md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.16. intel8x0_measure_ac97_clock: measured 56000 usecs intel8x0: clocking to 48000 ALSA device list: #0: NVidia CK804 with ALC850 at irq 11 oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00) powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver. powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver. registered taskstats version 1 md: Autodetecting RAID arrays. md: Scanned 1 and added 1 devices. md: autorun ... md: considering sdb1 ... md: adding sdb1 ... md: created md0 md: bind md: running: raid1: raid set md0 active with 1 out of 2 mirrors md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 336k freed INIT: version 2.86 booting Gentoo Linux; http://www.gentoo.org/ Copyright 1999-2007 Gentoo Foundation; Distributed under the GPLv2 Press I to enter interactive boot mode * Mounting proc at /proc ... [ ok ] * Mounting sysfs at /sys ... [ ok ] * Mounting /dev ... [ ok ] * Starting udevd ... [ ok ] * Populating /dev with existing devices through uevents ...udevd[1064]: main: the kernel does not support inotify, udevd can't monitor rules file changes [ ok ] * Waiting for uevents to be processed ... [ ok ] * Mounting devpts at /dev/pts ... [ ok ] * Checking root filesystem .../dev/hdb3 has been mounted 39 times without being checked, check forced. /dev/hdb3: | | 0.3% /dev/hdb3: |= / 0.9% /dev/hdb3: |= - 1.9% /dev/hdb3: |== \ 2.8% /dev/hdb3: |== | 3.8% /dev/hdb3: |== / 4.4% /dev/hdb3: |=== - 4.7% /dev/hdb3: |=== \ 5.0% /dev/hdb3: |=== | 5.3% /dev/hdb3: |=== / 5.9% /dev/hdb3: |==== - 6.2% /dev/hdb3: |==== \ 6.9% /dev/hdb3: |==== | 7.2% /dev/hdb3: |==== / 7.5% /dev/hdb3: |==== - 7.8% /dev/hdb3: |===== \ 8.1% /dev/hdb3: |===== | 8.4% /dev/hdb3: |===== / 8.8% /dev/hdb3: |===== - 9.1% /dev/hdb3: |===== \ 9.4% /dev/hdb3: |===== | 9.7% /dev/hdb3: |====== / 10.0% /dev/hdb3: |====== - 10.3% /dev/hdb3: |====== \ 10.6% /dev/hdb3: |====== | 10.9% /dev/hdb3: |====== / 11.2% /dev/hdb3: |====== - 11.6% /dev/hdb3: |======= \ 11.9% /dev/hdb3: |======= | 12.2% /dev/hdb3: |======= / 12.8% /dev/hdb3: |======= - 13.1% /dev/hdb3: |======== \ 13.4% /dev/hdb3: |======== | 13.8% /dev/hdb3: |======== / 14.1% /dev/hdb3: |======== - 14.4% /dev/hdb3: |======== \ 14.7% /dev/hdb3: |======== | 15.0% /dev/hdb3: |========= / 15.3% /dev/hdb3: |========= - 15.6% /dev/hdb3: |========= \ 16.2% /dev/hdb3: |========= | 16.6% /dev/hdb3: |========== / 17.2% /dev/hdb3: |========== - 17.5% /dev/hdb3: |========== \ 17.8% /dev/hdb3: |========== | 18.4% /dev/hdb3: |=========== / 18.8% /dev/hdb3: |=========== - 19.1% /dev/hdb3: |=========== \ 19.4% /dev/hdb3: |=========== | 19.7% /dev/hdb3: |=========== / 20.3% /dev/hdb3: |============ - 20.6% /dev/hdb3: |============ \ 20.9% /dev/hdb3: |============ | 21.6% /dev/hdb3: |============ / 21.9% /dev/hdb3: |============ - 22.2% /dev/hdb3: |============= \ 22.5% /dev/hdb3: |============= | 22.8% /dev/hdb3: |============= / 23.4% /dev/hdb3: |============= - 24.1% /dev/hdb3: |============== \ 24.4% /dev/hdb3: |============== | 24.7% /dev/hdb3: |============== / 25.0% /dev/hdb3: |============== - 25.3% /dev/hdb3: |============== \ 25.6% /dev/hdb3: |=============== | 25.9% /dev/hdb3: |=============== / 26.2% /dev/hdb3: |=============== - 26.6% /dev/hdb3: |=============== \ 26.9% /dev/hdb3: |=============== | 27.2% /dev/hdb3: |=============== / 27.5% /dev/hdb3: |================ - 27.8% /dev/hdb3: |================ \ 28.1% /dev/hdb3: |================ | 28.4% /dev/hdb3: |================ / 28.8% /dev/hdb3: |================ - 29.1% /dev/hdb3: |================ \ 29.4% /dev/hdb3: |================= | 29.7% /dev/hdb3: |================= / 30.0% /dev/hdb3: |================= - 30.3% /dev/hdb3: |================= \ 30.6% /dev/hdb3: |================= | 30.9% /dev/hdb3: |================== / 31.2% /dev/hdb3: |================== - 31.6% /dev/hdb3: |================== \ 31.9% /dev/hdb3: |================== | 32.2% /dev/hdb3: |================== / 32.5% /dev/hdb3: |================== - 32.8% /dev/hdb3: |=================== \ 33.1% /dev/hdb3: |=================== | 33.4% /dev/hdb3: |=================== / 33.8% /dev/hdb3: |=================== - 34.1% /dev/hdb3: |=================== \ 34.4% /dev/hdb3: |=================== | 34.7% /dev/hdb3: |==================== / 35.0% /dev/hdb3: |==================== - 35.3% /dev/hdb3: |==================== \ 35.6% /dev/hdb3: |==================== | 35.9% /dev/hdb3: |==================== / 36.2% /dev/hdb3: |==================== - 36.6% /dev/hdb3: |===================== \ 36.9% /dev/hdb3: |===================== | 37.2% /dev/hdb3: |===================== / 37.5% /dev/hdb3: |===================== - 37.8% /dev/hdb3: |===================== \ 38.1% /dev/hdb3: |====================== | 38.4% /dev/hdb3: |====================== / 38.8% /dev/hdb3: |====================== - 39.1% /dev/hdb3: |====================== \ 39.4% /dev/hdb3: |====================== | 39.7% /dev/hdb3: |====================== / 40.0% /dev/hdb3: |======================= - 40.3% /dev/hdb3: |======================= \ 40.6% /dev/hdb3: |======================= | 40.9% /dev/hdb3: |======================= / 41.2% /dev/hdb3: |======================= - 41.6% /dev/hdb3: |======================= \ 41.9% /dev/hdb3: |======================== | 42.2% /dev/hdb3: |======================== / 42.5% /dev/hdb3: |======================== - 42.8% /dev/hdb3: |======================== \ 43.1% /dev/hdb3: |======================== | 43.4% /dev/hdb3: |========================= / 43.8% /dev/hdb3: |========================= - 44.1% /dev/hdb3: |========================= \ 44.4% /dev/hdb3: |========================= | 44.7% /dev/hdb3: |========================= / 45.0% /dev/hdb3: |========================= - 45.3% /dev/hdb3: |========================== \ 45.6% /dev/hdb3: |========================== | 46.2% /dev/hdb3: |========================== / 46.9% /dev/hdb3: |=========================== - 47.5% /dev/hdb3: |=========================== \ 48.1% /dev/hdb3: |=========================== | 48.8% /dev/hdb3: |============================ / 49.4% /dev/hdb3: |============================ - 50.0% /dev/hdb3: |============================= \ 50.9% /dev/hdb3: |============================= | 51.6% /dev/hdb3: |============================= / 52.5% /dev/hdb3: |============================== - 53.1% /dev/hdb3: |============================== \ 54.1% /dev/hdb3: |=============================== | 55.0% /dev/hdb3: |=============================== / 55.6% /dev/hdb3: |================================ - 56.6% /dev/hdb3: |================================ \ 57.2% /dev/hdb3: |================================= | 58.1% /dev/hdb3: |================================= / 58.8% /dev/hdb3: |================================= - 59.4% /dev/hdb3: |================================== \ 60.3% /dev/hdb3: |================================== | 60.9% /dev/hdb3: |================================== / 61.2% /dev/hdb3: |=================================== - 61.9% /dev/hdb3: |=================================== \ 62.8% /dev/hdb3: |=================================== | 63.1% /dev/hdb3: |==================================== / 63.8% /dev/hdb3: |==================================== - 64.7% /dev/hdb3: |===================================== \ 65.3% /dev/hdb3: |===================================== | 65.6% /dev/hdb3: |===================================== / 66.6% /dev/hdb3: |====================================== - 67.2% /dev/hdb3: |====================================== \ 68.1% /dev/hdb3: |======================================= | 68.8% /dev/hdb3: |======================================= / 69.7% /dev/hdb3: |======================================= - 70.1% /dev/hdb3: |======================================= \ 70.3% /dev/hdb3: |======================================= | 70.4% /dev/hdb3: |======================================= / 70.5% /dev/hdb3: |======================================== - 70.6% /dev/hdb3: |======================================== \ 70.8% /dev/hdb3: |======================================== | 71.0% /dev/hdb3: |======================================== / 71.1% /dev/hdb3: |======================================== - 71.2% /dev/hdb3: |======================================== \ 71.3% /dev/hdb3: |======================================== | 71.4% /dev/hdb3: |======================================== / 71.5% /dev/hdb3: |======================================== - 71.8% /dev/hdb3: |======================================== \ 71.9% /dev/hdb3: |======================================== | 72.0% /dev/hdb3: |======================================== / 72.2% /dev/hdb3: |======================================== - 72.3% /dev/hdb3: |========================================= \ 72.5% /dev/hdb3: |========================================= | 72.6% /dev/hdb3: |========================================= / 72.8% /dev/hdb3: |========================================= - 72.9% /dev/hdb3: |========================================= \ 73.0% /dev/hdb3: |========================================= | 73.1% /dev/hdb3: |========================================= / 73.2% /dev/hdb3: |========================================= - 73.4% /dev/hdb3: |========================================= \ 73.6% /dev/hdb3: |========================================= | 73.7% /dev/hdb3: |========================================= / 73.9% /dev/hdb3: |========================================= - 74.1% /dev/hdb3: |========================================== \ 74.3% /dev/hdb3: |========================================== | 74.4% /dev/hdb3: |========================================== / 74.6% /dev/hdb3: |========================================== - 74.7% /dev/hdb3: |========================================== \ 74.9% /dev/hdb3: |========================================== | 75.1% /dev/hdb3: |========================================== / 75.2% /dev/hdb3: |========================================== - 75.3% /dev/hdb3: |========================================== \ 75.5% /dev/hdb3: |========================================== | 75.7% /dev/hdb3: |========================================== / 75.9% /dev/hdb3: |=========================================== - 76.0% /dev/hdb3: |=========================================== \ 76.2% /dev/hdb3: |=========================================== | 76.3% /dev/hdb3: |=========================================== / 76.5% /dev/hdb3: |=========================================== - 76.6% /dev/hdb3: |=========================================== \ 76.8% /dev/hdb3: |=========================================== | 77.0% /dev/hdb3: |=========================================== / 77.1% /dev/hdb3: |=========================================== - 77.3% /dev/hdb3: |=========================================== \ 77.4% /dev/hdb3: |=========================================== | 77.6% /dev/hdb3: |=========================================== / 77.7% /dev/hdb3: |============================================ - 77.8% /dev/hdb3: |============================================ \ 78.0% /dev/hdb3: |============================================ | 78.1% /dev/hdb3: |============================================ / 78.3% /dev/hdb3: |============================================ - 78.5% /dev/hdb3: |============================================ \ 78.6% /dev/hdb3: |============================================ | 78.8% /dev/hdb3: |============================================ / 78.9% /dev/hdb3: |============================================ - 79.1% /dev/hdb3: |============================================ \ 79.2% /dev/hdb3: |============================================ | 79.3% /dev/hdb3: |============================================ / 79.5% /dev/hdb3: |============================================= - 79.6% /dev/hdb3: |============================================= \ 79.8% /dev/hdb3: |============================================= | 79.9% /dev/hdb3: |============================================= / 80.1% /dev/hdb3: |============================================= - 80.2% /dev/hdb3: |============================================= \ 80.4% /dev/hdb3: |============================================= | 80.6% /dev/hdb3: |============================================= / 80.8% /dev/hdb3: |============================================= - 80.9% /dev/hdb3: |============================================= \ 81.1% /dev/hdb3: |============================================== | 81.3% /dev/hdb3: |============================================== / 81.5% /dev/hdb3: |============================================== - 81.6% /dev/hdb3: |============================================== \ 81.8% /dev/hdb3: |============================================== | 82.0% /dev/hdb3: |============================================== / 82.1% /dev/hdb3: |============================================== - 82.3% /dev/hdb3: |============================================== \ 82.4% /dev/hdb3: |============================================== | 82.6% /dev/hdb3: |============================================== / 82.7% /dev/hdb3: |============================================== - 82.9% /dev/hdb3: |=============================================== \ 83.1% /dev/hdb3: |=============================================== | 83.2% /dev/hdb3: |=============================================== / 83.4% /dev/hdb3: |=============================================== - 83.5% /dev/hdb3: |=============================================== \ 83.6% /dev/hdb3: |=============================================== | 83.7% /dev/hdb3: |=============================================== / 83.9% /dev/hdb3: |=============================================== - 84.0% /dev/hdb3: |=============================================== \ 84.2% /dev/hdb3: |=============================================== | 84.3% /dev/hdb3: |=============================================== / 84.5% /dev/hdb3: |=============================================== - 84.6% /dev/hdb3: |=============================================== \ 84.7% /dev/hdb3: |================================================ | 84.9% /dev/hdb3: |================================================ / 85.0% /dev/hdb3: |================================================ - 85.2% /dev/hdb3: |================================================ \ 85.4% /dev/hdb3: |================================================ | 85.5% /dev/hdb3: |================================================ / 85.7% /dev/hdb3: |================================================ - 85.8% /dev/hdb3: |================================================ \ 86.0% /dev/hdb3: |================================================ | 86.1% /dev/hdb3: |================================================ / 86.3% /dev/hdb3: |================================================ - 86.4% /dev/hdb3: |================================================ \ 86.6% /dev/hdb3: |================================================= | 86.8% /dev/hdb3: |================================================= / 86.9% /dev/hdb3: |================================================= - 87.0% /dev/hdb3: |================================================= \ 87.1% /dev/hdb3: |================================================= | 87.2% /dev/hdb3: |================================================= / 87.3% /dev/hdb3: |================================================= - 87.4% /dev/hdb3: |================================================= \ 87.5% /dev/hdb3: |================================================= | 87.7% /dev/hdb3: |================================================= / 87.8% /dev/hdb3: |================================================= - 87.9% /dev/hdb3: |================================================= \ 88.0% /dev/hdb3: |================================================= | 88.1% /dev/hdb3: |================================================= / 88.2% /dev/hdb3: |================================================= - 88.3% /dev/hdb3: |================================================== \ 88.5% /dev/hdb3: |================================================== | 88.6% /dev/hdb3: |================================================== / 88.7% /dev/hdb3: |================================================== - 88.9% /dev/hdb3: |================================================== \ 89.0% /dev/hdb3: |================================================== | 89.1% /dev/hdb3: |================================================== / 89.2% /dev/hdb3: |================================================== - 89.3% /dev/hdb3: |================================================== \ 89.4% /dev/hdb3: |================================================== | 89.5% /dev/hdb3: |================================================== / 89.6% /dev/hdb3: |================================================== - 89.7% /dev/hdb3: |================================================== \ 89.8% /dev/hdb3: |================================================== | 89.9% /dev/hdb3: |================================================== / 90.0% /dev/hdb3: |================================================== - 90.1% /dev/hdb3: |==================================================== \ 93.4% /dev/hdb3: |===================================================== | 95.1% /dev/hdb3: |====================================================== / 97.2% /dev/hdb3: |========================================================| 100.0% /dev/hdb3: 422097/1831424 files (3.5% non-contiguous), 2324483/7325632 blocks [ ok ] * Remounting root filesystem read/write ... [ ok ] * Setting up the Logical Volume Manager ... [ ok ] * Setting up dm-crypt mappings ... [ ok ] * Checking all filesystems .../dev/md0: clean, 26231/4890624 files, 6248029/19537024 blocks [ ok ] * Mounting local filesystems ... [ ok ] * Mounting USB device filesystem (usbfs) ... [ ok ] * Mounting security filesystem ... [ ok ] * Activating (possible) swap ... [ ok ] * Setting up dm-crypt mappings ... [ ok ] * Setting system clock using the hardware clock [Local Time] ... [ ok ] * Configuring kernel parameters ... [ ok ] * Updating environment ... [ ok ] * Cleaning /var/lock, /var/run ... [ ok ] * Wiping /tmp directory ... [ ok ] * Device initiated services: udev-postmount * Setting hostname to Avalon ... [ ok ] * Loading ALSA modules ... [ ok ] * Restoring Mixer Levels ... [ ok ] * Loading key mappings ... [ ok ] * Setting terminal encoding to UTF-8 ... [ ok ] * Setting user font ... [ ok ] * The mdraid init script is written for baselayout-2 * Please do not use it with baselayout-1 * Starting lo * Bringing up lo * 127.0.0.1/8 [ ok ] * Adding routes * 127.0.0.0/8 ... [ ok ] * Initializing random number generator ... [ ok ] INIT: Entering runlevel: 3 * Starting syslog-ng ... [ ok ] * Starting eth0 * Bringing up eth0 * 192.168.0.34 [ ok ] * Adding routes * default via 192.168.0.65 ... [ ok ] * Mounting network filesystems ... [ ok ] which: no kdm in (/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/sbin:/bin:/usr/bin:/sbin:/usr/sbin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.1.2:/usr/kde/3.5/sbin:/usr/kde/3.5/bin:/usr/qt/3/bin) * Setting up xdm ...start-stop-daemon: stat /usr/bin/xdm: No such file or directory (No such file or directory) * ERROR: could not start the Display Manager [ ok ] * The mdraid init script is written for baselayout-2 * Please do not use it with baselayout-1 * Starting ntpd ... [ ok ] * Starting sshd ... [ ok ] * Starting vixie-cron ... [ ok ] * Starting local ... [ ok ] This is Avalon (Linux x86_64 2.6.26-gentoo-r3) 16:26:07 Avalon login: igor Password: Last login: Sun Dec 7 15:50:25 EET 2008 on tty2 igor@Avalon ~ $ cat   sudo cat /proc/interrupts Password: CPU0 CPU1 0: 53 0 IO-APIC-edge timer 1: 0 2 IO-APIC-edge i8042 2: 0 0 XT-PIC-XT cascade 3: 2 4969 IO-APIC-fasteoi ohci_hcd:usb2, eth0 4: 13 1937 IO-APIC-edge serial 5: 7 166 IO-APIC-fasteoi sata_nv, ehci_hcd:usb1 7: 1 0 IO-APIC-edge 8: 0 0 IO-APIC-edge rtc 11: 9009 320177391 IO-APIC-fasteoi sata_nv, NVidia CK804 12: 1 3 IO-APIC-edge i8042 14: 19 47090 IO-APIC-edge ide0 15: 0 0 IO-APIC-edge ide1 NMI: 0 0 Non-maskable interrupts LOC: 267774 266777 Local timer interrupts RES: 3081 3244 Rescheduling interrupts CAL: 44 69 function call interrupts TLB: 430 297 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts SPU: 0 0 Spurious interrupts ERR: 1 igor@Avalon ~ $ sudo dmesg Linux version 2.6.26-gentoo-r3 (root@Avalon) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #2 SMP Mon Nov 24 20:28:44 EET 2008 Command line: root=/dev/hdb3 irqpoll console=tty0 console=ttyS0,9600 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 524000) 1 entries of 3200 used max_pfn_mapped = 1048576 init_memory_mapping DMI 2.4 present. Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000007fee0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 524000) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000007fee0000 NODE_DATA [0000000000001000 - 0000000000004fff] bootmap [000000000000c000 - 000000000001bfdf] pages 10 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] TRAMPOLINE early res: 2 [200000-814b8b] TEXT DATA BSS early res: 3 [9f000-fffff] BIOS reserved early res: 4 [8000-bfff] PGTABLE [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 524000 On node 0 totalpages: 523903 DMA zone: 56 pages used for memmap DMA zone: 1662 pages reserved DMA zone: 2281 pages, LIFO batch:0 DMA32 zone: 7109 pages used for memmap DMA32 zone: 512795 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: OEM00000 Product ID: PROD00000000 <6>MPTABLE: Product ID: PROD00000000 <6>MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) Processor #1 I/O APIC #2 Version 17 at 0xFEC00000. Setting APIC routing to flat Processors: 2 Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 35120 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 2 Built 1 zonelists in Node order, mobility grouping on. Total pages: 515076 Policy zone: DMA32 Kernel command line: root=/dev/hdb3 irqpoll console=tty0 console=ttyS0,9600 Misrouted IRQ fixup and polling support enabled This may significantly impact system performance Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PIT Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2211.358 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled Checking aperture... Node 0: aperture @ e220000000 size 32 MB Aperture beyond 4GB. Ignoring. No AGP bridge found Memory: 2060212k/2096000k available (3167k kernel code, 35400k reserved, 1797k data, 336k init) CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay using timer specific routine.. 4463.13 BogoMIPS (lpj=8926278) Security Framework initialized Capability LSM initialized Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ExtINT not setup in hardware but reported by MP table CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 Using local APIC timer interrupts. APIC timer calibration result 12564533 Detected 12.564 MHz APIC timer. Booting processor 1/1 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4422.83 BogoMIPS (lpj=8845669) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 Brought up 2 CPUs Total of 2 processors activated (8885.97 BogoMIPS). net_namespace: 568 bytes NET: Registered protocol family 16 node 0 link 0: io port [a000, ffff] TOM: 0000000080000000 aka 2048M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [feb00000, fec0ffff] node 0 link 0: mmio [80000000, dfffffff] node 0 link 0: mmio [f0000000, fe02ffff] node 0 link 0: mmio [e0000000, e05fffff] bus: [00,05] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [fe030000, fcffffffff] bus: 00 index 3 mmio: [80000000, efffffff] bus: 00 index 4 mmio: [f0000000, fe02ffff] PCI: Using configuration type 1 for base access SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 11 PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 3 PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 5 PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 11 PCI->APIC IRQ transform: 0000:00:07.0[A] -> IRQ 5 PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 11 PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 3 PCI->APIC IRQ transform: 0000:01:06.0[A] -> IRQ 5 PCI->APIC IRQ transform: 0000:05:00.0[A] -> IRQ 3 PCI: Bridge: 0000:00:09.0 IO window: a000-afff MEM window: 0xfdf00000-0xfdffffff PREFETCH window: 0x0000000080000000-0x00000000800fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: 0xfa000000-0xfcffffff PREFETCH window: 0x00000000d0000000-0x00000000dfffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Total HugeTLB memory allocated, 0 fuse init (API version 7.9) msgmni has been set to 4023 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Found enabled HT MSI Mapping pci 0000:00:0c.0: Enabling HT MSI Mapping pci 0000:00:0c.0: Found enabled HT MSI Mapping pci 0000:00:0d.0: Enabling HT MSI Mapping pci 0000:00:0d.0: Found enabled HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Found enabled HT MSI Mapping pci 0000:05:00.0: Boot video device PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Real Time Clock Driver v1.12ac Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1374 @ 0, addr 00:18:f3:7e:24:64 forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) 8139cp 0000:01:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp 0000:01:06.0: Try the "8139too" driver instead. 8139too Fast Ethernet driver 0.9.28 eth1: RealTek RTL8139 at 0xffffc2000088c000, 00:13:f7:1a:94:2c, IRQ 5 eth1: Identified 8139 chip type 'RTL-8100B/8139D' tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky console [netcon0] enabled netconsole: network logging started Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller NFORCE-CK804: IDE controller (0x10de:0x0053 rev 0xf2) at PCI slot 0000:00:06.0 NFORCE-CK804: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xe800-0xe807 Clocksource tsc unstable (delta = 900564343 ns) ide1: BM-DMA at 0xe808-0xe80f Probing IDE interface ide0... hda: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive hdb: Maxtor 7Y250P0, ATA DISK drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/66 mode selected hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/133 mode selected Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 isa bounce pool size: 16 pages ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide_generic: I/O resource 0x1F0-0x1F7 not free. ide_generic: I/O resource 0x170-0x177 not free. hdb: max request size: 512KiB hdb: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63 hdb: cache flushes supported hdb: hdb1 hdb3 hdb4 hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods sata_nv 0000:00:07.0: version 3.5 PCI: Setting latency timer of device 0000:00:07.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 5 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 5 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: qc timeout (cmd 0x27) ata1.00: failed to read native max address (err_mask=0x4) ata1.00: HPA support seems broken, skipping HPA handling ata1: failed to recover some devices, retrying in 5 secs ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA MAXTOR STM380211 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/133 ata1: EH complete ata1: limiting SATA link speed to 1.5 Gbps ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: limiting speed to UDMA/100:PIO4 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/100 ata1: EH complete ata1.00: limiting speed to UDMA/33:PIO4 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 00 00 00 sd 0:0:0:0: [sda] Add. Sense: No additional sense information end_request: I/O error, dev sda, sector 0 Buffer I/O error on device sda, logical block 0 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 00 00 00 sd 0:0:0:0: [sda] Add. Sense: No additional sense information end_request: I/O error, dev sda, sector 0 Buffer I/O error on device sda, logical block 0 ata1: EH complete unable to read partition table sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 PCI: Setting latency timer of device 0000:00:08.0 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 11 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 11 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-8: SAMSUNG HD161HJ, GF100-07, max UDMA7 ata4.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD161HJ GF10 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 3:0:0:0: [sdb] Attached SCSI disk sd 3:0:0:0: Attached scsi generic sg1 type 0 ieee1394: raw1394: /dev/raw1394 device initialized PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 5, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 3, io mem 0xfe02f000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected USB Universal Host Controller Interface driver v3.0 usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid1 personality registered for level 1 md: multipath personality registered for level -4 md: faulty personality registered for level -5 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.16. PCI: Setting latency timer of device 0000:00:04.0 to 64 intel8x0_measure_ac97_clock: measured 56000 usecs intel8x0: clocking to 48000 ALSA device list: #0: NVidia CK804 with ALC850 at irq 11 oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00) powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver. powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver. registered taskstats version 1 md: Autodetecting RAID arrays. md: Scanned 1 and added 1 devices. md: autorun ... md: considering sdb1 ... md: adding sdb1 ... md: created md0 md: bind md: running: raid1: raid set md0 active with 1 out of 2 mirrors md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 336k freed nvidia: module license 'NVIDIA' taints kernel. PCI: Setting latency timer of device 0000:05:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.09 Wed Jun 4 23:40:50 PDT 2008 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete INFO: task lvm:2031 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. lvm D ffffffff805292c0 0 2031 1024 ffff81007dc0bc38 0000000000000082 0000000000000000 ffff81007e464800 ffff81007e659310 ffff81007fb74690 ffff81007e659588 000000018033bfab 00000000ffffffff ffff81007dc9ed78 0000000000000000 0000000000000000 Call Trace: [] io_schedule+0x5c/0x9e [] __blockdev_direct_IO+0x891/0x9fa [] blkdev_direct_IO+0x45/0x4a [] blkdev_get_blocks+0x0/0x96 [] generic_file_aio_read+0xa0/0x4c6 [] do_open+0x20e/0x294 [] blkdev_ioctl+0x60c/0x68a [] blkdev_open+0x0/0x5d [] do_sync_read+0xc9/0x10c [] autoremove_wake_function+0x0/0x2e [] block_ioctl+0x1b/0x1f [] vfs_ioctl+0x21/0x6b [] mutex_lock+0xd/0x1e [] vfs_read+0x99/0xe2 [] sys_read+0x45/0x6e [] system_call_after_swapgs+0x7b/0x80 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete INFO: task ata_aux:100 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ata_aux D ffffffff805292c0 0 100 2 ffff81007f0f9b70 0000000000000046 0000000000000000 ffffffff803b22e3 ffff81007f0f5310 ffff81007fb74690 ffff81007f0f5588 00000001803b23d7 00000000ffffffff ffff81007dc9ec48 0000000000000000 0000000000000000 Call Trace: [] __scsi_get_command+0x10/0x86 [] schedule_timeout+0x1e/0xad [] elv_next_request+0xd2/0x193 [] kobject_get+0x12/0x17 [] wait_for_common+0xcd/0x137 [] default_wake_function+0x0/0xe [] blk_execute_rq+0x98/0xb8 [] get_request_wait+0xce/0xe6 [] scsi_execute+0xda/0x115 [] scsi_execute_req+0xb9/0xde [] sd_revalidate_disk+0x12a/0x111e [] blk_rq_map_user+0x134/0x1c3 [] kobject_get+0x12/0x17 [] sd_rescan+0x1a/0x25 [] ata_scsi_dev_rescan+0xa7/0x150 [] ata_scsi_dev_rescan+0x0/0x150 [] run_workqueue+0x7b/0x103 [] worker_thread+0x90/0x9b [] autoremove_wake_function+0x0/0x2e [] worker_thread+0x0/0x9b [] kthread+0x47/0x74 [] schedule_tail+0x27/0x5c [] child_rip+0xa/0x12 [] kthread+0x0/0x74 [] child_rip+0x0/0x12 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete INFO: task lvm:2031 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. lvm D ffffffff805292c0 0 2031 1024 ffff81007dc0bc38 0000000000000082 0000000000000000 ffff81007e464800 ffff81007e659310 ffff81007fb74690 ffff81007e659588 000000018033bfab 00000000ffffffff ffff81007dc9ed78 0000000000000000 0000000000000000 Call Trace: [] io_schedule+0x5c/0x9e [] __blockdev_direct_IO+0x891/0x9fa [] blkdev_direct_IO+0x45/0x4a [] blkdev_get_blocks+0x0/0x96 [] generic_file_aio_read+0xa0/0x4c6 [] do_open+0x20e/0x294 [] blkdev_ioctl+0x60c/0x68a [] blkdev_open+0x0/0x5d [] do_sync_read+0xc9/0x10c [] autoremove_wake_function+0x0/0x2e [] block_ioctl+0x1b/0x1f [] vfs_ioctl+0x21/0x6b [] mutex_lock+0xd/0x1e [] vfs_read+0x99/0xe2 [] sys_read+0x45/0x6e [] system_call_after_swapgs+0x7b/0x80 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete INFO: task ata_aux:100 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ata_aux D ffffffff805292c0 0 100 2 ffff81007f0f9b70 0000000000000046 0000000000000000 ffffffff803b22e3 ffff81007f0f5310 ffff81007fb74690 ffff81007f0f5588 00000001803b23d7 00000000ffffffff ffff81007dc9ec48 0000000000000000 0000000000000000 Call Trace: [] __scsi_get_command+0x10/0x86 [] schedule_timeout+0x1e/0xad [] elv_next_request+0xd2/0x193 [] kobject_get+0x12/0x17 [] wait_for_common+0xcd/0x137 [] default_wake_function+0x0/0xe [] blk_execute_rq+0x98/0xb8 [] get_request_wait+0xce/0xe6 [] scsi_execute+0xda/0x115 [] scsi_execute_req+0xb9/0xde [] sd_revalidate_disk+0x12a/0x111e [] blk_rq_map_user+0x134/0x1c3 [] kobject_get+0x12/0x17 [] sd_rescan+0x1a/0x25 [] ata_scsi_dev_rescan+0xa7/0x150 [] ata_scsi_dev_rescan+0x0/0x150 [] run_workqueue+0x7b/0x103 [] worker_thread+0x90/0x9b [] autoremove_wake_function+0x0/0x2e [] worker_thread+0x0/0x9b [] kthread+0x47/0x74 [] schedule_tail+0x27/0x5c [] child_rip+0xa/0x12 [] kthread+0x0/0x74 [] child_rip+0x0/0x12 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA usb 2-1: new full speed USB device using ohci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected usb 2-1.3: new low speed USB device using ohci_hcd and address 3 usb 2-1.3: configuration #1 chosen from 1 choice input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input0 input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1.3 usb 2-1.4: new low speed USB device using ohci_hcd and address 4 usb 2-1.4: configuration #1 chosen from 1 choice input: CHICONY HP Basic USB Keyboard as /class/input/input1 input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:02.0-1.4 usb 2-1: USB disconnect, address 2 usb 2-1.3: USB disconnect, address 3 usb 2-1.4: USB disconnect, address 4 EXT3 FS on hdb3, internal journal ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/33 ata1: EH complete INFO: task pvscan:2205 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. pvscan D ffffffff805292c0 0 2205 2200 ffff810047c7fc38 0000000000000086 0000000000000000 ffff81007e464800 ffff810047c46690 ffff81007fb74690 ffff810047c46908 000000018033bfab 00000000ffffffff ffff81007f0863f8 0000000000000000 0000000000000000 Call Trace: [] io_schedule+0x5c/0x9e [] __blockdev_direct_IO+0x891/0x9fa [] blkdev_direct_IO+0x45/0x4a [] blkdev_get_blocks+0x0/0x96 [] generic_file_aio_read+0xa0/0x4c6 [] do_open+0x20e/0x294 [] blkdev_ioctl+0x60c/0x68a [] blkdev_open+0x0/0x5d [] do_sync_read+0xc9/0x10c [] autoremove_wake_function+0x0/0x2e [] block_ioctl+0x1b/0x1f [] vfs_ioctl+0x21/0x6b [] mutex_lock+0xd/0x1e [] vfs_read+0x99/0xe2 [] sys_read+0x45/0x6e [] system_call_after_swapgs+0x7b/0x80 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA usb 2-1: new full speed USB device using ohci_hcd and address 5 kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2996112k swap on /dev/hdb1. Priority:-1 extents:1 across:2996112k usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected usb 2-1.3: new low speed USB device using ohci_hcd and address 6 usb 2-1.3: configuration #1 chosen from 1 choice input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input2 input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1.3 usb 2-1.4: new low speed USB device using ohci_hcd and address 7 usb 2-1.4: configuration #1 chosen from 1 choice input: CHICONY HP Basic USB Keyboard as /class/input/input3 input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:02.0-1.4 usb 2-1: USB disconnect, address 5 usb 2-1.3: USB disconnect, address 6 usb 2-1.4: USB disconnect, address 7 eth0: no IPv6 routers present igor@Avalon ~ $ sudo fdisk -l Disk /dev/hdb: 251.0 GB, 251000193024 bytes 255 heads, 63 sectors/track, 30515 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x34101895 Device Boot Start End Blocks Id System /dev/hdb1 30143 30515 2996122+ 82 Linux swap / Solaris /dev/hdb3 * 1 3648 29302528+ 83 Linux /dev/hdb4 3649 30142 212813055 83 Linux Partition table entries are not in disk order Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0003029d Device Boot Start End Blocks Id System /dev/sda1 1 9729 78148161 fd Linux raid autodetect Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 9729 78148161 fd Linux raid autodetect /dev/sdb2 9730 19457 78140160 83 Linux igor@Avalon ~ $ igor@Avalon ~ $ sudo mdadm --detail /dev/md  0 /dev/md0: Version : 00.90.03 Creation Time : Wed Oct 22 22:25:08 2008 Raid Level : raid1 Array Size : 78148096 (74.53 GiB 80.02 GB) Used Dev Size : 78148096 (74.53 GiB 80.02 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Sun Dec 7 16:29:14 2008 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 UUID : 3fff4b2a:becd3be1:e368bf24:bd0fce41 Events : 0.344348 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed igor@Avalon ~ $ sudo mdadm --add * /dev/md0 /dev/sda1 mdadm: cannot find /dev/sda1: No such file or directory igor@Avalon ~ $ sudo mdadm --add /dev/md0 /dev/sda1detail /dev/md0fdisk -l Disk /dev/hdb: 251.0 GB, 251000193024 bytes 255 heads, 63 sectors/track, 30515 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x34101895 Device Boot Start End Blocks Id System /dev/hdb1 30143 30515 2996122+ 82 Linux swap / Solaris /dev/hdb3 * 1 3648 29302528+ 83 Linux /dev/hdb4 3649 30142 212813055 83 Linux Partition table entries are not in disk order     igor@Avalon ~ $ igor@Avalon ~ $ sudo fdisk /des v/sdb The number of cylinders for this disk is set to 19457. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 9729 78148161 fd Linux raid autodetect /dev/sdb2 9730 19457 78140160 83 Linux Command (m for help): exit e: unknown command Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): q igor@Avalon ~ $ sudo fdisk /dev/sdb a