dmesg output

dmesg (text/plain), 12.72 KB, created by Laurent CREPET on 2004-12-13 02:19:17 UTC

Linux version 2.6.9-gentoo-r1 (root@inertia) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #1 SMP Tue Nov 2 23:34:17 UTC 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fe8ac00 (usable)
 BIOS-e820: 000000003fe8ac00 - 000000003fe8cc00 (ACPI NVS)
 BIOS-e820: 000000003fe8cc00 - 000000003fe8ec00 (ACPI data)
 BIOS-e820: 000000003fe8ec00 - 0000000040000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
126MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
On node 0 totalpages: 261770
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 32394 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 DELL                                  ) @ 0x000febf0
ACPI: RSDT (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fcb98
ACPI: FADT (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fcbd8
ACPI: SSDT (v001   DELL    st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffc4413
ACPI: MADT (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fcc4c
ACPI: BOOT (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fccd6
ACPI: ASF! (v016 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fccfe
ACPI: MCFG (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fcd65
ACPI: HPET (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fcda3
ACPI: DSDT (v001   DELL    dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: DELL     Product ID: WS 470       APIC at: 0xFEE00000
I/O APIC #8 Version 32 at 0xFEC00000.
I/O APIC #9 Version 32 at 0xFEC80000.
I/O APIC #10 Version 32 at 0xFEC80800.
Enabling APIC mode:  Flat.  Using 3 I/O APICs
Processors: 1
Built 1 zonelists
Kernel command line: initrd=gentoo.igz root=/dev/ram0 init=/linuxrc acpi=ht looptype=squashfs loop=/livecd.squashfs udev nodevfs cdroot vga=791 dokeymap splash=silent,theme:livecd-2004.3 BOOT_IMAGE=gentoo 
fbsplash: silent
fbsplash: theme livecd-2004.3
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2794.621 MHz processor.
Using tsc for high-res timesource
Speakup v-2.00 CVS: Wed Oct 20 14:26:13 EDT 2004 : initialized
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1031828k/1047080k available (2288k kernel code, 14612k reserved, 539k data, 576k init, 129576k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5521.40 BogoMIPS (lpj=2760704)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Couldn't initialize miscdevice /dev/synth.
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps:  bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps:        bfebfbff 20100000 00000000 00000080
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
per-CPU timeslice cutoff: 2926.23 usecs.
task migration cache decay timeout: 3 msecs.
Total of 1 processors activated (5521.40 BogoMIPS).
WARNING: 1 siblings found for CPU0, should be 2
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=0
Brought up 1 CPUs
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1611k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfb5fc, last bus=6
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fe2d0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe2f4, dseg 0x40
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P2) -> 18
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B0,I31,P0) -> 18
PCI->APIC IRQ transform: (B0,I31,P0) -> 18
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B3,I13,P0) -> 49
PCI->APIC IRQ transform: (B3,I13,P1) -> 50
PCI->APIC IRQ transform: (B3,I14,P0) -> 48
PCI->APIC IRQ transform: (B5,I0,P0) -> 16
pnp: 00:00: ioport range 0x800-0x8df could not be reserved
pnp: 00:00: ioport range 0xc00-0xc7f has been reserved
Simple Boot Flag value 0x87 read from CMOS RAM was invalid
Simple Boot Flag at 0x7a set to 0x1
highmem bounce pool size: 64 pages
devfs: 2004-01-31 Richard Gooch ([e-mail])
devfs: boot_options: 0x0
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
inotify init: minor=63
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fbsplash: console 0 using theme 'livecd-2004.3'
fbsplash: switched splash state to 'on' on console 0
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide1...
hdc: JLMS DVD-ROM XJ-HD166, ATAPI CD/DVD-ROM drive
Using deadline io scheduler
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide0...
ide0: Wait for ready failed before probe !
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
CAPI Subsystem Rev 1.1.2.8
EISA: Probing bus 0 at eisa0
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 576k freed
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 23, pci mem f881c800
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 16, io base 0000ff80
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 19, io base 0000ff60
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 18, io base 0000ff40
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 16, io base 0000ff20
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1219 $ Ben Collins <[e-mail]>
usb 4-1: new low speed USB device using address 2
ReiserFS: hdc: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdc
VFS: Can't find ext3 filesystem on dev hdc.
VFS: Can't find ext2 filesystem on dev hdc.
SQUASHFS error: Can't find a SQUASHFS superblock on hdc
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev hdc.
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.2-1
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
fbsplash: switching to verbose mode
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
e1000: Ignoring new-style parameters in presence of obsolete ones
Intel(R) PRO/1000 Network Driver - version 5.3.19-k2
Copyright (c) 1999-2004 Intel Corporation.
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
kobject_register failed for aic79xx (-17)
 [<c023b9bf>]
 [<c029d307>]
 [<c029d772>]
 [<c0243ba9>]
 [<f8d6339e>]
 [<f8d5d553>]
 [<f882c00a>]
 [<c012aa1f>]
 [<c01050e7>]
libata version 1.02 loaded.
Unable to handle kernel paging request at virtual address f8d74cbc
 printing eip:
c023b935
*pde = 1fca9067
*pte = 00000000
Oops: 0002 [#1]
SMP 
Modules linked in: ata_piix libata evdev e1000 parport_pc parport sbp2 ohci1394 ieee1394 ohci_hcd uhci_hcd usb_storage ehci_hcd
CPU:    0
EIP:    0060:[<c023b935>]    Not tainted VLI
EFLAGS: 00010296   (2.6.9-gentoo-r1) 
eax: c03a29e4   ebx: f887e220   ecx: f8d74cbc   edx: f887e23c
esi: c03a29ec   edi: f887e204   ebp: 00000000   esp: f7e8ff50
ds: 007b   es: 007b   ss: 0068
Process modprobe (pid: 3391, threadinfo=f7e8e000 task=f7fd2e70)
Stack: f887e220 ffffffea f887e204 c023b9a5 f887e220 f887e220 f887e220 c03a2980 
       c029d307 f887e220 f887e1e0 00000000 f887e280 f7e8e000 c029d772 f887e204 
       c0243ba9 f887e204 c0398560 f887e460 c0398544 f882c00a f887e1e0 c012aa1f 
Call Trace:
 [<c023b9a5>]
 [<c029d307>]
 [<c029d772>]
 [<c0243ba9>]
 [<f882c00a>]
 [<c012aa1f>]
 [<c01050e7>]
Code: 0f 85 1a 04 00 00 85 f6 75 0f 8b 43 28 83 c0 10 50 e8 98 01 00 00 89 c6 58 8b 43 28 83 c0 08 8b 48 04 8d 53 1c 89 43 1c 89 50 04 <89> 11 89 4a 04 8b 43 28 8b 38 8d 4f 48 89 c8 ba ff ff 00 00 f0 
 <6>e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
fbsplash: console 11 using theme 'livecd-2004.3'
fbsplash: switched splash state to 'on' on console 11