dmesg output

dmesg (text/plain), 44.91 KB, created by Mohamed Hazem on 2009-11-11 16:25:36 UTC

Linux version 2.6.30-gentoo-r8-SeXy (root@HeXane) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #2 SMP Tue Nov 10 17:37:47 EET 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
 BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable)
 BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
 BIOS-e820: 00000000bf8a7000 - 00000000bf9bc000 (usable)
 BIOS-e820: 00000000bf9bc000 - 00000000bfa0f000 (reserved)
 BIOS-e820: 00000000bfa0f000 - 00000000bfb08000 (usable)
 BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
 BIOS-e820: 00000000bfd0f000 - 00000000bfd19000 (usable)
 BIOS-e820: 00000000bfd19000 - 00000000bfd1f000 (reserved)
 BIOS-e820: 00000000bfd1f000 - 00000000bfd64000 (usable)
 BIOS-e820: 00000000bfd64000 - 00000000bfd9f000 (ACPI NVS)
 BIOS-e820: 00000000bfd9f000 - 00000000bfe00000 (ACPI data)
 BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
 BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0xbfd64 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FC0000000 write-back
  2 base 0BFE00000 mask FFFE00000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
ACPI: RSDP 000f7590 00024 (v02 PTLTD )
ACPI: XSDT bfdf8d7d 0005C (v01 PacBel PBNB0021 0000A028 MSFT 03000001)
ACPI: FACP bfde9000 000F4 (v03 PacBel PBNB0021 0000A028 MSFT 03000001)
ACPI: DSDT bfdea000 05E0D (v02 PacBel PBNB0021 0000A028 INTL 20050624)
ACPI: FACS bfd9efc0 00040
ACPI: HPET bfdfed86 00038 (v01 PacBel PBNB0021 0000A028 MSFT 03000001)
ACPI: MCFG bfdfedbe 0003C (v01 PacBel PBNB0021 0000A028 MSFT 03000001)
ACPI: SLIC bfdfedfa 00176 (v00 PacBel PBNB0021 0000A028      00000000)
ACPI: APIC bfdfef70 00068 (v01 PacBel PBNB0021 0000A028 MSFT 03000001)
ACPI: BOOT bfdfefd8 00028 (v01 PacBel PBNB0021 0000A028 MSFT 03000001)
ACPI: SSDT bfde8000 00655 (v01  PmRef    CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
2181MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
  node 0 low ram: 00000000 - 377fe000
  node 0 bootmap 00008000 - 0000ef00
(8 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 00006b3b70]    TEXT DATA BSS ==> [0000100000 - 00006b3b70]
  #4 [000009c400 - 0000100000]    BIOS reserved ==> [000009c400 - 0000100000]
  #5 [00006b4000 - 00006b7254]              BRK ==> [00006b4000 - 00006b7254]
  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #7 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
found SMP MP-table at [c00f7620] f7620
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x000bfd64
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
    0: 0x00000000 -> 0x0000009c
    0: 0x00000100 -> 0x000bf8a1
    0: 0x000bf8a7 -> 0x000bf9bc
    0: 0x000bfa0f -> 0x000bfb08
    0: 0x000bfd0f -> 0x000bfd19
    0: 0x000bfd1f -> 0x000bfd64
On node 0 totalpages: 785050
free_area_init_node: node 0, pgdat c05a9000, node_mem_map c1000000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3964 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 4363 pages used for memmap
  HighMem zone: 553461 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 11 pages at c2810000, static data 22940 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 778911
Kernel command line: root=/dev/sda5
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
NR_IRQS:320
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 1994.625 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (000377fe:000bfd64)
Memory: 3107816k/3143056k available (3204k kernel code, 31524k reserved, 1644k data, 304k init, 2231296k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff9d000 - 0xfffff000   ( 392 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc05c5000 - 0xc0611000   ( 304 kB)
      .data : 0xc0421167 - 0xc05bc36c   (1644 kB)
      .text : 0xc0100000 - 0xc0421167   (3204 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.25 BogoMIPS (lpj=1994625)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     T5800  @ 2.00GHz stepping 0d
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3989.80 BogoMIPS (lpj=1994900)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU     T5800  @ 2.00GHz stepping 0d
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (7979.05 BogoMIPS).
net_namespace: 776 bytes
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: Power Resource [QFAN] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1a.2: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc404800-0xfc404bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc400000-0xfc403fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc404c00-0xfc404fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7]
pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7]
pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef]
pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3]
pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc404000-0xfc4047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xfc000000-0xfc00ffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10 32bit mmio: [0xfc010000-0xfc013fff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfc0fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xf0000000-0xf7ffffff]
pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xd0000000-0xd1ffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xde000000-0xdfffffff]
pci 0000:04:00.0: reg 10 64bit mmio: [0xfa000000-0xfa001fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf8000000-0xf9ffffff]
pci 0000:00:1c.3: bridge io port: [0x00-0xfff]
pci 0000:00:1c.3: bridge 32bit mmio: [0x000000-0x0fffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0x000000-0x0fffff]
pci 0000:08:00.0: reg 10 io port: [0x6000-0x60ff]
pci 0000:08:00.0: reg 18 64bit mmio: [0xd4000000-0xd4000fff]
pci 0000:08:00.0: reg 20 64bit mmio: [0xd6000000-0xd600ffff]
pci 0000:08:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0x6000-0x6fff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xc8000000-0xc9ffffff]
pci 0000:00:1c.5: bridge 64bit mmio pref: [0xd4000000-0xd7ffffff]
pci 0000:0a:01.0: reg 10 32bit mmio: [0x066000-0x066fff]
pci 0000:0a:01.0: reg 14 32bit mmio: [0xfc100000-0xfc1007ff]
pci 0000:0a:01.0: supports D1 D2
pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:01.0: PME# disabled
pci 0000:0a:01.2: reg 10 32bit mmio: [0xfc100800-0xfc1008ff]
pci 0000:0a:01.2: supports D1 D2
pci 0000:0a:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:01.2: PME# disabled
pci 0000:0a:01.3: reg 10 32bit mmio: [0xfc102000-0xfc102fff]
pci 0000:0a:01.3: supports D1 D2
pci 0000:0a:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0a:01.3: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xfc100000-0xfc1fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
pci 0000:00:1c.3: BAR 7: can't allocate resource
pci 0000:00:1c.3: BAR 8: can't allocate resource
pci 0000:00:1c.3: BAR 9: can't allocate resource
pci 0000:0a:01.0: BAR 0: can't allocate resource
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:05: ioport range 0x400-0x47f has been reserved
system 00:05: ioport range 0x680-0x69f has been reserved
system 00:05: ioport range 0x480-0x48f has been reserved
system 00:05: ioport range 0xffff-0xffff has been reserved
system 00:05: ioport range 0xffff-0xffff has been reserved
system 00:05: ioport range 0x1180-0x11bf has been reserved
system 00:05: ioport range 0x164e-0x164f has been reserved
system 00:05: ioport range 0xfe00-0xfe00 has been reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x2000-0x2fff
pci 0000:00:01.0:   MEM window: 0xfc000000-0xfc0fffff
pci 0000:00:01.0:   PREFETCH window: 0x000000f0000000-0x000000f7ffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
pci 0000:00:1c.0:   MEM window: 0xd0000000-0xd1ffffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000de000000-0x000000dfffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2:   IO window: 0x4000-0x4fff
pci 0000:00:1c.2:   MEM window: 0xfa000000-0xfbffffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000f8000000-0x000000f9ffffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.3:   IO window: disabled
pci 0000:00:1c.3:   MEM window: disabled
pci 0000:00:1c.3:   PREFETCH window: disabled
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.5:   IO window: 0x6000-0x6fff
pci 0000:00:1c.5:   MEM window: 0xc8000000-0xc9ffffff
pci 0000:00:1c.5:   PREFETCH window: 0x000000d4000000-0x000000d7ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0xfc100000-0xfc1fffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfc0fffff]
pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff]
pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0xd0000000-0xd1ffffff]
pci_bus 0000:02: resource 2 pref mem [0xde000000-0xdfffffff]
pci_bus 0000:04: resource 0 io:  [0x4000-0x4fff]
pci_bus 0000:04: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:04: resource 2 pref mem [0xf8000000-0xf9ffffff]
pci_bus 0000:06: resource 0 mem: [0x0-0xfff]
pci_bus 0000:06: resource 1 mem: [0x0-0xfffff]
pci_bus 0000:06: resource 2 mem: [0x0-0xfffff]
pci_bus 0000:08: resource 0 io:  [0x6000-0x6fff]
pci_bus 0000:08: resource 1 mem: [0xc8000000-0xc9ffffff]
pci_bus 0000:08: resource 2 pref mem [0xd4000000-0xd7ffffff]
pci_bus 0000:0a: resource 1 mem: [0xfc100000-0xfc1fffff]
pci_bus 0000:0a: resource 3 io:  [0x00-0xffff]
pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag at 0x35 set to 0x1
Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
Installing knfsd (copyright (C) 1996 [e-mail]).
msgmni has been set to 1713
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
ACPI: AC Adapter [ACAD] (off-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID0]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (off)
ACPI: SSDT bfd1aca0 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT bfd19620 005B3 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switched to high resolution mode on CPU 0
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
Switched to high resolution mode on CPU 1
ACPI: SSDT bfd1aa20 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
ACPI: SSDT bfd1af20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device2
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (58 C)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
ACPI: Battery Slot [BAT1] (battery present)
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
3ware Storage Controller device driver for Linux v1.26.02.002.
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 29
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404300 irq 29
ata6: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404380 irq 29
console [netcon0] enabled
netconsole: network logging started
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
ohci1394 0000:0a:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[fc101000-fc1017ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
ieee1394: raw1394: /dev/raw1394 device initialized
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Linux video capture interface: v2.00
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [e-mail]
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
rtc_cmos 00:06: setting system clock to 2009-11-11 15:14:20 UTC (1257952460)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Clocksource tsc unstable (delta = -100385545 ns)
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
usb 6-1: new full speed USB device using uhci_hcd and address 2
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST9250827AS      3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RP05, max UDMA/133
ata5.00: configured for UDMA/133
 sda1 sda2 sda3 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50N  RP05 PQ: 0 ANSI: 5
usb 6-1: configuration #1 chosen from 1 choice
usb 6-2: new full speed USB device using uhci_hcd and address 3
usb 6-2: configuration #1 chosen from 1 choice
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1e0b2, caps: 0xd04711/0xa00000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
Freeing unused kernel memory: 304k freed
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000000238b0932bf]
udev: starting version 146
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc404800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:08:00.0: setting latency timer to 64
r8169 0000:08:00.0: irq 30 for MSI/MSI-X
eth0: RTL8102e at 0xf8112000, 00:23:8b:09:32:bf, XID 24a00000 IRQ 30
usb 8-5: new high speed USB device using ehci_hcd and address 2
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:04:00.0: setting latency timer to 64
iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-agn-rs'
usb 8-5: configuration #1 chosen from 1 choice
usb 6-1: USB disconnect, address 2
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 2890 MBytes.
[fglrx]   vendor: 1002 device: 95c2 count: 1
[fglrx] ioport: bar 1, base 0x2000, size: 0x100
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Driver built-in PAT support is enabled successfully
[fglrx] module loaded - fglrx 8.66.2 [Sep 23 2009] with 1 minors
usb 6-2: USB disconnect, address 3
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
usb 6-2: new full speed USB device using uhci_hcd and address 4
hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: setting latency timer to 64
usb 6-2: configuration #1 chosen from 1 choice
EXT3 FS on sda5, internal journal
Adding 1004020k swap on /dev/sda6.  Priority:-1 extents:1 across:1004020k 
usb 6-2: USB disconnect, address 4
iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode
iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticated
wlan0: associate with AP 00:21:91:32:4a:aa
wlan0: deauthenticating by local choice (reason=3)
r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
pci 0000:01:00.0: irq 32 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 5590
[fglrx] Gart USWC size:947 M.
[fglrx] Gart cacheable size:375 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[fglrx] Reserved FB block: Unshared offset:7d07000, size:2f9000 
[fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 
usb 8-4: new high speed USB device using ehci_hcd and address 4
usb 8-4: configuration #1 chosen from 1 choice
usb-storage: probe of 8-4:1.0 failed with error -1
usb 8-4: USB disconnect, address 4
PPP generic driver version 2.4.2
CE: hpet increasing min_delta_ns to 15000 nsec
usb 8-4: new high speed USB device using ehci_hcd and address 5
usb 8-4: configuration #1 chosen from 1 choice
option 8-4:1.0: GSM modem (1-port) converter detected
usb 8-4: GSM modem (1-port) converter now attached to ttyUSB0
option 8-4:1.1: GSM modem (1-port) converter detected
usb 8-4: GSM modem (1-port) converter now attached to ttyUSB1
usb-storage: probe of 8-4:1.2 failed with error -1
usb-storage: probe of 8-4:1.3 failed with error -1
iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch
ADDRCONF(NETDEV_UP): wlan0: link is not ready
CE: hpet increasing min_delta_ns to 22500 nsec
CE: hpet increasing min_delta_ns to 33750 nsec
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:04:00.0: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:04:00.0: PCI INT A disabled
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:04:00.0: setting latency timer to 64
iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X
phy1: Selected rate control algorithm 'iwl-agn-rs'
iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode
iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12
Registered led device: iwl-phy1::radio
Registered led device: iwl-phy1::assoc
Registered led device: iwl-phy1::RX
Registered led device: iwl-phy1::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticated
wlan0: associate with AP 00:21:91:32:4a:aa
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:04:00.0: PCI INT A disabled
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:04:00.0: setting latency timer to 64
iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X
phy2: Selected rate control algorithm 'iwl-agn-rs'
iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode
iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12
Registered led device: iwl-phy2::radio
Registered led device: iwl-phy2::assoc
Registered led device: iwl-phy2::RX
Registered led device: iwl-phy2::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticated
wlan0: associate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticated
wlan0: associate with AP 00:21:91:32:4a:aa
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:04:00.0: PCI INT A disabled
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:04:00.0: setting latency timer to 64
iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X
phy3: Selected rate control algorithm 'iwl-agn-rs'
iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode
iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12
Registered led device: iwl-phy3::radio
Registered led device: iwl-phy3::assoc
Registered led device: iwl-phy3::RX
Registered led device: iwl-phy3::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticated
wlan0: associate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:04:00.0: PCI INT A disabled
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:04:00.0: setting latency timer to 64
iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X
phy4: Selected rate control algorithm 'iwl-agn-rs'
iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode
iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12
Registered led device: iwl-phy4::radio
Registered led device: iwl-phy4::assoc
Registered led device: iwl-phy4::RX
Registered led device: iwl-phy4::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticated
wlan0: associate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:04:00.0: PCI INT A disabled
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:04:00.0: setting latency timer to 64
iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X
phy5: Selected rate control algorithm 'iwl-agn-rs'
iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode
iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12
Registered led device: iwl-phy5::radio
Registered led device: iwl-phy5::assoc
Registered led device: iwl-phy5::RX
Registered led device: iwl-phy5::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:04:00.0: PCI INT A disabled
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:04:00.0: setting latency timer to 64
iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X
phy6: Selected rate control algorithm 'iwl-agn-rs'
iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode
iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12
Registered led device: iwl-phy6::radio
Registered led device: iwl-phy6::assoc
Registered led device: iwl-phy6::RX
Registered led device: iwl-phy6::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:04:00.0: PCI INT A disabled
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:04:00.0: setting latency timer to 64
iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X
phy7: Selected rate control algorithm 'iwl-agn-rs'
iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode
iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12
Registered led device: iwl-phy7::radio
Registered led device: iwl-phy7::assoc
Registered led device: iwl-phy7::RX
Registered led device: iwl-phy7::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticated
wlan0: associate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticated
wlan0: associate with AP 00:21:91:32:4a:aa
wlan0: RX AssocResp from 00:21:91:32:4a:aa (capab=0x441 status=12 aid=2)
wlan0: AP denied association (code=12)
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:04:00.0: PCI INT A disabled
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:04:00.0: setting latency timer to 64
iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X
phy8: Selected rate control algorithm 'iwl-agn-rs'
iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode
iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12
Registered led device: iwl-phy8::radio
Registered led device: iwl-phy8::assoc
Registered led device: iwl-phy8::RX
Registered led device: iwl-phy8::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticated
wlan0: associate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:04:00.0: PCI INT A disabled
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:04:00.0: setting latency timer to 64
iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X
phy9: Selected rate control algorithm 'iwl-agn-rs'
iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode
iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12
Registered led device: iwl-phy9::radio
Registered led device: iwl-phy9::assoc
Registered led device: iwl-phy9::RX
Registered led device: iwl-phy9::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: authenticate with AP 00:21:91:32:4a:aa
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch
ADDRCONF(NETDEV_UP): wlan0: link is not ready