Linux version 2.6.30-gentoo-r8-SeXy (root@HeXane) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #2 SMP Tue Nov 10 17:37:47 EET 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c400 (usable) BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable) BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved) BIOS-e820: 00000000bf8a7000 - 00000000bf9bc000 (usable) BIOS-e820: 00000000bf9bc000 - 00000000bfa0f000 (reserved) BIOS-e820: 00000000bfa0f000 - 00000000bfb08000 (usable) BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved) BIOS-e820: 00000000bfd0f000 - 00000000bfd19000 (usable) BIOS-e820: 00000000bfd19000 - 00000000bfd1f000 (reserved) BIOS-e820: 00000000bfd1f000 - 00000000bfd64000 (usable) BIOS-e820: 00000000bfd64000 - 00000000bfd9f000 (ACPI NVS) BIOS-e820: 00000000bfd9f000 - 00000000bfe00000 (ACPI data) BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) DMI present. last_pfn = 0xbfd64 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0BFE00000 mask FFFE00000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 ACPI: RSDP 000f7590 00024 (v02 PTLTD ) ACPI: XSDT bfdf8d7d 0005C (v01 PacBel PBNB0021 0000A028 MSFT 03000001) ACPI: FACP bfde9000 000F4 (v03 PacBel PBNB0021 0000A028 MSFT 03000001) ACPI: DSDT bfdea000 05E0D (v02 PacBel PBNB0021 0000A028 INTL 20050624) ACPI: FACS bfd9efc0 00040 ACPI: HPET bfdfed86 00038 (v01 PacBel PBNB0021 0000A028 MSFT 03000001) ACPI: MCFG bfdfedbe 0003C (v01 PacBel PBNB0021 0000A028 MSFT 03000001) ACPI: SLIC bfdfedfa 00176 (v00 PacBel PBNB0021 0000A028 00000000) ACPI: APIC bfdfef70 00068 (v01 PacBel PBNB0021 0000A028 MSFT 03000001) ACPI: BOOT bfdfefd8 00028 (v01 PacBel PBNB0021 0000A028 MSFT 03000001) ACPI: SSDT bfde8000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: Local APIC address 0xfee00000 2181MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00008000 - 0000ef00 (8 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00006b3b70] TEXT DATA BSS ==> [0000100000 - 00006b3b70] #4 [000009c400 - 0000100000] BIOS reserved ==> [000009c400 - 0000100000] #5 [00006b4000 - 00006b7254] BRK ==> [00006b4000 - 00006b7254] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] found SMP MP-table at [c00f7620] f7620 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x000bfd64 Movable zone start PFN for each node early_node_map[6] active PFN ranges 0: 0x00000000 -> 0x0000009c 0: 0x00000100 -> 0x000bf8a1 0: 0x000bf8a7 -> 0x000bf9bc 0: 0x000bfa0f -> 0x000bfb08 0: 0x000bfd0f -> 0x000bfd19 0: 0x000bfd1f -> 0x000bfd64 On node 0 totalpages: 785050 free_area_init_node: node 0, pgdat c05a9000, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3964 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 4363 pages used for memmap HighMem zone: 553461 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 11 pages at c2810000, static data 22940 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 778911 Kernel command line: root=/dev/sda5 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 NR_IRQS:320 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1994.625 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing HighMem for node 0 (000377fe:000bfd64) Memory: 3107816k/3143056k available (3204k kernel code, 31524k reserved, 1644k data, 304k init, 2231296k highmem) virtual kernel memory layout: fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc05c5000 - 0xc0611000 ( 304 kB) .data : 0xc0421167 - 0xc05bc36c (1644 kB) .text : 0xc0100000 - 0xc0421167 (3204 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.25 BogoMIPS (lpj=1994625) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20090320 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz stepping 0d Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3989.80 BogoMIPS (lpj=1994900) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz stepping 0d checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7979.05 BogoMIPS). net_namespace: 776 bytes NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: Power Resource [QFAN] (off) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f] pci 0000:00:1a.2: reg 20 io port: [0x1840-0x185f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc404800-0xfc404bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc400000-0xfc403fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc404c00-0xfc404fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7] pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7] pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef] pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc404000-0xfc4047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xfc000000-0xfc00ffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 32bit mmio: [0xfc010000-0xfc013fff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfc0fffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xf0000000-0xf7ffffff] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.0: bridge 32bit mmio: [0xd0000000-0xd1ffffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xde000000-0xdfffffff] pci 0000:04:00.0: reg 10 64bit mmio: [0xfa000000-0xfa001fff] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf8000000-0xf9ffffff] pci 0000:00:1c.3: bridge io port: [0x00-0xfff] pci 0000:00:1c.3: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x000000-0x0fffff] pci 0000:08:00.0: reg 10 io port: [0x6000-0x60ff] pci 0000:08:00.0: reg 18 64bit mmio: [0xd4000000-0xd4000fff] pci 0000:08:00.0: reg 20 64bit mmio: [0xd6000000-0xd600ffff] pci 0000:08:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:08:00.0: supports D1 D2 pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0x6000-0x6fff] pci 0000:00:1c.5: bridge 32bit mmio: [0xc8000000-0xc9ffffff] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xd4000000-0xd7ffffff] pci 0000:0a:01.0: reg 10 32bit mmio: [0x066000-0x066fff] pci 0000:0a:01.0: reg 14 32bit mmio: [0xfc100000-0xfc1007ff] pci 0000:0a:01.0: supports D1 D2 pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0a:01.0: PME# disabled pci 0000:0a:01.2: reg 10 32bit mmio: [0xfc100800-0xfc1008ff] pci 0000:0a:01.2: supports D1 D2 pci 0000:0a:01.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0a:01.2: PME# disabled pci 0000:0a:01.3: reg 10 32bit mmio: [0xfc102000-0xfc102fff] pci 0000:0a:01.3: supports D1 D2 pci 0000:0a:01.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0a:01.3: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xfc100000-0xfc1fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing pci 0000:00:1c.3: BAR 7: can't allocate resource pci 0000:00:1c.3: BAR 8: can't allocate resource pci 0000:00:1c.3: BAR 9: can't allocate resource pci 0000:0a:01.0: BAR 0: can't allocate resource Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized cfg80211: Calling CRDA to update world regulatory domain pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved system 00:05: ioport range 0x400-0x47f has been reserved system 00:05: ioport range 0x680-0x69f has been reserved system 00:05: ioport range 0x480-0x48f has been reserved system 00:05: ioport range 0xffff-0xffff has been reserved system 00:05: ioport range 0xffff-0xffff has been reserved system 00:05: ioport range 0x1180-0x11bf has been reserved system 00:05: ioport range 0x164e-0x164f has been reserved system 00:05: ioport range 0xfe00-0xfe00 has been reserved system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved system 00:09: iomem range 0xe0000000-0xefffffff has been reserved system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x2000-0x2fff pci 0000:00:01.0: MEM window: 0xfc000000-0xfc0fffff pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x3000-0x3fff pci 0000:00:1c.0: MEM window: 0xd0000000-0xd1ffffff pci 0000:00:1c.0: PREFETCH window: 0x000000de000000-0x000000dfffffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: 0x4000-0x4fff pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff pci 0000:00:1c.2: PREFETCH window: 0x000000f8000000-0x000000f9ffffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: disabled pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08 pci 0000:00:1c.5: IO window: 0x6000-0x6fff pci 0000:00:1c.5: MEM window: 0xc8000000-0xc9ffffff pci 0000:00:1c.5: PREFETCH window: 0x000000d4000000-0x000000d7ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xfc100000-0xfc1fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfc0fffff] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] pci_bus 0000:02: resource 1 mem: [0xd0000000-0xd1ffffff] pci_bus 0000:02: resource 2 pref mem [0xde000000-0xdfffffff] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] pci_bus 0000:04: resource 1 mem: [0xfa000000-0xfbffffff] pci_bus 0000:04: resource 2 pref mem [0xf8000000-0xf9ffffff] pci_bus 0000:06: resource 0 mem: [0x0-0xfff] pci_bus 0000:06: resource 1 mem: [0x0-0xfffff] pci_bus 0000:06: resource 2 mem: [0x0-0xfffff] pci_bus 0000:08: resource 0 io: [0x6000-0x6fff] pci_bus 0000:08: resource 1 mem: [0xc8000000-0xc9ffffff] pci_bus 0000:08: resource 2 pref mem [0xd4000000-0xd7ffffff] pci_bus 0000:0a: resource 1 mem: [0xfc100000-0xfc1fffff] pci_bus 0000:0a: resource 3 io: [0x00-0xffff] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag at 0x35 set to 0x1 Microcode Update Driver: v2.00 , Peter Oruba highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 1713 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X pcieport-driver 0000:00:1c.5: setting latency timer to 64 ACPI: AC Adapter [ACAD] (off-line) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID0] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN] (off) ACPI: SSDT bfd1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT bfd19620 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle Switched to high resolution mode on CPU 0 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device1 ACPI: Processor [CPU0] (supports 8 throttling states) Switched to high resolution mode on CPU 1 ACPI: SSDT bfd1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: SSDT bfd1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device2 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (58 C) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled ACPI: Battery Slot [BAT1] (battery present) floppy0: no floppy controllers found brd: module loaded loop: module loaded Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Probing IDE interface ide0... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 ide-cd driver 5.00 3ware Storage Controller device driver for Linux v1.26.02.002. Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 29 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 29 ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 29 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404300 irq 29 ata6: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404380 irq 29 console [netcon0] enabled netconsole: network logging started Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.07 ohci1394 0000:0a:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fc101000-fc1017ff] Max Packet=[2048] IR/IT contexts=[8/8] ieee1394: raw1394: /dev/raw1394 device initialized ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbserial USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver option option: v0.7.2:USB Driver for GSM modems PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Linux video capture interface: v2.00 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. Using IPI No-Shortcut mode rtc_cmos 00:06: setting system clock to 2009-11-11 15:14:20 UTC (1257952460) input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 Clocksource tsc unstable (delta = -100385545 ns) ata2: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) usb 6-1: new full speed USB device using uhci_hcd and address 2 ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133 ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST9250827AS 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0 ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RP05, max UDMA/133 ata5.00: configured for UDMA/133 sda1 sda2 sda3 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RP05 PQ: 0 ANSI: 5 usb 6-1: configuration #1 chosen from 1 choice usb 6-2: new full speed USB device using uhci_hcd and address 3 usb 6-2: configuration #1 chosen from 1 choice sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg1 type 5 Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1e0b2, caps: 0xd04711/0xa00000 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:5. Freeing unused kernel memory: 304k freed ieee1394: Host added: ID:BUS[0-00:1023] GUID[000000238b0932bf] udev: starting version 146 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc404800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 6 ports detected r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:08:00.0: setting latency timer to 64 r8169 0000:08:00.0: irq 30 for MSI/MSI-X eth0: RTL8102e at 0xf8112000, 00:23:8b:09:32:bf, XID 24a00000 IRQ 30 usb 8-5: new high speed USB device using ehci_hcd and address 2 iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:04:00.0: setting latency timer to 64 iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X phy0: Selected rate control algorithm 'iwl-agn-rs' usb 8-5: configuration #1 chosen from 1 choice usb 6-1: USB disconnect, address 2 fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. Disabling lock debugging due to kernel taint [fglrx] Maximum main memory to use for locked dma buffers: 2890 MBytes. [fglrx] vendor: 1002 device: 95c2 count: 1 [fglrx] ioport: bar 1, base 0x2000, size: 0x100 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:01:00.0: setting latency timer to 64 [fglrx] Driver built-in PAT support is enabled successfully [fglrx] module loaded - fglrx 8.66.2 [Sep 23 2009] with 1 minors usb 6-2: USB disconnect, address 3 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 usb 6-2: new full speed USB device using uhci_hcd and address 4 hda_codec: Unknown model for ALC662, trying auto-probe from BIOS... HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:01:00.1: setting latency timer to 64 usb 6-2: configuration #1 chosen from 1 choice EXT3 FS on sda5, internal journal Adding 1004020k swap on /dev/sda6. Priority:-1 extents:1 across:1004020k usb 6-2: USB disconnect, address 4 iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticated wlan0: associate with AP 00:21:91:32:4a:aa wlan0: deauthenticating by local choice (reason=3) r8169: eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready Bluetooth: L2CAP ver 2.13 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast pci 0000:01:00.0: irq 32 for MSI/MSI-X [fglrx] Firegl kernel thread PID: 5590 [fglrx] Gart USWC size:947 M. [fglrx] Gart cacheable size:375 M. [fglrx] Reserved FB block: Shared offset:0, size:1000000 [fglrx] Reserved FB block: Unshared offset:7d07000, size:2f9000 [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 usb 8-4: new high speed USB device using ehci_hcd and address 4 usb 8-4: configuration #1 chosen from 1 choice usb-storage: probe of 8-4:1.0 failed with error -1 usb 8-4: USB disconnect, address 4 PPP generic driver version 2.4.2 CE: hpet increasing min_delta_ns to 15000 nsec usb 8-4: new high speed USB device using ehci_hcd and address 5 usb 8-4: configuration #1 chosen from 1 choice option 8-4:1.0: GSM modem (1-port) converter detected usb 8-4: GSM modem (1-port) converter now attached to ttyUSB0 option 8-4:1.1: GSM modem (1-port) converter detected usb 8-4: GSM modem (1-port) converter now attached to ttyUSB1 usb-storage: probe of 8-4:1.2 failed with error -1 usb-storage: probe of 8-4:1.3 failed with error -1 iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch ADDRCONF(NETDEV_UP): wlan0: link is not ready CE: hpet increasing min_delta_ns to 22500 nsec CE: hpet increasing min_delta_ns to 33750 nsec wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:04:00.0: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:04:00.0: PCI INT A disabled iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:04:00.0: setting latency timer to 64 iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X phy1: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12 Registered led device: iwl-phy1::radio Registered led device: iwl-phy1::assoc Registered led device: iwl-phy1::RX Registered led device: iwl-phy1::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticated wlan0: associate with AP 00:21:91:32:4a:aa wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:04:00.0: PCI INT A disabled iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:04:00.0: setting latency timer to 64 iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X phy2: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12 Registered led device: iwl-phy2::radio Registered led device: iwl-phy2::assoc Registered led device: iwl-phy2::RX Registered led device: iwl-phy2::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticated wlan0: associate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticated wlan0: associate with AP 00:21:91:32:4a:aa wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:04:00.0: PCI INT A disabled iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:04:00.0: setting latency timer to 64 iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X phy3: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12 Registered led device: iwl-phy3::radio Registered led device: iwl-phy3::assoc Registered led device: iwl-phy3::RX Registered led device: iwl-phy3::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticated wlan0: associate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:04:00.0: PCI INT A disabled iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:04:00.0: setting latency timer to 64 iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X phy4: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12 Registered led device: iwl-phy4::radio Registered led device: iwl-phy4::assoc Registered led device: iwl-phy4::RX Registered led device: iwl-phy4::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticated wlan0: associate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:04:00.0: PCI INT A disabled iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:04:00.0: setting latency timer to 64 iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X phy5: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12 Registered led device: iwl-phy5::radio Registered led device: iwl-phy5::assoc Registered led device: iwl-phy5::RX Registered led device: iwl-phy5::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:04:00.0: PCI INT A disabled iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:04:00.0: setting latency timer to 64 iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X phy6: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12 Registered led device: iwl-phy6::radio Registered led device: iwl-phy6::assoc Registered led device: iwl-phy6::RX Registered led device: iwl-phy6::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:04:00.0: PCI INT A disabled iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:04:00.0: setting latency timer to 64 iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X phy7: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12 Registered led device: iwl-phy7::radio Registered led device: iwl-phy7::assoc Registered led device: iwl-phy7::RX Registered led device: iwl-phy7::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticated wlan0: associate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticated wlan0: associate with AP 00:21:91:32:4a:aa wlan0: RX AssocResp from 00:21:91:32:4a:aa (capab=0x441 status=12 aid=2) wlan0: AP denied association (code=12) wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:04:00.0: PCI INT A disabled iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:04:00.0: setting latency timer to 64 iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X phy8: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12 Registered led device: iwl-phy8::radio Registered led device: iwl-phy8::assoc Registered led device: iwl-phy8::RX Registered led device: iwl-phy8::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticated wlan0: associate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:04:00.0: PCI INT A disabled iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:04:00.0: setting latency timer to 64 iwlagn 0000:04:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 iwlagn 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:04:00.0: irq 31 for MSI/MSI-X phy9: Selected rate control algorithm 'iwl-agn-rs' iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-2.ucode iwlagn 0000:04:00.0: loaded firmware version 8.24.2.12 Registered led device: iwl-phy9::radio Registered led device: iwl-phy9::assoc Registered led device: iwl-phy9::RX Registered led device: iwl-phy9::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: authenticate with AP 00:21:91:32:4a:aa wlan0: deauthenticating by local choice (reason=3) iwlagn 0000:04:00.0: Radio disabled by SW RF Kill switch ADDRCONF(NETDEV_UP): wlan0: link is not ready