boot dmesg

dmesg (text/plain), 22.96 KB, created by Alex Blom on 2007-03-25 11:59:25 UTC

Linux version 2.6.21-rc4-git10 (root@tacaz) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #1 SMP Sun Mar 25 13:34:33 CEST 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000007fdf0000 end: 000000007fef0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000007fef0000 size: 0000000000003000 end: 000000007fef3000 type: 4
copy_e820_map() start: 000000007fef3000 size: 000000000000d000 end: 000000007ff00000 type: 3
copy_e820_map() start: 00000000f0000000 size: 0000000002000000 end: 00000000f2000000 type: 2
copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
 BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
 BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
 BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6020
Entering add_active_range(0, 0, 524016) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   524016
early_node_map[1] active PFN ranges
    0:        0 ->   524016
On node 0 totalpages: 524016
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 2301 pages used for memmap
  HighMem zone: 292339 pages, LIFO batch:31
DMI 2.4 present.
ACPI: RSDP 000F7AA0, 0024 (r2 Nvidia)
ACPI: XSDT 7FEF30C0, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
ACPI: FACP 7FEFB640, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD        0)
ACPI: DSDT 7FEF3240, 8398 (r1 NVIDIA AWRDACPI     1000 MSFT  3000000)
ACPI: FACS 7FEF0000, 0040
ACPI: HPET 7FEFB880, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD       98)
ACPI: MCFG 7FEFB900, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
ACPI: APIC 7FEFB780, 0098 (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
Built 1 zonelists.  Total pages: 519923
Kernel command line: root=/dev/sda4
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2400.057 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2073516k/2096064k available (2589k kernel code, 21352k reserved, 858k data, 236k init, 1178560k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff9d000 - 0xfffff000   ( 392 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0466000 - 0xc04a1000   ( 236 kB)
      .data : 0xc03877bb - 0xc045e02c   ( 858 kB)
      .text : 0xc0100000 - 0xc03877bb   (2589 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
Calibrating delay using timer specific routine.. 4803.70 BogoMIPS (lpj=9607412)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4800.01 BogoMIPS (lpj=9600036)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
Total of 2 processors activated (9603.72 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=61
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
0000:00:0d.0: cannot adjust BAR0 (not I/O)
0000:00:0d.0: cannot adjust BAR1 (not I/O)
0000:00:0d.0: cannot adjust BAR2 (not I/O)
0000:00:0d.0: cannot adjust BAR3 (not I/O)
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:0f.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
Generic PHY: Registered new driver
SCSI subsystem initialized
libata version 2.20 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:01: ioport range 0x1000-0x107f has been reserved
pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
pnp: 00:01: ioport range 0x1400-0x147f has been reserved
pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
pnp: 00:01: ioport range 0x1800-0x187f has been reserved
pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
pnp: 00:01: iomem range 0x0-0x0 could not be reserved
pnp: 00:09: iomem range 0xf0000000-0xf1ffffff has been reserved
pnp: 00:0a: iomem range 0xd0000-0xd3fff has been reserved
Time: tsc clocksource has been installed.
pnp: 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:0a: iomem range 0xfc000-0xfffff could not be reserved
PCI: Bridge: 0000:00:03.0
  IO window: c000-cfff
  MEM window: eb000000-edffffff
  PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:06.0
  IO window: a000-afff
  MEM window: ef900000-ef9fffff
  PREFETCH window: efc00000-efcfffff
PCI: Bridge: 0000:00:07.0
  IO window: d000-dfff
  MEM window: efb00000-efbfffff
  PREFETCH window: efa00000-efafffff
PCI: Bridge: 0000:00:0f.0
  IO window: b000-bfff
  MEM window: efe00000-efefffff
  PREFETCH window: efd00000-efdfffff
PCI: Bridge: 0000:00:13.0
  IO window: 9000-9fff
  MEM window: ef800000-ef8fffff
  PREFETCH window: ef700000-ef7fffff
PCI: Bridge: 0000:00:14.0
  IO window: 8000-8fff
  MEM window: ef600000-ef6fffff
  PREFETCH window: ef500000-ef5fffff
PCI: Bridge: 0000:00:15.0
  IO window: 7000-7fff
  MEM window: ef400000-ef4fffff
  PREFETCH window: ef300000-ef3fffff
PCI: Bridge: 0000:00:16.0
  IO window: 6000-6fff
  MEM window: ef200000-ef2fffff
  PREFETCH window: ef100000-ef1fffff
PCI: Bridge: 0000:00:17.0
  IO window: 5000-5fff
  MEM window: ef000000-ef0fffff
  PREFETCH window: eef00000-eeffffff
PCI: Bridge: 0000:00:18.0
  IO window: 4000-4fff
  MEM window: eee00000-eeefffff
  PREFETCH window: eed00000-eedfffff
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:00:0f.0 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
PCI: Setting latency timer of device 0000:00:14.0 to 64
PCI: Setting latency timer of device 0000:00:15.0 to 64
PCI: Setting latency timer of device 0000:00:16.0 to 64
PCI: Setting latency timer of device 0000:00:17.0 to 64
PCI: Setting latency timer of device 0000:00:18.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <[e-mail]>
highmem bounce pool size: 64 pages
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie03]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie03]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
Allocate Port Service[0000:00:07.0:pcie03]
PCI: Setting latency timer of device 0000:00:13.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:13.0:pcie00]
Allocate Port Service[0000:00:13.0:pcie03]
PCI: Setting latency timer of device 0000:00:14.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:14.0:pcie00]
Allocate Port Service[0000:00:14.0:pcie03]
PCI: Setting latency timer of device 0000:00:15.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:15.0:pcie00]
Allocate Port Service[0000:00:15.0:pcie03]
PCI: Setting latency timer of device 0000:00:16.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:16.0:pcie00]
Allocate Port Service[0000:00:16.0:pcie03]
PCI: Setting latency timer of device 0000:00:17.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:17.0:pcie00]
Allocate Port Service[0000:00:17.0:pcie03]
PCI: Setting latency timer of device 0000:00:18.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:18.0:pcie00]
Allocate Port Service[0000:00:18.0:pcie03]
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (40 C)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfeff0000 is busy
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Marvell 88E1101: Registered new driver
Marvell 88E1111: Registered new driver
Marvell 88E1145: Registered new driver
Fixed PHY: Registered new driver
Device 'fixed@100:1' does not have a release() function, it is broken and must be fixed.
BUG: at drivers/base/core.c:120 device_release()
 [<c0234199>] kobject_cleanup+0x49/0x80
 [<c02341d0>] kobject_release+0x0/0x10
 [<c0234f9b>] kref_put+0x2b/0x80
 [<c029fd2a>] fixed_mdio_register_device+0x21a/0x280
 [<c04868ab>] fixed_init+0x1b/0x30
 [<c04668e0>] init+0x150/0x290
 [<c01029e6>] ret_from_fork+0x6/0x1c
 [<c0466790>] init+0x0/0x290
 [<c0466790>] init+0x0/0x290
 [<c01036eb>] kernel_thread_helper+0x7/0x1c
 =======================
Device 'fixed@10:1' does not have a release() function, it is broken and must be fixed.
BUG: at drivers/base/core.c:120 device_release()
 [<c0234199>] kobject_cleanup+0x49/0x80
 [<c02341d0>] kobject_release+0x0/0x10
 [<c0234f9b>] kref_put+0x2b/0x80
 [<c029fd2a>] fixed_mdio_register_device+0x21a/0x280
 [<c04868bc>] fixed_init+0x2c/0x30
 [<c04668e0>] init+0x150/0x290
 [<c01029e6>] ret_from_fork+0x6/0x1c
 [<c0466790>] init+0x0/0x290
 [<c0466790>] init+0x0/0x290
 [<c01036eb>] kernel_thread_helper+0x7/0x1c
 =======================
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:11.0 to 64
0000:00:11.0: resource 0 start efffa000 len 4096 flags 0x00000000.
forcedeth: using HIGHDMA
0000:00:11.0: MAC Address 00:0e:a6:f1:af:94
0000:00:11.0: link timer on.
eth%d: mii_rw read from reg 2 at PHY 1: 0x141.
eth%d: mii_rw read from reg 3 at PHY 1: 0xe11.
0000:00:11.0: open: Found PHY 5040:0003 at address 1.
eth%d: mii_rw read from reg 4 at PHY 1: 0xde1.
eth%d: mii_rw wrote 0xde1 to reg 4 at PHY 1
eth%d: mii_rw read from reg 1 at PHY 1: 0x796d.
eth%d: mii_rw read from reg 9 at PHY 1: 0x200.
eth%d: mii_rw wrote 0x200 to reg 9 at PHY 1
eth%d: mii_rw read from reg 0 at PHY 1: 0x1140.
eth%d: mii_rw wrote 0x9140 to reg 0 at PHY 1
eth%d: mii_rw read from reg 0 at PHY 1: 0x1140.
eth%d: mii_rw wrote 0xde1 to reg 4 at PHY 1
eth%d: mii_rw read from reg 0 at PHY 1: 0x1140.
eth%d: mii_rw wrote 0x1340 to reg 0 at PHY 1
eth0: forcedeth.c: subsystem: 01043:cb84 bound to 0000:00:11.0
sata_nv 0000:00:0e.0: version 3.3
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:0e.0 to 64
ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001f700 irq 17
ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001f708 irq 17
scsi0 : sata_nv
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: SAMSUNG HD321KJ, CP100-06, max UDMA7
ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi1 : sata_nv
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI, max UDMA/33
ata2.00: applying bridge limits
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD321KJ  CP10 PQ: 0 ANSI: 5
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S183A SB00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:0e.1 to 64
ata3: SATA max UDMA/133 cmd 0x000109e0 ctl 0x00010be2 bmdma 0x0001f200 irq 18
ata4: SATA max UDMA/133 cmd 0x00010960 ctl 0x00010b62 bmdma 0x0001f208 irq 18
scsi2 : sata_nv
ata3: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x000109e7
scsi3 : sata_nv
ata4: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x00010967
ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:0e.2[C] -> Link [ASA2] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:0e.2 to 64
ata5: SATA max UDMA/133 cmd 0x0001f100 ctl 0x0001f002 bmdma 0x0001ed00 irq 19
ata6: SATA max UDMA/133 cmd 0x0001ef00 ctl 0x0001ee02 bmdma 0x0001ed08 irq 19
scsi4 : sata_nv
ata5: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x0001f107
scsi5 : sata_nv
ata6: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x0001ef07
usbmon: debugfs is not available
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:0b.1 to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:0b.1
ehci_hcd 0000:00:0b.1: irq 16, io mem 0xefffe000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 17, io mem 0xeffff000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb 2-2: new low speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input2
input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:0b.0-2
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input3
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 236k freed
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:0f.1[B] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:0f.1 to 64
hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
EXT3 FS on sda4, internal journal
Adding 1004052k swap on /dev/sda3.  Priority:-1 extents:1 across:1004052k