Linux version 2.6.21-rc4-git10 (root@tacaz) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #1 SMP Sun Mar 25 13:34:33 CEST 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000007fdf0000 end: 000000007fef0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000007fef0000 size: 0000000000003000 end: 000000007fef3000 type: 4 copy_e820_map() start: 000000007fef3000 size: 000000000000d000 end: 000000007ff00000 type: 3 copy_e820_map() start: 00000000f0000000 size: 0000000002000000 end: 00000000f2000000 type: 2 copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS) BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data) BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 1150MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6020 Entering add_active_range(0, 0, 524016) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 524016 early_node_map[1] active PFN ranges 0: 0 -> 524016 On node 0 totalpages: 524016 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2301 pages used for memmap HighMem zone: 292339 pages, LIFO batch:31 DMI 2.4 present. ACPI: RSDP 000F7AA0, 0024 (r2 Nvidia) ACPI: XSDT 7FEF30C0, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: FACP 7FEFB640, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: DSDT 7FEF3240, 8398 (r1 NVIDIA AWRDACPI 1000 MSFT 3000000) ACPI: FACS 7FEF0000, 0040 ACPI: HPET 7FEFB880, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) ACPI: MCFG 7FEFB900, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: APIC 7FEFB780, 0098 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x10de8201 base: 0xfeff0000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000) Built 1 zonelists. Total pages: 519923 Kernel command line: root=/dev/sda4 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2400.057 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2073516k/2096064k available (2589k kernel code, 21352k reserved, 858k data, 236k init, 1178560k highmem) virtual kernel memory layout: fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0466000 - 0xc04a1000 ( 236 kB) .data : 0xc03877bb - 0xc045e02c ( 858 kB) .text : 0xc0100000 - 0xc03877bb (2589 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz Calibrating delay using timer specific routine.. 4803.70 BogoMIPS (lpj=9607412) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 14k freed ACPI: Core revision 20070126 CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4800.01 BogoMIPS (lpj=9600036) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 Total of 2 processors activated (9603.72 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs migration_cost=61 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) 0000:00:0d.0: cannot adjust BAR0 (not I/O) 0000:00:0d.0: cannot adjust BAR1 (not I/O) 0000:00:0d.0: cannot adjust BAR2 (not I/O) 0000:00:0d.0: cannot adjust BAR3 (not I/O) Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:0f.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices Generic PHY: Registered new driver SCSI subsystem initialized libata version 2.20 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:01: ioport range 0x1000-0x107f has been reserved pnp: 00:01: ioport range 0x1080-0x10ff has been reserved pnp: 00:01: ioport range 0x1400-0x147f has been reserved pnp: 00:01: ioport range 0x1480-0x14ff has been reserved pnp: 00:01: ioport range 0x1800-0x187f has been reserved pnp: 00:01: ioport range 0x1880-0x18ff has been reserved pnp: 00:01: iomem range 0x0-0x0 could not be reserved pnp: 00:09: iomem range 0xf0000000-0xf1ffffff has been reserved pnp: 00:0a: iomem range 0xd0000-0xd3fff has been reserved Time: tsc clocksource has been installed. pnp: 00:0a: iomem range 0xf0000-0xf7fff could not be reserved pnp: 00:0a: iomem range 0xf8000-0xfbfff could not be reserved pnp: 00:0a: iomem range 0xfc000-0xfffff could not be reserved PCI: Bridge: 0000:00:03.0 IO window: c000-cfff MEM window: eb000000-edffffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:06.0 IO window: a000-afff MEM window: ef900000-ef9fffff PREFETCH window: efc00000-efcfffff PCI: Bridge: 0000:00:07.0 IO window: d000-dfff MEM window: efb00000-efbfffff PREFETCH window: efa00000-efafffff PCI: Bridge: 0000:00:0f.0 IO window: b000-bfff MEM window: efe00000-efefffff PREFETCH window: efd00000-efdfffff PCI: Bridge: 0000:00:13.0 IO window: 9000-9fff MEM window: ef800000-ef8fffff PREFETCH window: ef700000-ef7fffff PCI: Bridge: 0000:00:14.0 IO window: 8000-8fff MEM window: ef600000-ef6fffff PREFETCH window: ef500000-ef5fffff PCI: Bridge: 0000:00:15.0 IO window: 7000-7fff MEM window: ef400000-ef4fffff PREFETCH window: ef300000-ef3fffff PCI: Bridge: 0000:00:16.0 IO window: 6000-6fff MEM window: ef200000-ef2fffff PREFETCH window: ef100000-ef1fffff PCI: Bridge: 0000:00:17.0 IO window: 5000-5fff MEM window: ef000000-ef0fffff PREFETCH window: eef00000-eeffffff PCI: Bridge: 0000:00:18.0 IO window: 4000-4fff MEM window: eee00000-eeefffff PREFETCH window: eed00000-eedfffff PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 PCI: Setting latency timer of device 0000:00:0f.0 to 64 PCI: Setting latency timer of device 0000:00:13.0 to 64 PCI: Setting latency timer of device 0000:00:14.0 to 64 PCI: Setting latency timer of device 0000:00:15.0 to 64 PCI: Setting latency timer of device 0000:00:16.0 to 64 PCI: Setting latency timer of device 0000:00:17.0 to 64 PCI: Setting latency timer of device 0000:00:18.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14a highmem bounce pool size: 64 pages io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie03] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie03] PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] Allocate Port Service[0000:00:07.0:pcie03] PCI: Setting latency timer of device 0000:00:13.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:13.0:pcie00] Allocate Port Service[0000:00:13.0:pcie03] PCI: Setting latency timer of device 0000:00:14.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:14.0:pcie00] Allocate Port Service[0000:00:14.0:pcie03] PCI: Setting latency timer of device 0000:00:15.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:15.0:pcie00] Allocate Port Service[0000:00:15.0:pcie03] PCI: Setting latency timer of device 0000:00:16.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:16.0:pcie00] Allocate Port Service[0000:00:16.0:pcie03] PCI: Setting latency timer of device 0000:00:17.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:17.0:pcie00] Allocate Port Service[0000:00:17.0:pcie03] PCI: Setting latency timer of device 0000:00:18.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:18.0:pcie00] Allocate Port Service[0000:00:18.0:pcie03] input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (40 C) Real Time Clock Driver v1.12ac hpet_resources: 0xfeff0000 is busy Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Marvell 88E1101: Registered new driver Marvell 88E1111: Registered new driver Marvell 88E1145: Registered new driver Fixed PHY: Registered new driver Device 'fixed@100:1' does not have a release() function, it is broken and must be fixed. BUG: at drivers/base/core.c:120 device_release() [] kobject_cleanup+0x49/0x80 [] kobject_release+0x0/0x10 [] kref_put+0x2b/0x80 [] fixed_mdio_register_device+0x21a/0x280 [] fixed_init+0x1b/0x30 [] init+0x150/0x290 [] ret_from_fork+0x6/0x1c [] init+0x0/0x290 [] init+0x0/0x290 [] kernel_thread_helper+0x7/0x1c ======================= Device 'fixed@10:1' does not have a release() function, it is broken and must be fixed. BUG: at drivers/base/core.c:120 device_release() [] kobject_cleanup+0x49/0x80 [] kobject_release+0x0/0x10 [] kref_put+0x2b/0x80 [] fixed_mdio_register_device+0x21a/0x280 [] fixed_init+0x2c/0x30 [] init+0x150/0x290 [] ret_from_fork+0x6/0x1c [] init+0x0/0x290 [] init+0x0/0x290 [] kernel_thread_helper+0x7/0x1c ======================= forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:11.0 to 64 0000:00:11.0: resource 0 start efffa000 len 4096 flags 0x00000000. forcedeth: using HIGHDMA 0000:00:11.0: MAC Address 00:0e:a6:f1:af:94 0000:00:11.0: link timer on. eth%d: mii_rw read from reg 2 at PHY 1: 0x141. eth%d: mii_rw read from reg 3 at PHY 1: 0xe11. 0000:00:11.0: open: Found PHY 5040:0003 at address 1. eth%d: mii_rw read from reg 4 at PHY 1: 0xde1. eth%d: mii_rw wrote 0xde1 to reg 4 at PHY 1 eth%d: mii_rw read from reg 1 at PHY 1: 0x796d. eth%d: mii_rw read from reg 9 at PHY 1: 0x200. eth%d: mii_rw wrote 0x200 to reg 9 at PHY 1 eth%d: mii_rw read from reg 0 at PHY 1: 0x1140. eth%d: mii_rw wrote 0x9140 to reg 0 at PHY 1 eth%d: mii_rw read from reg 0 at PHY 1: 0x1140. eth%d: mii_rw wrote 0xde1 to reg 4 at PHY 1 eth%d: mii_rw read from reg 0 at PHY 1: 0x1140. eth%d: mii_rw wrote 0x1340 to reg 0 at PHY 1 eth0: forcedeth.c: subsystem: 01043:cb84 bound to 0000:00:11.0 sata_nv 0000:00:0e.0: version 3.3 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:0e.0 to 64 ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001f700 irq 17 ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001f708 irq 17 scsi0 : sata_nv ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: SAMSUNG HD321KJ, CP100-06, max UDMA7 ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI, max UDMA/33 ata2.00: applying bridge limits ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5 SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183A SB00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:0e.1 to 64 ata3: SATA max UDMA/133 cmd 0x000109e0 ctl 0x00010be2 bmdma 0x0001f200 irq 18 ata4: SATA max UDMA/133 cmd 0x00010960 ctl 0x00010b62 bmdma 0x0001f208 irq 18 scsi2 : sata_nv ata3: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x000109e7 scsi3 : sata_nv ata4: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x00010967 ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:0e.2[C] -> Link [ASA2] -> GSI 20 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:0e.2 to 64 ata5: SATA max UDMA/133 cmd 0x0001f100 ctl 0x0001f002 bmdma 0x0001ed00 irq 19 ata6: SATA max UDMA/133 cmd 0x0001ef00 ctl 0x0001ee02 bmdma 0x0001ed08 irq 19 scsi4 : sata_nv ata5: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x0001f107 scsi5 : sata_nv ata6: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x0001ef07 usbmon: debugfs is not available ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:0b.1 to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:0b.1 ehci_hcd 0000:00:0b.1: irq 16, io mem 0xefffe000 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:0b.0 to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 17, io mem 0xeffff000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected usb 2-2: new low speed USB device using ohci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input2 input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:0b.0-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input3 oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI Shortcut mode kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 236k freed ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:0f.1[B] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:0f.1 to 64 hda_codec: Unknown model for AD1988, trying auto-probe from BIOS... EXT3 FS on sda4, internal journal Adding 1004052k swap on /dev/sda3. Priority:-1 extents:1 across:1004052k