Please test the prereleases which reside in pitr:/releases/2005.1/ These files are part of the prerelease up to the moment: 1ebd76508d6123fde62c5055b21a5b96 install-amd64-2005.1-pre1.iso b1b8912de53d20b6afa0e383685f8e71 stage1-amd64-2005.1-pre1.tar.bz2 688bf15e443c7aec4d1387c9a1a90982 stage2-amd64-2005.1-pre1.tar.bz2 b468417be8eef5c358c18aee66f72d16 stage3-amd64-2005.1-pre1.tar.bz2 6cb551497562cb274b758e1f93549144 stage3-amd64-2005.1-seed.tar.bz2 Before you reply to this bug, please check that your file matches the md5sum that i gave here. Please _don't comment_, if your stage is outdated. Instead, try to recreate your problem with the latest version. Thank you! I'd like to get checks on these facts: o installcd boots on AMD _and_ Intel CPUs (Astinus and other em64t devs: please test!) o installcd has no problems with SMP systems (cparrot, could you try to boot it on one of your bigger SMP boxes?) o stage1-3: work fine with an empty /etc/make.conf:USE o stage1-3: work fine with your main boxes' USE (Come on people, get creative ;-) ) Thank you for testing! :-)
Not sure what I'm doing wrong, but with stage1 bootstrap: [[ (3/3) Emerging packages ]] Calculating dependencies / !!! All ebuilds that could satisfy "virtual/libc" have been masked. !!! One of the following masked packages is required to complete your request: - sys-libs/glibc-2.3.4.20041102 (masked by: profile) - sys-libs/glibc-2.3.4.20041102-r1 (masked by: profile) - sys-libs/glibc-2.3.5.20050421 (masked by: package.mask, -* keyword) # Martin Schlemmer <azarah@gentoo.org> (23 Apr 2005) # Testing release for gcc-4.0.0. - sys-libs/glibc-2.3.3.20040420-r2 (masked by: profile, missing keyword) - sys-libs/glibc-2.3.4.20050125 (masked by: profile, ~amd64 keyword) - sys-libs/glibc-2.3.5 (masked by: ~amd64 keyword) - sys-libs/glibc-2.3.2-r12 (masked by: profile) - sys-libs/glibc-2.3.4.20040619-r2 (masked by: profile) - sys-libs/glibc-2.3.4.20040808-r1 (masked by: profile) - sys-libs/glibc-2.2.5-r10 (masked by: profile, missing keyword) - sys-libs/glibc-2.3.4.20050125-r1 (masked by: profile, ~amd64 keyword) For more information, see MASKED PACKAGES section in the emerge man page or section 2.2 "Software Availability" in the Gentoo Handbook. make.conf edited to use -O0 and added nptl use flags. Also, when I try to bootstrap again, it thinks that the bootstrapping is done (since I ran another emerge, it probably cleared the resume data). How can I reset this?
I'm sorry, I will add my portage-snapshot to the release directory. You have to use that one instead of the livetree.
Ok, a new set of stages and a new installcd just arrived in /releases/2005.1-pre2/: ac0f96edc6430338770724c5e3650301 install-amd64-2005.1-pre2.iso fbfd04ae131ec83c87800abf2211eaea stage1-amd64-2005.1-pre2.tar.bz2 e128ab76dc8fefdd7ec1e4645309813d stage2-amd64-2005.1-pre2.tar.bz2 6cb551497562cb274b758e1f93549144 stage3-amd64-2005.0.tar.bz2 48b3887b9f125524ea4e74a0fa16edbe stage3-amd64-2005.1-pre2.tar.bz2 Please double check that you are using the latest versions before your report anything. Thanks!
Rebuild the installcd now with one of Tim's patches. Mike, thx for finding this! New md5sum: 6a97d9cc265eac0d49a691851ee407bd install-amd64-2005.1-pre2.iso cparrott: Can you please test this again on your SMP DC box? TIA!
I will try to get to this as soon as I can. Things are a little busier than usual around our lab this week, so it may take me a bit longer than usual. I shall report my findings here.
OK, I tested this on two different dual-core boxes with mixed results: Candidate #1: IBM eSeries 326 with 2 Opteron 880 (2.4 GHz dual-core) CPUs Seems to work fine. Kernel boots and enumerates all 4 cores. CD successfully mounts, detects hardware, and drops to the usual livecd prompt where installation can begin. Candidate #2: Celestica "Serenade" reference board with 4 Opteron 875 (2.2 GHz dual-core) CPUs Has problems. Kernel boots and enumerates all 8 cores. Init does not successfully detect the CD drive to mount the CD image from, and continue booting. The sequence is roughly as follows: Initializing /tmproot Attempting to mount /dev/cdroms/cdrom0 Attempting to mount /dev/hda The last two lines are repeated a couple of times, before the failure prompt appears. Dropping into a shell and attempting to mount the CD manually results in an "Invalid argument" error from the system. The system contains 3 SCSI disks, and an IDE CD-ROM drive. Here are the contents of lspci -v for the system: 0000:00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) (pro g-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 115 Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 I/O behind bridge: 00002000-00002fff Memory behind bridge: e0000000-e1ffffff Expansion ROM at 00002000 [disabled] [size=4K] Capabilities: [c0] #08 [0086] Capabilities: [f0] #08 [8000] 0000:00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05) Subsystem: Advanced Micro Devices [AMD]: Unknown device 2b80 Flags: bus master, 66Mhz, medium devsel, latency 0 0000:00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) ( prog-if 8a [Master SecP PriP]) Subsystem: Advanced Micro Devices [AMD]: Unknown device 2b80 Flags: bus master, medium devsel, latency 64 I/O ports at 1020 [size=16] 0000:00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05) Subsystem: Advanced Micro Devices [AMD]: Unknown device 2b80 Flags: medium devsel 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel Capabilities: [80] #08 [2101] Capabilities: [a0] #08 [2101] Capabilities: [c0] #08 [2101] 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel Capabilities: [80] #08 [2101] Capabilities: [a0] #08 [2101] Capabilities: [c0] #08 [2101] 0000:00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:1a.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel Capabilities: [80] #08 [2101] Capabilities: [a0] #08 [2101] Capabilities: [c0] #08 [2101] 0000:00:1a.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:1a.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:1a.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:1b.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel Capabilities: [80] #08 [2101] Capabilities: [a0] #08 [2101] Capabilities: [c0] #08 [2101] 0000:00:1b.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:1b.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:00:1b.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Flags: fast devsel 0000:01:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices [AMD]: Unknown device 2b80 Flags: bus master, medium devsel, latency 64, IRQ 19 Memory at e0000000 (32-bit, non-prefetchable) 0000:01:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices [AMD]: Unknown device 2b80 Flags: bus master, medium devsel, latency 64, IRQ 19 Memory at e0001000 (32-bit, non-prefetchable) 0000:01:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (p rog-if 00 [VGA]) Subsystem: ATI Technologies Inc Rage XL Flags: bus master, stepping, medium devsel, latency 64, IRQ 10 Memory at e1000000 (32-bit, non-prefetchable) I/O ports at 2000 [size=256] Memory at e0002000 (32-bit, non-prefetchable) [size=4K] Capabilities: [5c] Power Management version 2 0000:08:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 64 Bus: primary=08, secondary=09, subordinate=0d, sec-latency=64 Capabilities: [a0] Capabilities: [b8] #08 [8000] Capabilities: [c0] #08 [0041] 0000:08:01.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (pro g-if 10 [IO-APIC]) Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC Flags: bus master, medium devsel, latency 0 Memory at e2200000 (64-bit, non-prefetchable) 0000:08:02.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 64 Bus: primary=08, secondary=0e, subordinate=12, sec-latency=128 I/O behind bridge: 00003000-00003fff Memory behind bridge: e3300000-e33fffff Expansion ROM at 00003000 [disabled] [size=4K] Capabilities: [a0] Capabilities: [b8] #08 [8000] 0000:08:02.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (pro g-if 10 [IO-APIC]) Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC Flags: bus master, medium devsel, latency 0 Memory at e3200000 (64-bit, non-prefetchable) 0000:08:03.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 64 Memory at e3201000 (64-bit, non-prefetchable) Bus: primary=08, secondary=13, subordinate=1b, sec-latency=64 Memory behind bridge: e3400000-e34fffff Prefetchable memory behind bridge: 00000000eb800000-00000000f7f00000 Capabilities: [a0] Capabilities: [b8] #08 [8000] Capabilities: [90] #0c [0009] Capabilities: [98] Power Management version 2 Capabilities: [c0] #08 [0043] 0000:08:03.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (prog-if 10 [IO-APIC]) Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC Flags: bus master, medium devsel, latency 0 Memory at e3202000 (64-bit, non-prefetchable) 0000:08:04.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 64 Memory at e3203000 (64-bit, non-prefetchable) Bus: primary=08, secondary=1c, subordinate=23, sec-latency=64 Capabilities: [a0] Capabilities: [b8] #08 [8000] Capabilities: [90] #0c [0009] Capabilities: [98] Power Management version 2 0000:08:04.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (prog-if 10 [IO-APIC]) Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC Flags: bus master, medium devsel, latency 0 Memory at e3204000 (64-bit, non-prefetchable) 0000:0e:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fu sion-MPT Dual Ultra320 SCSI (rev 07) Subsystem: Advanced Micro Devices [AMD]: Unknown device 2b80 Flags: bus master, 66Mhz, medium devsel, latency 136, IRQ 29 I/O ports at 3000 Memory at e3310000 (64-bit, non-prefetchable) [size=64K] Memory at e3300000 (64-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 2 Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable - Capabilities: [68] 0000:0e:01.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fu sion-MPT Dual Ultra320 SCSI (rev 07) Subsystem: Advanced Micro Devices [AMD]: Unknown device 2b80 Flags: bus master, 66Mhz, medium devsel, latency 136, IRQ 30 I/O ports at 3400 Memory at e3330000 (64-bit, non-prefetchable) [size=64K] Memory at e3320000 (64-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 2 Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable - Capabilities: [68] 0000:0e:03.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03) Subsystem: Advanced Micro Devices [AMD]: Unknown device 2b80 Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 31 Memory at e3350000 (64-bit, non-prefetchable) Memory at e3340000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Capabilities: [48] Power Management version 2 Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable - 0000:0e:03.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03) Subsystem: Advanced Micro Devices [AMD]: Unknown device 2b80 Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 28 Memory at e3370000 (64-bit, non-prefetchable) Memory at e3360000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Capabilities: [48] Power Management version 2 Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable - 0000:13:01.0 PCI bridge: Mellanox Technology MT23108 InfiniHost HCA bridge (rev a1) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, slow devsel, latency 64 Bus: primary=13, secondary=14, subordinate=14, sec-latency=68 Memory behind bridge: e3400000-e34fffff Prefetchable memory behind bridge: 00000000eb800000-00000000f7f00000 Capabilities: [70] PCI-X bridge device. 0000:14:00.0 InfiniBand: Mellanox Technology MT23108 InfiniHost HCA (rev a1) Subsystem: Mellanox Technology MT23108 InfiniHost HCA Flags: bus master, 66Mhz, slow devsel, latency 64, IRQ 33 Memory at e3400000 (64-bit, non-prefetchable) Memory at eb800000 (64-bit, prefetchable) [size=8M] Memory at f0000000 (64-bit, prefetchable) [size=128M] Capabilities: [40] #11 [001f] Capabilities: [50] Vital Product Data Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/5 Enable - Capabilities: [70] PCI-X non-bridge device. In short, I don't think this is specifically a dual-core problem. I think it is more likely related to this particular motherboard or system configuration in some way. Please let me know if you need any additional information on this.
Just did a full stage 1 install from the 2005.1-pre2 cd using stage1-amd64-2005.1-pre3.tar.bz2, no problems whatsoever: --info below Gentoo Base System version 1.6.13 Portage 2.0.51.22-r2 (default-linux/amd64/2005.1, gcc-3.4.3, glibc-2.3.5-r0, 2.6.12-gentoo-r6 x86_64) ================================================================= System uname: 2.6.12-gentoo-r6 x86_64 AMD Athlon(tm) 64 Processor 3200+ dev-lang/python: 2.3.5 sys-apps/sandbox: 1.2.11 sys-devel/autoconf: 2.13, 2.59-r6 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.5 sys-devel/binutils: 2.15.92.0.2-r10 sys-devel/libtool: 1.5.18-r1 virtual/os-headers: 2.6.11-r2 ACCEPT_KEYWORDS="amd64" AUTOCLEAN="yes" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-O2 -march=k8 -pipe" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3/share/config /usr/share/config /var/qmail/control" CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d" CXXFLAGS="-O2 -march=k8 -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="autoconfig distlocks sandbox sfperms strict" GENTOO_MIRRORS="http://mirrors.acm.cs.rpi.edu/gentoo/" MAKEOPTS="-j2" PKGDIR="/usr/portage/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="amd64 X alsa avi berkdb bitmap-fonts crypt cups encode foomaticdb fortran gif gpm gtk gtk2 imlib ipv6 jpeg lzw lzw-tiff mp3 mpeg ncur ses nls nptl nptlonly opengl pam pdflib perl png python qt quicktime readline sata sdl spell ssl tcpd tiff truetype-fonts type1-fonts usb userlocales xpm xv zlib userland_GNU kernel_linux elibc_glibc" Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTDIR_OVERLAY
Did another full stage one install on the 2005.1-pre3 iso and stage1-amd64-2005.1-pre3.tar.bz2. To get net working, I had to stop/start /etc/init.d/net.eth0, but otherwise - no problems. emerge --info below: Portage 2.0.51.22-r2 (default-linux/amd64/2005.1, gcc-3.4.3, glibc-2.3.5-r0, 2.6.12-gentoo-r6 x86_64) ================================================================= System uname: 2.6.12-gentoo-r6 x86_64 Gentoo Base System version 1.6.13 dev-lang/python: 2.3.5 sys-apps/sandbox: 1.2.11 sys-devel/autoconf: 2.13, 2.59-r6 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.5 sys-devel/binutils: 2.15.92.0.2-r10 sys-devel/libtool: 1.5.18-r1 virtual/os-headers: 2.6.11-r2 ACCEPT_KEYWORDS="amd64" AUTOCLEAN="yes" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-O2 -march=k8 -pipe" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3.3/env /usr/kde/3.3/share/config /usr/kde/3.3/shutdown /usr/kde/3.4/env /usr/kde/3.4/share/config /usr/kde/3.4/shutdown /usr/kde/3/share/config /usr/lib/X11/xkb /usr/share/config /usr/share/texmf/dvipdfm/config/ /usr/share/texmf/dvips/config/ /usr/share/texmf/tex/generic/config/ /usr/share/texmf/tex/platex/config/ /usr/share/texmf/xdvi/ /var/qmail/control" CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d" CXXFLAGS="-O2 -march=k8 -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="autoconfig distlocks sandbox sfperms strict" GENTOO_MIRRORS="http://mirrors.acm.cs.rpi.edu/gentoo/" MAKEOPTS="-j2" PKGDIR="/usr/portage/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="amd64 X alsa avi berkdb bitmap-fonts crypt cups encode foomaticdb fortran gif gnome gpm gtk gtk2 imlib ipv6 jpeg kde lzw lzw-tiff mp3 mpeg ncurses nls opengl pam pdflib perl png python qt quicktime readline sdl spell ssl tcpd tiff truetype-fonts type1-fonts usb userlocales xpm xv zlib userland_GNU kernel_linux elibc_glibc" Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTDIR_OVERLAY
I did a full install from stage3 with -pre3, and it worked without any problems. I have a compaq v2000z turion laptop that's so new most of it's hardware doesn't have lspci output. The only issue I've had was that I needed ati-drivers 8.13.4, rather than 8.14.13-r1, but that's hardly a 2005.1 issue. Here's my emerge info: Portage 2.0.51.22-r2 (default-linux/amd64/2005.1, gcc-3.4.4, glibc-2.3.5-r1, 2.6.12-gentoo-r6 x86_64) ================================================================= System uname: 2.6.12-gentoo-r6 x86_64 AMD Turion(tm) 64 Mobile Technology ML-28 Gentoo Base System version 1.6.13 distcc 2.18.3 x86_64-pc-linux-gnu (protocols 1 and 2) (default port 3632) [disabled] ccache version 2.4 [enabled] dev-lang/python: 2.3.5, 2.4.1-r1 sys-apps/sandbox: 1.2.11 sys-devel/autoconf: 2.13, 2.59-r7 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6 sys-devel/binutils: 2.16.1 sys-devel/libtool: 1.5.18-r1 virtual/os-headers: 2.6.11-r2 ACCEPT_KEYWORDS="amd64 ~amd64" AUTOCLEAN="yes" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=athlon64 -O2 -pipe" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3/share/config /usr/lib/X11/xkb /usr/lib64/mozilla/defaults/pref /usr/share/config /var/qmail/control" CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d" CXXFLAGS="-march=athlon64 -O2 -pipe" DISTDIR="/home/portage/distfiles" FEATURES="autoconfig ccache cvs distlocks sandbox sfperms sign strict" GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/Linux/distributions/gentoo" MAKEOPTS="-j7" PKGDIR="/usr/portage/packages" PORTAGE_TMPDIR="/home/portage" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/home/portage/overlays/dang" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="amd64 X aac aalib acpi alsa apache2 artworkextra avi bash-completion berkdb bitmap-fonts cdr crypt cscope cups curl db2 dbus dga directfb dvd eds encode esd ethereal evo fam flac font-server foomaticdb gd gdbm gif gimpprint gnome gnutls gphoto2 gstreamer gtk gtk2 gtkhtml guile hal howl imagemagick imap imlib ipv6 jabber jpeg ldap lesstif libg++ libwww lzo lzw lzw-tiff mad matroska mikmod mime mmap mng motif mozilla mp3 mpeg mpi ncurses nls nptl offensive ogg oggvorbis opengl oscar pam pcmcia pda pdflib perl png python qemu-fast quicktime readline real rtc samba sdl sharedmem slang soap softmmu speex spell ssl svg tcpd theora tiff truetype truetype-fonts type1-fonts unicode usb userlocales vorbis wmf xface xml2 xpm xsl xv xvid zlib userland_GNU kernel_linux elibc_glibc" Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS
Installed stage1 from the install-amd64-minimal-2005.1.iso, again, no problems Portage 2.0.51.22-r2 (default-linux/amd64/2005.1, gcc-3.4.3, glibc-2.3.5-r0, 2.6.12-gentoo-r6 x86_64) ================================================================= System uname: 2.6.12-gentoo-r6 x86_64 Gentoo Base System version 1.6.13 dev-lang/python: 2.3.5 sys-apps/sandbox: 1.2.11 sys-devel/autoconf: 2.13, 2.59-r6 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.5 sys-devel/binutils: 2.15.92.0.2-r10 sys-devel/libtool: 1.5.18-r1 virtual/os-headers: 2.6.11-r2 ACCEPT_KEYWORDS="amd64" AUTOCLEAN="yes" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-O3 -pipe -march=k8 -ftracer" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3.3/env /usr/kde/3.3/share/config /usr/kde/3.3/shutdown /usr/kde/3.4/env /usr/kde/3.4/share/config /usr/kde/3.4/shutdown /usr/kde/3/share/config /usr/lib/X11/xkb /usr/lib64/mozilla/defaults/pref /usr/share/config /usr/share/texmf/dvipdfm/config/ /usr/share/texmf/dvips/config/ /usr/share/texmf/tex/generic/config/ /usr/share/texmf/tex/platex/config/ /usr/share/texmf/xdvi/ /var/qmail/control" CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d" CXXFLAGS="-O3 -pipe -march=k8 -ftracer" DISTDIR="/usr/portage/distfiles" FEATURES="autoconfig distlocks sandbox sfperms strict" GENTOO_MIRRORS="http://mirrors.acm.cs.rpi.edu/gentoo/" MAKEOPTS="-j2" PKGDIR="/usr/portage/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="amd64 X alsa avi berkdb bitmap-fonts crypt cups encode foomaticdb fortran gif gpm gtk gtk2 imlib ipv6 jpeg lzw lzw-tiff mp3 mpeg ncurses nls nptl nptlonly opengl pam pdflib perl png python qt quicktime readline sdl spell ssl tcpd tiff truetype-fonts type1-fonts usb userlocales xpm xv zlib userland_GNU kernel_linux elibc_glibc" Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTDIR_OVERLAY
2005.1 has been released, closing
