I have just attached a 250gb LaCie d2 Hard Drive Extreme Tripple via USB (FullSpeed mode; I know that's silly slow). The drive hotplugs fine, it mounts fine, I can edit the partition map, format (small partitions only) and transfer (small) files (only) fairly well. But if any transaction becomes too big, it will hard lock the system. There's no network activity, console activity, or blinky lights. Nothing seems to get logged. This happens using both genkernel built kernel-2.6.11-gentoo-r9 and kernel- 2.6.11-gentoo-r5. I will include the config, the dmesgs and the emerge info (though I think the latter isn't useful). I am not using the experimental ub driver. Reproducible: Always Steps to Reproduce: CASE 1, mkfs.xfs /dev/sda1 #where dev/sda1 is a 250GB partition CASE 2, (on a 10gb xfs partition) cp a file that's 64mb or more onto the mounted drive. Actual Results: CASE 1: The drive blinked that it was busy; it kept blinking that (with out making any discernable noise) for 8 hours. Unplugging USB had no effect. The console was unresponsive, the network interface wouldn't respond to pings. there were no messages from the kernel. CASE 2: the drive blinked that it was busy for about an hour; after the first 15 second the network interface stopped responding to pings; no console messages were printed. Expected Results: format or mount the drive and return system functionality. the kernel CONFIG (a genkernel build with udev initrd fb splash and oldconfig from a boot CD): # # Automatically generated make config: don't edit # Linux kernel version: 2.6.11-gentoo-r9 # Tue May 24 09:44:54 2005 # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y # # General setup # CONFIG_LOCALVERSION="" CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_LOG_BUF_SHIFT=15 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set CONFIG_MPENTIUMII=y # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y # CONFIG_HPET_TIMER is not set # CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_X86_UP_APIC is not set CONFIG_X86_TSC=y # CONFIG_X86_MCE is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_HIGHMEM=y # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set # CONFIG_REGPARM is not set # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_SOFTWARE_SUSPEND is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y # CONFIG_ACPI_SLEEP is not set CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m CONFIG_ACPI_ASUS=m CONFIG_ACPI_IBM=m CONFIG_ACPI_TOSHIBA=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_X86_PM_TIMER is not set CONFIG_ACPI_CONTAINER=m # # APM (Advanced Power Management) BIOS Support # CONFIG_APM=m # CONFIG_APM_IGNORE_USER_SUSPEND is not set CONFIG_APM_DO_ENABLE=y # CONFIG_APM_CPU_IDLE is not set # CONFIG_APM_DISPLAY_BLANK is not set # CONFIG_APM_RTC_IS_GMT is not set # CONFIG_APM_ALLOW_INTS is not set CONFIG_APM_REAL_MODE_POWER_OFF=y # # CPU Frequency scaling # CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=m # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_TABLE=y # # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=m CONFIG_X86_POWERNOW_K6=m CONFIG_X86_POWERNOW_K7=m CONFIG_X86_POWERNOW_K7_ACPI=y CONFIG_X86_POWERNOW_K8=m CONFIG_X86_POWERNOW_K8_ACPI=y CONFIG_X86_GX_SUSPMOD=m CONFIG_X86_SPEEDSTEP_CENTRINO=m # CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI is not set CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y CONFIG_X86_SPEEDSTEP_ICH=m CONFIG_X86_SPEEDSTEP_SMI=m CONFIG_X86_P4_CLOCKMOD=m CONFIG_X86_CPUFREQ_NFORCE2=m CONFIG_X86_LONGRUN=m CONFIG_X86_LONGHAUL=m # # shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set CONFIG_X86_SPEEDSTEP_LIB=m # CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCIEPORTBUS=y # CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_NAMES is not set CONFIG_ISA=y CONFIG_EISA=y CONFIG_EISA_VLB_PRIMING=y CONFIG_EISA_PCI_EISA=y CONFIG_EISA_VIRTUAL_ROOT=y # CONFIG_EISA_NAMES is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # # PCCARD (PCMCIA/CardBus) support # CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m CONFIG_CARDBUS=y # # PC-card bridges # CONFIG_YENTA=m CONFIG_PD6729=m CONFIG_I82092=m CONFIG_I82365=m CONFIG_TCIC=m CONFIG_PCMCIA_PROBE=y CONFIG_PCCARD_NONSTATIC=m # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_PC_CML1=m CONFIG_PARPORT_SERIAL=m CONFIG_PARPORT_PC_FIFO=y CONFIG_PARPORT_PC_SUPERIO=y CONFIG_PARPORT_PC_PCMCIA=m # CONFIG_PARPORT_OTHER is not set CONFIG_PARPORT_1284=y # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_ISAPNP=y # CONFIG_PNPBIOS is not set CONFIG_PNPACPI=y # # Block devices # CONFIG_BLK_DEV_FD=m CONFIG_BLK_DEV_XD=m CONFIG_PARIDE=m CONFIG_PARIDE_PARPORT=m # # Parallel IDE high-level drivers # CONFIG_PARIDE_PD=m CONFIG_PARIDE_PCD=m CONFIG_PARIDE_PF=m CONFIG_PARIDE_PT=m CONFIG_PARIDE_PG=m # # Parallel IDE protocol modules # CONFIG_PARIDE_ATEN=m CONFIG_PARIDE_BPCK=m CONFIG_PARIDE_BPCK6=m CONFIG_PARIDE_COMM=m CONFIG_PARIDE_DSTR=m CONFIG_PARIDE_FIT2=m CONFIG_PARIDE_FIT3=m CONFIG_PARIDE_EPAT=m CONFIG_PARIDE_EPATC8=y CONFIG_PARIDE_EPIA=m CONFIG_PARIDE_FRIQ=m CONFIG_PARIDE_FRPW=m CONFIG_PARIDE_KBIC=m CONFIG_PARIDE_KTTI=m CONFIG_PARIDE_ON20=m CONFIG_PARIDE_ON26=m CONFIG_BLK_CPQ_DA=m CONFIG_BLK_CPQ_CISS_DA=m CONFIG_CISS_SCSI_TAPE=y CONFIG_BLK_DEV_DAC960=m CONFIG_BLK_DEV_UMEM=m # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_SX8=m # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_LBD=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set CONFIG_IOSCHED_DEADLINE=y # CONFIG_IOSCHED_CFQ is not set CONFIG_ATA_OVER_ETH=m # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECS=m CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDETAPE=m CONFIG_BLK_DEV_IDEFLOPPY=m # CONFIG_BLK_DEV_IDESCSI is not set CONFIG_IDE_TASK_IOCTL=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y CONFIG_BLK_DEV_CMD640=y CONFIG_BLK_DEV_CMD640_ENHANCED=y CONFIG_BLK_DEV_IDEPNP=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y CONFIG_BLK_DEV_OPTI621=y CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_AEC62XX=y CONFIG_BLK_DEV_ALI15X3=y # CONFIG_WDC_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y CONFIG_BLK_DEV_ATIIXP=y CONFIG_BLK_DEV_CMD64X=y CONFIG_BLK_DEV_TRIFLEX=y CONFIG_BLK_DEV_CY82C693=y CONFIG_BLK_DEV_CS5520=y CONFIG_BLK_DEV_CS5530=y CONFIG_BLK_DEV_HPT34X=y # CONFIG_HPT34X_AUTODMA is not set CONFIG_BLK_DEV_HPT366=y CONFIG_BLK_DEV_SC1200=y CONFIG_BLK_DEV_PIIX=y CONFIG_BLK_DEV_NS87415=y CONFIG_BLK_DEV_PDC202XX_OLD=y # CONFIG_PDC202XX_BURST is not set CONFIG_BLK_DEV_PDC202XX_NEW=y CONFIG_PDC202XX_FORCE=y CONFIG_BLK_DEV_SVWKS=y CONFIG_BLK_DEV_SIIMAGE=m CONFIG_BLK_DEV_SIS5513=y CONFIG_BLK_DEV_SLC90E66=y CONFIG_BLK_DEV_TRM290=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_IDE_ARM is not set CONFIG_IDE_CHIPSETS=y # # Note: most of these also require special kernel boot parameters # CONFIG_BLK_DEV_4DRIVES=y CONFIG_BLK_DEV_ALI14XX=y CONFIG_BLK_DEV_DTC2278=y CONFIG_BLK_DEV_HT6560B=y CONFIG_BLK_DEV_QD65XX=y CONFIG_BLK_DEV_UMC8672=y CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDEDMA_IVB=y CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m # # SCSI low-level drivers # CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_7000FASST=m CONFIG_SCSI_ACARD=m CONFIG_SCSI_AHA152X=m CONFIG_SCSI_AHA1542=m CONFIG_SCSI_AHA1740=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=5000 CONFIG_AIC7XXX_PROBE_EISA_VL=y # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC7XXX_OLD is not set CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=32 CONFIG_AIC79XX_RESET_DELAY_MS=5000 # CONFIG_AIC79XX_ENABLE_RD_STRM is not set # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 CONFIG_AIC79XX_REG_PRETTY_PRINT=y CONFIG_SCSI_DPT_I2O=m CONFIG_SCSI_IN2000=m CONFIG_MEGARAID_NEWGEN=y CONFIG_MEGARAID_MM=m CONFIG_MEGARAID_MAILBOX=m CONFIG_SCSI_SATA=y CONFIG_SCSI_SATA_AHCI=m CONFIG_SCSI_SATA_SVW=m CONFIG_SCSI_ATA_PIIX=m CONFIG_SCSI_SATA_NV=m CONFIG_SCSI_PATA_PDC2027X=m CONFIG_SCSI_SATA_PROMISE=m CONFIG_SCSI_SATA_QSTOR=m CONFIG_SCSI_SATA_SX4=m CONFIG_SCSI_SATA_SIL=m CONFIG_SCSI_SATA_SIS=m CONFIG_SCSI_SATA_ULI=m CONFIG_SCSI_SATA_VIA=m CONFIG_SCSI_SATA_VITESSE=m CONFIG_SCSI_BUSLOGIC=m # CONFIG_SCSI_OMIT_FLASHPOINT is not set CONFIG_SCSI_DMX3191D=m CONFIG_SCSI_DTC3280=m CONFIG_SCSI_EATA=m CONFIG_SCSI_EATA_TAGGED_QUEUE=y CONFIG_SCSI_EATA_LINKED_COMMANDS=y CONFIG_SCSI_EATA_MAX_TAGS=16 # CONFIG_SCSI_EATA_PIO is not set CONFIG_SCSI_FUTURE_DOMAIN=m CONFIG_SCSI_GDTH=m # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set CONFIG_SCSI_IPS=m CONFIG_SCSI_INITIO=m CONFIG_SCSI_INIA100=m CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set CONFIG_SCSI_NCR53C406A=m CONFIG_53C700_IO_MAPPED=y CONFIG_SCSI_SYM53C8XX_2=m CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set CONFIG_SCSI_IPR=m # CONFIG_SCSI_IPR_TRACE is not set # CONFIG_SCSI_IPR_DUMP is not set CONFIG_SCSI_PAS16=m CONFIG_SCSI_PSI240I=m CONFIG_SCSI_QLOGIC_FAS=m CONFIG_SCSI_QLOGIC_ISP=m CONFIG_SCSI_QLOGIC_FC=m # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set CONFIG_SCSI_QLOGIC_1280=m CONFIG_SCSI_QLOGIC_1280_1040=y CONFIG_SCSI_QLA2XXX=y CONFIG_SCSI_QLA21XX=m CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m CONFIG_SCSI_QLA6312=m CONFIG_SCSI_SIM710=m CONFIG_SCSI_SYM53C416=m CONFIG_SCSI_DC395x=m CONFIG_SCSI_DC390T=m CONFIG_SCSI_T128=m CONFIG_SCSI_U14_34F=m CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y CONFIG_SCSI_U14_34F_MAX_TAGS=8 CONFIG_SCSI_ULTRASTOR=m CONFIG_SCSI_NSP32=m # CONFIG_SCSI_DEBUG is not set # # PCMCIA SCSI adapter support # CONFIG_PCMCIA_AHA152X=m CONFIG_PCMCIA_FDOMAIN=m CONFIG_PCMCIA_NINJA_SCSI=m CONFIG_PCMCIA_QLOGIC=m CONFIG_PCMCIA_SYM53C500=m # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID5=m CONFIG_MD_RAID6=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m # # Fusion MPT device support # CONFIG_FUSION=m CONFIG_FUSION_MAX_SGE=40 CONFIG_FUSION_CTL=m CONFIG_FUSION_LAN=m # # IEEE 1394 (FireWire) support # CONFIG_IEEE1394=m # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set # CONFIG_IEEE1394_OUI_DB is not set CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y CONFIG_IEEE1394_CONFIG_ROM_IP1394=y # # Device Drivers # # # Texas Instruments PCILynx requires I2C # CONFIG_IEEE1394_OHCI1394=m # # Protocol Drivers # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m CONFIG_IEEE1394_CMP=m # CONFIG_IEEE1394_AMDTP is not set # # I2O device support # CONFIG_I2O=m CONFIG_I2O_CONFIG=m CONFIG_I2O_BLOCK=m CONFIG_I2O_SCSI=m CONFIG_I2O_PROC=m # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set CONFIG_IP_TCPDIAG=y # CONFIG_IP_TCPDIAG_IPV6 is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m # CONFIG_NETFILTER is not set CONFIG_XFRM=y CONFIG_XFRM_USER=m # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set CONFIG_VLAN_8021Q=m # CONFIG_DECNET is not set CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y # CONFIG_BT_CMTP is not set CONFIG_BT_HIDP=m # # Bluetooth device drivers # CONFIG_BT_HCIUSB=m CONFIG_BT_HCIUSB_SCO=y CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIUART_BCSP_TXCRC=y CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIDTL1=m CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set CONFIG_NET_SB1000=m # # ARCnet devices # # CONFIG_ARCNET is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_HAPPYMEAL=m CONFIG_SUNGEM=m CONFIG_NET_VENDOR_3COM=y CONFIG_EL1=m CONFIG_EL2=m CONFIG_ELPLUS=m CONFIG_EL16=m CONFIG_EL3=m CONFIG_3C515=m CONFIG_VORTEX=m CONFIG_TYPHOON=m CONFIG_LANCE=m CONFIG_NET_VENDOR_SMC=y CONFIG_WD80x3=m CONFIG_ULTRA=m CONFIG_ULTRA32=m CONFIG_SMC9194=m CONFIG_NET_VENDOR_RACAL=y # CONFIG_NI5010 is not set CONFIG_NI52=m CONFIG_NI65=m # # Tulip family network device support # CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_TULIP=m CONFIG_TULIP_MWI=y CONFIG_TULIP_MMIO=y CONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m CONFIG_PCMCIA_XIRCOM=m # CONFIG_PCMCIA_XIRTULIP is not set CONFIG_AT1700=m CONFIG_DEPCA=m CONFIG_HP100=m CONFIG_NET_ISA=y CONFIG_E2100=m CONFIG_EWRK3=m CONFIG_EEXPRESS=m CONFIG_EEXPRESS_PRO=m CONFIG_HPLAN_PLUS=m CONFIG_HPLAN=m CONFIG_LP486E=m CONFIG_ETH16I=m CONFIG_NE2000=m CONFIG_ZNET=m CONFIG_SEEQ8005=m CONFIG_NET_PCI=y CONFIG_PCNET32=m CONFIG_AMD8111_ETH=m # CONFIG_AMD8111E_NAPI is not set CONFIG_ADAPTEC_STARFIRE=m # CONFIG_ADAPTEC_STARFIRE_NAPI is not set CONFIG_AC3200=m CONFIG_APRICOT=m CONFIG_B44=m CONFIG_FORCEDETH=m CONFIG_CS89x0=m CONFIG_DGRS=m # CONFIG_EEPRO100 is not set CONFIG_E100=m # CONFIG_E100_NAPI is not set CONFIG_LNE390=m CONFIG_FEALNX=m CONFIG_NATSEMI=m CONFIG_NE2K_PCI=m CONFIG_NE3210=m CONFIG_ES3210=m CONFIG_8139CP=m CONFIG_8139TOO=m # CONFIG_8139TOO_PIO is not set CONFIG_8139TOO_TUNE_TWISTER=y CONFIG_8139TOO_8129=y # CONFIG_8139_OLD_RX_RESET is not set CONFIG_SIS900=m CONFIG_EPIC100=m CONFIG_SUNDANCE=m CONFIG_SUNDANCE_MMIO=y CONFIG_TLAN=m CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y CONFIG_NET_POCKET=y CONFIG_ATP=m CONFIG_DE600=m CONFIG_DE620=m # # Ethernet (1000 Mbit) # CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=m CONFIG_E1000=m # CONFIG_E1000_NAPI is not set CONFIG_NS83820=m CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m CONFIG_R8169=m # CONFIG_R8169_NAPI is not set CONFIG_R8169_VLAN=y CONFIG_SKGE=m # CONFIG_SK98LIN is not set CONFIG_VIA_VELOCITY=m CONFIG_TIGON3=m # # Ethernet (10000 Mbit) # CONFIG_IXGB=m # CONFIG_IXGB_NAPI is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set # CONFIG_2BUFF_MODE is not set # # Token Ring devices # CONFIG_TR=y CONFIG_IBMTR=m CONFIG_IBMOL=m CONFIG_IBMLS=m CONFIG_3C359=m CONFIG_TMS380TR=m CONFIG_TMSPCI=m CONFIG_SKISA=m CONFIG_PROTEON=m CONFIG_ABYSS=m CONFIG_SMCTR=m # # Wireless LAN (non-hamradio) # CONFIG_NET_RADIO=y # # Obsolete Wireless cards support (pre-802.11) # CONFIG_STRIP=m CONFIG_ARLAN=m CONFIG_WAVELAN=m CONFIG_PCMCIA_WAVELAN=m CONFIG_PCMCIA_NETWAVE=m # # Wireless 802.11 Frequency Hopping cards support # CONFIG_PCMCIA_RAYCS=m # # Wireless 802.11b ISA/PCI cards support # CONFIG_AIRO=m CONFIG_HERMES=m CONFIG_PLX_HERMES=m CONFIG_TMD_HERMES=m CONFIG_PCI_HERMES=m CONFIG_ATMEL=m CONFIG_PCI_ATMEL=m # # Wireless 802.11b Pcmcia/Cardbus cards support # CONFIG_PCMCIA_HERMES=m CONFIG_AIRO_CS=m CONFIG_PCMCIA_ATMEL=m CONFIG_PCMCIA_WL3501=m # # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # CONFIG_PRISM54=m CONFIG_NET_WIRELESS=y # # PCMCIA network device support # CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m CONFIG_PCMCIA_FMVJ18X=m CONFIG_PCMCIA_PCNET=m CONFIG_PCMCIA_NMCLAN=m CONFIG_PCMCIA_SMC91C92=m CONFIG_PCMCIA_XIRC2PS=m CONFIG_PCMCIA_AXNET=m CONFIG_PCMCIA_IBMTR=m # # Wan interfaces # CONFIG_WAN=y CONFIG_HOSTESS_SV11=m CONFIG_COSA=m CONFIG_DSCC4=m CONFIG_DSCC4_PCISYNC=y CONFIG_DSCC4_PCI_RST=y CONFIG_LANMEDIA=m CONFIG_SEALEVEL_4021=m CONFIG_SYNCLINK_SYNCPPP=m CONFIG_HDLC=m CONFIG_HDLC_RAW=y CONFIG_HDLC_RAW_ETH=y CONFIG_HDLC_CISCO=y CONFIG_HDLC_FR=y CONFIG_HDLC_PPP=y # # X.25/LAPB support is disabled # CONFIG_PCI200SYN=m CONFIG_WANXL=m CONFIG_PC300=m CONFIG_PC300_MLPPP=y CONFIG_N2=m CONFIG_C101=m CONFIG_FARSYNC=m CONFIG_DLCI=m CONFIG_DLCI_COUNT=24 CONFIG_DLCI_MAX=8 CONFIG_SDLA=m CONFIG_SBNI=m CONFIG_SBNI_MULTILINE=y CONFIG_FDDI=y CONFIG_DEFXX=m CONFIG_SKFP=m CONFIG_HIPPI=y CONFIG_ROADRUNNER=m # CONFIG_ROADRUNNER_LARGE_RINGS is not set CONFIG_PLIP=m CONFIG_PPP=m CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPPOE=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y CONFIG_NET_FC=y # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # # ISDN subsystem # CONFIG_ISDN=y # # Old ISDN4Linux # # CONFIG_ISDN_I4L is not set # # CAPI subsystem # CONFIG_ISDN_CAPI=y # CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_ISDN_CAPI_CAPI20=m CONFIG_ISDN_CAPI_CAPIFS_BOOL=y CONFIG_ISDN_CAPI_CAPIFS=m # # CAPI hardware drivers # # # Active AVM cards # CONFIG_CAPI_AVM=y CONFIG_ISDN_DRV_AVMB1_B1ISA=m CONFIG_ISDN_DRV_AVMB1_B1PCI=m CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y CONFIG_ISDN_DRV_AVMB1_T1ISA=m CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m CONFIG_ISDN_DRV_AVMB1_AVM_CS=m CONFIG_ISDN_DRV_AVMB1_T1PCI=m CONFIG_ISDN_DRV_AVMB1_C4=m # # Active Eicon DIVA Server cards # CONFIG_CAPI_EICON=y CONFIG_ISDN_DIVAS=m CONFIG_ISDN_DIVAS_BRIPCI=y CONFIG_ISDN_DIVAS_PRIPCI=y CONFIG_ISDN_DIVAS_DIVACAPI=m CONFIG_ISDN_DIVAS_USERIDI=m CONFIG_ISDN_DIVAS_MAINT=m # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=m CONFIG_SERIO_CT82C710=m CONFIG_SERIO_PARKBD=m CONFIG_SERIO_PCIPS2=m CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y CONFIG_KEYBOARD_SUNKBD=m CONFIG_KEYBOARD_LKKBD=m CONFIG_KEYBOARD_XTKBD=m CONFIG_KEYBOARD_NEWTON=m CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_INPORT=m CONFIG_MOUSE_ATIXL=y CONFIG_MOUSE_LOGIBM=m CONFIG_MOUSE_PC110PAD=m # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_ACPI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_MULTIPORT=y CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_PRINTER is not set CONFIG_PPDEV=m # CONFIG_TIPAR is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=m CONFIG_RTC=m # CONFIG_GEN_RTC is not set CONFIG_DTLK=m # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # CONFIG_DRM is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set CONFIG_MWAVE=m CONFIG_RAW_DRIVER=m # CONFIG_HPET is not set CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set # # I2C support # # CONFIG_I2C is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Misc devices # # CONFIG_IBM_ASM is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set CONFIG_FB_VESA=y # CONFIG_FB_VESA_STD is not set CONFIG_FB_VESA_TNG=y CONFIG_FB_VESA_DEFAULT_MODE="1280x1024@60" CONFIG_VIDEO_SELECT=y # CONFIG_FB_HGA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I810 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # # Logo configuration # CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set CONFIG_FB_SPLASH=y # # Speakup console speech # CONFIG_SPEAKUP=y CONFIG_SPEAKUP_ACNTSA=y CONFIG_SPEAKUP_ACNTPC=y CONFIG_SPEAKUP_APOLLO=y CONFIG_SPEAKUP_AUDPTR=y CONFIG_SPEAKUP_BNS=y CONFIG_SPEAKUP_DECTLK=y CONFIG_SPEAKUP_DECEXT=y # CONFIG_SPEAKUP_DECPC is not set CONFIG_SPEAKUP_DTLK=y CONFIG_SPEAKUP_KEYPC=y CONFIG_SPEAKUP_LTLK=y CONFIG_SPEAKUP_SFTSYN=y CONFIG_SPEAKUP_SPKOUT=y CONFIG_SPEAKUP_TXPRT=y # # Enter the 3 to 6 character keyword from the list above, or none for no default synthesizer on boot up. # CONFIG_SPEAKUP_DEFAULT="none" # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # # CONFIG_SND is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB=m # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_OHCI_HCD=m CONFIG_USB_UHCI_HCD=m CONFIG_USB_SL811_HCD=m # # USB Device Class drivers # CONFIG_USB_AUDIO=m # # USB Bluetooth TTY can only be used with disabled Bluetooth subsystem # # CONFIG_USB_MIDI is not set CONFIG_USB_ACM=m # CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_RW_DETECT is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_HP8200e=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # # USB Input Devices # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set CONFIG_USB_AIPTEK=m CONFIG_USB_WACOM=m CONFIG_USB_KBTAB=m # CONFIG_USB_POWERMATE is not set CONFIG_USB_MTOUCH=m CONFIG_USB_EGALAX=m CONFIG_USB_XPAD=m CONFIG_USB_ATI_REMOTE=m # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # # Video4Linux support is needed for USB Multimedia device support # # # USB Network Adapters # CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_USBNET=m # # USB Host-to-Host Cables # CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_BELKIN=y CONFIG_USB_GENESYS=y CONFIG_USB_NET1080=y CONFIG_USB_PL2301=y CONFIG_USB_KC2190=y # # Intelligent USB Devices/Gadgets # # CONFIG_USB_ARMLINUX is not set # CONFIG_USB_EPSON2888 is not set # CONFIG_USB_ZAURUS is not set CONFIG_USB_CDCETHER=y # # USB Network Adapters # CONFIG_USB_AX8817X=y # # USB port drivers # CONFIG_USB_USS720=m # # USB Serial Converter support # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set CONFIG_USB_SERIAL_IPW=m # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set CONFIG_USB_SERIAL_OMNINET=m # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set CONFIG_USB_AUERSWALD=m # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_TEST is not set # # USB ATM/DSL drivers # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=m CONFIG_MMC_WBSD=m # # InfiniBand support # CONFIG_INFINIBAND=m CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # # XFS support # CONFIG_XFS_FS=y CONFIG_XFS_EXPORT=y CONFIG_XFS_RT=y CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_QUOTACTL=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y CONFIG_DEVFS_FS=y # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set CONFIG_SQUASHFS=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_SUNRPC=m # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set CONFIG_LDM_PARTITION=y # CONFIG_LDM_DEBUG is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_EFI_PARTITION is not set # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_KPROBES is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_4KSTACKS is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m # CONFIG_CRYPTO_WP512 is not set CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES_586=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices # # CONFIG_CRYPTO_DEV_PADLOCK is not set # # Library routines # CONFIG_CRC_CCITT=m CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=y And the DMESG Linux version 2.6.11-gentoo-r9 (root@tycho) (gcc version 3.3.5-20050130 (Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #1 Tue May 24 10:19:10 EST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 HOLCO ) @ 0x000f7d60 ACPI: RSDT (v001 HOLCO AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000 ACPI: FADT (v001 HOLCO AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040 ACPI: DSDT (v001 HOLCO AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000) Built 1 zonelists Kernel command line: root=/dev/ram0 real_root=/dev/hda3 init=/linuxrc ramdisk_size=8192 video=ywrap,nomtrr,1280x1024-32 splash=silent;theme:emergence udev fbsplash: unrecognized option silent;theme:emergence __iounmap: bad address c00fffd9 Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 400.957 MHz processor. Using tsc for high-res timesource Speakup v-2.00 CVS: Wed Mar 2 20:22:02 EST 2005 : initialized Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 249488k/262080k available (2010k kernel code, 11940k reserved, 540k data, 4848k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 790.52 BogoMIPS (lpj=395264) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Couldn't initialize miscdevice /dev/synth. CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000 CPU: Intel Pentium II (Deschutes) stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 1c00) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 1839k freed NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfb320, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050211 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: Power Resource [PFAN] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. inotify device minor=63 Squashfs 2.1 (released 2004/12/10) (C) 2002-2004 Phillip Lougher devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API Limiting direct PCI/PCI transfers. vesafb: TRIDENT MICROSYSTEMS INC., Blade 3D, J 6.4 (38) (OEM: Trident Blade 3D) vesafb: VBE version: 2.0 vesafb: protected mode interface info at c000:1778 vesafb: pmi: set display start = c00c1780, set palette = c00c1788 vesafb: pmi: ports = eec1 56c3 [A GIANT BLOCK OF STUFF THAT DOESN'T CLEARLY RELATE] vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz vesafb: scrolling: redraw Console: switching to colour frame buffer device 160x64 vesafb: framebuffer at 0xd5800000, mapped to 0xd0880000, using 2560k, total 4096k fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 io scheduler noop registered io scheduler deadline registered RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: QUANTUM FIREBALL CX10.2A, ATA DISK drive hdb: 50X CD-ROM, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: WDC WD200BB-75CLB0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 128KiB hda: 20044080 sectors (10262 MB) w/418KiB Cache, CHS=19885/16/63, UDMA(33) hda: cache flushes not supported /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 hdc: max request size: 128KiB hdc: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(33) hdc: cache flushes not supported /dev/ide/host0/bus1/target0/lun0: p1 p2 hdb: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 CAPI Subsystem Rev 1.1.2.8 EISA: Probing bus 0 at eisa0 Cannot allocate resource for EISA slot 4 Cannot allocate resource for EISA slot 5 EISA: Detected 0 cards. NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 NET: Registered protocol family 17 RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 4848k freed usbcore: registered new driver usbfs usbcore: registered new driver hub usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: irq 10, io base 0xe000 uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) usb 1-2: new full speed USB device using uhci_hcd and address 2 scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning sl811: driver sl811-hcd, 15 Dec 2004 ieee1394: Initialized config rom entry `ip1394' sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org> device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com libata version 1.10 loaded. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Vendor: Maxtor Model: 7Y250P0 Rev: YAR4 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB) sda: assuming drive cache: write through SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB) sda: assuming drive cache: write through /dev/scsi/host0/bus0/target0/lun0: p1 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 usb-storage: device scan complete Adding 506036k swap on /dev/hda2. Priority:-1 extents:1 EXT3 FS on hda3, internal journal ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 12 (level, low) -> IRQ 12 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xe400. Vers LK1.1.19 XFS mounting filesystem sda1 Ending clean XFS mount for filesystem: sda1 EXT3 FS on hda3, internal journal Real Time Clock Driver v1.12 ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 12 (level, low) -> IRQ 12 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] NET: Registered protocol family 10 Disabled Privacy Extensions on device c036e980(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present fbsplash: console 0 using theme 'default' fbsplash: switched splash state to 'on' on console 0 fbsplash: console 1 using theme 'default' fbsplash: switched splash state to 'on' on console 1 fbsplash: console 2 using theme 'default' fbsplash: switched splash state to 'on' on console 2 fbsplash: console 3 using theme 'default' fbsplash: switched splash state to 'on' on console 3 fbsplash: console 4 using theme 'default' fbsplash: switched splash state to 'on' on console 4 fbsplash: console 5 using theme 'default' fbsplash: switched splash state to 'on' on console 5 fbsplash: console 6 using theme 'default' fbsplash: switched splash state to 'on' on console 6 fbsplash: console 7 using theme 'default' fbsplash: switched splash state to 'on' on console 7 fbsplash: console 8 using theme 'default' fbsplash: switched splash state to 'on' on console 8 fbsplash: console 9 using theme 'default' fbsplash: switched splash state to 'on' on console 9 fbsplash: console 10 using theme 'default' fbsplash: switched splash state to 'on' on console 10 cdrom: open failed. cdrom: open failed. ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 12 (level, low) -> IRQ 12 eth0: no IPv6 routers present XFS mounting filesystem hdc1 Ending clean XFS mount for filesystem: hdc1 usb 1-2: USB disconnect, address 2 [I decided not to use the usb drive anymore, and swith to hdc1] and the EMERGE INFO tycho root # emerge --info Portage 2.0.51.19 (default-linux/x86/2005.0, gcc-3.3.5-20050130, glibc- 2.3.4.20041102-r1, 2.6.11-gentoo-r9 i686) ================================================================= System uname: 2.6.11-gentoo-r9 i686 Pentium II (Deschutes) Gentoo Base System version 1.4.16 Python: dev-lang/python-2.3.5 [2.3.5 (#1, May 20 2005, 10:47:42)] dev-lang/python: 2.3.5 sys-apps/sandbox: [Not Present] sys-devel/autoconf: 2.13, 2.59-r6 sys-devel/automake: 1.9.5, 1.5, 1.8.5-r3, 1.6.3, 1.7.9-r1, 1.4_p6 sys-devel/binutils: 2.15.92.0.2-r7 sys-devel/libtool: 1.5.16 virtual/os-headers: 2.6.8.1-r2 ACCEPT_KEYWORDS="x86" AUTOCLEAN="yes" CFLAGS="-O2 -march=i686 -fomit-frame-pointer" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3.3/env /usr/kde/3.3/shar e/config /usr/kde/3.3/shutdown /usr/kde/3/share/config /usr/lib/X11/xkb /usr/sh are/config /usr/share/texmf/dvipdfm/config/ /usr/share/texmf/dvips/config/ /usr /share/texmf/tex/generic/config/ /usr/share/texmf/tex/platex/config/ /usr/share /texmf/xdvi/ /var/qmail/control" CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d" CXXFLAGS="-O2 -march=i686 -fomit-frame-pointer" DISTDIR="/usr/portage/distfiles" FEATURES="autoaddcvs autoconfig ccache distlocks sandbox sfperms strict" GENTOO_MIRRORS="http://gentoo.osuosl.org/ http://adelie.polymtl.ca/ ftp://cs.ubishops.ca/pub/gentoo ftp://ftp.gtlib.cc.gatech.edu/pub/gentoo http://csociety-ftp.ecn.purdue.edu/pub/gentoo/ ftp://csociety- ftp.ecn.purdue.edu/pub/gentoo/ ftp://ftp.ussg.iu.edu/pub/linux/gentoo ftp://ftp.ucsb.edu/pub/mirrors/linux/gentoo/ http://gentoo.seren.com/gentoo http://gentoo.chem.wisc.edu/gentoo/ ftp://gentoo.chem.wisc.edu/gentoo/" MAKEOPTS="-j2" PKGDIR="/usr/portage/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="x86 .eclass X alsa apache2 apm arts avi berkdb bitmap-fonts bzlib cdr crypt cups curl emboss encode esd fam foomaticdb fortran gdbm gif gnome gpm gtk gtk2 imagemagick imlib ipv6 jpeg jpg kde ldap libg++ libwww linux-info mad mikmod mmx motif mp3 mpeg mysql mysqli ncurses nls ogg oggvorbis opengl oss pam pdflib perl php png python qt quicktime readline ruby samba sdl slang spell ssl svga tcpd tetex tiff truetype truetype-fonts type1-fonts vorbis xml xml2 xmms xv zlib userland_GNU kernel_linux elibc_glibc" Unset: ASFLAGS, CBUILD, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTDIR_OVERLAY
Judging by your kernel config, your machine is an old P-II laptop? I'll bet the BIOS has issues with large drives/large partitions (even though it's USB). Or maybe it's some weird APM thing. Stranger things have happened...
In future please use the attachment feature to post large files. Please try and reproduce with development-souces-2.6.12_rc5
It's not a laptop; a regular, yes old, desktop. I suppose it's possible that the USB controller hardware is the buggy party. I havn't any other system to test it with, other than to say the drive on another machine works well. gentoo-dev-sources, a 2.6 kernel patched with bug, security and stability fixes, can now be found under the gentoo-sources package. development-sources, the official 2.6 kernel from kernel.org, can now be found under the vanilla-sources package. I'll give the vanilla sources a try, but I'm not looking forward to this happening again. I shall probably use oldconfig with this current config. Attachments: gottcha.
At that age, it must USB 1 (even 1.0) and things like hard-disks require larger bandwidth for decent speeds (so it might be trying to go too fast, as it were). Other than that, and/or the motherboard BIOS, I'm not sure what to say...
Wait a minute, if it's not a laptop, then turn off the apm support. Also, if it's really that old, then ACPI support is sketchy at best. Have you tried booting the kernel with the noapic and/or the acpi=off flags?
(In reply to comment #5) > booting the kernel with the noapic and/or the acpi=off flags? Okay I'll try that in a moment; I used the config from the gentoo CD I installed from (in /proc) I figured that was pretty universal. I reproduced the same error in Linux 2.6.12-rc5 The second line of my desc covers that this is USB in FullSpeed mode (that's usb 1.0 at 12mbs) and that I'm aware this is the double minus unbest way to use a 250gb hard disk. The issue here is backing up without gonig over the network (lest the network isn't always available). Lets not debate that it's a bad machine and wonder if this kind of hard lock could be affecting other machines besides mine.
If 2.6.12-rc5 is affected then its an upstream issue and not related to Gentoo's releases. Please file a bug for this at http://bugzilla.kernel.org and post the new bug URL here.
(In reply to comment #7) > If 2.6.12-rc5 is affected then its an upstream issue and not related to Gentoo's > releases. Please file a bug for this at http://bugzilla.kernel.org and post the > new bug URL here. The noapic and acpi=off is helpful, but doing a shutdown countdown during a cp to the drive still hangs it. Moved to kernel.org http://bugzilla.kernel.org/show_bug.cgi?id=4717
so far <a href="http://bugzilla.kernel.org/show_bug.cgi?id=4717">no interest</a> from kernel.org. Not exactly a resolution. I wish I had the time to persue this; Is there a kernel debugger than I can interupt my way into during was I presume to be an infinate loop in the kernel?
You can try the NMI watchdog. You could also bring more attention to this issue by sending a complete report to the linux-usb-devel and usb-storage mailing lists. You could also confirm if the issue still exists in the latest -mm kernel.
Looks like this issue is solved upstream. Since there have been a lot of USB changes, I think its best to wait for 2.6.13 to be released rather than try to backport the changes. Please remember to close the upstream bug when you are happy the issue has gone away :)
