I'm correct this, and i adding bonding function. See french link http://fr.gentoo-wiki.com/HOWTO_Accouplement_d%27interfaces_r%C3%A9seau Reproducible: Always Steps to Reproduce: 1. 2. 3. Actual Results: Patch : #!/sbin/runscript # Copyright 1999-2004 Gentoo Technologies, Inc. # Distributed under the terms of the GNU General Public License v2 # $Header: /home/cvsroot/gentoo-src/rc-scripts/init.d/net.eth0,v 1.41 2004/05/10 14:16:35 agriffis Exp $ #NB: Config is in /etc/conf.d/net if [[ -n $NET_DEBUG ]]; then set -x devnull=/dev/stderr else devnull=/dev/null fi # For pcmcia users. note that pcmcia must be added to the same # runlevel as the net.* script that needs it. depend() { use hotplug pcmcia } checkconfig() { if [[ -z "${ifconfig_IFACE}" ]]; then eerror "Please make sure that /etc/conf.d/net has \$ifconfig_$IFACE set" eerror "(or \$iface_$IFACE for old-style configuration)" return 1 fi if [[ -n "${vlans_IFACE}" && ! -x /sbin/vconfig ]]; then eerror "For VLAN (802.1q) support, emerge net-misc/vconfig" return 1 fi if [[ -n "${bonding_IFACE}" && ! -x /sbin/ifenslave ]]; then eerror "For Bonding support, emerge net-misc/ifenslave" return 1 fi } # Fix bug 50039 (init.d/net.eth0 localization) # Some other commands in this script might need to be wrapped, but # we'll get them one-by-one. Note that LC_ALL trumps LC_anything_else # according to locale(7) ifconfig() { LC_ALL=C /sbin/ifconfig "$@" } # setup_vars: setup variables based on $1 and content of /etc/conf.d/net # The following variables are set, which should be declared local by # the calling routine. # status_IFACE (up or '') # vlans_IFACE (space-separated list) # ifconfig_IFACE (array of ifconfig lines, replaces iface_IFACE) # dhcpcd_IFACE (command-line args for dhcpcd) # routes_IFACE (array of route lines) # inet6_IFACE (array of inet6 lines) # ifconfig_fallback_IFACE (fallback ifconfig if dhcp fails) # bonding_IFACE (array of ethernets networks cards bonding) setup_vars() { local i iface="${1//\./_}" status_IFACE="$(ifconfig ${1} 2>${devnull} | gawk '$1 == "UP" {print "up"}')" eval vlans_IFACE=\"\$\{iface_${iface}_vlans\}\" eval ifconfig_IFACE=( \"\$\{ifconfig_$iface\[@\]\}\" ) eval dhcpcd_IFACE=\"\$\{dhcpcd_$iface\}\" eval routes_IFACE=( \"\$\{routes_$iface\[@\]\}\" ) eval inet6_IFACE=( \"\$\{inet6_$iface\[@\]\}\" ) eval ifconfig_fallback_IFACE=( \"\$\{ifconfig_fallback_$iface\[@\]\}\" ) eval bonding_IFACE=( \"\$\{bonding_$iface\[@\]\}\" ) # BACKWARD COMPATIBILITY: populate the ifconfig_IFACE array # if iface_IFACE is set (fex. iface_eth0 instead of ifconfig_eth0) eval local iface_IFACE=\"\$\{iface_$iface\}\" if [[ -n ${iface_IFACE} && -z ${ifconfig_IFACE} ]]; then # Start with the primary interface ifconfig_IFACE=( "${iface_IFACE}" ) fi if [[ -n ${ifconfig_IFACE} ]]; then # Make sure these get evaluated as arrays local -a aliases broadcasts netmasks # ..then add aliases eval aliases=( \$\{alias_$iface\} ) eval broadcasts=( \$\{broadcast_$iface\} ) eval netmasks=( \$\{netmask_$iface\} ) for ((i = 0; i < ${#aliases[@]}; i = i + 1)); do ifconfig_IFACE[i+1]="${aliases[i]} ${broadcasts[i]: +broadcast ${broadcasts[i]}} ${netmasks[i]:+netmask ${netmasks[i]}}" done fi # BACKWARD COMPATIBILITY: check for space-separated inet6 addresses if [[ ${#inet6_IFACE[@]} == 1 && ${inet6_IFACE} == *' '* ]]; then inet6_IFACE=( ${inet6_IFACE} ) fi } iface_start() { local IFACE=${1} i x retval checkconfig || return 1 if [[ ${ifconfig_IFACE} != dhcp ]]; then # Show the address, but catch if this interface will be inet6 only i=${ifconfig_IFACE%% *} if [[ ${i} == *.*.*.* ]]; then ebegin "Bringing ${IFACE} up (${i})" else ebegin "Bringing ${IFACE} up" fi # ifconfig does not always return failure .. ifconfig ${IFACE} ${ifconfig_IFACE} >${devnull} && \ ifconfig ${IFACE} up &>${devnull} eend $? || return $? if [[ -n "${bonding_IFACE}" ]]; then ifenslave ${IFACE} ${bonding_IFACE} &>${devnull} eend $? || return $? fi else # Check that eth0 was not brought up by the kernel ... if [[ ${status_IFACE} == up ]]; then einfo "Keeping kernel configuration for ${IFACE}" else ebegin "Bringing ${IFACE} up via DHCP" /sbin/dhcpcd ${dhcpcd_IFACE} ${IFACE} retval=$? eend $retval if [[ $retval == 0 ]]; then # DHCP succeeded, show address retrieved i=$(ifconfig ${IFACE} | grep -m1 -o 'inet addr: [^ ]*' | cut -d: -f2) [[ -n ${i} ]] && einfo " ${IFACE} received address ${i}" elif [[ -n "${ifconfig_fallback_IFACE}" ]]; then # DHCP failed, try fallback. # Show the address, but catch if this interface will be inet6 only i=${ifconfig_fallback_IFACE%% *} if [[ ${i} == *.*.*.* ]]; then ebegin "Using fallback configuration (${i}) for ${IFACE}" else ebegin "Using fallback configuration for ${IFACE}" fi ifconfig ${IFACE} ${ifconfig_fallback_IFACE} >${devnull} && \ ifconfig ${IFACE} up &>${devnull} eend $? || return $? else return $retval fi fi fi if [[ ${#ifconfig_IFACE[@]} -gt 1 ]]; then einfo " Adding aliases" for ((i = 1; i < ${#ifconfig_IFACE[@]}; i = i + 1)); do ebegin " ${IFACE}:${i} (${ifconfig_IFACE[i]%% *})" ifconfig ${IFACE}:${i} ${ifconfig_IFACE[i]} eend $? done fi if [[ -n ${inet6_IFACE} ]]; then einfo " Adding inet6 addresses" for ((i = 0; i < ${#inet6_IFACE[@]}; i = i + 1)); do ebegin " ${IFACE} inet6 add ${inet6_IFACE[i]}" ifconfig ${IFACE} inet6 add ${inet6_IFACE[i]} >${devnull} eend $? done fi # Set static routes if [[ -n ${routes_IFACE} ]]; then einfo " Adding routes" for ((i = 0; i < ${#routes_IFACE[@]}; i = i + 1)); do ebegin " ${routes_IFACE[i]}" /sbin/route add ${routes_IFACE[i]} eend $? done fi # Set default route if applicable to this interface if [[ ${gateway} == ${IFACE}/* ]]; then local ogw=$(/bin/netstat -rn | awk '$1 == "0.0.0.0" {print $2}') local gw=${gateway#*/} if [[ ${ogw} != ${gw} ]]; then ebegin " Setting default gateway ($gw)" # First delete any existing route if it was setup by kernel... /sbin/route del default dev ${IFACE} &>${devnull} # Second delete old gateway if it was set... /sbin/route del default gw ${ogw} &>${devnull} # Third add our new default gateway /sbin/route add default gw ${gw} >${devnull} eend $? || { true # need to have some command in here # Note: This originally called stop, which is obviously # wrong since it's calling with a local version of IFACE. # The below code works correctly to abort configuration of # the interface, but is commented because we're assuming # that default route failure should not cause the interface # to be unconfigured. #local error=$? #ewarn "Aborting configuration of ${IFACE}" #iface_stop ${IFACE} #return ${error} } fi fi # Enabling rp_filter causes wacky packets to be auto-dropped by # the kernel. Note that we only do this if it is not set via # /etc/sysctl.conf ... if [[ -e /proc/sys/net/ipv4/conf/${IFACE}/rp_filter && \ -z "$(grep -s '^[^#]*rp_filter' /etc/sysctl.conf)" ]]; then echo -n 1 > /proc/sys/net/ipv4/conf/${IFACE}/rp_filter fi } # iface_stop: bring down an interface. Don't trust information in # /etc/conf.d/net since the configuration might have changed since # iface_start ran. Instead query for current configuration and bring # down the interface. iface_stop() { local IFACE=${1} i x aliases inet6 count # Try to do a simple down (no aliases, no inet6, no dhcp) aliases="$(ifconfig | grep -o "^$IFACE:[0-9]*" | tac)" inet6="$(ifconfig ${IFACE} | awk '$1 == "inet6" {print $2}')" if [[ -z ${aliases} && -z ${inet6} && ! -e /var/run/dhcpcd-${IFACE}.pid ]]; then ebegin "Bringing ${IFACE} down" ifconfig ${IFACE} down &>/dev/null eend 0 return 0 fi einfo "Bringing ${IFACE} down" # Stop aliases before primary interface. # Note this must be done in reverse order, since ifconfig eth0:1 # will remove eth0:2, etc. It might be sufficient to simply remove # the base interface but we're being safe here. for i in ${aliases} ${IFACE}; do # Delete all the inet6 addresses for this interface inet6="$(ifconfig ${i} | awk '$1 == "inet6" {print $3}')" if [[ -n ${inet6} ]]; then einfo " Removing inet6 addresses" for x in ${inet6}; do ebegin " ${IFACE} inet6 del ${x}" ifconfig ${i} inet6 del ${x} eend $? done fi # Stop DHCP (should be N/A for aliases) # Don't trust current configuration... investigate ourselves if /sbin/dhcpcd -z ${i} &>${devnull}; then ebegin " Releasing DHCP lease for ${IFACE}" for ((count = 0; count < 9; count = count + 1)); do /sbin/dhcpcd -z ${i} &>${devnull} || break sleep 1 done [[ ${count} -lt 9 ]] eend $? "Timed out" fi ebegin " Stopping ${i}" ifconfig ${i} down &>${devnull} eend 0 done return 0 } start() { # These variables are set by setup_vars local status_IFACE vlans_IFACE dhcpcd_IFACE local -a ifconfig_IFACE routes_IFACE inet6_IFACE # Call user-defined preup function if it exists if [[ $(type -t preup) == function ]]; then einfo "Running preup function" preup ${IFACE} || { eerror "preup ${IFACE} failed" return 1 } fi # Start the primary interface and aliases setup_vars ${IFACE} iface_start ${IFACE} || return 1 # Start vlans local vlan for vlan in ${vlans_IFACE}; do /sbin/vconfig add ${IFACE} ${vlan} >${devnull} setup_vars ${IFACE}.${vlan} iface_start ${IFACE}.${vlan} done # Call user-defined postup function if it exists if [[ $(type -t postup) == function ]]; then einfo "Running postup function" postup ${IFACE} fi } stop() { # Call user-defined predown function if it exists if [[ $(type -t predown) == function ]]; then einfo "Running predown function" predown ${IFACE} fi # Don't depend on setup_vars since configuration might have changed. # Investigate current configuration instead. local vlan for vlan in $(ifconfig | grep -o "^${IFACE}\.[^ ]*"); do iface_stop ${vlan} /sbin/vconfig rem ${vlan} >${devnull} done iface_stop ${IFACE} || return 1 # always succeeds, btw # Call user-defined postdown function if it exists if [[ $(type -t postdown) == function ]]; then einfo "Running postdown function" postdown ${IFACE} fi } # vim:ts=4 emerge info Portage 2.0.51.19 (default-linux/x86/2005.0, gcc-3.3.5-20050130, glibc-2.3.4.20041102-r1, 2.6.11-gentoo-r4 i686) ================================================================= System uname: 2.6.11-gentoo-r4 i686 Intel(R) Pentium(R) 4 CPU 2.40GHz Gentoo Base System version 1.4.16 Python: dev-lang/python-2.3.4-r1 [2.3.4 (#1, Feb 28 2005, 11:57:04)] distcc 2.16 i686-pc-linux-gnu (protocols 1 and 2) (default port 3632) [disabled] ccache version 2.3 [enabled] dev-lang/python: 2.3.4-r1 sys-devel/autoconf: 2.13, 2.59-r6 sys-devel/automake: 1.8.5-r3, 1.5, 1.7.9-r1, 1.6.3, 1.4_p6, 1.9.4 sys-devel/binutils: 2.15.92.0.2-r7 sys-devel/libtool: 1.5.14 virtual/os-headers: 2.6.8.1-r2 ACCEPT_KEYWORDS="x86" AUTOCLEAN="yes" CFLAGS="-march=pentium4 -O2 -pipe" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3/share/config /usr/lib/fax /usr/share/config /usr/share/texmf/dvipdfm/config/ /usr/share/texmf/dvips/config/ /usr/share/texmf/tex/generic/config/ /usr/share/texmf/tex/platex/config/ /usr/share/texmf/xdvi/ /var/qmail/control /var/spool/fax/etc" CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d" CXXFLAGS="-march=pentium4 -O2 -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="autoaddcvs autoconfig ccache distlocks sandbox sfperms" GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/Linux/distributions/gentoo" LANG="fr_FR@euro" LC_ALL="fr_FR@euro" LINGUAS="fr" MAKEOPTS="-j2" PKGDIR="/usr/portage/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage" USE="x86 aalib acl apache2 audiofile avi berkdb bitmap-fonts bzlib caps cpdflib crypt cscope cups curl dba dbase dbx doc emboss encode ethereal exif fam fastcgi fftw flac flash foomaticdb fortran freetds ftp gcj gd gif gignac gpm gstreamer guile ifc imagemagick imap imlib innodb ipv6 jabber java jikes jpeg junit kerberos krb4 ladcca lcms ldap libg++ libwww mad maildir mailwrapper mbox mcal mcve memlimit mhash mikmod milter mime ming mmap mmx mng motif mp3 mpeg mpi msession mssql mysql mysqli ncurses netcdf nhc98 nls nocardbus nptl odbc offensive oggvorbis openal opengl oscar oss pam pcntl pcre pdflib perl pfpro php plotutils png postgres prelude python quicktime readline recode samba sasl scanner session shared simplexml slp snmp soap sockets socks5 speex spell spl sqlite sse ssl svg svga sysvpic szip tcpd tetex theora tidy tiff tokenizer truetype truetype-fonts type1-fonts unicode usb userlocales vhosts videos wmf xface xml xml2 xmlrpc xmms xpm xsl xv yaz zlib linguas_fr" Unset: ASFLAGS, CBUILD, CTARGET, LDFLAGS, PORTDIR_OVERLAY
Created attachment 56816 [details] Patch with bonding support Correct bug alias ip and add bonding support
I try to help you, sory if i'm make mistake :(
baselayout-1.11.11 (currently ~ARCH) has bonding support.
