Thanks
please do a runtime check (at least running inxi --full). That should not take long and ensures that the tool does something useful with ia64.
(In reply to Jonas Stein from comment #1) > please do a runtime check (at least running inxi --full). That should not > take long and ensures that the tool does something useful with ia64. Oh sorry, should have included that! Yes, it works perfectly, including dmidecode since ia64 uses EFI. Sample output for my box: $ sudo inxi -FfmNnxxxz System: Kernel: 5.19.12-gentoo-ia64 arch: ia64 bits: 64 compiler: N/A Console: pty pts/0 Distro: Gentoo Base System release 2.9 Machine: Type: Server System: hp product: Integrity rx2800 i2 v: AH395A serial: <filter> Chassis: type: 17 serial: <filter> Mobo: N/A model: N/A serial: N/A UEFI: hp v: 01.80 date: 05/29/2011 Memory: RAM: total: 15.77 GiB used: 484.1 MiB (3.0%) Array-1: capacity: 96 GiB slots: 6 EC: Multi-bit ECC max-module-size: 16 GiB note: est. Device-1: CPU 0, Riser 1, Slot 04A type: N/A size: 4 GiB speed: 1066 MT/s volts: N/A width (bits): data: 64 total: 72 manufacturer: Samsung part-no: M393B5273CH0-YH9 serial: <filter> Device-2: CPU 0, Riser 1, Slot 03A type: N/A size: 4 GiB speed: 1066 MT/s volts: N/A width (bits): data: 64 total: 72 manufacturer: Samsung part-no: M393B5273CH0-YH9 serial: <filter> Device-3: Riser 1, CPU 0,Slot 06B type: no module installed Device-4: Riser 1, CPU 0,Slot 01B type: no module installed Device-5: Riser 1, CPU 0,Slot 05C type: no module installed Device-6: Riser 1, CPU 0,Slot 02C type: no module installed Array-2: capacity: 96 GiB slots: 6 EC: Multi-bit ECC max-module-size: 16 GiB note: est. Device-1: CPU 1, Riser 3, Slot 04A type: N/A size: 4 GiB speed: 1066 MT/s volts: N/A width (bits): data: 64 total: 72 manufacturer: Samsung part-no: M393B5273CH0-YH9 serial: <filter> Device-2: CPU 1, Riser 3, Slot 03A type: N/A size: 4 GiB speed: 1066 MT/s volts: N/A width (bits): data: 64 total: 72 manufacturer: Samsung part-no: M393B5273CH0-YH9 serial: <filter> Device-3: Riser 3, CPU 1,Slot 06B type: no module installed Device-4: Riser 3, CPU 1,Slot 01B type: no module installed Device-5: Riser 3, CPU 1,Slot 05C type: no module installed Device-6: Riser 3, CPU 1,Slot 02C type: no module installed CPU: Info: 2x 4-core model: Intel Itanium 9340 bits: 64 type: MT MCP SMP smt: enabled arch: N/A rev: 4 cache: L1: 2x 128 KiB (256 KiB) L2: N/A L3: 2x 5 MiB (10 MiB) Speed (MHz): avg: 799 min/max: 799/1599 volts: 0.0 V ext-clock: 133 MHz cores: 1: 799 2: 799 3: 799 4: 799 5: 799 6: 799 7: 799 8: 799 9: 799 10: 799 11: 799 12: 799 13: 799 14: 799 15: 799 16: 799 bogomips: 55115 Flags: 0x8 16-byte atomic branchlong, ops, Graphics: Device-1: AMD ES1000 vendor: Hewlett-Packard Integrity iLO2 driver: radeon v: kernel arch: Rage-6 ports: active: none empty: VGA-1,VGA-2 bus-ID: 08:03.0 chip-ID: 1002:515e class-ID: 0300 Display: server: No display server data found. Headless machine? tty: 120x85 Message: Unable to show GL data. Required tool glxinfo missing. Audio: Message: No device data found. Network: Device-1: Intel Ethernet 10G 2P X520 Adapter driver: ixgbe v: kernel pcie: speed: 5 GT/s lanes: 4 port: 5020 bus-ID: 03:00.0 chip-ID: 8086:154d class-ID: 0200 IF: enp3s0f0 state: up speed: 10000 Mbps duplex: full mac: <filter> Device-2: Intel Ethernet 10G 2P X520 Adapter driver: ixgbe v: kernel pcie: speed: 5 GT/s lanes: 4 port: 5000 bus-ID: 03:00.1 chip-ID: 8086:154d class-ID: 0200 IF: enp3s0f1 state: down mac: <filter> Device-3: Intel 82575EB Gigabit Network vendor: Hewlett-Packard driver: igb v: kernel pcie: speed: 2.5 GT/s lanes: 2 port: 4020 bus-ID: 05:00.0 chip-ID: 8086:10a7 class-ID: 0200 IF: enp5s0f0 state: down mac: <filter> Device-4: Intel 82575EB Gigabit Network vendor: Hewlett-Packard driver: igb v: kernel pcie: speed: 2.5 GT/s lanes: 2 port: 4000 bus-ID: 05:00.1 chip-ID: 8086:10a7 class-ID: 0200 IF: enp5s0f1 state: down mac: <filter> Device-5: Intel 82575EB Gigabit Network vendor: Hewlett-Packard driver: igb v: kernel pcie: speed: 2.5 GT/s lanes: 2 port: 3020 bus-ID: 06:00.0 chip-ID: 8086:10a7 class-ID: 0200 IF: enp6s0f0 state: down mac: <filter> Device-6: Intel 82575EB Gigabit Network vendor: Hewlett-Packard driver: igb v: kernel pcie: speed: 2.5 GT/s lanes: 2 port: 3000 bus-ID: 06:00.1 chip-ID: 8086:10a7 class-ID: 0200 IF: enp6s0f1 state: down mac: <filter> RAID: Hardware-1: Hewlett-Packard Smart Array G6 controllers driver: hpsa v: 3.4.20-200 port: 6000 bus-ID: 01:00.0 chip-ID: 103c:323a rev: N/A class-ID: 0104 Drives: Local Storage: total: 136.7 GiB used: 43.14 GiB (31.6%) ID-1: /dev/sda model: LOGICAL VOLUME size: 136.7 GiB type: N/A serial: N/A rev: 5.78 scheme: GPT Partition: ID-1: / size: 129.56 GiB used: 43.06 GiB (33.2%) fs: ext4 dev: /dev/sda2 ID-2: /boot size: 3.99 GiB used: 74.6 MiB (1.8%) fs: vfat dev: /dev/sda1 Swap: Alert: No swap data was found. Sensors: Missing: Required tool sensors not installed. Check --recommends Info: Processes: 176 Uptime: 1h 8m Init: SysVinit v: 3.05 rc: OpenRC v: 0.45.2 runlevel: default default: 3 Compilers: gcc: 12.2.0 alt: 12.2.0 Packages: emerge: 613 Shell: Bash (sudo) v: 5.1.16 running-in: pty pts/0 inxi: 3.3.20
ia64 done all arches done
