when I try to run any application that plays dvd's I get this error libdvdread: Using libdvdcss version 1.2.8 for DVD access libdvdread: Can't open file VIDEO_TS.IFO. Can't open VMG info. I was using 2.6.10r7, tried upgrading to 2.6.11r2 recompiled mplayer, libdvdread, libdvdcss, ogle with dvdread and dvd support tried switching to udev, same error lrwxrwxrwx 1 root root 3 Mar 8 07:52 /dev/dvd -> hda when I try to read a dvd I get this in messages Mar 8 16:28:39 static ATAPI device hda: Mar 8 16:28:39 static Error: Not ready -- (Sense key=0x02) Mar 8 16:28:39 static No reference position found (media may be upside down) -- (asc=0x06, ascq=0x00) Mar 8 16:28:39 static The failed "Read Cd/Dvd Capacity" packet command was: Mar 8 16:28:39 static "25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 " I have tried multiple dvd's, and no go... maybe I am doing something wrong.. _ALL_ of the dvd's im trying to play, play fine in windows my cdrom is at /dev/hda, this is a laptop, here is an hdparm static static # hdparm -iI /dev/hda /dev/hda: Model=HL-DT-STCD-RW/DVD-ROM GCC-4243N, FwRev=A103, SerialNo= Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=0kB, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 AdvancedPM=no Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3: * signifies the current active mode ATAPI CD-ROM, with removable media Model Number: HL-DT-STCD-RW/DVD-ROM GCC-4243N Serial Number: Firmware Revision: A103 Standards: Likely used CD-ROM ATAPI-1 Configuration: DRQ response: 50us. Packet size: 12 bytes Capabilities: LBA, IORDY(can be disabled) DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 *udma2 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns HW reset results: CBLID- below Vih Device num = 0 determined by CSEL Reproducible: Always Steps to Reproduce: 1.put dvd in drive 2.ogle /dev/dvd 3.or any of the libdvdread tools /dev/dvd Actual Results: libdvdread: Using libdvdcss version 1.2.8 for DVD access libdvdread: Can't open file VIDEO_TS.IFO. Can't open VMG info. Expected Results: it should have played the dvd
please provide the outout of 'emerge info'
you failed to provide the output of emerge info, reopen if you want to do that. :)
