I've recently updated KDE to 3.4.0_rc1. After that automake-1.9.5 came out so I emerged that, too (I previously had automake-1.9.4). When I wanted to reemerge arts, I got the following output: >>> emerge (1 of 1) kde-base/arts-3.4.0_rc1 to / >>> md5 src_uri ;-) arts-1.4.0-rc1.tar.bz2 >>> Unpacking source... >>> Unpacking arts-1.4.0-rc1.tar.bz2 to /var/tmp/portage/arts-3.4.0_rc1/work * Applying 1.3.0-jack-configure.in.in.patch ... [ ok ] * Applying arts-1.3.2-alsa-bigendian.patch ... [ ok ] *** Creating acinclude.m4 make[1]: Entering directory `/var/tmp/portage/arts-3.4.0_rc1/work/arts-1.4.0' make[1]: Nothing to be done for `acinclude.m4'. make[1]: Leaving directory `/var/tmp/portage/arts-3.4.0_rc1/work/arts-1.4.0' *** Creating list of subdirectories *** Creating Makefile.am *** Creating configure.files *** Creating configure.in *** Creating aclocal.m4 *** Creating configure *** Creating config.h template *** Creating Makefile templates configure.in:28: version mismatch. This is Automake 1.9.5, configure.in:28: but the definition used by this AM_INIT_AUTOMAKE configure.in:28: comes from Automake 1.7.9. You should recreate configure.in:28: aclocal.m4 with aclocal and run automake again. flow/gsl/gslmakefile.inc:43: variable `gslffttest_LDFLAGS' is defined but no program or flow/gsl/gslmakefile.inc:43: library has `gslffttest' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:39: variable `gsltests_LDADD' is defined but no program or flow/gsl/gslmakefile.inc:39: library has `gsltests' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:36: variable `gslwchunk_LDADD' is defined but no program or flow/gsl/gslmakefile.inc:36: library has `gslwchunk' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:38: variable `gsltests_SOURCES' is defined but no program or flow/gsl/gslmakefile.inc:38: library has `gsltests' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:42: variable `gslffttest_LDADD' is defined but no program or flow/gsl/gslmakefile.inc:42: library has `gslffttest' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:40: variable `gsltests_LDFLAGS' is defined but no program or flow/gsl/gslmakefile.inc:40: library has `gsltests' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:35: variable `gslwchunk_SOURCES' is defined but no program or flow/gsl/gslmakefile.inc:35: library has `gslwchunk' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:41: variable `gslffttest_SOURCES' is defined but no program or flow/gsl/gslmakefile.inc:41: library has `gslffttest' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:37: variable `gslwchunk_LDFLAGS' is defined but no program or flow/gsl/gslmakefile.inc:37: library has `gslwchunk' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here make: *** [cvs] Error 1 !!! ERROR: kde-base/arts-3.4.0_rc1 failed. !!! Function src_unpack, Line 39, Exitcode 2 !!! (no error message) !!! If you need support, post the topmost build error, NOT this status message. I was able to reemerge arts with the following command: WANT_AUTOMAKE=1.7 emerge arts Reproducible: Always Steps to Reproduce: emerge automake 1.9.5 emerge arts 3.4.0_rc1 Actual Results: See error in detailed description. Expected Results: arts should have been emerged.
I'm not at a place where I can fix this at the moment, but it looks like the ebuild needs to run aclocal after performing the epatches. This looks like a regression, as previous kde releases were built with automake 1.9.2, and this looks like it was build with 1.7.
That's strange, the ebuild already runs 'make -f Makefile.common'. Here the admin/detect-autoconf.sh script detects that it should run automake-1.7 and everything works fine, with both automake-1.9.4 or 1.9.5
I've tried the following now: cd /var/tmp/portage/arts-3.4.0_rc1/work/arts-1.4.0/ aclocal /usr/share/aclocal/wxwin.m4:36: warning: underquoted definition of AM_OPTIONS_WXCONFIG run info '(automake)Extending aclocal' or see http://sources.redhat.com/automake/automake.html#Extending-aclocal /usr/share/aclocal/wxwin.m4:59: warning: underquoted definition of AM_PATH_WXCONFIG /usr/share/aclocal/speex.m4:10: warning: underquoted definition of XIPH_PATH_SPEEX /usr/share/aclocal/smpeg.m4:13: warning: underquoted definition of AM_PATH_SMPEG /usr/share/aclocal/pth.m4:43: warning: underquoted definition of _AC_PTH_ERROR /usr/share/aclocal/pth.m4:54: warning: underquoted definition of _AC_PTH_VERBOSE /usr/share/aclocal/pth.m4:60: warning: underquoted definition of AC_CHECK_PTH /usr/share/aclocal/pkg.m4:5: warning: underquoted definition of PKG_CHECK_MODULES /usr/share/aclocal/movtar.m4:14: warning: underquoted definition of MOVTAR_TEST_VERSION /usr/share/aclocal/movtar.m4:59: warning: underquoted definition of AM_PATH_MOVTAR /usr/share/aclocal/lqt.m4:14: warning: underquoted definition of AC_PATH_LQT /usr/share/aclocal/libmikmod.m4:11: warning: underquoted definition of AM_PATH_LIBMIKMOD /usr/share/aclocal/libfame.m4:6: warning: underquoted definition of AM_PATH_LIBFAME /usr/share/aclocal/imlib.m4:9: warning: underquoted definition of AM_PATH_IMLIB /usr/share/aclocal/imlib.m4:167: warning: underquoted definition of AM_PATH_GDK_IMLIB /usr/share/aclocal/gtk.m4:7: warning: underquoted definition of AM_PATH_GTK /usr/share/aclocal/glib.m4:8: warning: underquoted definition of AM_PATH_GLIB /usr/share/aclocal/audiofile.m4:12: warning: underquoted definition of AM_PATH_AUDIOFILE /usr/share/aclocal/aalib.m4:12: warning: underquoted definition of AM_PATH_AALIB automake flow/gsl/gslmakefile.inc:43: variable `gslffttest_LDFLAGS' is defined but no program or flow/gsl/gslmakefile.inc:43: library has `gslffttest' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:39: variable `gsltests_LDADD' is defined but no program or flow/gsl/gslmakefile.inc:39: library has `gsltests' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:36: variable `gslwchunk_LDADD' is defined but no program or flow/gsl/gslmakefile.inc:36: library has `gslwchunk' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:38: variable `gsltests_SOURCES' is defined but no program or flow/gsl/gslmakefile.inc:38: library has `gsltests' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:42: variable `gslffttest_LDADD' is defined but no program or flow/gsl/gslmakefile.inc:42: library has `gslffttest' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:40: variable `gsltests_LDFLAGS' is defined but no program or flow/gsl/gslmakefile.inc:40: library has `gsltests' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:35: variable `gslwchunk_SOURCES' is defined but no program or flow/gsl/gslmakefile.inc:35: library has `gslwchunk' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:41: variable `gslffttest_SOURCES' is defined but no program or flow/gsl/gslmakefile.inc:41: library has `gslffttest' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:37: variable `gslwchunk_LDFLAGS' is defined but no program or flow/gsl/gslmakefile.inc:37: library has `gslwchunk' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here
Rene, you do have automake 1.7 installed too, right?
Yes, I've got automake-1.7.9-r1, installed on Jan 29th.
You can do: # export WANT_ACWRAPPER_DEBUG=1 # export WANT_AMWRAPPER_DEBUG=1 and try to reproduce the error. They will produce output whenever /usr/bin/autoconf or /usr/bin/automake is run (which is a bad thing with respect to automake, because the kde build process should call /usr/bin/automake-1.7 directly).
emerge arts now gives this: Calculating dependencies ...done! >>> emerge (1 of 1) kde-base/arts-3.4.0_rc1 to / >>> md5 src_uri ;-) arts-1.4.0-rc1.tar.bz2 >>> Unpacking source... >>> Unpacking arts-1.4.0-rc1.tar.bz2 to /var/tmp/portage/arts-3.4.0_rc1/work * Applying 1.3.0-jack-configure.in.in.patch ... [ ok ] * Applying arts-1.3.2-alsa-bigendian.patch ... [ ok ] ac-wrapper: DEBUG: will execute </usr/bin/autoconf-2.59> ac-wrapper: DEBUG: will execute </usr/bin/autoheader-2.59> am-wrapper: DEBUG: will execute </usr/bin/automake-1.9> *** Creating acinclude.m4 make[1]: Entering directory `/var/tmp/portage/arts-3.4.0_rc1/work/arts-1.4.0' make[1]: Nothing to be done for `acinclude.m4'. make[1]: Leaving directory `/var/tmp/portage/arts-3.4.0_rc1/work/arts-1.4.0' *** Creating list of subdirectories *** Creating Makefile.am *** Creating configure.files *** Creating configure.in *** Creating aclocal.m4 *** Creating configure ac-wrapper: DEBUG: will execute </usr/bin/autoconf-2.59> ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autom4te-2.59> *** Creating config.h template ac-wrapper: DEBUG: will execute </usr/bin/autoheader-2.59> ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autom4te-2.59> *** Creating Makefile templates am-wrapper: DEBUG: will execute </usr/bin/automake-1.9> ac-wrapper: DEBUG: will execute </usr/bin/autoconf-2.59> ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autom4te-2.59> configure.in:28: version mismatch. This is Automake 1.9.5, configure.in:28: but the definition used by this AM_INIT_AUTOMAKE configure.in:28: comes from Automake 1.7.9. You should recreate configure.in:28: aclocal.m4 with aclocal and run automake again. flow/gsl/gslmakefile.inc:43: variable `gslffttest_LDFLAGS' is defined but no program or flow/gsl/gslmakefile.inc:43: library has `gslffttest' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:39: variable `gsltests_LDADD' is defined but no program or flow/gsl/gslmakefile.inc:39: library has `gsltests' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:36: variable `gslwchunk_LDADD' is defined but no program or flow/gsl/gslmakefile.inc:36: library has `gslwchunk' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:38: variable `gsltests_SOURCES' is defined but no program or flow/gsl/gslmakefile.inc:38: library has `gsltests' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:42: variable `gslffttest_LDADD' is defined but no program or flow/gsl/gslmakefile.inc:42: library has `gslffttest' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:40: variable `gsltests_LDFLAGS' is defined but no program or flow/gsl/gslmakefile.inc:40: library has `gsltests' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:35: variable `gslwchunk_SOURCES' is defined but no program or flow/gsl/gslmakefile.inc:35: library has `gslwchunk' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:41: variable `gslffttest_SOURCES' is defined but no program or flow/gsl/gslmakefile.inc:41: library has `gslffttest' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:37: variable `gslwchunk_LDFLAGS' is defined but no program or flow/gsl/gslmakefile.inc:37: library has `gslwchunk' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here make: *** [cvs] Error 1 !!! ERROR: kde-base/arts-3.4.0_rc1 failed. !!! Function src_unpack, Line 39, Exitcode 2 !!! (no error message) !!! If you need support, post the topmost build error, NOT this status message.
I have downgraded automake to 1.9.4 and portage to 2.0.51-r15 now and tried to reemerge k3b and arts. This is what I get for k3b (arts doesn't work either): emerge k3b Calculating dependencies ...done! >>> emerge (1 of 1) app-cdr/k3b-0.11.20 to / >>> md5 src_uri ;-) k3b-0.11.20.tar.bz2 >>> Unpacking source... >>> Unpacking k3b-0.11.20.tar.bz2 to /var/tmp/portage/k3b-0.11.20/work * Applying k3b-0.11.17-noarts.patch ... [ ok ] ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autoconf-2.59> ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autoheader-2.59> am-wrapper: DEBUG: WANT_AUTOMAKE is set to 1.6 am-wrapper: DEBUG: will execute </usr/bin/automake-1.6> *** Creating acinclude.m4 *** Creating list of subdirectories *** Creating Makefile.am *** Creating configure.files *** Creating configure.in *** Creating aclocal.m4 *** Creating configure ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autoconf-2.59> ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autom4te-2.59> *** Creating config.h template ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autoheader-2.59> ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autom4te-2.59> *** Creating Makefile templates am-wrapper: DEBUG: WANT_AUTOMAKE is set to 1.6 am-wrapper: DEBUG: will execute </usr/bin/automake-1.6> aclocal.m4:11804: version mismatch. This is Automake 1.6.3, but aclocal.m4 aclocal.m4:11804: was generated for Automake 1.7.9. You should recreate aclocal.m4:11804: aclocal.m4 with aclocal and run automake again. aclocal.m4:12487: `automake requires `AM_CONFIG_HEADER', not `AC_CONFIG_HEADER' aclocal.m4:12487: required file `./$@)].in' not found make: *** [cvs] Error 1 !!! ERROR: app-cdr/k3b-0.11.20 failed. !!! Function src_unpack, Line 55, Exitcode 2 !!! (no error message) !!! If you need support, post the topmost build error, NOT this status message. It looks like aclocal.m4 is built with WANT_AUTOMAKE set to 1.6, yet it's said that "aclocal.m4 was generated for Automake 1.7.9." Something is severly broken here, but what?
I've uninstalled and then reinstalled automake/autoconf completely (see http://forums.gentoo.org/viewtopic-p-2156097.html#2156097). automake is still version 1.9.4. This didn't help either.
You do have automake-wrapepr and autoconf-wrapper installed too, right?
err automake-wrapper
automake-wrapper yes, autoconf-wrapper no. Actually I did an # emerge -C automake automake-wrapper autoconf # emerge -C gnuconf # remove all links to config.sub and config.guess followed by # emerge gnuconf # emerge automake-wrapper BTW: Have you seen the private mail I sent to you wrt compiling KDE with debug information?
I had autoconf-wrapper-2-r1 installed which I now have reemerged as well. But the result is the same as before.
Is this the reason? Makefile.in: # Makefile.in generated by automake 1.6.3 from Makefile.am. aclocal.m4: # generated automatically by aclocal 1.7.9 -*- Autoconf -*- Error message: ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autoconf-2.59> ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autoheader-2.59> am-wrapper: DEBUG: WANT_AUTOMAKE is set to 1.6 am-wrapper: DEBUG: will execute </usr/bin/automake-1.6> *** Creating acinclude.m4 *** Creating list of subdirectories *** Creating Makefile.am *** Creating configure.files *** Creating configure.in *** Creating aclocal.m4 *** Creating configure ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autoconf-2.59> ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autom4te-2.59> *** Creating config.h template ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autoheader-2.59> ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autom4te-2.59> *** Creating Makefile templates am-wrapper: DEBUG: WANT_AUTOMAKE is set to 1.6 am-wrapper: DEBUG: will execute </usr/bin/automake-1.6> aclocal.m4:11832: version mismatch. This is Automake 1.6.3, but aclocal.m4 aclocal.m4:11832: was generated for Automake 1.7.9. You should recreate aclocal.m4:11832: aclocal.m4 with aclocal and run automake again. aclocal.m4:12515: `automake requires `AM_CONFIG_HEADER', not `AC_CONFIG_HEADER' aclocal.m4:12515: required file `./$@)].in' not found make: *** [cvs] Error 1 !!! ERROR: app-cdr/k3b-0.11.22 failed. !!! Function src_unpack, Line 56, Exitcode 2 !!! (no error message) !!! If you need support, post the topmost build error, NOT this status message. It looks like automake-1.6.3 is chosen due to Makefile.in, and it chokes on aclocal.m4 afterwards. I was able to compile k3b by replacing automake-1.6 with a link to automake-1.7. I really wonder why this worked before.
Is this still happening? On a normal system am-wrapper should never be called during kde building, I cannot see why it's happening here.
Yes, it's still happening. K3b gives: >>> emerge (1 of 1) app-cdr/k3b-0.11.24 to / >>> md5 files ;-) k3b-0.12_beta1.ebuild >>> md5 files ;-) k3b-0.11.24.ebuild >>> md5 files ;-) k3b-0.11.23-r2.ebuild >>> md5 files ;-) files/digest-k3b-0.11.24 >>> md5 files ;-) files/k3b-0.11.17-noarts.patch >>> md5 files ;-) files/digest-k3b-0.12_beta1 >>> md5 files ;-) files/k3b-dvdrip-transcode.patch >>> md5 files ;-) files/digest-k3b-0.11.23-r2 >>> md5 src_uri ;-) k3b-0.11.24.tar.bz2 >>> Unpacking source... >>> Unpacking k3b-0.11.24.tar.bz2 to /var/tmp/portage/k3b-0.11.24/work * Applying k3b-0.11.17-noarts.patch ... [ ok ] ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autoconf-2.59> ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autoheader-2.59> am-wrapper: DEBUG: WANT_AUTOMAKE is set to 1.6 am-wrapper: DEBUG: will execute </usr/bin/automake-1.6> *** automake (GNU automake) 1.6.3 found. *** Creating acinclude.m4 *** Creating list of subdirectories *** Creating configure.files *** Creating configure.in *** Creating aclocal.m4 *** Creating configure ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autoconf-2.59> ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autom4te-2.59> *** Creating config.h template ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autoheader-2.59> ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autom4te-2.59> *** Creating Makefile templates am-wrapper: DEBUG: WANT_AUTOMAKE is set to 1.6 am-wrapper: DEBUG: will execute </usr/bin/automake-1.6> aclocal.m4:11880: version mismatch. This is Automake 1.6.3, but aclocal.m4 aclocal.m4:11880: was generated for Automake 1.7.9. You should recreate aclocal.m4:11880: aclocal.m4 with aclocal and run automake again. aclocal.m4:12563: `automake requires `AM_CONFIG_HEADER', not `AC_CONFIG_HEADER' aclocal.m4:12563: required file `./$@)].in' not found make: *** [cvs] Error 1 And arts gives: >>> emerge (1 of 1) kde-base/arts-3.4.0 to / >>> md5 files ;-) arts-1.2.3.ebuild >>> md5 files ;-) arts-1.3.2-r1.ebuild >>> md5 files ;-) arts-1.3.2.ebuild >>> md5 files ;-) arts-3.4.0.ebuild >>> md5 files ;-) files/arts-vorbis-fix.dif >>> md5 files ;-) files/arts-1.3.2-mcopidl.patch >>> md5 files ;-) files/digest-arts-1.2.3 >>> md5 files ;-) files/digest-arts-1.3.2 >>> md5 files ;-) files/arts-1.2.3-buffer.patch >>> md5 files ;-) files/1.3.0-jack-configure.in.in.patch >>> md5 files ;-) files/arts-1.3.2-alsa-bigendian.patch >>> md5 files ;-) files/arts-1.4-mcopidl.patch >>> md5 files ;-) files/digest-arts-1.3.2-r1 >>> md5 files ;-) files/digest-arts-3.4.0 >>> md5 src_uri ;-) arts-1.4.0.tar.bz2 >>> Unpacking source... >>> Unpacking arts-1.4.0.tar.bz2 to /var/tmp/portage/arts-3.4.0/work * Applying 1.3.0-jack-configure.in.in.patch ... [ ok ] * Applying arts-1.3.2-alsa-bigendian.patch ... [ ok ] ac-wrapper: DEBUG: will execute </usr/bin/autoconf-2.59> ac-wrapper: DEBUG: will execute </usr/bin/autoheader-2.59> am-wrapper: DEBUG: will execute </usr/bin/automake-1.9> *** Creating acinclude.m4 make[1]: Entering directory `/var/tmp/portage/arts-3.4.0/work/arts-1.4.0' make[1]: Nothing to be done for `acinclude.m4'. make[1]: Leaving directory `/var/tmp/portage/arts-3.4.0/work/arts-1.4.0' *** Creating list of subdirectories *** Creating Makefile.am *** Creating configure.files *** Creating configure.in *** Creating aclocal.m4 *** Creating configure ac-wrapper: DEBUG: will execute </usr/bin/autoconf-2.59> ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autom4te-2.59> *** Creating config.h template ac-wrapper: DEBUG: will execute </usr/bin/autoheader-2.59> ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autom4te-2.59> *** Creating Makefile templates am-wrapper: DEBUG: will execute </usr/bin/automake-1.9> ac-wrapper: DEBUG: will execute </usr/bin/autoconf-2.59> ac-wrapper: DEBUG: WANT_AUTOCONF is set to 2.5 ac-wrapper: DEBUG: will execute </usr/bin/autom4te-2.59> configure.in:28: version mismatch. This is Automake 1.9.5, configure.in:28: but the definition used by this AM_INIT_AUTOMAKE configure.in:28: comes from Automake 1.7.9. You should recreate configure.in:28: aclocal.m4 with aclocal and run automake again. flow/gsl/gslmakefile.inc:43: variable `gslffttest_LDFLAGS' is defined but no program or flow/gsl/gslmakefile.inc:43: library has `gslffttest' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:39: variable `gsltests_LDADD' is defined but no program or flow/gsl/gslmakefile.inc:39: library has `gsltests' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:36: variable `gslwchunk_LDADD' is defined but no program or flow/gsl/gslmakefile.inc:36: library has `gslwchunk' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:38: variable `gsltests_SOURCES' is defined but no program or flow/gsl/gslmakefile.inc:38: library has `gsltests' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:42: variable `gslffttest_LDADD' is defined but no program or flow/gsl/gslmakefile.inc:42: library has `gslffttest' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:40: variable `gsltests_LDFLAGS' is defined but no program or flow/gsl/gslmakefile.inc:40: library has `gsltests' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:35: variable `gslwchunk_SOURCES' is defined but no program or flow/gsl/gslmakefile.inc:35: library has `gslwchunk' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:41: variable `gslffttest_SOURCES' is defined but no program or flow/gsl/gslmakefile.inc:41: library has `gslffttest' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here flow/gsl/gslmakefile.inc:37: variable `gslwchunk_LDFLAGS' is defined but no program or flow/gsl/gslmakefile.inc:37: library has `gslwchunk' as canonic name (possible typo) flow/gsl/Makefile.am:7: `flow/gsl/gslmakefile.inc' included from here make: *** [cvs] Error 1
Update: The new k3b-0.12 emerged without a problem. arts-3.4.1 and now kdelibs-3.4.1 as well don't emerge.
Is this still a problem?
Yes, arts and kdelibs still fail. I have recently installed another system from scratch, where everything worked as it should, so this is probably a problem of my system. Only that I cannot think of any reason, why. I guess I will just have to live with it.
Oh well... I really don't think we can do much at this point...
FYI: arts-3.5.0 and kdelibs-3.5.0 didn't show this behavior, so compiled as expected.
