cat /var/tmp/portage/dev-perl/Error-0.170.250/temp/build.log * Package: dev-perl/Error-0.170.250 * Repository: gentoo * Maintainer: perl@gentoo.org * USE: abi_x86_32 elibc_glibc kernel_linux userland_GNU x86 * FEATURES: network-sandbox preserve-libs sandbox userpriv usersandbox Unable to unshare: EPERM Unable to unshare: EPERM >>> Unpacking source... >>> Unpacking Error-0.17025.tar.gz to /var/tmp/portage/dev-perl/Error-0.170.250/work >>> Source unpacked in /var/tmp/portage/dev-perl/Error-0.170.250/work Unable to unshare: EPERM >>> Preparing source in /var/tmp/portage/dev-perl/Error-0.170.250/work/Error-0.17025 ... >>> Source prepared. Unable to unshare: EPERM >>> Configuring source in /var/tmp/portage/dev-perl/Error-0.170.250/work/Error-0.17025 ... * Using Module::Build * perl Build.PL --installdirs=vendor --libdoc= --destdir=/var/tmp/portage/dev-perl/Error-0.170.250/image/ --create_packlist=1 Can't locate Module/Build.pm in @INC (you may need to install the Module::Build module) (@INC contains: inc /etc/perl /usr/local/lib/perl5/5.30.3/i686-linux /usr/local/lib/perl5/5.30.3 /usr/lib/perl5/vendor_perl/5.30.3/i686-linux /usr/lib/perl5/vendor_perl/5.30.3 /usr/local/lib/perl5 /usr/lib/perl5/vendor_perl/5.28.2 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.30.3/i686-linux /usr/lib/perl5/5.30.3) at inc/Test/Run/Builder.pm line 6. BEGIN failed--compilation aborted at inc/Test/Run/Builder.pm line 6. Compilation failed in require at Build.PL line 7. BEGIN failed--compilation aborted at Build.PL line 7. * ERROR: dev-perl/Error-0.170.250::gentoo failed (configure phase): * Unable to build! * * Call stack: * ebuild.sh, line 125: Called src_configure * environment, line 872: Called perl-module_src_configure * environment, line 442: Called die * The specific snippet of code: * perl Build.PL "$@" <<< "${pm_echovar}" || die "Unable to build!"; * * If you need support, post the output of `emerge --info '=dev-perl/Error-0.170.250::gentoo'`, * the complete build log and the output of `emerge -pqv '=dev-perl/Error-0.170.250::gentoo'`. * The complete build log is located at '/var/tmp/portage/dev-perl/Error-0.170.250/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-perl/Error-0.170.250/temp/environment'. * Working directory: '/var/tmp/portage/dev-perl/Error-0.170.250/work/Error-0.17025' * S: '/var/tmp/portage/dev-perl/Error-0.170.250/work/Error-0.17025' emerge --info Portage 2.3.79 (python 3.6.10-final-0, default/linux/x86/17.0, gcc-9.3.0, glibc-2.30-r8, 3.18.21-vs2.3.7.4 i686) ================================================================= System uname: Linux-3.18.21-vs2.3.7.4-i686-Intel-R-_Xeon-R-_CPU_E5450_@_3.00GHz-with-gentoo-2.6 KiB Mem: 2071208 total, 199492 free KiB Swap: 2000060 total, 1975596 free Timestamp of repository gentoo: Mon, 27 Jul 2020 19:45:01 +0000 Head commit of repository gentoo: b87d1ff1721dcbfe0ee44fb7c2624e173290d615 Head commit of repository pentoo: 4de45afeac89a6b6a6f5989bf7a34d582c682046 sh bash 5.0_p17 ld GNU ld (Gentoo 2.32 p2) 2.32.0 app-shells/bash: 5.0_p17::gentoo dev-java/java-config: 2.2.0-r4::gentoo dev-lang/perl: 5.30.3::gentoo dev-lang/python: 3.6.10-r2::gentoo, 3.7.7-r2::gentoo dev-util/pkgconfig: 0.29.2::gentoo sys-apps/baselayout: 2.6-r1::gentoo sys-apps/openrc: 0.41.2::gentoo sys-apps/sandbox: 2.18::gentoo sys-devel/autoconf: 2.69-r4::gentoo sys-devel/automake: 1.16.1-r1::gentoo sys-devel/binutils: 2.32-r1::gentoo, 2.33.1-r1::gentoo sys-devel/gcc: 9.3.0-r1::gentoo sys-devel/gcc-config: 2.3::gentoo sys-devel/libtool: 2.4.6-r6::gentoo sys-devel/make: 4.2.1-r4::gentoo sys-kernel/linux-headers: 5.4-r1::gentoo (virtual/os-headers) sys-libs/glibc: 2.30-r8::gentoo Repositories: gentoo location: /usr/portage sync-type: rsync sync-uri: rsync://gentoo.ftp.kg/gentoo-portage priority: -1000 sync-rsync-verify-max-age: 24 sync-rsync-verify-metamanifest: yes sync-rsync-extra-opts: sync-rsync-verify-jobs: 1 pentoo location: /var/db/overlays/pentoo-overlay sync-type: git sync-uri: https://github.com/pentoo/pentoo-overlay masters: gentoo ACCEPT_KEYWORDS="x86" ACCEPT_LICENSE="@FREE Oracle-BCLA-JavaSE" CBUILD="i686-pc-linux-gnu" CFLAGS="-march=prescott -O2 -pipe -fomit-frame-pointer -mno-tls-direct-seg-refs" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt" CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo" CXXFLAGS="-march=prescott -O2 -pipe -fomit-frame-pointer -mno-tls-direct-seg-refs" DISTDIR="/usr/portage/distfiles" EMERGE_DEFAULT_OPTS="--quiet-build" ENV_UNSET="DBUS_SESSION_BUS_ADDRESS DISPLAY GOBIN GOPATH PERL5LIB PERL5OPT PERLPREFIX PERL_CORE PERL_MB_OPT PERL_MM_OPT XAUTHORITY XDG_CACHE_HOME XDG_CONFIG_HOME XDG_DATA_HOME XDG_RUNTIME_DIR" FCFLAGS="-O2 -march=i686 -pipe" FEATURES="assume-digests binpkg-docompress binpkg-dostrip binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles ipc-sandbox merge-sync multilib-strict network-sandbox news parallel-fetch pid-sandbox preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr" FFLAGS="-O2 -march=i686 -pipe" GENTOO_MIRRORS="http://distfiles.gentoo.org" LANG="en_US.utf8" LC_ALL="en_US.utf8" LDFLAGS="-Wl,-O1 -Wl,--as-needed" PKGDIR="/usr/portage/packages" PORTAGE_CONFIGROOT="/" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git" PORTAGE_TMPDIR="/var/tmp" USE="acl bash-completion berkdb bzip2 cli crypt dri fortran gdbm iconv ipv6 libtirpc ncurses nls nptl openmp pam pcre readline seccomp split-usr ssl tcpd unicode x86 xattr zlib" ABI_X86="32" ADA_TARGET="gnat_2018" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="karbon sheets words" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx mmxext sse sse2 sse3 ssse3" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock greis isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="libinput" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" NGINX_MODULES_HTTP="autoindex charset proxy gzip gunzip limit_req limit_zone limit_conn map naxsi rewrite http2" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php7-2 php7-3" POSTGRES_TARGETS="postgres10 postgres11" PYTHON_SINGLE_TARGET="python3_6" PYTHON_TARGETS="python3_7 python3_6" RUBY_TARGETS="ruby25" USERLAND="GNU" VIDEO_CARDS="amdgpu fbdev intel nouveau radeon radeonsi vesa dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" Unset: CC, CPPFLAGS, CTARGET, CXX, INSTALL_MASK, LINGUAS, MAKEOPTS, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
> Can't locate Module/Build.pm in @INC (you may need to install the Module::Build module) Your install is broken, and you probably need to run perl-cleaner. If insisting on reopening, please include: - The full output of `perl -V` - The contents of /var/db/pkg/dev-perl/Module-Build*/CONTENTS Module-Build not being installed -> your install is broken, run perl-cleaner Module-Build not being installed in a path mentioned in the "@INC" section from perl -V -> your install is broken, run perl-cleaner.
Thanks, perl-cleaner --all fixed it indeed
