Hi, > I have setup the Diskless Nodes with Gentoo and when I boot up the slave > the node I am having problem. I am using kernel 2.6.5. When the slave > boots it hangs after ACPI:(support SO S1 S4 S5) and then starts sending > DHCP request.. > > System spec for both slave and master: > # Tyan Tiger MP(S2460) Dual AMD Motherboard > # AMD Athlon MP1600+ @ 266FSB > # 2 x 512MB 266MHz DDR PC2100 Reg ECC DIMM > # 3COM 905BTX PCI 10/100 > # Maxtor 20GB 7200rpm ATA133HDD Drive > Reproducible: Always Steps to Reproduce: 1. 2. 3.
I have similar problem with ACPI on this MB Tyan Tiger MP(S2460) I use kernel 2.6.5, 2.6.7, 2.6.8 and my machine work well on boot but when shutdown -h now or shutdown -r now the system does not off or reboot but sleep. If i try to reset the system does not reboot. I power off and power on to work correcly. Sorry for my bad english
These are not cluster problems. The bug is almost a year old. If the original poster can send (much) more information regarding his problem, there may be a resolution. Otherwise, the bug should be closed with WONTFIX. -JE
Nothing to do with this...closing the bug.