[V1.8.2 -> V1.8.3] 26th October 2015 Added SpyderCheckr24 scaning .cht and .cie files. Fixed USB problem with i1pro (Rev B & D ?), where communications would occasionally break down on fast systems. Added another fixed display intergration time to i1pro non-adaptive emission mode to cope with higher brightness displays. Added workaround for i1d3 Rev. B status code 0x83 on very low light measurement Fixed minor bug in i1d3.c that truncated serial number string. (Thanks to Mikael Sterner). Fixed bug in Klein K10 driver - adaptive measurement wasn't properly using all the extra measurements. Improved Klein K10 driver to be more robust when lights off command returns bogus error codes, or causes a cascade of bogus measurement errors. Added workaround for OS X 10.9+ "App Nap" problem. Added maximum sensor frequency check for Spyder & i1d3 drivers, so that erronious readings due to excessive brightness can't be missed. Changed chartread so that it doesn't warn of a possible wrong strip being read, nor allows bi-directional strip reading, if "printtarg -r" was used. A warning will be issued if "printtarg -r" was used, and "chartread -B" wasn't used. Fixed collink for eeColor Full range RGB to use output curve ("second" 1D curves) to compensate for cLUT being wired for 1.0 output from 1.0 input. Added "lp" gamut mapping intent :- Luminance Preserving Perceptual, for Photographers concerned with maintaining tonal variations. Fixed bugs in image specific gamut mapping that were degrading the accuracy of the result. Re-wrote gamut smoothing code, and re-tuned it to behave similarly to the V1.8.2 release. Changed default viewing condition glare to 5%, to smooth out shadow tone curve. Reduced the level of Helmholtz-Kohlrausch effect in CIECAM02 implementation in the light of visual experiments. Simply copying the ebuild like cp -p argyllcms-1.8.{2,3}.ebuild seems enough. But like 1.8.2, the upstream webserver transiently returns error 406 when downloading the tarball with portage.
Thanks for the report! 1.8.3 is now in tree The occasional 406 is bothersome, but at least for now the Gentoo mirrors manage to grab it quickly enough (so most of the users can download it easily)
