>>> Emerging (1 of 1) lxqt-base/lxqt-policykit-0.7.0-r1::gentoo * lxqt-policykit-0.7.0.tar.xz SHA256 SHA512 WHIRLPOOL size ;-) ... [ ok ] >>> Unpacking source... >>> Unpacking lxqt-policykit-0.7.0.tar.xz to /var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work >>> Source unpacked in /var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work >>> Preparing source in /var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work ... >>> Source prepared. >>> Configuring source in /var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work ... >>> Working in BUILD_DIR: "/var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work/lxqt-policykit-0.7.0_build" cmake --no-warn-unused-cli -C /var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work/lxqt-policykit-0.7.0_build/gentoo_common_config.cmake -G Unix Makefiles -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=Gentoo -DCMAKE_INSTALL_DO_STRIP=OFF -DCMAKE_USER_MAKE_RULES_OVERRIDE=/var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work/lxqt-policykit-0.7.0_build/gentoo_rules.cmake /var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work Not searching for unused variables given on the command line. loading initial cache file /var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work/lxqt-policykit-0.7.0_build/gentoo_common_config.cmake CMake Warning at CMakeLists.txt:10 (find_package): By not providing "FindPolkitQt-1.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "PolkitQt-1", but CMake did not find one. Could not find a package configuration file provided by "PolkitQt-1" with any of the following names: PolkitQt-1Config.cmake polkitqt-1-config.cmake Add the installation prefix of "PolkitQt-1" to CMAKE_PREFIX_PATH or set "PolkitQt-1_DIR" to a directory containing one of the above files. If "PolkitQt-1" provides a separate development package or SDK, be sure it has been installed. CMake Warning at CMakeLists.txt:13 (message): Qt bindings for policykit are not found. LxQt policykit integration won't be built -- Hint: package libpolkit-qt-1-devel on openSUSE -- <<< Gentoo configuration >>> Build type Gentoo Install path /usr Compiler flags: C C++ Linker flags: Executable Module Shared -- Configuring done -- Generating done -- Build files have been written to: /var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work/lxqt-policykit-0.7.0_build >>> Source configured. >>> Compiling source in /var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work ... >>> Working in BUILD_DIR: "/var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work/lxqt-policykit-0.7.0_build" make VERBOSE=1 /usr/bin/cmake -H/var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work -B/var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work/lxqt-policykit-0.7.0_build --check-build-system CMakeFiles/Makefile.cmake 0 /usr/bin/cmake -E cmake_progress_start /var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work/lxqt-policykit-0.7.0_build/CMakeFiles /var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work/lxqt-policykit-0.7.0_build/CMakeFiles/progress.marks make -f CMakeFiles/Makefile2 all make[1]: Entering directory '/var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work/lxqt-policykit-0.7.0_build' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work/lxqt-policykit-0.7.0_build' /usr/bin/cmake -E cmake_progress_start /var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work/lxqt-policykit-0.7.0_build/CMakeFiles 0 >>> Source compiled. >>> Test phase [not enabled]: lxqt-base/lxqt-policykit-0.7.0-r1 >>> Install lxqt-policykit-0.7.0-r1 into /var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/image/ category lxqt-base >>> Working in BUILD_DIR: "/var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work/lxqt-policykit-0.7.0_build" make install make: *** No rule to make target 'install'. Stop. * ERROR: lxqt-base/lxqt-policykit-0.7.0-r1::gentoo failed (install phase): * emake failed =============================================================== # emerge --info Portage 2.2.14_rc1 (python 3.3.5-final-0, default/linux/mips/13.0/mipsel/multilib/n32, gcc-4.8.3, glibc-2.19-r1, 3.10.20-rt14-Cavium-Octeon mips64) ================================================================= System uname: Linux-3.10.20-rt14-Cavium-Octeon-mips64-Cavium_Octeon_III_V0.1_FPU_V0.0-with-gentoo-2.2 KiB Mem: 511736 total, 12696 free KiB Swap: 7823616 total, 7819624 free Timestamp of tree: Thu, 02 Oct 2014 00:45:01 +0000 ld GNU ld (Gentoo 2.24 p1.4) 2.24 app-shells/bash: 4.2_p51 dev-lang/python: 2.7.8, 3.3.5-r1, 3.4.1 dev-util/cmake: 3.0.2 dev-util/pkgconfig: 0.28-r2 sys-apps/baselayout: 2.2 sys-apps/openrc: 0.13.1 sys-apps/sandbox: 2.6-r1 sys-devel/autoconf: 2.13, 2.69 sys-devel/automake: 1.14.1 sys-devel/binutils: 2.24-r3 sys-devel/gcc: 4.8.3 sys-devel/gcc-config: 1.8 sys-devel/libtool: 2.4.2-r1 sys-devel/make: 4.0-r1 sys-kernel/linux-headers: 3.16 (virtual/os-headers) sys-libs/glibc: 2.19-r1 Repositories: gentoo ACCEPT_KEYWORDS="mips ~mips" ACCEPT_LICENSE="* -@EULA" CBUILD="mips64el-unknown-linux-gnu" CFLAGS="-O2 -march=mips64r2 -mplt -pipe" CHOST="mips64el-unknown-linux-gnu" CONFIG_PROTECT="/etc" CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo" CXXFLAGS="-O2 -march=mips64r2 -mplt -pipe" DISTDIR="/usr/portage/distfiles" FCFLAGS="-O2 -pipe" FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync" FFLAGS="-O2 -pipe" GENTOO_MIRRORS="http://distfiles.gentoo.org" LANG="en_GB.utf8" LDFLAGS="-Wl,-O1 -Wl,--as-needed" PKGDIR="/usr/portage/packages" PORTAGE_CONFIGROOT="/" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="" USE="acl berkdb bzip2 cli cracklib crypt cxx gdbm iconv ipv6 mips modules multilib ncurses nls nptl pam pcre readline session ssl tcpd unicode zlib" ABI_MIPS="n32 o32" ALSA_CARDS="au1x00" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" RUBY_TARGETS="ruby19 ruby20" USERLAND="GNU" VIDEO_CARDS="fbdev impact newport dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, MAKEOPTS, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, SYNC, USE_PYTHON
It seems like you have no sys-auth/polkit-qt installed. But =lxqt-base/lxqt-policykit-0.7.0-r1 depends on it, so it seems to be a problem in your local configuration. Could you, please, check if sys-auth/polkit-qt is installed and show the command you are using for merging lxqt-policykit.
Created attachment 387034 [details] build.log (In reply to Jauhien Piatlicki from comment #1) > It seems like you have no sys-auth/polkit-qt installed. But > =lxqt-base/lxqt-policykit-0.7.0-r1 depends on it, so it seems to be a > problem in your local configuration. > > Could you, please, check if sys-auth/polkit-qt is installed I do have sys-auth/polkit-qt installed: # qlist -Iev polkit-qt sys-auth/polkit-qt-0.112.0 > and show the > command you are using for merging lxqt-policykit. # emerge -1 lxqt-base/lxqt-policykit
Did you compile polkit-qt with USE="qt4" set? If not maybe that could solve the problem. If that solves the problem the lxqt-policykit-0.7.0-r1 ebuild needs to be adjusted accordingly to depend on sys-auth/polkit-qt[qt4].
(In reply to Alpha Bravo from comment #3) > Did you compile polkit-qt with USE="qt4" set? Yes, sys-auth/polkit-qt was compiled with the qt4 USE flag enabled: # eix -e polkit-qt | grep Installed Installed versions: 0.112.0(23:08:45 03/10/14)(qt4 -debug -examples -qt5)
I still have no idea, what's wrong. Could you, please, try LXQt-0.8.0 from overlay or when it reaches the tree and report if you still have this problem? P.S. It is masked and needs Qt-5.
same here: problem is in the compile phase the package can´t find "polkitqt-1-config.cmake": "Not searching for unused variables given on the command line. loading initial cache file /var/tmp/portage/lxqt-base/lxqt-policykit-0.7.0-r1/work/lxqt-policykit-0.7.0_build/gentoo_common_config.cmake CMake Warning at CMakeLists.txt:10 (find_package): By not providing "FindPolkitQt-1.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "PolkitQt-1", but CMake did not find one. Could not find a package configuration file provided by "PolkitQt-1" with any of the following names: PolkitQt-1Config.cmake polkitqt-1-config.cmake Add the installation prefix of "PolkitQt-1" to CMAKE_PREFIX_PATH or set "PolkitQt-1_DIR" to a directory containing one of the above files. If "PolkitQt-1" provides a separate development package or SDK, be sure it has been installed. CMake Warning at CMakeLists.txt:13 (message): Qt bindings for policykit are not found. LxQt policykit integration won't be built " # eix polkit -I --only-names gnome-extra/polkit-gnome sys-auth/polkit sys-auth/polkit-kde-agent sys-auth/polkit-qt
(In reply to I am from comment #6) > same here: > > problem is in the compile phase the package can´t find > "polkitqt-1-config.cmake": > Please, show what USEe has the installed version of polkit-qt.
# eix polkit-qt [I] sys-auth/polkit-qt Available versions: 0.103.0{tbz2} 0.112.0{tbz2} {debug examples +qt4 qt5} Installed versions: 0.112.0{tbz2}(23:08:45 15.11.2014)(qt4 -debug -examples -qt5) Homepage: http://www.kde.org/ Description: PolicyKit Qt4 API wrapper library
"set(CMAKE_PREFIX_PATH ${CMAKE_PREFIX_PATH} "/usr/lib64/cmake/PolkitQt-1/")" in CMakeLists.txt solves the problem
I haven't been able to reproduce or see any other reports since LXQt was ported to Qt 5. Please reopen if the problem persists.
