NUT 2.4.3-r2: upsdrv, upsd and upsmon all start up fine. The attached UPS is a Liebert Powersure XT connected via usb using "/lib/nut/usbhid-ups -a liebert" Trying a user generated forced shutdown from root using "upsdrvctl -u nut shutdown" shuts the system down but not the UPS. The console log displays at the end the error message: Shutdown failed Driver failed to start Is the problem that "usbhid-ups" and the usb have already been shut down? For example, a UPS initiated shutdown gives in the logs: 01:27:34 shutdown[22454]: shutting down for system reboot 01:27:38 init: Switching to runlevel: 6 01:27:46 upsmon[22313]: Signal 15: exiting 01:27:46 upsd[5448]: User nut@127.0.0.1 logged out from UPS [liebert] 01:27:46 upsmon[22311]: upsmon parent: read 01:27:47 upsd[5448]: mainloop: Interrupted system call 01:27:47 upsd[5448]: Signal 15: exiting 01:27:47 usbhid-ups[22199]: Signal 15: exiting 01:28:21 mountd[4456]: Caught signal 15, un-registering and exiting. 01:28:21 rpc.statd[4382]: Caught signal 15, un-registering and exiting. 01:28:27 syslog-ng[4006]: Termination requested via signal, terminating; 01:28:27 syslog-ng[4006]: syslog-ng shutting down; version='3.1.2' Logging to file stops at this point. Further logging is shown on the screen including: Shutdown failed Driver failed to start The system must then be manually reset/restarted, the UPS remains on. Reproducible: Always Steps to Reproduce: 1.Cause a forced shutdown either by removing mains input or by giving upsdrvctl command 2. The PC runs through a shutdown sequence 3. Shutdown fails to complete Actual Results: The PC appears to halt but remains powered up, and the UPS remains powered up. Expected Results: Graceful shutdown of the PC followed by shutdown (auto power off) of the UPS. Followed by upon reapplication of mains power to the UPS: UPS power up and PC power up. Installed: * sys-power/nut Latest version available: 2.4.3-r2 Latest version installed: 2.4.3-r2 Size of files: 1,127 kB Homepage: http://www.networkupstools.org/ Description: Network-UPS Tools License: GPL-2 Curiously, the upscmd command lists no 'instant' commands: # upscmd -l liebert Instant commands supported on UPS [liebert]: Also note that the powerdown flag is "/etc/killpower". Does the nut user require write access to /etc to set that?...
This is on: 2.6.34-gentoo-r12 #1 SMP Thu Oct 28 18:02:35 BST 2010 x86_64 Intel(R) Atom(TM) CPU D510 @ 1.66GHz GenuineIntel GNU/Linux emerge fully up to date. Regards, Martin
Please post your `emerge --info' in a comment.
Portage 2.1.9.24 (default/linux/amd64/10.0/server, gcc-4.4.4, glibc-2.11.2-r3, 2.6.34-gentoo-r12_ml_atom21 x86_64) ================================================================= System uname: Linux-2.6.34-gentoo-r12_ml_atom21-x86_64-Intel-R-_Atom-TM-_CPU_D510_@_1.66GHz-with-gentoo-1.12.14 Timestamp of tree: Tue, 07 Dec 2010 23:30:01 +0000 app-shells/bash: 4.1_p7 dev-lang/python: 2.6.5-r3, 3.1.2-r4 dev-util/cmake: 2.8.1-r2 sys-apps/baselayout: 1.12.14-r1 sys-apps/sandbox: 2.3-r1 sys-devel/autoconf: 2.65-r1 sys-devel/automake: 1.10.3, 1.11.1 sys-devel/binutils: 2.20.1-r1 sys-devel/gcc: 4.4.4-r2 sys-devel/gcc-config: 1.4.1 sys-devel/libtool: 2.2.10 sys-devel/make: 3.81-r2 virtual/os-headers: 2.6.30-r1 (sys-kernel/linux-headers) ACCEPT_KEYWORDS="amd64" ACCEPT_LICENSE="* -@EULA" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=core2 -mtune=core2 -mcx16 -msahf -mmmx -msse -msse2 -msse3 -mssse3 -mfpmath=sse -Os -pipe -fomit-frame-pointer --param l1-cache-size=24 --param l1-cache-line-size=64 --param l2-cache-s ize=512" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /var/bind" CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-re build /etc/sandbox.d /etc/terminfo" CXXFLAGS="-march=core2 -mtune=core2 -mcx16 -msahf -mmmx -msse -msse2 -msse3 -mssse3 -mfpmath=sse -Os -pipe -fomit-frame-pointer --param l1-cache-size=24 --param l1-cache-line-size=64 --param l2-cache -size=512" DISTDIR="/usr/portage/distfiles" FEATURES="assume-digests binpkg-logs distlocks fixlafiles fixpackages news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch" GENTOO_MIRRORS="ftp://gentoo.virginmedia.com/sites/gentoo http://mirror.bytemark.co.uk/gentoo http://ftp.snt.utwente.nl/pub/os/linux/gentoo http://www.mirrorservice.org/sites/www.ibiblio.org/gentoo" LDFLAGS="-Wl,-O1 -Wl,--as-needed" LINGUAS="en" MAKEOPTS="-j5" PKGDIR="/var/tmp/binpkgs" PORTAGE_CONFIGROOT="/" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="X acl amd64 berkdb bzip2 cgi cli cracklib crypt cxx dkim dri ffmpeg fortran gdbm gnutls gpg gpm gstreamer iconv jpeg jpeg2k mmx modules mudflap multilib ncurses nls nptl nptlonly opengl openmp p am pcre png readline sasl session snmp spamassassin sse sse2 sse3 ssl ssse3 symlink sysfs tcpd tiff truetype unicode usb v4l v4l2 vim-syntax xml xorg zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-m odem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias au thn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires e xt_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" COLLECTD_PLUGINS="df i nterface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LI NGUAS="en" PHP_TARGETS="php5-2" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="intel vesa fbdev" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LANG, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY
I guess it won't change this bug, but just for the record, can you try 2.6.0 too?
Is there anything able to be done about this?
openrc/williamh: In the case of a powerfail shutdown, we need the UPS services to NOT be stopped at all. Suggestions welcomed as to how to do this sanely. We need these services to stay up: upsd upsdrv* (either base or symlinked to upsdrv) upsmon
@robbat2: You might look into setting up a powerfail or powerwait line in /etc/inittab and have a custom runlevel with only the ups services in it. You will also probably need a powerokwait line. Check man inittab for the info; let me know if you want me to write something up. I won't be able to test I don't think since I do not have the ups. William
williamh: If you want to write it, I can test it, having multiple UPS & systems.
