>>> Emerging (1 of 8) dev-libs/xmlrpc-c-1.18.02 bash: /dev/null: Permission denied bash: /dev/null: Permission denied * xmlrpc-c-1.18.02.tar.bz2 RMD160 SHA1 SHA256 size ;-) ... [ ok ] * checking ebuild checksums ;-) ... [ ok ] * checking auxfile checksums ;-) ... [ ok ] * checking miscfile checksums ;-) ... [ ok ] * This profile has not been tested thoroughly and is not considered to be * a supported server profile at this time. For a supported server * profile, please check the Hardened project (http://hardened.gentoo.org). * This profile is merely a convenience for people who require a more * minimal profile, yet are unable to use hardened due to restrictions in * the software being used on the server. This profile should also be used * if you require GCC 4.1 or Glibc 2.4 support. If you don't know if this * applies to you, then it doesn't and you should probably be using * Hardened, instead. * CPV: dev-libs/xmlrpc-c-1.18.02 * REPO: gentoo * USE: curl elibc_glibc kernel_linux threads userland_GNU x86 >>> Unpacking source... >>> Unpacking xmlrpc-c-1.18.02.tar.bz2 to /var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work >>> Source unpacked in /var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work >>> Preparing source in /var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02 ... * Applying dumpvalue.patch ... [ ok ] * Applying cpp-depends.patch ... [ ok ] * Applying dump-symlinks.patch ... [ ok ] >>> Source prepared. >>> Configuring source in /var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02 ... * econf: updating xmlrpc-c-1.18.02/config.guess with /usr/share/gnuconfig/config.guess * econf: updating xmlrpc-c-1.18.02/config.sub with /usr/share/gnuconfig/config.sub ./configure --prefix=/usr --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-wininet-client --disable-libwww-client --enable-libxml2-backend --disable-tools --enable-abyss-threads --disable-cgi-server --disable-abyss-server --disable-cplusplus --enable-curl-client configure: loading cache /dev/null /dev/null: line 1: ./configure:: No such file or directory checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking whether make sets $(MAKE)... yes checking for working aclocal... missing checking for working autoconf... found checking for working automake... missing checking for working autoheader... found checking for working makeinfo... found checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking whether to build Wininet client XML transport module... no checking whether to build Curl client XML transport module... yes checking whether to build Libwww client XML transport module... no checking for i686-pc-linux-gnu-gcc... i686-pc-linux-gnu-gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether i686-pc-linux-gnu-gcc accepts -g... yes checking for i686-pc-linux-gnu-gcc option to accept ANSI C... none needed checking for main in -lncurses... yes checking for main in -lreadline... yes checking whether to build tools... no checking whether to build Abyss server module... no checking whether to build CGI server module... no checking whether to build C++ wrappers and tools... no checking for i686-pc-linux-gnu-gcc... (cached) i686-pc-linux-gnu-gcc checking whether we are using the GNU C compiler... (cached) yes checking whether i686-pc-linux-gnu-gcc accepts -g... (cached) yes checking for i686-pc-linux-gnu-gcc option to accept ANSI C... (cached) none needed checking for socket... yes checking how to run the C preprocessor... i686-pc-linux-gnu-gcc -E checking for egrep... grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking wchar.h usability... yes checking wchar.h presence... yes checking for wchar.h... yes checking sys/filio.h usability... no checking sys/filio.h presence... no checking for sys/filio.h... no checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking stdarg.h usability... yes checking stdarg.h presence... yes checking for stdarg.h... yes checking for size_t... yes checking whether va_list is an array... no checking whether compiler has __attribute__... yes checking for vsnprintf... yes checking for wcsncmp... yes checking for setgroups... yes checking for asprintf... yes checking for setenv... yes checking for pselect... yes checking for gettimeofday... yes checking for localtime_r... yes checking for gmtime_r... yes checking for strcasecmp... yes checking for stricmp... no checking for _stricmp... no checking whether to use Abyss pthread function... yes checking for curl-xmlrpc-config... no checking for curl-config... /usr/bin/curl-config checking for curl library directory... /usr/lib checking whether to build the libxml2 backend... yes checking for xml2-config... yes configure: creating ./config.status config.status: creating srcdir.mk config.status: creating config.mk config.status: creating xmlrpc_config.h config.status: creating xmlrpc_amconfig.h config.status: executing default-1 commands >>> Source configured. >>> Compiling source in /var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02 ... make -j3 -r rm -f shell_config Lots of echoes to 'shell_config' suppressed here ... make -C include/ -f /var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02//include/Makefile \ all make[1]: Entering directory `/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/include' >xmlrpc-c/config.h Lots of echoes to 'xmlrpc-c/config.h' suppressed here ... make[1]: Leaving directory `/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/include' rm -f xmlrpc-c-config Echoes to 'xmlrpc-c-config' suppressed here ... cat shell_config >>xmlrpc-c-config cat xmlrpc-c-config.main >>xmlrpc-c-config rm -f xmlrpc-c-config.test Echoes to 'xmlrpc-c-config.test' suppressed here ... chmod a+rx xmlrpc-c-config cat shell_config >>xmlrpc-c-config.test cat xmlrpc-c-config.test.main >>xmlrpc-c-config.test make -C lib/ -f /var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02//lib/Makefile \ all make[1]: Entering directory `/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/lib' chmod a+rx xmlrpc-c-config.test make -C util/ -f /var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/lib/util/Makefile \ all make[2]: Entering directory `/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/lib/util' make -C libutil/ -f /var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/lib/libutil/Makefile \ all make -C /var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/ -f /var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/GNUmakefile version.h /var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/lib/util/Makefile:55: depend.mk: No such file or directory cat /dev/null >depend.mk make[2]: Entering directory `/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/lib/libutil' /var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/lib/libutil/Makefile:84: depend.mk: No such file or directory cat /dev/null >depend.mk make[2]: Entering directory `/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02' make[2]: Leaving directory `/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/lib/util' make[2]: Entering directory `/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/lib/util' rm -f version.h echo "/* Generated by make file rule */" >>version.h depend.mk:1: *** missing separator. Stop. make[2]: Leaving directory `/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/lib/util' make[1]: *** [util/all] Error 2 make[1]: *** Waiting for unfinished jobs.... make[2]: Leaving directory `/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/lib/libutil' make[2]: Entering directory `/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/lib/libutil' depend.mk:1: *** missing separator. Stop. make[2]: Leaving directory `/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/lib/libutil' make[1]: *** [libutil/all] Error 2 echo "#define XMLRPC_C_VERSION" \ \"Xmlrpc-c 1.18.2"\"" >>version.h echo "#define XMLRPC_VERSION_MAJOR 1" >>version.h echo "#define XMLRPC_VERSION_MINOR 18" >>version.h echo "#define XMLRPC_VERSION_POINT 2" >>version.h make[2]: Leaving directory `/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02' make[1]: Leaving directory `/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02/lib' make: *** [lib/all] Error 2 * ERROR: dev-libs/xmlrpc-c-1.18.02 failed: * Compiling failed * * Call stack: * ebuild.sh, line 54: Called src_compile * environment, line 2342: Called die * The specific snippet of code: * emake -r || die "Compiling failed" * * If you need support, post the output of 'emerge --info =dev-libs/xmlrpc-c-1.18.02', * the complete build log and the output of 'emerge -pqv =dev-libs/xmlrpc-c-1.18.02'. * The complete build log is located at '/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/temp/environment'. * S: '/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02' >>> Failed to emerge dev-libs/xmlrpc-c-1.18.02, Log file: >>> '/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/temp/build.log' * Messages for package dev-libs/xmlrpc-c-1.18.02: * ERROR: dev-libs/xmlrpc-c-1.18.02 failed: * Compiling failed * * Call stack: * ebuild.sh, line 54: Called src_compile * environment, line 2342: Called die * The specific snippet of code: * emake -r || die "Compiling failed" * * If you need support, post the output of 'emerge --info =dev-libs/xmlrpc-c-1.18.02', * the complete build log and the output of 'emerge -pqv =dev-libs/xmlrpc-c-1.18.02'. * The complete build log is located at '/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/temp/environment'. * S: '/var/tmp/portage/dev-libs/xmlrpc-c-1.18.02/work/xmlrpc-c-1.18.02' --- depend.mk:1: *** missing separator. Stop. ???? Reproducible: Always
A better question: /dev/null: line 1: ./configure:: No such file or directory Huh ? That one simply has to exist.
put to mask xmlrpc-c-1.18.02 fixed that issue, there is some issue with cmake look here http://bugs.gentoo.org/276333 I close this ticket (In reply to comment #1) > A better question: > /dev/null: line 1: ./configure:: No such file or directory I did not searchyeat for this issue yet > > Huh ? > That one simply has to exist. >
for anyone who need solution http://www.linuxforums.org/forum/linux-newbie/27030-bash-dev-null-permission-denied-why.html > (In reply to comment #1) > > A better question: > > /dev/null: line 1: ./configure:: No such file or directory > > I did not searchyeat for this issue yet > > > > > Huh ? > > That one simply has to exist. > > >