version 1.8.10 released 2008-08-08 * Added support for BULL IANA number. * Fixed contrib build so the oem_ibm_sel_map file gets included in rpm builds again. * Added support for Debian packages to be built from CVS * Fix for sdr and sel timestamp reporting issues * Fix for discrete sensor state print routines to address state bits 8-14 * Change ipmi_chassis_status() to non-static so it can be used externally * Added retries to SOL keepalive * Fix to stop sensor list command from reporting a failure due to missing sensor * Fix bug in sdr free space reporting * Add support for IANA number to vendor name conversion for many vendors * Fix segfault bug in lan set command * Fix bug in population of raw i2c wdata buffer * Fix bug in ipmb sensor reading * Fix misspellings, typos, incorrect strncmp lengths, white space * Update/fix printed help and usages for many commands * Add and update support for all commands in ipmitool man page * Fix for lanplus session re-open when the target becomes unavailable following a fw upgrade activation * Add support for watchdog timer shutoff, reset, and get info * Add support for more ibm systems in oem_ibm_sel_map * Add more JEDEC support info for DIMMs; decrease request size for DIMM FRU info to 16 bytes at a time to allow more DIMM FRUs to respond. * Fix to change hpmfwupg to version 1.02; fix to reduce hpmfwupg buffer length more aggressively when no response from iol * Fix HPM firmware activation via IOL; fake a timeout after IOL session re-open to force get upgrade status retry; Added retries on 0xD3 completion code * Add support for freeipmi 0.6.0; adjust autoconf for changes * Fix for oemval2str size * Add support for product name resolution in mc info * Fix FRU display format * Added PICMG ekeying analyzer module support (ekanalyzer); display point to point physical connectivity and power supply information between carriers and AMC modules; display matched results of ekeying match between an on-carrier device and AMC module or between 2 AMC modules * Fix AMC GUID display support * Improved amcportstate operations * Added resolution for new sensor types * Fix segfault in SOL * Fix bug that caused infinite loop on BMCs with empty SDRs * Fix to move out Kontron OEM sensor resolution for other OEMs which could lead to bad event descriptions * Add new FRU edit mode thereby allowing serial numbers, etc. to be changed; improvements to OEM edit mode * Added SPD support for parms: channel number, max read size * Add SDR support for adding SDR records from a dumped file, clearing SDR, adding partial SDR records * Add updates and fixes to hpmfwupg: upload block size to 32 bytes for KCS, handle long response option, implement rollback override, garbage output fix * Add double bridge lan support , fix bridging issue * Add HPM support to pre-check which components need to be skipped * Fix autodetection of maximum packet size when using IPMB * Add new Kontron OEM command to set the BIOS boot option sequence * Add support for dual-bridge/ dual send message * Add auto-detect for local IPMB address using PICMG 2.X extension * Add support for HPM.1 1.0 specification compliance * Fix for improper lan/lanplus addressing * Added transit_channel and transit_addr to ipmi_intf struct * Fix bad password assertion bug due to rakp2 HMAC not being checked properly * Added ability to interpret PPS shelf manager clia sel dump * Corrected PICMG M7 state event definition macros * Added FRU parsing enhancements * Added "isol info", "isol set" and "isol activate" commands to support Intel IPMI v1.5 SOL functionality. Removed "isol setup" command. * Fix bug in ipmi_lan_recv_packet() in lan and lanplus interfaces. * Fix bug in "chassis poh" command. * Fix HPM.1 upgrade to apply to only given component when instructed to do so * Added configure auto-detection if dual bridge extension is supported by OpenIPMI
version 1.8.11 released 2009-02-25 * Fix new GCC compilation issues in regards to Packing * Fix Tracker bug #1642710 - ipmi_kcs_drv being loaded/unloaded for 2.4 kernel instead of ipmi_si_drv driver module * New -y option added to allow specification of kg keys with non-printable characters * New -K option added to allow kgkey settings via environmental variable IPMI_KGKEY * Generic device support added for EEPROM with SDR Type 10h (gendev) * Fix to lan-bridging for a double-bridging crash and to fix an issue with bridging multiple concurrent requests and erroneous handling of raw Send Message * Lanplus fix for commands like 'sensor list' without the -t option causing wrong double bridged requests of a sensor is located on another satellite controller * Fix lan and lanplus request list entry removal bugs * Fix non-working issue when trying to send a bridge message with Cipher 3 * Change bridge message handling to reuse command ipmi_lan_poll_recv * Added PICMG 2.0 and 2.3 support * Fix PICMG (ATCA) extension verification and reversal of BCD encoded values for "major" and "minor" fields * Add IANA support for Pigeon Point * Add OEM SW/FW Record identification * Fix to include I2C and LUN addresses so sensors are correctly managed * Patch ID 1990560 to get readings from non-linear analog sensors * Add support for SOL payload status command * SOL set parameter range checking added * Fixed SOL activate options usage * Fixed crashes when parsing 'sol payload' and 'tsol' cmds (#216967) * Added retries to SOL keepalive * Fixed wrong mask values for Front Panel disable/enable status * Add support to access fru internal use area * Add support for new PICMG 3.0 R3.0 (March 24, 2008) to allow blocks of data within the FRU storage area to be write protected. * Fix node reporting in GUID; Tracker bug #2339675 * Fix watchdog use/action print strings * Fix endian bug in SDR add from file; Tracker bug #2075258 * Fix crash when dumping SDRs in a file and there's an error getting an SDR; improve algorithm for optimal packet size * Fix occasional SDR dump segfault; #1793076 * Allow ipmitool sel delete to accept hex list entry numbers * Fix SEL total space reporting. * Fix for garbage sensor threshold values reported when none returned. Tracker Bug #863748 * ipmievd change to Monitor %used in SEL buffer and log warnings when the buffer is 80% and 100% full
latest version currently available in portage is 1.8.9
InCVS.
thanks robin :)