With 2.4.21-pfeifer_pre1 I got a system freeze at boot during loading usb-ochi, with the 2.4.21-pfeifer_pre2 I got module loaded correctly, but nothing works (usb logitech mouse, usb-storage digital camera). With 2.4.20-gaming-r5 all works correctly. I have a nforce2-based motherboard, here is lspci -vvv: 00:00.0 Host bridge: nVidia Corporation: Unknown device 01e0 (rev a2) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Capabilities: [40] AGP version 3.0 Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=x1 Capabilities: [60] #08 [2001] 00:00.1 RAM memory: nVidia Corporation: Unknown device 01eb (rev a2) Subsystem: Unknown device 1695:1000 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:00.2 RAM memory: nVidia Corporation: Unknown device 01ee (rev a2) Subsystem: Unknown device 1695:1000 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:00.3 RAM memory: nVidia Corporation: Unknown device 01ed (rev a2) Subsystem: Unknown device 1695:1000 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:00.4 RAM memory: nVidia Corporation: Unknown device 01ec (rev a2) Subsystem: Unknown device 1695:1000 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:00.5 RAM memory: nVidia Corporation: Unknown device 01ef (rev a2) Subsystem: Unknown device 1695:1000 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a3) Subsystem: Unknown device 1695:1000 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [48] #08 [01e1] 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) Subsystem: Unknown device 1695:1000 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at dc00 [size=32] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 10 [OHCI]) Subsystem: Unknown device 1695:1000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 12 Region 0: Memory at eb087000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 10 [OHCI]) Subsystem: Unknown device 1695:1000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 11 Region 0: Memory at eb082000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) (prog-if 20 [EHCI]) Subsystem: Unknown device 1695:1000 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Interrupt: pin C routed to IRQ 5 Region 0: Memory at eb083000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] #0a [2080] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1) Subsystem: Unknown device 1695:1000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 12 Region 0: Memory at eb086000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at e000 [size=8] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:05.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia audio [Via VT82C686B] (rev a2) Subsystem: Unknown device 1695:1000 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (250ns min, 3000ns max) Interrupt: pin A routed to IRQ 12 Region 0: Memory at eb000000 (32-bit, non-prefetchable) [size=512K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) Subsystem: Unknown device 1695:1000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at e400 [size=256] Region 1: I/O ports at d000 [size=128] Region 2: Memory at eb080000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:08.0 PCI bridge: nVidia Corporation: Unknown device 006c (rev a3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000a000-0000afff Memory behind bridge: ea000000-eaffffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: Unknown device 1695:1000 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (750ns min, 250ns max) Region 4: I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: e9000000-e9ffffff Prefetchable memory behind bridge: d8000000-e7ffffff BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- 01:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RT8139 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at a000 [size=256] Region 1: Memory at ea000000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 03:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4144 (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc: Unknown device 0002 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at c000 [size=256] Region 2: Memory at e9020000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [58] AGP version 3.0 Status: RQ=255 SBA+ 64bit- FW+ Rate=x1,x2 Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 03:00.1 Display controller: ATI Technologies Inc: Unknown device 4164 Subsystem: ATI Technologies Inc: Unknown device 0003 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min), cache line size 08 Region 0: Memory at e0000000 (32-bit, prefetchable) [disabled] [size=128M] Region 1: Memory at e9030000 (32-bit, non-prefetchable) [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Reproducible: Always Steps to Reproduce: 1. Load usb-ohci 2. Load anything that uses usb (e.g.: hid, usbmouse) 3. Start /etc/init.d/gpm (needs to be configured to use /dev/input/mice) Actual Results: gpm could not load because /dev/input/mice not exists same problem for XFree Expected Results: gpm should load properly, same for XFree Portage 2.0.48-r1 (default-x86-1.4, gcc-3.2.3, glibc-2.3.2-r1) ================================================================= System uname: 2.4.20-gaming-r5 i686 AMD Athlon(tm) XP 2200+ GENTOO_MIRRORS="ftp://ftp.ibiblio.org/pub/linux/distributions/gentoo http://mirrors.sunsite.dk/gentoo/ ftp://sunsite.dk/mirrors/gentoo/ http://gentoo.linux.no/ ftp://gentoo.linux.no/pub/gentoo/ http://ftp.tu-clausthal.de/pub/linux/gentoo/ ftp://ftp.tu-clausthal.de/pub/linux/gentoo/ http://distro.ibiblio.org/gentoo " CONFIG_PROTECT="/etc /var/qmail/control /usr/kde/2/share/config /usr/kde/3/share/config /usr/X11R6/lib/X11/xkb /usr/kde/3.1/share/config /usr/share/config" CONFIG_PROTECT_MASK="/etc/gconf /etc/env.d" PORTDIR="/usr/portage" DISTDIR="/usr/portage/distfiles" PKGDIR="/usr/portage/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR_OVERLAY="" USE="x86 oss apm cups gif libg++ libwww mikmod nls quicktime spell xv alsa gdbm berkdb slang arts svga tcltk guile mysql tcpd esd gtk kde motif mozilla ldap X gtk2 3dnow aalib acpi avi cdr crypt directfb encode gd gpm gtkhtml imlib ipv6 java jikes jpeg maildir mmx mpeg mozsvg ncurses oggvorbis opengl pam pda pdflib perl png python qt readline samba sdl ssl tiff truetype usb xml xml2 xmms zlib gnome" COMPILER="gcc3" CHOST="i686-pc-linux-gnu" CFLAGS="-march=athlon-xp -O3 -pipe" CXXFLAGS="-O2 -mcpu=i686 -pipe" ACCEPT_KEYWORDS="x86 ~x86" MAKEOPTS="-j2" AUTOCLEAN="yes" SYNC="rsync://rsync1.it.gentoo.org/gentoo-portage" FEATURES="sandbox ccache"
ok. please 'Create a New Attachment' and attach your .config and the output of dmesg after you have modprobed the usb modules you mention. Thanks, Jay
Created attachment 14350 [details] dmesg output for 2.4.21-pfeifer-pre2 boot as requested, the dmesg output for the kernel and modules
Created attachment 14351 [details] dmesg output for 2.4.21-pfeifer-pre2 boot as requested, the dmesg output for the kernel and modules
Created attachment 14352 [details] dmesg output for 2.4.21-pfeifer-pre2 boot as requested, the dmesg output for the kernel and modules
Created attachment 14353 [details] The .config for my 2.4.21-pfeifer_pre2 kernel
Comment on attachment 14351 [details] dmesg output for 2.4.21-pfeifer-pre2 boot sorry... I got an error from the attach script and triple-posted!
Comment on attachment 14352 [details] dmesg output for 2.4.21-pfeifer-pre2 boot sorry... I got an error from the attach script and triple-posted!
please boot with acpi=off appended to your kernel options. Jay
oh, and also add pci=biosirq Jay
actually, nforce2 has some flaky apic issues. and it is known to not allocate and irq to the USB when all the on-board periperals are activated. you'll probably get success using 'noapic'. i've already contacted several others running nforce2 with usb mice and this kernel and no issues, however 2 of them are using noapic. Jay