Updating my notebook I unmerged sys-power/powersave (becuase of the hard mask and corresponding comment) and updated sys-power/kpowersave to version 0.7.3. Now, at first glance kpowersave seems to be running normally, but it cannot actually do anything. An "active scheme" change does not change dimming of the display (as it did previously), and a "suspend to ram" command (which worked flawlessly before) just locks the screen. I suspect d-bus permissions are missing. Reboot did not help. Any help would be appreciated. From ~/.xsession-errors : kpowersave: WARNING: Unknown error while aquire org.freedesktop.Policy.Power interface kpowersave: ERROR: Could not send dbus message: A security policy in place prevents this sender from sending this message to this recipient, see messag e bus configuration file (rejected message had interface "org.freedesktop.Hal.Device.LaptopPanel" member "GetBrightness" error name "(unset)" destinati on "org.freedesktop.Hal") kpowersave: ERROR: Could not send dbus message: The name org.freedesktop.PolicyKit was not provided by any .service files kpowersave: ERROR: Could not send dbus message: The name org.freedesktop.PolicyKit was not provided by any .service files kpowersave: ERROR: Could not send dbus message: The name org.freedesktop.PolicyKit was not provided by any .service files kpowersave: WARNING: Property: power_management.can_standby for: /org/freedesktop/Hal/devices/computer doesn't exist. kpowersave: WARNING: Property: battery.remaining_time for: /org/freedesktop/Hal/devices/acpi_BAT0 doesn't exist. kpowersave: WARNING: Property: battery.remaining_time for: /org/freedesktop/Hal/devices/acpi_BAT0 doesn't exist. kpowersave: ERROR: Could not send dbus message: The name org.freedesktop.PolicyKit was not provided by any .service files kpowersave: ERROR: Could not send dbus message: The name org.freedesktop.PolicyKit was not provided by any .service files kpowersave: ERROR: Could not send dbus message: A security policy in place prevents this sender from sending this message to this recipient, see messag e bus configuration file (rejected message had interface "org.freedesktop.Hal.Device.SystemPowerManagement" member "SetPowerSave" error name "(unset)" destination "org.freedesktop.Hal") kpowersave: ERROR: Could not call/set SetPowerSave on HAL, could be a bug in HAL spec kpowersave: ERROR: Could not send dbus message: A security policy in place prevents this sender from sending this message to this recipient, see messag e bus configuration file (rejected message had interface "org.freedesktop.Hal.Device.LaptopPanel" member "GetBrightness" error name "(unset)" destinati on "org.freedesktop.Hal") kpowersave: ERROR: Could not send dbus message: A security policy in place prevents this sender from sending this message to this recipient, see messag e bus configuration file (rejected message had interface "org.freedesktop.Hal.Device.SystemPowerManagement" member "SetPowerSave" error name "(unset)" destination "org.freedesktop.Hal") kpowersave: ERROR: Could not call/set SetPowerSave on HAL, could be a bug in HAL spec kpowersave: ERROR: Could not send dbus message: A security policy in place prevents this sender from sending this message to this recipient, see messag e bus configuration file (rejected message had interface "org.freedesktop.Hal.Device.LaptopPanel" member "GetBrightness" error name "(unset)" destinati on "org.freedesktop.Hal") kpowersave: ERROR: Could not send dbus message: The name org.freedesktop.PolicyKit was not provided by any .service files kpowersave: ERROR: Could not send dbus message: A security policy in place prevents this sender from sending this message to this recipient, see messag e bus configuration file (rejected message had interface "org.freedesktop.Hal.Device.SystemPowerManagement" member "SetPowerSave" error name "(unset)" destination "org.freedesktop.Hal") kpowersave: ERROR: Could not call/set SetPowerSave on HAL, could be a bug in HAL spec kpowersave: ERROR: Could not send dbus message: A security policy in place prevents this sender from sending this message to this recipient, see messag e bus configuration file (rejected message had interface "org.freedesktop.Hal.Device.LaptopPanel" member "GetBrightness" error name "(unset)" destinati on "org.freedesktop.Hal") kpowersave: ERROR: Could not send dbus message: The name org.freedesktop.PolicyKit was not provided by any .service files kpowersave: WARNING: Could not umount external storage partitions. kpowersave: ERROR: Could not get argument from reply: Argument 0 is specified to be of type "int32", but is actually of type "string" kpowersave: kpowersave: WARNING: dbusHAL::callBackSuspend dbus_message_get_args failed, maybe timouted
Hi, can you please make sure you are in the plugdev group? Also what hal version are you using? Try a newer one maybe.. emerge info would be cool. Are you maybe using policykit? That is not recommended..
Thanks a lot- > can you please make sure you are in the plugdev group? Adding myself to the plugdev group solved most (but not all) problems. (Where is this documented?) Changing the active scheme now sets display brightness and CPU frequency correctly. But - when I initiate a manual suspend to ram with kpowersave, I still get a dialog box: "Could not umount external media before suspend / standby. (Reason: Could not call DCOP interface to umount external media.) Would you like to continue...?" Since I had no external media mounted, I continued and suspend to ram works fine. Any clue where the remaining config error might be? > Also what hal version > are you using? Try a newer one maybe.. sys-apps/hal-0.5.9.1-r3 I can try a newer version if you now still think this is useful. (I'd like to keep the number of unstable packages at a reasonable minimum on the machine though...) > > emerge info would be cool. bellini ~ # emerge --info Portage 2.1.4.4 (default-linux/x86/2007.0, gcc-4.1.2, glibc-2.6.1-r0, 2.6.24.2-akh3 i686) ================================================================= System uname: 2.6.24.2-akh3 i686 Intel(R) Pentium(R) M processor 2.00GHz Timestamp of tree: Mon, 17 Mar 2008 23:30:01 +0000 app-shells/bash: 3.2_p17-r1 dev-java/java-config: 1.3.7, 2.1.4 dev-lang/python: 2.4.4-r6, 2.5.1-r5 dev-python/pycrypto: 2.0.1-r6 sys-apps/baselayout: 1.12.11.1 sys-apps/sandbox: 1.2.18.1-r2 sys-devel/autoconf: 2.13, 2.61-r1 sys-devel/automake: 1.4_p6, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10 sys-devel/binutils: 2.18-r1 sys-devel/gcc-config: 1.4.0-r4 sys-devel/libtool: 1.5.26 virtual/os-headers: 2.6.23-r3 ACCEPT_KEYWORDS="x86" CBUILD="i686-pc-linux-gnu" CFLAGS="-O2 -march=pentium-m -pipe" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/config" CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild /etc/terminfo /etc/texmf/web2c /etc/udev/rules.d" CXXFLAGS="-O2 -march=pentium-m -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="collision-protect distlocks metadata-transfer sandbox sfperms strict unmerge-orphans userfetch" GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/linux/distributions/gentoo" LANG="de_DE.UTF-8" LINGUAS="en de nl" MAKEOPTS="-j2" PKGDIR="/usr/portage/packages" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="X accessibility acl acpi alsa arts bash-completion berkdb bluetooth bzip2 cdparanoia cdr cli cracklib crypt css cups curl dbus dga dri dvdread emacs encode exif ffmpeg firefox fortran gdbm gif gnuplot gpm gps gtk hal iconv imagemagick imap isdnlog java jpeg kde latex ldap lm_sensors mbox midi mime mmx mp3 mpeg mplayer mudflap ncurses nls nptl nptlonly nsplugin opengl openmp pam pcre perl php png pppd python qt3 qt4 rdesktop readline reflection resolvconf sasl scanner session spl sse sse2 ssl subversion svg syslog tcpd tetex tiff unicode usb x86 xcomposite xine xorg zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en de nl" USERLAND="GNU" VIDEO_CARDS="apm ark chips cirrus cyrix dummy fbdev glint i128 i740 i810 imstt mach64 mga neomagic nsc nv r128 radeon rendition s3 s3virge savage siliconmotion sis sisusb tdfx tga trident tseng v4l vesa vga via vmware voodoo" Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, LDFLAGS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS > > Are you maybe using policykit? That is not recommended.. > No, definitely not. (At least I don't know this program and esearch tells me it is not installed (and hard-masked).) Here are the remaining errors from .xsession-errors: kpowersave: WARNING: Unknown error while aquire org.freedesktop.Policy.Power interface kpowersave: ERROR: Could not get argument from reply: Argument 0 is specified to be of type "int32", but is actually of type "uint32" kpowersave: kpowersave: ERROR: Could not send dbus message: The name org.freedesktop.PolicyKit was not provided by any .service files kpowersave: ERROR: Could not send dbus message: The name org.freedesktop.PolicyKit was not provided by any .service files kpowersave: ERROR: Could not send dbus message: The name org.freedesktop.PolicyKit was not provided by any .service files kpowersave: WARNING: Property: power_management.can_standby for: /org/freedesktop/Hal/devices/computer doesn't exist. kpowersave: WARNING: Property: battery.remaining_time for: /org/freedesktop/Hal/devices/acpi_BAT0 doesn't exist. kpowersave: WARNING: Property: battery.remaining_time for: /org/freedesktop/Hal/devices/acpi_BAT0 doesn't exist. kpowersave: ERROR: Could not send dbus message: The name org.freedesktop.PolicyKit was not provided by any .service files kpowersave: ERROR: Could not send dbus message: The name org.freedesktop.PolicyKit was not provided by any .service files kpowersave: ERROR: Could not send dbus message: Method "SetPowerSave" with signature "b" on interface "org.freedesktop.Hal.Device.SystemPowerManagement" doesn't exist kpowersave: kpowersave: ERROR: Could not call/set SetPowerSave on HAL, could be a bug in HAL spec kpowersave: ERROR: Could not get argument from reply: Argument 0 is specified to be of type "int32", but is actually of type "uint32" kpowersave: kpowersave: ERROR: Could not send dbus message: Method "SetPowerSave" with signature "b" on interface "org.freedesktop.Hal.Device.SystemPowerManagement" doesn't exist kpowersave: kpowersave: ERROR: Could not call/set SetPowerSave on HAL, could be a bug in HAL spec kpowersave: ERROR: Could not get argument from reply: Argument 0 is specified to be of type "int32", but is actually of type "uint32" kpowersave: kpowersave: ERROR: Could not send dbus message: The name org.freedesktop.PolicyKit was not provided by any .service files kpowersave: ERROR: Could not send dbus message: Method "SetPowerSave" with signature "b" on interface "org.freedesktop.Hal.Device.SystemPowerManagement" doesn't exist kpowersave: kpowersave: ERROR: Could not call/set SetPowerSave on HAL, could be a bug in HAL spec kpowersave: ERROR: Could not get argument from reply: Argument 0 is specified to be of type "int32", but is actually of type "uint32" kpowersave: kpowersave: ERROR: Could not send dbus message: The name org.freedesktop.PolicyKit was not provided by any .service files kpowersave: WARNING: Could not umount external storage partitions. kpowersave: ERROR: Could not get argument from reply: Argument 0 is specified to be of type "int32", but is actually of type "uint32" kpowersave: kpowersave: WARNING: dbusHAL::callBackSuspend dbus_message_get_args failed, maybe timouted kpowersave: WARNING: Property: info.capabilities for: /org/freedesktop/Hal/devices/usb_device_46d_c00e_noserial doesn't exist. kpowersave: WARNING: Property: info.capabilities for: /org/freedesktop/Hal/devices/usb_device_ffffffff_ffffffff_noserial doesn't exist. kpowersave: WARNING: Property: info.capabilities for: /org/freedesktop/Hal/devices/usb_device_483_2016_noserial doesn't exist. kpowersave: WARNING: Property: info.capabilities for: /org/freedesktop/Hal/devices/usb_device_483_2016_noserial_if0 doesn't exist. WARNING: DCOPReply<>: cast to 'QStringList' error WARNING: DCOPReply<>: cast to 'QString' error
it is mentioned when installing hal :-) The little messages hal spits out that everyone ignores.. do you use kde? Is dcop available? you can try it on the commandline. But I think this is all just configuration ;-) Better to continue on the forums or mailing lists or irc... closing as fixed.
(In reply to comment #3) > it is mentioned when installing hal :-) The little messages hal spits out that > everyone ignores.. > > do you use kde? Is dcop available? you can try it on the commandline. But I > think this is all just configuration ;-) Better to continue on the forums or > mailing lists or irc... > > closing as fixed. > What message is that? I get the following from kpowersave if I run it in a terminal and it doesn't poll, it just gets stuck at the battery/AC state when I first start the machine. I get the right info out of sysfs, the old proc interface is disabled, I'm using gentoo-sources-2.6.24-r3 kpowersave: WARNING: Unknown error while aquire org.freedesktop.Policy.Power interface kpowersave: WARNING: Error while lookup privileges: HAL is not built with PolicyKit support kpowersave: WARNING: Error while lookup privileges: HAL is not built with PolicyKit support kpowersave: WARNING: Error while lookup privileges: HAL is not built with PolicyKit support kpowersave: WARNING: Property: power_management.can_standby for: /org/freedesktop/Hal/devices/computer doesn't exist. kpowersave: WARNING: Property: battery.serial for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Property: battery.charge_level.capacity_state for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Property: battery.charge_level.unit for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Couldn't request charge_level.unit for udi: /org/freedesktop/Hal/devices/computer_power_supply_0 kpowersave: WARNING: Property: battery.charge_level.design for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Property: battery.remaining_time for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Property: battery.serial for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Property: battery.charge_level.capacity_state for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Property: battery.charge_level.unit for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Couldn't request charge_level.unit for udi: /org/freedesktop/Hal/devices/computer_power_supply_0 kpowersave: WARNING: Property: battery.charge_level.design for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Property: battery.remaining_time for: /org/freedesktop/Hal/devices/computer_power_supply_0 doesn't exist. kpowersave: WARNING: Error while lookup privileges: HAL is not built with PolicyKit support kpowersave: WARNING: Error while lookup privileges: HAL is not built with PolicyKit support kpowersave: WARNING: Error while lookup privileges: HAL is not built with PolicyKit support
I get a similar problem with 0.7.3, and I am in the plugdev group: kpowersave: ERROR: Could not get argument from reply: Argument 0 is specified to be of type "int32", but is actually of type "string" kpowersave: kpowersave: WARNING: dbusHAL::callBackSuspend dbus_message_get_args failed, maybe timouted I tried suspend-to-disk, but it also only locks the screen like it did for Andreas. I have sys-power/suspend installed, s2disk called as root works. Shall I create a new bugreport for this? Or will this one be reopened? If this is a configuration issue, there should be a hint somewhere that additional configuration is required...
When starting kpowersave-0.7.3 I also get these errors: kpowersave: WARNING: Unknown error while aquire org.freedesktop.Policy.Power interface kpowersave: WARNING: Property: laptop_panel.brightness_in_hardware for: /org/freedesktop/Hal/devices/computer_backlight_0 doesn't exist. kpowersave: WARNING: Error while lookup privileges: HAL is not built with PolicyKit support kpowersave: WARNING: Error while lookup privileges: HAL is not built with PolicyKit support kpowersave: WARNING: Error while lookup privileges: HAL is not built with PolicyKit support kpowersave: WARNING: Property: power_management.can_standby for: /org/freedesktop/Hal/devices/computer doesn't exist. kpowersave: WARNING: Property: battery.serial for: /org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0 doesn't exist. kpowersave: WARNING: Property: battery.charge_level.capacity_state for: /org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0 doesn't exist. kpowersave: WARNING: Property: battery.charge_level.unit for: /org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0 doesn't exist. kpowersave: WARNING: Couldn't request charge_level.unit for udi: /org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0 kpowersave: WARNING: Property: battery.remaining_time for: /org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0 doesn't exist. kpowersave: WARNING: Property: battery.serial for: /org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0 doesn't exist. kpowersave: WARNING: Property: battery.charge_level.capacity_state for: /org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0 doesn't exist. kpowersave: WARNING: Property: battery.charge_level.unit for: /org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0 doesn't exist. kpowersave: WARNING: Couldn't request charge_level.unit for udi: /org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0 kpowersave: WARNING: Property: battery.remaining_time for: /org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0 doesn't exist. kpowersave: WARNING: Error while lookup privileges: HAL is not built with PolicyKit support kpowersave: WARNING: Error while lookup privileges: HAL is not built with PolicyKit support kpowersave: WARNING: Error while lookup privileges: HAL is not built with PolicyKit support Although, they look non fatal since the app successfully detaches from the terminal. Changing powerstates, suspend to ram, everything is working for me. I'm in plugdev group and hal is built with laptop use flag. - - sys-apps/hal-0.5.11-r1 USE="X acpi crypt doc laptop -apm -debug -dell -disk-partition (-selinux)" sys-power/kpowersave-0.7.3 USE="-arts -debug -xinerama" Portage 2.1.4.4 (default-linux/amd64/2007.0, gcc-4.1.2, glibc-2.6.1-r0, 2.6.24-gentoo-r8 x86_64) ================================================================= System uname: 2.6.24-gentoo-r8 x86_64 AMD Turion(tm) 64 X2 Mobile Technology TL-56 Timestamp of tree: Mon, 07 Jul 2008 04:32:01 +0000 distcc 2.18.3 x86_64-pc-linux-gnu (protocols 1 and 2) (default port 3632) [disabled] ccache version 2.4 [enabled] app-shells/bash: 3.2_p33 dev-java/java-config: 1.3.7, 2.1.6 dev-lang/python: 2.4.4-r13 dev-python/pycrypto: 2.0.1-r6 dev-util/ccache: 2.4-r7 sys-apps/baselayout: 1.12.11.1 sys-apps/sandbox: 1.2.18.1-r2 sys-devel/autoconf: 2.13, 2.61-r2 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10.1 sys-devel/binutils: 2.18-r1 sys-devel/gcc-config: 1.4.0-r4 sys-devel/libtool: 1.5.26 virtual/os-headers: 2.6.23-r3 ACCEPT_KEYWORDS="amd64" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=k8 -Os -msse3 -pipe" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/config /var/bind" CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild /etc/splash /etc/terminfo /etc/texmf/web2c /etc/udev/rules.d" CXXFLAGS="-march=k8 -Os -msse3 -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="ccache collision-protect distlocks metadata-transfer multilib-strict parallel-fetch sandbox sfperms strict unmerge-orphans userfetch" GENTOO_MIRRORS="http://darkstar.ist.utl.pt/gentoo/ http://cesium.di.uminho.pt/pub/gentoo/" LANG="pt_PT@euro" LINGUAS="en pt pt_PT" MAKEOPTS="-j4" PKGDIR="/usr/portage/packages" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="3dnow 3dnowext X a52 aac acpi alsa amd64 amr amrnb amrwb bash-completion berkdb branding bzip2 cairo cli cracklib crypt cups dbus devhelp divx doc dvd dvdr emerald encode exif fam ffmpeg firefox flac fortran gd gdbm gif gimp glade glib glitz gstreamer gtk gtkspell hal hddtemp iconv ieee1394 imagemagick insecure-savers isdnlog javascript jpeg jpeg2k kde kqemu lame laptop libcaca libnotify midi mmx mmxext mp2 mp3 mp4 mpeg mplayer mudflap musicbrainz mysql ncurses nls nptl nptlonly offensive ogg opengl openmp pam pcre png pppd python quicktime readline realmedia reflection samba sdl session smp sndfile sourceview spell spl sse sse2 ssl stream svg syslog taglib tcpd threads tiff truetype type1 unicode v4l v4l2 vhosts vim-syntax vorbis wifi wmp xcomposite xfs xorg xosd xpm xscreensaver xvid zlib" ALSA_CARDS="hda-intel" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CAMERAS="spca50x" ELIBC="glibc" INPUT_DEVICES="keyboard mouse evdev synaptics joystick" KERNEL="linux" LCD_DEVICES="xosd" LINGUAS="en pt pt_PT" USERLAND="GNU" VIDEO_CARDS="nv nvidia none" Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, LDFLAGS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
Why is this bug closed? I am having same problems too? Tried 4-5 hal version but couldnt do anything. Does anybody managed to solve this?
