hi! when i try to emerge qt-dcgui-0.2.5, it always fails with this error, while dclib emerges fine: >>> Unpacking source... >>> Unpacking dcgui-0.2.5.tar.bz2 >>> Source unpacked. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for a BSD-compatible install... /bin/install -c checking for -p flag to install... yes checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets ${MAKE}... yes checking for i686-pc-linux-gnu-strip... no checking for strip... strip ./configure: line 1971: LRELEASE# : command not found checking for style of include used by make... GNU checking for i686-pc-linux-gnu-gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking dependency style of gcc... gcc3 checking for xml2-config... /usr/bin/xml2-config checking for libxml - version >= 2.0.0... yes (version 2.4.24) checking for i686-pc-linux-gnu-gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ANSI C... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking for i686-pc-linux-gnu-g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking whether g++ supports -Wundef... yes checking whether g++ supports -Wno-long-long... yes checking whether g++ supports -Wnon-virtual-dtor... yes checking whether g++ supports -fno-exceptions... yes checking whether g++ supports -fno-check-new... yes checking whether g++ supports -fexceptions... yes checking how to run the C++ preprocessor... g++ -E checking whether g++ supports -frepo... yes checking for ld used by GCC... /usr/i686-pc-linux-gnu/bin/ld checking if the linker (/usr/i686-pc-linux-gnu/bin/ld) is GNU ld... yes checking for /usr/i686-pc-linux-gnu/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking for a sed that does not truncate output... checking whether ln -s works... yes checking how to recognise dependant libraries... pass_all checking for egrep... grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking the maximum length of command line arguments... 32768 checking command to parse nm output from gcc object... ok checking for objdir... .libs checking for i686-pc-linux-gnu-ranlib... no checking for ranlib... ranlib checking for i686-pc-linux-gnu-strip... strip checking if gcc static flag works... no checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking dynamic linker characteristics... GNU/Linux ld.so checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating libtool appending configuration tag "CXX" to libtool checking whether the g++ linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... yes checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking dynamic linker characteristics... GNU/Linux ld.so appending configuration tag "GCJ" to libtool checking if gcj supports -fno-rtti -fno-exceptions... (cached) no checking for gcj option to produce PIC... -fPIC checking if gcj PIC flag -fPIC works... no checking if gcj supports -c -o file.o... no checking whether the gcj linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... yes checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking dynamic linker characteristics... GNU/Linux ld.so checking for main in -lutil... yes checking for main in -lcompat... no checking for crypt in -lcrypt... yes checking for socklen_t... socklen_t checking for dnet_ntoa in -ldnet... no checking for dnet_ntoa in -ldnet_stub... no checking for inet_ntoa... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking crt_externs.h usability... no checking crt_externs.h presence... no checking for crt_externs.h... no checking for _NSGetEnviron... no checking for sys/types.h... (cached) yes checking for stdint.h... (cached) yes checking for poll in -lpoll... no checking CoreAudio/CoreAudio.h usability... no checking CoreAudio/CoreAudio.h presence... no checking for CoreAudio/CoreAudio.h... no checking for res_init... yes checking if res_init needs custom prototype... no checking for killpg in -lucb... no checking for int... yes checking size of int... 4 checking for long... yes checking size of long... 4 checking for char *... yes checking size of char *... 4 checking for char... yes checking size of char... 1 checking for dlopen in -ldl... yes checking for shl_unload in -ldld... no checking for vsnprintf... yes checking for snprintf... yes not using lib directory suffix checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include checking for IceConnectionNumber in -lICE... yes checking for libXext... yes checking for Xinerama... no checking for pthread_create in -lpthread... yes checking for extra includes... no checking for extra libs... no checking for libz... -lz checking for libpng... -lpng -lz -lm checking for libjpeg6b... no checking for libjpeg... -ljpeg checking for Qt... libraries /usr/qt/3/lib, headers /usr/qt/3/include using -mt checking if Qt compiles without flags... no checking for moc... /usr/qt/3/bin/moc checking for lrelease... /usr/qt/3/bin/lrelease checking for uic... /usr/qt/3/bin/uic checking whether uic supports -L ... yes checking whether uic supports -nounload ... yes checking if Qt needs -ljpeg... no checking for sigcontext... yes checking for sigcontext linux... yes checking for sigcontext freebsd... no checking for dlopen in -ldl... (cached) yes checking for shl_unload in -ldld... (cached) no configure: creating ./config.status config.status: creating Makefile config.status: creating dcgui.spec config.status: creating dcgui.lsm config.status: creating dcgui/Makefile config.status: creating dcgui/docs/Makefile config.status: creating dcgui/docs/en/Makefile config.status: creating dcgui/res/Makefile config.status: creating config.h config.status: executing depfiles commands make all-recursive make[1]: Entering directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5' Making all in dcgui make[2]: Entering directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5/dcgui' Making all in docs make[3]: Entering directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5/dcgui/docs' Making all in en make[4]: Entering directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5/dcgui/docs/en' make[4]: F
hi! when i try to emerge qt-dcgui-0.2.5, it always fails with this error, while dclib emerges fine: >>> Unpacking source... >>> Unpacking dcgui-0.2.5.tar.bz2 >>> Source unpacked. configure: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used. checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for a BSD-compatible install... /bin/install -c checking for -p flag to install... yes checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets ${MAKE}... yes checking for i686-pc-linux-gnu-strip... no checking for strip... strip ./configure: line 1971: LRELEASE# : command not found checking for style of include used by make... GNU checking for i686-pc-linux-gnu-gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking dependency style of gcc... gcc3 checking for xml2-config... /usr/bin/xml2-config checking for libxml - version >= 2.0.0... yes (version 2.4.24) checking for i686-pc-linux-gnu-gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ANSI C... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking for i686-pc-linux-gnu-g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking whether g++ supports -Wundef... yes checking whether g++ supports -Wno-long-long... yes checking whether g++ supports -Wnon-virtual-dtor... yes checking whether g++ supports -fno-exceptions... yes checking whether g++ supports -fno-check-new... yes checking whether g++ supports -fexceptions... yes checking how to run the C++ preprocessor... g++ -E checking whether g++ supports -frepo... yes checking for ld used by GCC... /usr/i686-pc-linux-gnu/bin/ld checking if the linker (/usr/i686-pc-linux-gnu/bin/ld) is GNU ld... yes checking for /usr/i686-pc-linux-gnu/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking for a sed that does not truncate output... checking whether ln -s works... yes checking how to recognise dependant libraries... pass_all checking for egrep... grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking the maximum length of command line arguments... 32768 checking command to parse nm output from gcc object... ok checking for objdir... .libs checking for i686-pc-linux-gnu-ranlib... no checking for ranlib... ranlib checking for i686-pc-linux-gnu-strip... strip checking if gcc static flag works... no checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking dynamic linker characteristics... GNU/Linux ld.so checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating libtool appending configuration tag "CXX" to libtool checking whether the g++ linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... yes checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking dynamic linker characteristics... GNU/Linux ld.so appending configuration tag "GCJ" to libtool checking if gcj supports -fno-rtti -fno-exceptions... (cached) no checking for gcj option to produce PIC... -fPIC checking if gcj PIC flag -fPIC works... no checking if gcj supports -c -o file.o... no checking whether the gcj linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... yes checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking dynamic linker characteristics... GNU/Linux ld.so checking for main in -lutil... yes checking for main in -lcompat... no checking for crypt in -lcrypt... yes checking for socklen_t... socklen_t checking for dnet_ntoa in -ldnet... no checking for dnet_ntoa in -ldnet_stub... no checking for inet_ntoa... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking crt_externs.h usability... no checking crt_externs.h presence... no checking for crt_externs.h... no checking for _NSGetEnviron... no checking for sys/types.h... (cached) yes checking for stdint.h... (cached) yes checking for poll in -lpoll... no checking CoreAudio/CoreAudio.h usability... no checking CoreAudio/CoreAudio.h presence... no checking for CoreAudio/CoreAudio.h... no checking for res_init... yes checking if res_init needs custom prototype... no checking for killpg in -lucb... no checking for int... yes checking size of int... 4 checking for long... yes checking size of long... 4 checking for char *... yes checking size of char *... 4 checking for char... yes checking size of char... 1 checking for dlopen in -ldl... yes checking for shl_unload in -ldld... no checking for vsnprintf... yes checking for snprintf... yes not using lib directory suffix checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include checking for IceConnectionNumber in -lICE... yes checking for libXext... yes checking for Xinerama... no checking for pthread_create in -lpthread... yes checking for extra includes... no checking for extra libs... no checking for libz... -lz checking for libpng... -lpng -lz -lm checking for libjpeg6b... no checking for libjpeg... -ljpeg checking for Qt... libraries /usr/qt/3/lib, headers /usr/qt/3/include using -mt checking if Qt compiles without flags... no checking for moc... /usr/qt/3/bin/moc checking for lrelease... /usr/qt/3/bin/lrelease checking for uic... /usr/qt/3/bin/uic checking whether uic supports -L ... yes checking whether uic supports -nounload ... yes checking if Qt needs -ljpeg... no checking for sigcontext... yes checking for sigcontext linux... yes checking for sigcontext freebsd... no checking for dlopen in -ldl... (cached) yes checking for shl_unload in -ldld... (cached) no configure: creating ./config.status config.status: creating Makefile config.status: creating dcgui.spec config.status: creating dcgui.lsm config.status: creating dcgui/Makefile config.status: creating dcgui/docs/Makefile config.status: creating dcgui/docs/en/Makefile config.status: creating dcgui/res/Makefile config.status: creating config.h config.status: executing depfiles commands make all-recursive make[1]: Entering directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5' Making all in dcgui make[2]: Entering directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5/dcgui' Making all in docs make[3]: Entering directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5/dcgui/docs' Making all in en make[4]: Entering directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5/dcgui/docs/en' make[4]: Für das Ziel »all« ist nichts zu tun. make[4]: Leaving directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5/dcgui/docs/en' make[4]: Entering directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5/dcgui/docs' make[4]: Für das Ziel »all-am« ist nichts zu tun. make[4]: Leaving directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5/dcgui/docs' make[3]: Leaving directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5/dcgui/docs' Making all in res make[3]: Entering directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5/dcgui/res' make[3]: Für das Ziel »all« ist nichts zu tun. make[3]: Leaving directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5/dcgui/res' make[3]: Entering directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5/dcgui' /usr/qt/3/bin/uic -nounload -o DCDialogFileBrowser.h ./DCDialogFileBrowser.ui /usr/qt/3/bin/uic -nounload -o DCDialogUsersList.h ./DCDialogUsersList.ui /usr/qt/3/bin/uic -nounload -o DCDialogEditTransfer.h ./DCDialogEditTransfer.ui /usr/qt/3/bin/uic -nounload -o DCDialogSpy.h ./DCDialogSpy.ui /usr/qt/3/bin/uic -nounload -o DCDialogHubFilter.h ./DCDialogHubFilter.ui /usr/qt/3/bin/uic -nounload -o DCDialogHubProfile.h ./DCDialogHubProfile.ui /usr/qt/3/bin/uic -nounload -o DCDialogFileTransferInfo.h ./DCDialogFileTransferInfo.ui /usr/qt/3/bin/uic -nounload -o DCDialogSplash.h ./DCDialogSplash.ui /usr/qt/3/bin/uic -nounload -o DCDialogChat.h ./DCDialogChat.ui /usr/qt/3/bin/uic -nounload -o DCDialogEditServer.h ./DCDialogEditServer.ui /usr/qt/3/bin/uic -nounload -o DCDialogHubSearch.h ./DCDialogHubSearch.ui /usr/qt/3/bin/uic -nounload -o DCDialogBrowseFileTree.h ./DCDialogBrowseFileTree.ui /usr/qt/3/bin/uic -nounload -o DCDialogOptions.h ./DCDialogOptions.ui /usr/qt/3/bin/uic -nounload -o DCDialogTransfer.h ./DCDialogTransfer.ui /usr/qt/3/bin/uic -nounload -o DCDialogServerList.h ./DCDialogServerList.ui /usr/qt/3/bin/uic -nounload -o DCDialogGetURL.h ./DCDialogGetURL.ui /usr/qt/3/bin/uic -nounload -o DCDialogClient.h ./DCDialogClient.ui if g++ -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/qt/3/include -I/usr/X11R6/include -DQT_THREAD_SUPPORT -D_REENTRANT -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -O2 -march=athlon-xp -O3 -pipe -m3dnow -mmmx -msse -fomit-frame-pointer -mfpmath=sse -fno-exceptions -fno-check-new -I/usr/include -I/usr/include/libxml2 -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -O2 -march=athlon-xp -O3 -pipe -m3dnow -mmmx -msse -fomit-frame-pointer -mfpmath=sse -fno-exceptions -fno-check-new -MT dcevent.o -MD -MP -MF ".deps/dcevent.Tpo" \ -c -o dcevent.o `test -f 'dcevent.cpp' || echo './'`dcevent.cpp; \ then mv ".deps/dcevent.Tpo" ".deps/dcevent.Po"; \ else rm -f ".deps/dcevent.Tpo"; exit 1; \ fi dcevent.cpp: In constructor `DC_TrafficInfoEvent::DC_TrafficInfoEvent(QEvent::Type, DCMessageTraffic*)': dcevent.cpp:55: invalid use of undefined type `struct DCMessageTraffic' dcevent.h:35: forward declaration of `struct DCMessageTraffic' dcevent.cpp:57: invalid use of undefined type `struct DCMessageTraffic' dcevent.h:35: forward declaration of `struct DCMessageTraffic' dcevent.cpp: In destructor `virtual DC_TrafficInfoEvent::~DC_TrafficInfoEvent()': dcevent.cpp:63: invalid use of undefined type `struct DCMessageTraffic' dcevent.h:35: forward declaration of `struct DCMessageTraffic' make[3]: *** [dcevent.o] Fehler 1 make[3]: Leaving directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5/dcgui' make[2]: *** [all-recursive] Fehler 1 make[2]: Leaving directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5/dcgui' make[1]: *** [all-recursive] Fehler 1 make[1]: Leaving directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5' make: *** [all] Fehler 2 !!! ERROR: net-p2p/qt-dcgui-0.2.5 failed. !!! Function src_compile, Line 25, Exitcode 2 !!! (no error message) i also tried to compile the sources from http://dc.ketelhot.de by hand and it failed with the same error. i use kde-3.1 Reproducible: Always Steps to Reproduce: 1.emerge qt-dcgui 2. 3. Portage 2.0.46-r12 (default-x86-1.4, gcc-3.2.1, glibc-2.3.1-r2) ================================================================= System uname: 2.4.20-wolk4.0s-pre9 i686 AMD Athlon(tm) XP 1600+ GENTOO_MIRRORS="ftp://ftp.gtlib.cc.gatech.edu/pub/gentoo http://gentoo.oregonstate.edu/ http://www.ibiblio.org/pub/Linux/distributions/gentoo" CONFIG_PROTECT="/etc /var/qmail/control /usr/kde/2/share/config /usr/kde/3/share/config /usr/X11R6/lib/X11/xkb /usr/kde/3.1/share/config /usr/share/config" CONFIG_PROTECT_MASK="/etc/gconf /etc/env.d" PORTDIR="/usr/portage" DISTDIR="/usr/portage/distfiles" PKGDIR="/usr/portage/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR_OVERLAY="" USE="x86 libg++ mikmod xml2 tcltk libwww esd gtk motif X 3dnow arts -apm avi -berkdb cdr crypt cups tcpd dga dvd mmx encode ffmpeg gif gpm -gdbm -gnome imlib -java jpeg kde lcms mozilla mpeg ncurses nls oav -opengl oss oggvorbis pam pdflib perl pic python png -quicktime qt qtmt readline samba -slang spell sdl slp sse ssl -svga truetype tetex tiff wmf xmms xface xv zlib" COMPILER="gcc3" CHOST="i686-pc-linux-gnu" CFLAGS="-march=athlon-xp -O3 -pipe -m3dnow -mmmx -msse -fomit-frame-pointer -mfpmath=sse" CXXFLAGS="-march=athlon-xp -O3 -pipe -m3dnow -mmmx -msse -fomit-frame-pointer -mfpmath=sse" ACCEPT_KEYWORDS="x86" MAKEOPTS="-j2" AUTOCLEAN="yes" SYNC="rsync://rsync.gentoo.org/gentoo-portage" FEATURES="sandbox ccache buildpkg"
what version of qt ?
qt-3.1.0-r3
i am still unsure if it wouldn't be better to post this on http://dc.ketelhot.de, as in my first comment i wrote that building qt-dcgui fails even when i try to emerge it manually.
nah, leave it here ... what if you do this: env CFLAGS="" CXXFLAGS="" LANG="" emerge qt-dcgui
nope, output is this: if g++ -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/qt/3/include -I/usr/X11R6/include -DQT_THREAD_SUPPORT -D_REENTRANT -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -O2 -fno-exceptions -fno-check-new -I/usr/include -I/usr/include/libxml2 -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -O2 -fno-exceptions -fno-check-new -MT dcevent.o -MD -MP -MF ".deps/dcevent.Tpo" \ -c -o dcevent.o `test -f 'dcevent.cpp' || echo './'`dcevent.cpp; \ then mv ".deps/dcevent.Tpo" ".deps/dcevent.Po"; \ else rm -f ".deps/dcevent.Tpo"; exit 1; \ fi dcevent.cpp: In constructor `DC_TrafficInfoEvent::DC_TrafficInfoEvent(QEvent::Type, DCMessageTraffic*)': dcevent.cpp:55: invalid use of undefined type `struct DCMessageTraffic' dcevent.h:35: forward declaration of `struct DCMessageTraffic' dcevent.cpp:57: invalid use of undefined type `struct DCMessageTraffic' dcevent.h:35: forward declaration of `struct DCMessageTraffic' dcevent.cpp: In destructor `virtual DC_TrafficInfoEvent::~DC_TrafficInfoEvent()': dcevent.cpp:63: invalid use of undefined type `struct DCMessageTraffic' dcevent.h:35: forward declaration of `struct DCMessageTraffic' make[3]: *** [dcevent.o] Error 1 make[3]: Leaving directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5/dcgui' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5/dcgui' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/qt-dcgui-0.2.5/work/dcgui-0.2.5' make: *** [all] Error 2 !!! ERROR: net-p2p/qt-dcgui-0.2.5 failed. !!! Function src_compile, Line 25, Exitcode 2 !!! (no error message) btw, did you really mean me to pass LANG=""?
does 0.2.6 fail for you too ?
re-open if 0.2.6 still fails ... also, was there ever a version that worked for you ?
still no feedback
...
oh well re-open if you're still having troubles