$ sensors it87-isa-0290 Adapter: ISA adapter VCore 1: +1.74 V (min = +4.08 V, max = +4.02 V) ALARM VCore 2: +2.48 V (min = +3.95 V, max = +4.08 V) ALARM +3.3V: +3.15 V (min = +4.08 V, max = +4.08 V) ALARM +5V: +4.89 V (min = +6.85 V, max = +6.85 V) ALARM +12V: +12.93 V (min = +16.32 V, max = +16.32 V) ALARM -12V: -1.47 V (min = +3.93 V, max = +2.95 V) ALARM -5V: -10.18 V (min = +4.03 V, max = +1.81 V) ALARM Stdby: +4.97 V (min = +6.42 V, max = +6.85 V) ALARM VBat: +3.06 V fan1: 0 RPM (min = 0 RPM, div = 128) fan2: 0 RPM (min = 0 RPM, div = 128) fan3: 0 RPM (min = 0 RPM, div = 2) M/B Temp: +30
$ sensors it87-isa-0290 Adapter: ISA adapter VCore 1: +1.74 V (min = +4.08 V, max = +4.02 V) ALARM VCore 2: +2.48 V (min = +3.95 V, max = +4.08 V) ALARM +3.3V: +3.15 V (min = +4.08 V, max = +4.08 V) ALARM +5V: +4.89 V (min = +6.85 V, max = +6.85 V) ALARM +12V: +12.93 V (min = +16.32 V, max = +16.32 V) ALARM -12V: -1.47 V (min = +3.93 V, max = +2.95 V) ALARM -5V: -10.18 V (min = +4.03 V, max = +1.81 V) ALARM Stdby: +4.97 V (min = +6.42 V, max = +6.85 V) ALARM VBat: +3.06 V fan1: 0 RPM (min = 0 RPM, div = 128) fan2: 0 RPM (min = 0 RPM, div = 128) fan3: 0 RPM (min = 0 RPM, div = 2) M/B Temp: +30°C (low = -1°C, high = -1°C) sensor = thermistor CPU Temp: +33°C (low = -1°C, high = -83°C) sensor = thermistor Temp3: +51°C (low = -1°C, high = -19°C) sensor = thermistor only telling about worst stupidity. if my -12 were REALLY -1.47, I dont think my system would work at all. Using (min = +3.93 V, max = +2.95 V) is wrong sign, and using stupid values to compare -12 with ... please check all constants and correction factors. Its ok about my fans. I have no module; every thing is hard linked in kernel. lm_sensors-2.10.0
this is problem to me because system log messages got loads of unrevealant ALARMS about voltages and temperatures.
You did run 'sensors -s' yes? (it's also run by the init script). If you did, please read /etc/sensors.conf. Depending on your motherboard, you may need to uncomment an alternative section in that file. Lastly, if none of that works, submit a patch for sensors.conf, and tell us what motherboard you have.
(In reply to comment #2) > You did run 'sensors -s' yes? (it's also run by the init script). > > If you did, please read /etc/sensors.conf. I had read about all that yesterday, and wrote it in my todolist, but forgot it today. PEBCAK. Yes there is a note for K7S5A: 2 lines should be commented and 2 other ones uncommented. Actual alarms still strange: VCore 1: +1.74 V (min = +1.42 V, max = +1.57 V) ALARM +12V: +12.86 V (min = +11.39 V, max = +12.61 V) ALARM -12V: -12.15 V (min = -12.61 V, max = -11.40 V) ALARM -5V: -4.57 V (min = -5.29 V, max = -4.75 V) ALARM I know my supply is cheap ... but isnt -12.21 between -12.61 and -11.40 ? I dont think you are to fix this ... resolving WONTFIX.
