I'm installing from the LiveCD 2006.0. From the GUI, I started with the graphical installer which ran into trouble. So I switched to the command line installer and continued using the installprofile.xml (from the GLI) as my base. After several hours and emerging multiple packages the installer displayed the following: There was an Exception received during the install that is outside of the normal install errors. This is a bad thing. The error was:EmergePackageError :FATAL: emerge: Could not emerge gnome-extra/gcalctool-5.6.31! Please submit a bug report (after searching to make sure it's not a known issue and verifying you didn't do something stupid) with the contents of /var/log/install.log and /tmp/installprofile.xml and the version of the installer you used. Below are the contents of files /var/log/installer.log.failed, /tmp/installprofile.xml, and the output of "emerge --info" ################################################################################ #### /var/log/installer.log.failed #### GLI: April 22 2006 13:44:55 - Setting root password. GLI: April 22 2006 13:44:56 - Portmap started. GLI: April 22 2006 13:44:56 - Completed pre_install steps GLI: April 22 2006 13:45:13 - partitioning: Processing /dev/hda... GLI: April 22 2006 13:45:13 - Partitioning: Second pass... GLI: April 22 2006 13:45:13 - Partitioning: Third pass....creating partitions GLI: April 22 2006 13:45:13 - Drive has 58633344 sectors GLI: April 22 2006 13:45:13 - Partition 1 has 100MB GLI: April 22 2006 13:45:13 - Start sector calculated to be 0 GLI: April 22 2006 13:45:13 - End sector calculated to be 204800 GLI: April 22 2006 13:45:13 - Adding primary partition 1 from 0 to 204800 GLI: April 22 2006 13:45:14 - Formatting partition 1 as ext2 with: mkfs.ext2 /dev/hda1 GLI: April 22 2006 13:45:15 - Partition 2 has 498MB GLI: April 22 2006 13:45:15 - Start sector calculated to be 204801 GLI: April 22 2006 13:45:15 - End sector calculated to be 1224705 GLI: April 22 2006 13:45:15 - Adding primary partition 2 from 204801 to 1224705 GLI: April 22 2006 13:45:16 - Formatting partition 2 as linux-swap with: mkswap /dev/hda2 GLI: April 22 2006 13:45:16 - Partition 3 has 28030MB GLI: April 22 2006 13:45:16 - Start sector calculated to be 1224706 GLI: April 22 2006 13:45:16 - End sector calculated to be 58630146 GLI: April 22 2006 13:45:16 - Adding primary partition 3 from 1224706 to 58630146 GLI: April 22 2006 13:45:17 - Formatting partition 3 as ext3 with: mkfs.ext3 /dev/hda3 GLI: April 22 2006 13:45:54 - Mounted mountpoint: / GLI: April 22 2006 13:45:56 - Created mountpoint /boot GLI: April 22 2006 13:45:56 - Mounted mountpoint: /boot GLI: April 22 2006 14:36:41 - Stage3 was generated successfully GLI: April 22 2006 14:36:46 - fstab configured. GLI: April 22 2006 14:36:47 - Edited Config file /mnt/gentoo/etc/rc.conf GLI: April 22 2006 14:36:47 - Edited Config file /mnt/gentoo/etc/conf.d/clock GLI: April 22 2006 14:36:47 - Edited Config file /mnt/gentoo/etc/conf.d/keymaps GLI: April 22 2006 14:36:47 - Edited Config file /mnt/gentoo/etc/make.conf GLI: April 22 2006 14:36:47 - Config files updated using etc-update. make.conf/fstab/rc.conf restored. GLI: April 22 2006 14:36:47 - Edited Config file /mnt/gentoo/etc/make.conf GLI: April 22 2006 14:36:47 - Edited Config file /mnt/gentoo/etc/make.conf GLI: April 22 2006 14:36:47 - Edited Config file /mnt/gentoo/etc/make.conf GLI: April 22 2006 14:36:47 - Edited Config file /mnt/gentoo/etc/make.conf GLI: April 22 2006 14:36:47 - Edited Config file /mnt/gentoo/etc/make.conf GLI: April 22 2006 14:36:47 - Edited Config file /mnt/gentoo/etc/make.conf GLI: April 22 2006 14:36:47 - Make.conf configured GLI: April 22 2006 14:36:49 - Chroot environment ready. GLI: April 22 2006 15:10:49 - Portage tree sync'd GLI: April 22 2006 15:10:51 - Root Password set on the new system. GLI: April 22 2006 15:10:51 - Edited Config file /mnt/gentoo/etc/conf.d/clock GLI: April 22 2006 15:10:51 - Timezone set. GLI: April 22 2006 15:10:52 - Starting emerge_kernel GLI: April 22 2006 15:13:01 - Coldplug emerged. Now they should be added to the boot runlevel. GLI: April 22 2006 15:13:01 - Added coldplug to runlevel boot GLI: April 22 2006 15:13:02 - -- MARK -- GLI: April 22 2006 15:13:02 - Starting build_kernel GLI: April 22 2006 15:15:26 - distcc emerged. GLI: April 22 2006 15:16:19 - Added syslog-ng to runlevel default GLI: April 22 2006 15:16:19 - Logging daemon installed: syslog-ng GLI: April 22 2006 15:17:55 - Added vixie-cron to runlevel default GLI: April 22 2006 15:17:55 - Cron daemon installed and configured: vixie-cron GLI: April 22 2006 15:17:55 - Edited Config file /mnt/gentoo/etc/conf.d/hostname GLI: April 22 2006 15:17:55 - Edited Config file /mnt/gentoo/etc/conf.d/domainname GLI: April 22 2006 15:17:55 - Added domainname to runlevel default GLI: April 22 2006 15:17:55 - Edited Config file /mnt/gentoo/etc/hosts GLI: April 22 2006 15:17:55 - Edited Config file /mnt/gentoo/etc/conf.d/net GLI: April 22 2006 15:17:56 - Added net.eth0 to runlevel default GLI: April 22 2006 15:17:56 - Edited Config file /mnt/gentoo/etc/conf.d/net GLI: April 22 2006 15:18:31 - Emerged the selected bootloader. GLI: April 22 2006 15:18:31 - Found a mbr device: /dev/hda GLI: April 22 2006 15:18:32 - Output of Kernel Names: /mnt/gentoo/boot/kernel-genkernel-x86-2.6.15-gentoo-r5 GLI: April 22 2006 15:18:32 - Output of Initrd Names: /mnt/gentoo/boot/initramfs-genkernel-x86-2.6.15-gentoo-r5 GLI: April 22 2006 15:18:32 - Bootloader: the three information gathering commands have been run GLI: April 22 2006 15:18:32 - Grub installed and configured. Contents of grub.conf: default 0 timeout 30 splashimage=(hd0,0)/grub/splash.xpm.gz title=Gentoo Linux root (hd0,0) kernel /kernel-genkernel-x86-2.6.15-gentoo-r5 root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda3 initrd /initramfs-genkernel-x86-2.6.15-gentoo-r5 GLI: April 22 2006 15:18:32 - Grub has not yet been run. If a normal install, it will now be run. GLI: April 22 2006 15:18:32 - Found a mbr device: /dev/hda GLI: April 22 2006 15:18:32 - Bootloader: grub has been installed! GLI: April 22 2006 15:18:41 - fstab configured. GLI: April 22 2006 15:18:41 - Edited Config file /mnt/gentoo/etc/rc.conf GLI: April 22 2006 15:18:41 - Edited Config file /mnt/gentoo/etc/conf.d/clock GLI: April 22 2006 15:18:41 - Edited Config file /mnt/gentoo/etc/conf.d/keymaps GLI: April 22 2006 15:18:41 - Edited Config file /mnt/gentoo/etc/make.conf GLI: April 22 2006 15:18:41 - Config files updated using etc-update. make.conf/fstab/rc.conf restored. GLI: April 22 2006 15:18:42 - ERROR! : Failure to add user relson GLI: April 22 2006 17:49:26 - Exception received during 'Installing additional packages.': EmergePackageError :FATAL: emerge: Could not emerge gnome-extra/gcalctool-5.6.31! GLI: April 22 2006 17:49:26 - Traceback (most recent call last): GLI: April 22 2006 17:49:26 - File "/opt/installer/GLIClientController.py", line 165, in run self._install_steps[self._install_step]['function']() GLI: April 22 2006 17:49:26 - File "/opt/installer/GLIArchitectureTemplate.py", line 355, in install_packages self._portage.emerge(installpackages) GLI: April 22 2006 17:49:26 - File "/opt/installer/GLIPortage.py", line 222, in emerge raise GLIException("EmergePackageError", "fatal", "emerge", "Could not emerge " + pkg + "!") GLI: April 22 2006 17:49:26 - GLIException: EmergePackageError :FATAL: emerge: Could not emerge gnome-extra/gcalctool-5.6.31! ################################################################################ #### Contents of installprofile.xml #### <?xml version="1.0" ?> <gli-profile> <kernel-build-method> genkernel </kernel-build-method> <cron-daemon> vixie-cron </cron-daemon> <domainname> osagesoftware.com </domainname> <portage-snapshot> file:///mnt/cdrom/snapshots/portage-20060123.tar.bz2 </portage-snapshot> <kernel-source> livecd-kernel </kernel-source> <install-pcmcia-cs> False </install-pcmcia-cs> <time-zone> America/New_York </time-zone> <install-distcc> True </install-distcc> <boot-device> /dev/hda </boot-device> <dynamic-stage3> True </dynamic-stage3> <kernel-bootsplash> False </kernel-bootsplash> <bootloader-mbr> True </bootloader-mbr> <hostname> george </hostname> <bootloader-kernel-args/> <post-install-script-uri/> <nisdomainname/> <install-stage> 3 </install-stage> <ftp-proxy/> <rsync-proxy/> <stage-tarball/> <bootloader> grub </bootloader> <root-pass-hash> $1$4L3uW0JW$WyBEVMQEteoizuDfaSZHT0 </root-pass-hash> <http-proxy/> <mta/> <grp-install> True </grp-install> <logging-daemon> syslog-ng </logging-daemon> <kernel-config/> <portage-tree-sync> sync </portage-tree-sync> <kernel-initrd> True </kernel-initrd> <install-rp-pppoe> False </install-rp-pppoe> <default-gateway interface="eth0"> 192.168.1.2 </default-gateway> <dns-servers> 192.168.1.2 </dns-servers> <install-packages> blackbox gnome xorg-x11 enlightenment chkrootkit screen netcat traceroute slocate logrotate emacs ntp evolution mozilla-firefox </install-packages> <network-interfaces> <device broadcast="192.168.1.255" ip="192.168.1.30" netmask="255.255.255.0"> eth0 </device> </network-interfaces> <network-mounts/> <partitions> <device devnode="/dev/hda" disklabel="msdos"> <partition format="True" mb="100" minor="1" mkfsopts="" mountopts="" mountpoint="/boot" origminor="0" resized="False" type="ext2"/> <partition format="True" mb="498" minor="2" mkfsopts="" mountopts="" mountpoint="" origminor="0" resized="False" type="linux-swap"/> <partition format="True" mb="28030" minor="3" mkfsopts="" mountopts="" mountpoint="/" origminor="0" resized="False" type="ext3"/> </device> </partitions> <services> local,sshd,xfs,xdm </services> <users> <user comment="" groups="root, wheel" hash="$1$kGAJizZT$eDQhdn/PBPRaS6ReOMSgo0" homedir="/home/relson" shell="bash"> relson </user> </users> <etc-files> <file name="rc.conf"> <entry name="DISPLAYMANAGER"> entrance </entry> <entry name="XSESSION"> Gnome </entry> <entry name="EDITOR"> /bin/nano </entry> </file> <file name="conf.d/clock"> <entry name="CLOCK"> local </entry> </file> <file name="conf.d/keymaps"> <entry name="KEYMAP"> us </entry> <entry name="SET_WINDOWSKEYS"> Yes </entry> </file> <file name="make.conf"> <entry name="MAKEOPTS"/> <entry name="USE"> X alsa apache2 apm arts audiofile avi berkdb bitmap-fonts bzip2 cdr cli crypt ctype cups dba eds elibc_glibc emboss encode esd ethereal exif expat fam fastbuild foomaticdb force-cgi-redirect fortran ftp gd gdbm gif glut gmp gnome gpm gstreamer gtk gtk2 gtkhtml guile idn imlib ipv6 jpeg kde kernel_linux lcms libg++ libwww mad memlimit mikmod mng motif mozilla mp3 mpeg ncurses nls nptl ogg opengl oss pam pcre pdflib perl png posix python qt quicktime readline samba sdl session simplexml slang soap sockets spell spl ssl tcltk tcpd tiff tokenizer truetype truetype-fonts type1-fonts udev userland_GNU vorbis x86 xml xml2 xmms xsl xv zlib </entry> <entry name="FEATURES"> distcc </entry> <entry name="ACCEPT_KEYWORDS"/> <entry name="DISTCC_HOSTS"> localhost </entry> <entry name="CFLAGS"> -march=i686 -O2 -pipe </entry> </file> </etc-files> </gli-profile> ################################################################################ #### output of "emerge --info" #### Gentoo Base System version 1.6.14 Portage 2.0.54 (default-linux/x86/2006.0, gcc-3.4.4, glibc-2.3.5-r2, 2.6.15-gentoo-r5 i686) ================================================================= System uname: 2.6.15-gentoo-r5 i686 Pentium III (Katmai) distcc 2.18.3 i686-pc-linux-gnu (protocols 1 and 2) (default port 3632) [disabled] ccache version 2.3 [disabled] dev-lang/python: 2.4.2 sys-apps/sandbox: 1.2.12 sys-devel/autoconf: 2.13, 2.59-r6 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r1 sys-devel/binutils: 2.16.1 sys-devel/libtool: 1.5.22 virtual/os-headers: 2.6.11-r2 ACCEPT_KEYWORDS="x86" AUTOCLEAN="yes" CBUILD="i686-pc-linux-gnu" CFLAGS="-O2 -march=i686 -pipe" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3/share/config /usr/share/config /var/qmail/control" CONFIG_PROTECT_MASK="/etc/gconf /etc/env.d" CXXFLAGS="-O2 -march=i686 -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="autoconfig distlocks sandbox sfperms strict" GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/linux/distributions/gentoo" PKGDIR="/usr/portage/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" SYNC="rsync://rsync.gentoo.org/gentoo-portage" USE="x86 X alsa apache2 apm arts audiofile avi berkdb bitmap-fonts bzip2 cdr cli crypt ctype cups dba eds emboss encode esd ethereal exif expat fam fastbuild foomaticdb force-cgi-redirect fortran ftp gd gdbm gif glut gmp gnome gpm gstreamer gtk gtk2 gtkhtml guile idn imlib ipv6 jpeg kde lcms libg++ libwww mad memlimit mikmod mng motif mozilla mp3 mpeg ncurses nls nptl ogg opengl oss pam pcre pdflib perl png posix python qt quicktime readline samba sdl session simplexml slang soap sockets spell spl ssl tcltk tcpd tiff tokenizer truetype truetype-fonts type1-fonts udev vorbis xml xml2 xmms xsl xv zlib userland_GNU kernel_linux elibc_glibc" Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS, MAKEOPTS, PORTDIR_OVERLAY
Emerge errors are not a problem with the installer. Please change your USE flags or choose less additional packages to install next time. Since this error occurred in the installation of extra packages step, you can reboot into your new system and emerge the packages, and add the user following the handbook.