installer.log.failed: GLI: April 22 2006 11:37:02 - Setting root password. GLI: April 22 2006 11:37:02 - Livecd root password set. GLI: April 22 2006 11:37:04 - Portmap started. GLI: April 22 2006 11:37:04 - Completed pre_install steps GLI: April 22 2006 11:45:18 - partitioning: Processing /dev/hde... GLI: April 22 2006 11:45:18 - Partition 2 has origminor 2...saving start sector 208845 and end sector 2313359 GLI: April 22 2006 11:45:18 - Deleting old minor 2 to be recreated later GLI: April 22 2006 11:45:18 - Partitioning: Second pass... GLI: April 22 2006 11:45:18 - Partitioning: Third pass....creating partitions GLI: April 22 2006 11:45:18 - Drive has 80418240 sectors GLI: April 22 2006 11:45:18 - Partition 1 has 101MB GLI: April 22 2006 11:45:18 - Start sector calculated to be 0 GLI: April 22 2006 11:45:18 - End sector calculated to be 206848 GLI: April 22 2006 11:45:18 - Adding primary partition 1 from 0 to 206848 GLI: April 22 2006 11:45:19 - Formatting partition 1 as ext3 with: mkfs.ext3 /dev/hde1 GLI: April 22 2006 11:45:22 - Partition 2 has 1027MB GLI: April 22 2006 11:45:22 - Old start sector 208845 retrieved GLI: April 22 2006 11:45:22 - Retrieved start sector is not the same as the calculated next start sector GLI: April 22 2006 11:45:22 - Old end sector 2313359 retrieved GLI: April 22 2006 11:45:22 - Adding primary partition 2 from 208845 to 2313359 GLI: April 22 2006 11:45:22 - Partition 3 has 38130MB GLI: April 22 2006 11:45:22 - Start sector calculated to be 2313360 GLI: April 22 2006 11:45:22 - End sector calculated to be 80403600 GLI: April 22 2006 11:45:22 - Adding primary partition 3 from 2313360 to 80403600 GLI: April 22 2006 11:45:23 - Formatting partition 3 as reiserfs with: mkfs.reiserfs -f /dev/hde3 GLI: April 22 2006 11:45:27 - partitioning: Processing /dev/hda... GLI: April 22 2006 11:45:27 - Partition 1 has origminor 1...saving start sector 63 and end sector 25173854 GLI: April 22 2006 11:45:27 - Partition 2 has origminor 2...saving start sector 25173855 and end sector 276848144 GLI: April 22 2006 11:45:27 - Deleting old minor 1 to be recreated later GLI: April 22 2006 11:45:27 - Deleting old minor 2 to be recreated later GLI: April 22 2006 11:45:27 - Partitioning: Second pass... GLI: April 22 2006 11:45:27 - Partitioning: Third pass....creating partitions GLI: April 22 2006 11:45:27 - Drive has 488397168 sectors GLI: April 22 2006 11:45:27 - Partition 1 has 12291MB GLI: April 22 2006 11:45:27 - Old start sector 63 retrieved GLI: April 22 2006 11:45:27 - Retrieved start sector is not the same as the calculated next start sector GLI: April 22 2006 11:45:27 - Old end sector 25173854 retrieved GLI: April 22 2006 11:45:27 - Adding primary partition 1 from 63 to 25173854 GLI: April 22 2006 11:45:27 - Partition 2 has 122887MB GLI: April 22 2006 11:45:27 - Old start sector 25173855 retrieved GLI: April 22 2006 11:45:27 - Old end sector 276848144 retrieved GLI: April 22 2006 11:45:27 - Adding primary partition 2 from 25173855 to 276848144 GLI: April 22 2006 11:45:27 - Partition 2.03125 has 103292MB GLI: April 22 2006 11:45:27 - Start sector calculated to be 276848145 GLI: April 22 2006 11:45:27 - End sector calculated to be 488390161 GLI: April 22 2006 11:45:36 - Mounted mountpoint: / GLI: April 22 2006 11:45:36 - Created mountpoint /boot GLI: April 22 2006 11:45:37 - Mounted mountpoint: /boot GLI: April 22 2006 11:45:37 - Fetching and unpacking tarball: http://mirror.gentoo.no/releases/x86/2006.0/stages/stage1-x86-2006.0.tar.bz2 GLI: April 22 2006 11:47:50 - http://mirror.gentoo.no/releases/x86/2006.0/stages/stage1-x86-2006.0.tar.bz2 was fetched and unpacked. GLI: April 22 2006 11:47:55 - fstab configured. GLI: April 22 2006 11:47:55 - Edited Config file /mnt/gentoo/etc/rc.conf GLI: April 22 2006 11:47:55 - Edited Config file /mnt/gentoo/etc/conf.d/clock GLI: April 22 2006 11:47:55 - Edited Config file /mnt/gentoo/etc/conf.d/keymaps GLI: April 22 2006 11:47:55 - Edited Config file /mnt/gentoo/etc/make.conf GLI: April 22 2006 11:47:55 - Config files updated using etc-update. make.conf/fstab/rc.conf restored. GLI: April 22 2006 11:47:55 - Edited Config file /mnt/gentoo/etc/make.conf GLI: April 22 2006 11:47:55 - Edited Config file /mnt/gentoo/etc/make.conf GLI: April 22 2006 11:47:55 - Edited Config file /mnt/gentoo/etc/make.conf GLI: April 22 2006 11:47:55 - Edited Config file /mnt/gentoo/etc/make.conf GLI: April 22 2006 11:47:55 - Edited Config file /mnt/gentoo/etc/make.conf GLI: April 22 2006 11:47:55 - Edited Config file /mnt/gentoo/etc/make.conf GLI: April 22 2006 11:47:55 - Make.conf configured GLI: April 22 2006 11:47:56 - Chroot environment ready. GLI: April 22 2006 12:11:06 - Portage tree sync'd GLI: April 22 2006 12:11:06 - -- MARK -- GLI: April 22 2006 12:11:06 - Starting bootstrap. GLI: April 22 2006 15:59:20 - Bootstrap complete. GLI: April 22 2006 15:59:20 - -- MARK -- GLI: April 22 2006 15:59:20 - Starting emerge system. GLI: April 22 2006 15:59:28 - Calling emerge: emerge -k --emptytree system GLI: April 22 2006 17:45:17 - Exception received during 'Performing 'emerge system'': Stage2Error :FATAL: stage2: Building the system failed! GLI: April 22 2006 17:45:17 - Traceback (most recent call last): GLI: April 22 2006 17:45:17 - File "/opt/installer/GLIClientController.py", line 165, in run self._install_steps[self._install_step]['function']() GLI: April 22 2006 17:45:17 - File "/opt/installer/GLIArchitectureTemplate.py", line 238, in stage2 raise GLIException("Stage2Error", 'fatal','stage2', "Building the system failed!") GLI: April 22 2006 17:45:17 - GLIException: Stage2Error :FATAL: stage2: Building the system failed! Regards Chris
Your /tmp/compile_output.log should show you the error message. Nothing we could do without it.
make: Leaving directory `/var/tmp/portage/file-4.13/work/file-4.13/magic' running build running build_ext building 'magic' extension creating build creating build/temp.linux-i686-2.4 i386-pc-linux-gnu-gcc -pthread -fno-strict-aliasing -DNDEBUG -march=pentium3m -O2 -pipe -fPIC -I./ -I../ -I../src -I/usr/include/ -I/usr/include/python2.4 -c py_magic.c -o build/temp.linux-i686-2.4/py_magic.o unable to execute i386-pc-linux-gnu-gcc: No such file or directory error: command 'i386-pc-linux-gnu-gcc' failed with exit status 1 !!! ERROR: sys-apps/file-4.13 failed. !!! Function distutils_src_compile, Line 35, Exitcode 1 !!! compilation failed !!! If you need support, post the topmost build error, NOT this status message. Did you change your CHOST or what?
CHOST has not been change it is still "i686-pc-linux-gnu". If you check the compile_output.log, during bootstrip process the i386-pc-linux-gcc-3.4.4 exits. After build i686-pc-linux-gnu-gcc-3.4.5 then the build procees unmerge the i386 version of gcc and some of the subsequency make still ask for i386 version of gcc. See extact of compile_output.log: >>> sys-devel/gcc-3.4.5-r1 merged. sys-devel/gcc selected: 3.4.4-r1 protected: 3.4.5-r1 omitted: none >>> 'Selected' packages are slated for removal. >>> 'Protected' and 'omitted' packages will not be removed. >>> Waiting 5 seconds before starting... >>> (Control-C to abort)... >>> Unmerging in: 5 4 3 2 1 >>> Unmerging sys-devel/gcc-3.4.4-r1... No package files given... Grabbing a set. <<< obj /usr/libexec/gcc/i386-pc-linux-gnu/3.4.4/collect2 <<< obj /usr/libexec/gcc/i386-pc-linux-gnu/3.4.4/cc1 <<< obj /usr/lib/gcc/i386-pc-linux-gnu/3.4.4/vanilla.specs <<< obj /usr/lib/gcc/i386-pc-linux-gnu/3.4.4/specs <<< obj /usr/lib/gcc/i386-pc-linux-gnu/3.4.4/libgcov.a <<< obj /usr/lib/gcc/i386-pc-linux-gnu/3.4.4/libgcc_s.so.1 <<< obj /usr/lib/gcc/i386-pc-linux-gnu/3.4.4/libgcc_eh.a <<< obj /usr/lib/gcc/i386-pc-linux-gnu/3.4.4/libgcc.a Regards Chris
I had supplied more information on 23rd-April, as the Status being set to RESOLVED nobody has look into this issue again. Regards Chris
Sigh; how about dropping support for these stages from livecd? Does more harm than good...
Well, this is an installer bug, so it doesn't belong to release until it becomes the default, all around.
Compilation failures are not installer bugs.
it isnt a bug in file sounds like the installer doesnt fix the host env after changing toolchains
ZOMG...
This *may* have been caused by the installer not running 'env-update && source /etc/profile' before running 'emerge -e system'. Try updating to the CVS installer by opening a terminal and running '/opt/installer/misc/updategtkfe'. Run your same install again. Please reopen this bug if you run into the problem again.
forgot to close :)
