Every time that any error occurs with my system, i get a read only file system error. in this instance, i did a emerge gcc-hppa64, and it errored out. afterwords, i went ahead with the normal gcc i have, and did an emerge -uDv (after a SUCCESSFUL emerge --sync, and the first two of 3 gcc-hppa64 packages compiled..) heres what i got. sorry, dont know enough to say more. emerge -uDv world Calculating world dependencies ...done! Failed to open file for writedict(): //var/lib/portage/world >>> emerge (1 of 66) sys-devel/gnuconfig-20060227 to / Traceback (most recent call last): File "/usr/bin/emerge", line 3200, in ? mydepgraph.merge(mydepgraph.altlist()) File "/usr/bin/emerge", line 1904, in merge retval=portage.doebuild(y,"clean",myroot,self.pkgsettings,edebug,cleanup=1) File "/usr/lib/portage/pym/portage.py", line 2458, in doebuild os.chown(mysettings["BUILD_PREFIX"],portage_uid,portage_gid) OSError: [Errno 30] Read-only file system: '/var/tmp/portage'
Please include the output of: emerge info cat /proc/mounts ls -ld /var /var/tmp /var/tmp/portage
anything useful in `dmesg` ?
(In reply to comment #2) > anything useful in `dmesg` ? > got it here. sorry to sound like a moron on the initial question for the bug. it looks like something is making /dev/sda4 freak out. it fsck's clean, and comes up fine, (i am on the live cd in a chrooted environment to my box) Heres dmesg: (chroot) livecd / # dmesg Linux version 2.6.12.2-pa2-livecd64 (root@hake) (gcc version 3.3.2 (Gentoo Linux 3.3.2-r1)) #1 Thu Jul 28 18:44:34 UTC 2005 FP[0] enabled: Rev 1 Model 16 The 64-bit Kernel has started... Initialized PDC Console for debugging. Determining PDC firmware type: 64 bit PAT. model 00005d50 00000491 00000000 00000001 59c01506 100000f0 00000008 000000b2 000000b2 vers 00000301 CPUID vers 18 rev 11 (0x0000024b) capabilities 0x1 model 9000/800/A500-5X Total Memory: 2048 MB initrd: 4ff09000-4ffef455 initrd: reserving 3ff09000-3ffef455 (mem_max 80000000) On node 0 totalpages: 524288 DMA zone: 524288 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: TERM=linux root=/dev/ram0 init=/linuxrc cdroot looptype=squashfs loop=/livecd.squashfs hda=scsi console=ttyS0 palo_kernel=0/vmlinux64 ide_setup: hda=scsi PID hash table entries: 4096 (order: 12, 131072 bytes) Console: colour dummy device 160x64 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Memory: 2097152k available Calibrating delay loop... 1093.63 BogoMIPS (lpj=546816) Mount-cache hash table entries: 256 checking if image is initramfs... it is NET: Registered protocol family 16 EISA bus registered Searching for devices... Found devices: 1. Crescendo 550 at 0xfffffffffffa0000 [160] { 0, 0x0, 0x5d5, 0x00004 } 2. Crescendo 550 at 0xfffffffffffa2000 [162] { 0, 0x0, 0x5d5, 0x00004 } 3. Memory at 0xfffffffffed08000 [8] { 1, 0x0, 0x09b, 0x00009 } 4. Astro BC Runway Port at 0xfffffffffed00000 [0] { 12, 0x0, 0x582, 0x0000b } 5. Elroy PCI Bridge at 0xfffffffffed30000 [0/0] { 13, 0x0, 0x782, 0x0000a } 6. Elroy PCI Bridge at 0xfffffffffed34000 [0/2] { 13, 0x0, 0x782, 0x0000a } 7. Elroy PCI Bridge at 0xfffffffffed38000 [0/4] { 13, 0x0, 0x782, 0x0000a } 8. Elroy PCI Bridge at 0xfffffffffed3c000 [0/6] { 13, 0x0, 0x782, 0x0000a } Enabling PDC_PAT chassis codes support. CONFIG_SMP=n ignoring additional CPUs CPU: probe of 162 failed with error 1 CPU(s): 1 x PA8600 (PCX-W+) at 550.000000 MHz Whole cache flush 345687 cycles, flushing 277048816 bytes 44205216 cycles Setting cache flush threshold to 210f40 (1 CPUs online) SBA found Astro 2.1 at 0xfffffffffed00000 LBA version TR4.0 (0x5) found at 0xfffffffffed30000 LBA version TR4.0 (0x5) found at 0xfffffffffed34000 LBA version TR4.0 (0x5) found at 0xfffffffffed38000 LBA version TR4.0 (0x5) found at 0xfffffffffed3c000 SCSI subsystem initialized usbcore: registered new driver hub unwind_init: start = 0x105816c0, end = 0x105b6290, entries = 13501 Performance monitoring counters enabled for Crescendo 550 Squashfs 2.1 (released 2004/12/10) (C) 2002-2004 Phillip Lougher devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API PDC Stable Storage facility v0.09 Soft power switch support not available. STI GSC/PCI core graphics driver Version 0.9a Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 13 ports, IRQ sharing enabled ttyS0 at MMIO 0xfffffffff8000000 (irq = 69) is a 16550A ttyS1 at MMIO 0xfffffffff8000008 (irq = 69) is a 16550A ttyS2 at MMIO 0xfffffffff8000010 (irq = 69) is a 16550A ttyS3 at MMIO 0xfffffffff8006000 (irq = 70) is a 16550A ttyS4 at MMIO 0xfffffffff8006008 (irq = 70) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx sym0: <896> rev 0x7 at pci 0000:00:01.0 irq 66 sym0: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking sym0: SCSI BUS has been reset. scsi0 : sym-2.2.1 Vendor: HP 18.2G Model: ST318406LC Rev: HP03 Type: Direct-Access ANSI SCSI revision: 02 target0:0:8: tagged command queuing enabled, command queue depth 16. target0:0:8: Beginning Domain Validation target0:0:8: asynchronous. WIDTH IS 1 target0:0:8: wide asynchronous. target0:0:8: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 31) target0:0:8: Ending Domain Validation sym1: <896> rev 0x7 at pci 0000:00:01.1 irq 67 sym1: PA-RISC Firmware, ID 15, Fast-40, SE, parity checking sym1: SCSI BUS has been reset. sym1: SCSI BUS mode change from SE to SE. sym1: SCSI BUS has been reset. scsi1 : sym-2.2.1 sym2: <875> rev 0x14 at pci 0000:00:02.0 irq 67 sym2: PA-RISC Firmware, ID 7, Fast-20, SE, parity checking sym2: SCSI BUS has been reset. scsi2 : sym-2.2.1 Vendor: HP Model: DVD-ROM 305 Rev: 1.01 Type: CD-ROM ANSI SCSI revision: 02 target2:0:1: Beginning Domain Validation target2:0:1: asynchronous. target2:0:1: Domain Validation skipping write tests target2:0:1: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) target2:0:1: Ending Domain Validation sym3: <875> rev 0x14 at pci 0000:00:02.1 irq 68 sym3: PA-RISC Firmware, ID 15, Fast-20, SE, parity checking sym3: SCSI BUS has been reset. scsi3 : sym-2.2.1 sym4: <895> rev 0x2 at pci 0000:20:00.0 irq 71 sym4: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking sym4: SCSI BUS has been reset. scsi4 : sym-2.2.1 st: Version 20050312, fixed bufsize 32768, s/g segs 256 SCSI device sda: 35566480 512-byte hdwr sectors (18210 MB) SCSI device sda: drive cache: write back SCSI device sda: 35566480 512-byte hdwr sectors (18210 MB) SCSI device sda: drive cache: write back /dev/scsi/host0/bus0/target8/lun0: p1 p2 p3 p4 Attached scsi disk sda at scsi0, channel 0, id 8, lun 0 sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi2, channel 0, id 1, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 8, lun 0, type 0 Attached scsi generic sg1 at scsi2, channel 0, id 1, lun 0, type 5 usbmon: debugs is not available ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 80 td 96 usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP: routing cache hash table of 16384 buckets, 128Kbytes TCP established hash table entries: 524288 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 524288 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 10 Disabled Privacy Extensions on device 000000001069e6f0(lo) IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Freeing unused kernel memory: 436k freed VFS: Can't find ext3 filesystem on dev sr0. VFS: Can't find an ext2 filesystem on dev sr0. SQUASHFS error: Can't find a SQUASHFS superblock on sr0 ISO 9660 Extensions: Microsoft Joliet Level 3 Unable to load NLS charset iso8859-15 Unable to load NLS charset iso8859-15 ISO 9660 Extensions: RRIP_1991A Linux Tulip driver version 1.1.13 (December 15, 2004) tulip0: no phy info, aborting mtable build tulip0: MII transceiver #1 config 1000 status 782d advertising 0061. eth0: Digital DS21142/DS21143 Tulip rev 65 at 8000000000000080, 00:30:6E:0C:F9:5D, IRQ 65. eth0: Setting full-duplex based on MII#1 link partner capability of 41e1. eth0: no IPv6 routers present Adding 500728k swap on /dev/sda3. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on sda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. sd 0:0:8:0: phase change 2-7 10@02ae0368 resid=9. end_request: I/O error, dev sda, sector 3754560 Buffer I/O error on device sda4, logical block 327752 lost page write due to I/O error on sda4 Buffer I/O error on device sda4, logical block 327753 lost page write due to I/O error on sda4
(In reply to comment #1) > Please include the output of: > emerge info > cat /proc/mounts > ls -ld /var /var/tmp /var/tmp/portage > Thanks for the quick help. I apologize for the Neanderthal writing above. Basically, I am having write errors it seems on /dev/sda4 (my / partition) after any error. i checked dmesg, and sure enough, there is a /dev/sda4 error. weirdly, e2fsck says its good, and i have installed on this disk before, i can try another one if this doesn
(In reply to comment #1) > Please include the output of: > emerge info > cat /proc/mounts > ls -ld /var /var/tmp /var/tmp/portage > Thanks for the quick help. I apologize for the Neanderthal writing above. Basically, I am having write errors it seems on /dev/sda4 (my / partition) after any error. i checked dmesg, and sure enough, there is a /dev/sda4 error. weirdly, e2fsck says its good, and i have installed on this disk before, i can try another one if this doesnt fix it.) here is that emerge info you requested. the cat /proc/mounts will be after it, along with the ls -ld /var /var/tmp /var/tmp/portage thanks! (chroot) livecd / # emerge info Portage 2.0.51.22-r2 (default-linux/hppa/2005.0, gcc-3.3.5, glibc-2.3.4.20040808-r1, 2.6.12.2-pa2-livecd64 parisc64) ================================================================= System uname: 2.6.12.2-pa2-livecd64 parisc64 PA8600 (PCX-W+) Gentoo Base System version 1.6.12 dev-lang/python: 2.3.5 sys-apps/sandbox: 1.2.11 sys-devel/autoconf: 2.13, 2.59-r6 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.5 sys-devel/binutils: 2.15.92.0.2-r10 sys-devel/libtool: 1.5.18-r1 virtual/os-headers: 2.6.11-r2 ACCEPT_KEYWORDS="hppa" AUTOCLEAN="yes" CBUILD="hppa2.0-unknown-linux-gnu" CFLAGS="-O2 -pipe -march=2.0 -mschedule=8000 -fomit-frame-pointer" CHOST="hppa2.0-unknown-linux-gnu" CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3/share/config /usr/share/config /var/qmail/control" CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d" CXXFLAGS="-O2 -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="autoconfig distlocks sandbox sfperms strict" GENTOO_MIRRORS="http://gentoo.osuosl.org/ ftp://distro.ibiblio.org/pub/linux/distributions/gentoo/ http://distro.ibiblio.org/pub/linux/distributions/gentoo/ ftp://ftp.gtlib.gatech.edu/pub/gentoo" MAKEOPTS="-j3" PKGDIR="/usr/portage/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" SYNC="rsync://rsync.us.gentoo.org/gentoo-portage" USE="hppa berkdb bitmap-fonts bzip2 crypt cups expat foomaticdb fortran gdbm gpm imlib ipv6 libwww ncurses nls pam perl pic python readline spell ssl tcpd truetype-fonts type1-fonts udev xml2 zlib userland_GNU kernel_linux elibc_glibc" Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTDIR_OVERLAY ________________________________________________________________________________ (chroot) livecd / # cat /proc/mounts rootfs / rootfs rw 0 0 tmpfs /newroot tmpfs rw 0 0 /dev/cdroms/cdrom0 /newroot/mnt/cdrom iso9660 ro 0 0 /dev/loop/0 /newroot/mnt/livecd squashfs ro 0 0 proc /newroot/proc proc rw,nodiratime 0 0 sysfs /newroot/sys sysfs rw 0 0 udev /newroot/dev tmpfs rw,nosuid 0 0 devpts /newroot/dev/pts devpts rw 0 0 tmpfs /newroot/mnt/livecd/lib/firmware tmpfs rw 0 0 tmpfs /newroot/mnt/livecd/usr/portage tmpfs rw 0 0 /dev/sda4 / ext3 rw 0 0 /dev/sda2 /boot ext3 rw 0 0 none /proc proc rw,nodiratime 0 0 udev /dev tmpfs rw,nosuid 0 0 ________________________________________________________________ (chroot) livecd / # ls -ld /var /var/tmp /var/tmp/portage drwxr-xr-x 12 root root 4096 Mar 22 18:27 /var drwxrwxrwt 3 root root 4096 Mar 22 20:10 /var/tmp drwxrwxr-x 5 portage portage 4096 Mar 22 20:25 /var/tmp/portage
not a userspace issue
(In reply to comment #5) > not a userspace issue > so what then, close it and not notify anyone? i dont even know what that means, all i know is it occurs when i emerge, with either the 2006 live cd, or the 2005.1. only during the initial emerge, or any other subsequent. i have tried ext2, etx3, and now reiser. what do you suggest? thanks
(In reply to comment #6) > (In reply to comment #5) > > not a userspace issue > > > > so what then, close it and not notify anyone? i dont even know what that > means, all i know is it occurs when i emerge, with either the 2006 live cd, or > the 2005.1. > > only during the initial emerge, or any other subsequent. i have tried ext2, > etx3, and now reiser. what do you suggest? > > thanks > heres the most current dmesg. HighMem zone: 0 pages, LIFO batch:0 Built 1 zonelists Kernel command line: TERM=linux root=/dev/ram0 init=/linuxrc cdroot looptype=sq uashfs loop=/image.squashfs hda=scsi hdb=scsi console=ttyS0 palo_kernel=0/vmlinu x64 ide_setup: hda=scsi ide_setup: hdb=scsi PID hash table entries: 4096 (order: 12, 131072 bytes) Console: colour dummy device 160x64 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Memory: 2097152k available Calibrating delay loop... 1093.63 BogoMIPS (lpj=546816) Mount-cache hash table entries: 256 checking if image is initramfs... it is NET: Registered protocol family 16 EISA bus registered Searching for devices... Found devices: 1. Crescendo 550 at 0xfffffffffffa0000 [160] { 0, 0x0, 0x5d5, 0x00004 } 2. Crescendo 550 at 0xfffffffffffa2000 [162] { 0, 0x0, 0x5d5, 0x00004 } 3. Memory at 0xfffffffffed08000 [8] { 1, 0x0, 0x09b, 0x00009 } 4. Astro BC Runway Port at 0xfffffffffed00000 [0] { 12, 0x0, 0x582, 0x0000b } 5. Elroy PCI Bridge at 0xfffffffffed30000 [0/0] { 13, 0x0, 0x782, 0x0000a } 6. Elroy PCI Bridge at 0xfffffffffed34000 [0/2] { 13, 0x0, 0x782, 0x0000a } 7. Elroy PCI Bridge at 0xfffffffffed38000 [0/4] { 13, 0x0, 0x782, 0x0000a } 8. Elroy PCI Bridge at 0xfffffffffed3c000 [0/6] { 13, 0x0, 0x782, 0x0000a } Enabling PDC_PAT chassis codes support. CONFIG_SMP=n ignoring additional CPUs CPU: probe of 162 failed with error 1 CPU(s): 1 x PA8600 (PCX-W+) at 550.000000 MHz Whole cache flush 329376 cycles, flushing 6774200 bytes 1107894 cycles Setting cache flush threshold to 1ebb40 (1 CPUs online) SBA found Astro 2.1 at 0xfffffffffed00000 LBA version TR4.0 (0x5) found at 0xfffffffffed30000 LBA version TR4.0 (0x5) found at 0xfffffffffed34000 LBA version TR4.0 (0x5) found at 0xfffffffffed38000 LBA version TR4.0 (0x5) found at 0xfffffffffed3c000 SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub unwind_init: start = 0x10528ce0, end = 0x10556c50, entries = 11767 Performance monitoring counters enabled for Crescendo 550 Squashfs 2.1 (released 2004/12/10) (C) 2002-2004 Phillip Lougher Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered PDC Stable Storage facility v0.22 Soft power switch support not available. STI GSC/PCI core graphics driver Version 0.9a Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 0000:00:04.0: ttyS0 at MMIO 0xfffffffff8000000 (irq = 69) is a 16550A 0000:00:04.0: ttyS1 at MMIO 0xfffffffff8000008 (irq = 69) is a 16550A 0000:00:04.0: ttyS2 at MMIO 0xfffffffff8000010 (irq = 69) is a 16550A 0000:00:05.0: ttyS3 at MMIO 0xfffffffff8006000 (irq = 70) is a 16550A Couldn't register serial port 0000:00:05.0: -28 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx sym0: <896> rev 0x7 at pci 0000:00:01.0 irq 66 sym0: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking sym0: SCSI BUS has been reset. scsi0 : sym-2.2.2 Vendor: HP 18.2G Model: ST318406LC Rev: HP03 Type: Direct-Access ANSI SCSI revision: 02 target0:0:8: tagged command queuing enabled, command queue depth 16. target0:0:8: Beginning Domain Validation target0:0:8: asynchronous. target0:0:8: wide asynchronous. target0:0:8: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 31) target0:0:8: Domain Validation skipping write tests target0:0:8: Ending Domain Validation sym1: <896> rev 0x7 at pci 0000:00:01.1 irq 67 sym1: PA-RISC Firmware, ID 15, Fast-40, SE, parity checking sym1: SCSI BUS has been reset. scsi1 : sym-2.2.2 sym2: <875> rev 0x14 at pci 0000:00:02.0 irq 67 sym2: PA-RISC Firmware, ID 7, Fast-20, SE, parity checking sym2: SCSI BUS has been reset. scsi2 : sym-2.2.2 Vendor: HP Model: DVD-ROM 305 Rev: 1.01 Type: CD-ROM ANSI SCSI revision: 02 target2:0:1: Beginning Domain Validation target2:0:1: asynchronous. target2:0:1: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) target2:0:1: Domain Validation skipping write tests target2:0:1: Ending Domain Validation sym3: <875> rev 0x14 at pci 0000:00:02.1 irq 68 sym3: PA-RISC Firmware, ID 15, Fast-20, SE, parity checking sym3: SCSI BUS has been reset. scsi3 : sym-2.2.2 sym4: <895> rev 0x2 at pci 0000:20:00.0 irq 71 sym4: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking sym4: SCSI BUS has been reset. scsi4 : sym-2.2.2 st: Version 20050830, fixed bufsize 32768, s/g segs 256 SCSI device sda: 35566480 512-byte hdwr sectors (18210 MB) SCSI device sda: drive cache: write back SCSI device sda: 35566480 512-byte hdwr sectors (18210 MB) SCSI device sda: drive cache: write back sda: unknown partition table sd 0:0:8:0: Attached scsi disk sda sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:1:0: Attached scsi CD-ROM sr0 sd 0:0:8:0: Attached scsi generic sg0 type 0 sr 2:0:1:0: Attached scsi generic sg1 type 5 usbmon: debugfs is not available ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 80 td 96 usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Freeing unused kernel memory: 412k freed VFS: Can't find ext3 filesystem on dev sr0. VFS: Can't find an ext2 filesystem on dev sr0. SQUASHFS error: Can't find a SQUASHFS superblock on sr0 ISO 9660 Extensions: Microsoft Joliet Level 3 Unable to load NLS charset iso8859-15 Unable to load NLS charset iso8859-15 ISO 9660 Extensions: RRIP_1991A Linux Tulip driver version 1.1.13 (December 15, 2004) tulip0: no phy info, aborting mtable build tulip0: MII transceiver #1 config 1000 status 782d advertising 0061. eth0: Digital DS21142/DS21143 Tulip rev 65 at 8000000000000080, 00:30:6E:0C:F9:5 D, IRQ 65. 0000:00:00.0: tulip_stop_rxtx() failed (CSR5 0xf0660000 CSR6 0xb24e2202) eth0: Setting full-duplex based on MII#1 link partner capability of 41e1. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: Setting full-duplex based on MII#1 link partner capability of 41e1. eth0: no IPv6 routers present SCSI device sda: 35566480 512-byte hdwr sectors (18210 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 SCSI device sda: 35566480 512-byte hdwr sectors (18210 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 sd 0:0:8:0: phase change 2-7 10@00200f60 resid=9. end_request: I/O error, dev sda, sector 69984 sd 0:0:8:0: phase change 2-7 6@00200f60 resid=5. end_request: I/O error, dev sda, sector 71040 sd 0:0:8:0: phase change 2-7 6@00200f60 resid=5. end_request: I/O error, dev sda, sector 73048 sd 0:0:8:0: phase change 2-7 6@00200f60 resid=5. end_request: I/O error, dev sda, sector 73792 Adding 750584k swap on /dev/sda3. Priority:-1 extents:1 across:750584k ReiserFS: sda4: found reiserfs format "3.6" with standard journal ReiserFS: sda4: using ordered data mode ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda4: checking transaction log (sda4) ReiserFS: sda4: Using r5 hash to sort names ReiserFS: sda4: warning: Created .reiserfs_priv on sda4 - reserved for xattr sto rage. kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. sd 0:0:8:0: ABORT operation started. sd 0:0:8:0: ABORT operation timed-out. sd 0:0:8:0: ABORT operation started. sd 0:0:8:0: ABORT operation timed-out. sd 0:0:8:0: ABORT operation started. sd 0:0:8:0: ABORT operation timed-out. sd 0:0:8:0: ABORT operation started. sd 0:0:8:0: ABORT operation timed-out. sd 0:0:8:0: ABORT operation started. sd 0:0:8:0: ABORT operation timed-out. sd 0:0:8:0: ABORT operation started. sd 0:0:8:0: ABORT operation timed-out. sd 0:0:8:0: ABORT operation started. sd 0:0:8:0: ABORT operation timed-out. sd 0:0:8:0: ABORT operation started. sd 0:0:8:0: ABORT operation timed-out. sd 0:0:8:0: ABORT operation started. sd 0:0:8:0: ABORT operation timed-out. sd 0:0:8:0: ABORT operation started. sd 0:0:8:0: ABORT operation timed-out. sd 0:0:8:0: ABORT operation started. sd 0:0:8:0: ABORT operation timed-out. sd 0:0:8:0: ABORT operation started. sd 0:0:8:0: ABORT operation timed-out. sd 0:0:8:0: ABORT operation started. sd 0:0:8:0: ABORT operation timed-out. sd 0:0:8:0: ABORT operation started. sd 0:0:8:0: ABORT operation timed-out. sd 0:0:8:0: ABORT operation started. sd 0:0:8:0: ABORT operation timed-out. sd 0:0:8:0: ABORT operation started. sd 0:0:8:0: ABORT operation timed-out. sd 0:0:8:0: DEVICE RESET operation started. sd 0:0:8:0: DEVICE RESET operation timed-out. sd 0:0:8:0: BUS RESET operation started. sym0: SCSI BUS reset detected. sym0: SCSI BUS has been reset. sd 0:0:8:0: BUS RESET operation complete. sd 0:0:8:0: SCSI error: return code = 0x70000 end_request: I/O error, dev sda, sector 1648376 Buffer I/O error on device sda4, logical block 2015 lost page write due to I/O error on sda4 REISERFS: abort (device sda4): Journal write error in flush_commit_list REISERFS: Aborting journal for filesystem on sda4 livecd ~ #
well either it's sucky hardware (nothing we can do about it) or it's the kernel scsi driver
(In reply to comment #8) > well either it's sucky hardware (nothing we can do about it) or it's the kernel > scsi driver > Good to go, i will look into that scsi driver. who do i report this to?? unfortunately, i am new to this. sorry for any inconvience.
before you report anything, you should try the latest kernel (2.6.16_p0)
(In reply to comment #10) > before you report anything, you should try the latest kernel (2.6.16_p0) > Thanks Spanky. I'll do. I am uncertain where to get that though, I have tried a build, to two a day, and mine keeps getting 2.6.15-pa4. I'll look into that, I am about to do an emerge hppa-sources, let's see if its in there today.
(In reply to comment #10) > before you report anything, you should try the latest kernel (2.6.16_p0) > also, I just finished that new emerge hppa-sources, and it gave me /hppa-sources-2.6.15.4_p4. I am unsure how to get that 2.6.16_p0. I can only assuem you are referring to X86, not the HPPA2.0 arch. thanks
