Hi, I can't remember since what version exactly, but it's no more possible to keep on key down and see the effect repeated. I explain myself : by exemple, before, holding down the right arrow made mplayer fast forward, just as with a VCR. Now, if i hold down the key, it just go up one frame, and i've got to repeat the key to make it "manually fast forward". I've got the same problem for all the shortcuts (sound, subtitles, moving into the film, etc.). I'm on a gentoo 1.4, with gcc 3.2, and my mplayer is 0.90pre10. But i think the problem comes from before. I'm ready to test any stuff if needed. Regards, Guillaume.
Have you checked on the mplayer lists ? Works fine here btw ... In console, or X. USE flags ?
More precisions : I'm running mplayer in console. I found out that usng -vo x11 works (i can fast forward by holding the arrows down), but using -vo dga i've got the problem described (only able to go frame by frame). I'm using an nvidia GeForce4 Ti 4200 with nvidia-kernel-1.0.3123-r1 and nvidia-glx-1.0.3123 on a Gentoo 1.4 with gcc3.2. I didn't found anything about this problem on the net and I can't figure out what is happening (and it worked, like 2 months ago ...). Below is the output of mplayer. mplayer -vo dga -ao oss /mnt/xp/g/videos/americ~1.avi Using GNU internationalization Original domain: messages Original dirname: /usr/share/locale Current domain: mplayer Current dirname: /usr/share/locale MPlayer 0.90pre10-3.2.1 (C) 2000-2002 Arpad Gereoffy (see DOCS) CPU: Intel Pentium 4 Xeon Foster (Family: 8, Stepping: 2) CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2 Reading /root/.mplayer/codecs.conf: can't open '/root/.mplayer/codecs.conf': No such file or directory Reading /usr/share/mplayer/codecs.conf: 44 audio & 110 video codecs init_freetype Failed to open /dev/rtc: No such file or directory (mplayer should be setuid root or /dev/rtc should be readable by the user.) Using usleep() timing Can't open input config file /root/.mplayer/input.conf : No such file or directory Input config file /usr/share/mplayer/input.conf parsed : 50 binds Playing /mnt/xp/g/videos/americ~1.avi Cache fill: 0.00% (0 bytes) Detected AVI file format! VIDEO: [DIV3] 640x368 24bpp 25.00 fps 635.6 kbps (77.6 kbyte/s) ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 8010->176400 (64.1 kbit) Selected audio codec: [ffwmav2] afm:ffmpeg (DivX audio v2 (ffmpeg)) ========================================================================== vo: X11 running at 1600x1200 with depth 24 and 32 bpp (":0" => local display) vo_dga: Mode: depth=15, bpp=16, r=007c00, g=0003e0, b=00001f, native (fast), (-bpp 15) vo_dga: Mode: depth=16, bpp=16, r=00f800, g=0007e0, b=00001f, native (fast), (-bpp 16) vo_dga: Mode: depth=24, bpp=24, r=ff0000, g=00ff00, b=0000ff, conversion (slow), (-bpp 24) vo_dga: Mode: depth=24, bpp=32, r=ff0000, g=00ff00, b=0000ff, native (fast), (-bpp 32) ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family Selected video codec: [ffdivx] vfm:ffmpeg (FFmpeg DivX ;-) (MS MPEG-4 v3)) ========================================================================== AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit... Start playing... VDec: vo config request - 640 x 368 (preferred csp: Planar YV12) VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is undefined - no prescaling applied. VO: [dga] 640x368 => 640x368 Planar YV12 [fs] vo_dga: DGA 2.0 available :-) Can switch resolution AND depth! vo_dga: Selected hardware mode 640 x 480 @ 85 Hz @ depth 24, bitspp 32. vo_dga: Video parameters by codec: 640 x 368, depth 24, bitspp 32. vo_dga: Aspect corrected size for SwScaler: 640 x 368. Using MMX2 for colorspace transform SwScaler: using unscaled Planar YV12 -> BGR 32-bit special converter A: 430.5 V: 430.5 A-V: -0.026 ct: 0.026 10764/10764 19% 16% 1.6% 0 0 49% Exiting... (Quit)
Please try mplayer-0.90_rc1.
same problem ...
Well, rc2 is out. Still working here. What about trying to change keyboard mappings ?
Still working here with rc4. Mind to test and comment ?
rc5 is stable submit a new bug or reopen if still fails
