Now that fuse has been accepted into mainline kernel, we no longer should depend on sys-fs/fuse but something more general (virtual/kernel or something). It's just like the alsa-driver case...
Well, we depend on alsa-lib instead of alsa-dirver, but in the fuse case, fuse contains the userspace libraries necessary to mount fuse filesystems and thus we should depend on fuse.
*** Bug 120395 has been marked as a duplicate of this bug. ***
sshfs-fuse depend from sys-fs/fuse, but my kernel 2.6.15 support it. How to emerge ssfs-fuse w/o sys-fs/fuse?
libfuse depends :( Ok, then i should remove from /lib/modules/.../fs/fuse.ko after install sys-fs/fuse?
Does it really get installed when you already have the support in kernel? I also use the in-kernel fuse module and sys-fs/fuse detects it and installs inly the library...
That functionality was broken for a while, it was always building the module regardless of whether it was present in-kernel. That is fixed again now.
Yes, module compiled in kernel, but fuse-2.4.1-r1 has been try compile module. :( On my servers (w/o module support) more poor, fuse wasn't compile (error about missed module support). I'm fix it (--disable-kernel-module or something in ebuild).
Please run "emerge --sync" and then attach full output from a session of "emerge fuse" where the FUSE module is already present on the system (i.e. it is provided by the kernel).
wrote 560 bytes read 3216058 bytes 64982.18 bytes/sec total size is 112086474 speedup is 34.85 >>> Updating Portage cache: 100% dds ~ # emerge -C fuse sys-fs/fuse selected: 2.4.1-r1 protected: none omitted: none >>> 'Selected' packages are slated for removal. >>> 'Protected' and 'omitted' packages will not be removed. >>> Waiting 5 seconds before starting... >>> (Control-C to abort)... >>> Unmerging in: 5 4 3 2 1 >>> Unmerging sys-fs/fuse-2.4.1-r1... No package files given... Grabbing a set. <<< obj /usr/share/doc/fuse-2.4.1-r1/how-fuse-works.gz <<< obj /usr/share/doc/fuse-2.4.1-r1/example/null.c.gz <<< obj /usr/share/doc/fuse-2.4.1-r1/example/hello_ll.c.gz <<< obj /usr/share/doc/fuse-2.4.1-r1/example/hello.c.gz <<< obj /usr/share/doc/fuse-2.4.1-r1/example/fusexmp_fh.c.gz <<< obj /usr/share/doc/fuse-2.4.1-r1/example/fusexmp.c.gz <<< obj /usr/share/doc/fuse-2.4.1-r1/example/Makefile.in.gz <<< obj /usr/share/doc/fuse-2.4.1-r1/example/Makefile.gz <<< obj /usr/share/doc/fuse-2.4.1-r1/example/Makefile.am.gz <<< obj /usr/share/doc/fuse-2.4.1-r1/README.gz <<< obj /usr/share/doc/fuse-2.4.1-r1/README.NFS.gz <<< obj /usr/share/doc/fuse-2.4.1-r1/README-2.4.gz <<< obj /usr/share/doc/fuse-2.4.1-r1/NEWS.gz <<< obj /usr/share/doc/fuse-2.4.1-r1/Filesystems.gz <<< obj /usr/share/doc/fuse-2.4.1-r1/ChangeLog.gz <<< obj /usr/share/doc/fuse-2.4.1-r1/AUTHORS.gz <<< obj /usr/lib/pkgconfig/fuse.pc <<< obj /usr/lib/libfuse.so.2.4.1 <<< obj /usr/lib/libfuse.la <<< obj /usr/lib/libfuse.a <<< obj /usr/include/fuse/fuse_lowlevel.h <<< obj /usr/include/fuse/fuse_compat.h <<< obj /usr/include/fuse/fuse_common.h <<< obj /usr/include/fuse/fuse.h <<< obj /usr/include/fuse.h <<< obj /usr/bin/fusermount <<< obj /sbin/mount.fuse --- !found obj /lib/modules/2.6.15-gentoo-r1/fs/fuse.ko --- !found dir /lib/modules/2.6.15-gentoo-r1/fs --- cfgpro dir /lib/modules/2.6.15-gentoo-r1 --- cfgpro obj /etc/udev/rules.d/40-fuse.rules --- cfgpro dir /etc/udev/rules.d --- cfgpro dir /etc/udev <<< sym /usr/lib/libfuse.so.2 <<< sym /usr/lib/libfuse.so <<< dir /usr/share/doc/fuse-2.4.1-r1/example <<< dir /usr/share/doc/fuse-2.4.1-r1 <<< dir /usr/include/fuse --- !empty dir /usr/share/doc --- !empty dir /usr/share --- !empty dir /usr/lib/pkgconfig --- !empty dir /usr/lib --- !empty dir /usr/include --- !empty dir /usr/bin --- !empty dir /usr --- !empty dir /sbin --- !empty dir /lib/modules --- !empty dir /lib --- !empty dir /etc --- !empty dir /dev * Removing sys-fs/fuse-2.4.1-r1 from moduledb. >>> Regenerating /etc/ld.so.cache... * GNU info directory index is up-to-date. dds ~ # cat /proc/filesystems nodev sysfs nodev rootfs nodev bdev nodev proc nodev sockfs nodev usbfs nodev pipefs nodev futexfs nodev tmpfs nodev inotifyfs nodev eventpollfs nodev devpts reiserfs ext3 ext2 nodev ramfs iso9660 nodev fuse nodev mqueue dds ~ # emerge -v sys-fs/fuse Calculating dependencies ...done! >>> emerge (1 of 1) sys-fs/fuse-2.4.1-r1 to / >>> md5 files ;-) fuse-2.4.2.ebuild >>> md5 files ;-) fuse-2.5.0.ebuild >>> md5 files ;-) fuse-2.4.1-r1.ebuild >>> md5 files ;-) fuse-2.5.0-r1.ebuild >>> md5 files ;-) files/fusermount.patch >>> md5 files ;-) files/fuse-2.6.16.patch >>> md5 files ;-) files/fuse-fix-lazy-binding.patch >>> md5 files ;-) files/digest-fuse-2.4.2 >>> md5 files ;-) files/digest-fuse-2.5.0 >>> md5 files ;-) files/fuse-fix-memleak.patch >>> md5 files ;-) files/digest-fuse-2.4.1-r1 >>> md5 files ;-) files/digest-fuse-2.5.0-r1 >>> md5 src_uri ;-) fuse-2.4.1.tar.gz * Determining the location of the kernel source code * Found kernel source directory: * /usr/src/linux * Found sources for kernel version: * 2.6.15-gentoo-r1 >>> Unpacking source... >>> Unpacking fuse-2.4.1.tar.gz to /var/tmp/portage/fuse-2.4.1-r1/work * Applying fuse-fix-lazy-binding.patch ... [ ok ] * Applying fusermount.patch ... [ ok ] >>> Source unpacked. * Preparing fuse userland * econf: updating fuse-2.4.1/config.guess with /usr/share/gnuconfig/config.guess * econf: updating fuse-2.4.1/config.sub with /usr/share/gnuconfig/config.sub ./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-kernel-module --disable-example --build=i686-pc-linux-gnu checking for a BSD-compatible install... /bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for style of include used by make... GNU checking for i686-pc-linux-gnu-gcc... i686-pc-linux-gnu-gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether i686-pc-linux-gnu-gcc accepts -g... yes checking for i686-pc-linux-gnu-gcc option to accept ANSI C... none needed checking dependency style of i686-pc-linux-gnu-gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for egrep... grep -E checking for ld used by i686-pc-linux-gnu-gcc... /usr/i686-pc-linux-gnu/bin/ld checking if the linker (/usr/i686-pc-linux-gnu/bin/ld) is GNU ld... yes checking for /usr/i686-pc-linux-gnu/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/i686-pc-linux-gnu-nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking for i686-pc-linux-gnu-ar... i686-pc-linux-gnu-ar checking for i686-pc-linux-gnu-strip... i686-pc-linux-gnu-strip checking for i686-pc-linux-gnu-ranlib... i686-pc-linux-gnu-ranlib checking the maximum length of command line arguments... 32768 checking command to parse /usr/bin/i686-pc-linux-gnu-nm -B output from object... ok checking how to run the C preprocessor... i686-pc-linux-gnu-gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if i686-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no checking for i686-pc-linux-gnu-gcc option to produce PIC... -fPIC -DPIC checking if i686-pc-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes checking if i686-pc-linux-gnu-gcc static flag -static works... yes checking if i686-pc-linux-gnu-gcc supports -c -o file.o... yes checking whether the i686-pc-linux-gnu-gcc linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for i686-pc-linux-gnu-gcc... (cached) i686-pc-linux-gnu-gcc checking whether we are using the GNU C compiler... (cached) yes checking whether i686-pc-linux-gnu-gcc accepts -g... (cached) yes checking for i686-pc-linux-gnu-gcc option to accept ANSI C... (cached) none needed checking dependency style of i686-pc-linux-gnu-gcc... (cached) gcc3 checking for fork... yes checking for setxattr... yes checking for struct stat.st_atim... yes configure: creating ./config.status config.status: creating fuse.pc config.status: creating Makefile config.status: creating lib/Makefile config.status: creating util/Makefile config.status: creating example/Makefile config.status: creating include/Makefile config.status: creating include/config.h config.status: executing depfiles commands config.status: executing libtool commands Making all in include make[1]: Entering directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/include' make all-am make[2]: Entering directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/include' make[2]: Цель `all-am' не требует выполнения команд. make[2]: Leaving directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/include' make[1]: Leaving directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/include' Making all in lib make[1]: Entering directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/lib' if /bin/sh ../libtool --mode=compile i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse.lo -MD -MP -MF ".deps/fuse.Tpo" -c -o fuse.lo fuse.c; \ then mv -f ".deps/fuse.Tpo" ".deps/fuse.Plo"; else rm -f ".deps/fuse.Tpo"; exit 1; fi if /bin/sh ../libtool --mode=compile i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_kern_chan.lo -MD -MP -MF ".deps/fuse_kern_chan.Tpo" -c -o fuse_kern_chan.lo fuse_kern_chan.c; \ then mv -f ".deps/fuse_kern_chan.Tpo" ".deps/fuse_kern_chan.Plo"; else rm -f ".deps/fuse_kern_chan.Tpo"; exit 1; fi if /bin/sh ../libtool --mode=compile i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_loop.lo -MD -MP -MF ".deps/fuse_loop.Tpo" -c -o fuse_loop.lo fuse_loop.c; \ then mv -f ".deps/fuse_loop.Tpo" ".deps/fuse_loop.Plo"; else rm -f ".deps/fuse_loop.Tpo"; exit 1; fi mkdir .libs i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse.lo -MD -MP -MF .deps/fuse.Tpo -c fuse.c -fPIC -DPIC -o .libs/fuse.o i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_kern_chan.lo -MD -MP -MF .deps/fuse_kern_chan.Tpo -c fuse_kern_chan.c -fPIC -DPIC -o .libs/fuse_kern_chan.o i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_loop.lo -MD -MP -MF .deps/fuse_loop.Tpo -c fuse_loop.c -fPIC -DPIC -o .libs/fuse_loop.o i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_loop.lo -MD -MP -MF .deps/fuse_loop.Tpo -c fuse_loop.c -o fuse_loop.o >/dev/null 2>&1 i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_kern_chan.lo -MD -MP -MF .deps/fuse_kern_chan.Tpo -c fuse_kern_chan.c -o fuse_kern_chan.o >/dev/null 2>&1 if /bin/sh ../libtool --mode=compile i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_loop_mt.lo -MD -MP -MF ".deps/fuse_loop_mt.Tpo" -c -o fuse_loop_mt.lo fuse_loop_mt.c; \ then mv -f ".deps/fuse_loop_mt.Tpo" ".deps/fuse_loop_mt.Plo"; else rm -f ".deps/fuse_loop_mt.Tpo"; exit 1; fi i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse.lo -MD -MP -MF .deps/fuse.Tpo -c fuse.c -o fuse.o >/dev/null 2>&1 if /bin/sh ../libtool --mode=compile i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_lowlevel.lo -MD -MP -MF ".deps/fuse_lowlevel.Tpo" -c -o fuse_lowlevel.lo fuse_lowlevel.c; \ then mv -f ".deps/fuse_lowlevel.Tpo" ".deps/fuse_lowlevel.Plo"; else rm -f ".deps/fuse_lowlevel.Tpo"; exit 1; fi if /bin/sh ../libtool --mode=compile i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_mt.lo -MD -MP -MF ".deps/fuse_mt.Tpo" -c -o fuse_mt.lo fuse_mt.c; \ then mv -f ".deps/fuse_mt.Tpo" ".deps/fuse_mt.Plo"; else rm -f ".deps/fuse_mt.Tpo"; exit 1; fi i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_loop_mt.lo -MD -MP -MF .deps/fuse_loop_mt.Tpo -c fuse_loop_mt.c -fPIC -DPIC -o .libs/fuse_loop_mt.o i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_lowlevel.lo -MD -MP -MF .deps/fuse_lowlevel.Tpo -c fuse_lowlevel.c -fPIC -DPIC -o .libs/fuse_lowlevel.o i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_mt.lo -MD -MP -MF .deps/fuse_mt.Tpo -c fuse_mt.c -fPIC -DPIC -o .libs/fuse_mt.o i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_loop_mt.lo -MD -MP -MF .deps/fuse_loop_mt.Tpo -c fuse_loop_mt.c -o fuse_loop_mt.o >/dev/null 2>&1 i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_lowlevel.lo -MD -MP -MF .deps/fuse_lowlevel.Tpo -c fuse_lowlevel.c -o fuse_lowlevel.o >/dev/null 2>&1 i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_mt.lo -MD -MP -MF .deps/fuse_mt.Tpo -c fuse_mt.c -o fuse_mt.o >/dev/null 2>&1 if /bin/sh ../libtool --mode=compile i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_session.lo -MD -MP -MF ".deps/fuse_session.Tpo" -c -o fuse_session.lo fuse_session.c; \ then mv -f ".deps/fuse_session.Tpo" ".deps/fuse_session.Plo"; else rm -f ".deps/fuse_session.Tpo"; exit 1; fi if /bin/sh ../libtool --mode=compile i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT helper.lo -MD -MP -MF ".deps/helper.Tpo" -c -o helper.lo helper.c; \ then mv -f ".deps/helper.Tpo" ".deps/helper.Plo"; else rm -f ".deps/helper.Tpo"; exit 1; fi if /bin/sh ../libtool --mode=compile i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT mount.lo -MD -MP -MF ".deps/mount.Tpo" -c -o mount.lo mount.c; \ then mv -f ".deps/mount.Tpo" ".deps/mount.Plo"; else rm -f ".deps/mount.Tpo"; exit 1; fi i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_session.lo -MD -MP -MF .deps/fuse_session.Tpo -c fuse_session.c -fPIC -DPIC -o .libs/fuse_session.o i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT helper.lo -MD -MP -MF .deps/helper.Tpo -c helper.c -fPIC -DPIC -o .libs/helper.o i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fuse_session.lo -MD -MP -MF .deps/fuse_session.Tpo -c fuse_session.c -o fuse_session.o >/dev/null 2>&1 i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT helper.lo -MD -MP -MF .deps/helper.Tpo -c helper.c -o helper.o >/dev/null 2>&1 i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT mount.lo -MD -MP -MF .deps/mount.Tpo -c mount.c -fPIC -DPIC -o .libs/mount.o i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT mount.lo -MD -MP -MF .deps/mount.Tpo -c mount.c -o mount.o >/dev/null 2>&1 /bin/sh ../libtool --mode=link i686-pc-linux-gnu-gcc -march=pentium4 -O2 -pipe -fomit-frame-pointer -o libfuse.la -rpath /usr/lib -lpthread -version-number 2:4:1 -Wl,--version-script,fuse_versionscript fuse.lo fuse_kern_chan.lo fuse_loop.lo fuse_loop_mt.lo fuse_lowlevel.lo fuse_mt.lo fuse_session.lo helper.lo mount.lo i686-pc-linux-gnu-gcc -shared .libs/fuse.o .libs/fuse_kern_chan.o .libs/fuse_loop.o .libs/fuse_loop_mt.o .libs/fuse_lowlevel.o .libs/fuse_mt.o .libs/fuse_session.o .libs/helper.o .libs/mount.o -lpthread -march=pentium4 -Wl,--version-script -Wl,fuse_versionscript -Wl,-soname -Wl,libfuse.so.2 -o .libs/libfuse.so.2.4.1 (cd .libs && rm -f libfuse.so.2 && ln -s libfuse.so.2.4.1 libfuse.so.2) (cd .libs && rm -f libfuse.so && ln -s libfuse.so.2.4.1 libfuse.so) i686-pc-linux-gnu-ar cru .libs/libfuse.a fuse.o fuse_kern_chan.o fuse_loop.o fuse_loop_mt.o fuse_lowlevel.o fuse_mt.o fuse_session.o helper.o mount.o i686-pc-linux-gnu-ranlib .libs/libfuse.a creating libfuse.la (cd .libs && rm -f libfuse.la && ln -s ../libfuse.la libfuse.la) make[1]: Leaving directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/lib' Making all in util make[1]: Entering directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/util' if i686-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../include -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=22 -Wl,-z,now -march=pentium4 -O2 -pipe -fomit-frame-pointer -MT fusermount.o -MD -MP -MF ".deps/fusermount.Tpo" -c -o fusermount.o fusermount.c; \ then mv -f ".deps/fusermount.Tpo" ".deps/fusermount.Po"; else rm -f ".deps/fusermount.Tpo"; exit 1; fi i686-pc-linux-gnu-gcc: -z: linker input file unused because linking not done i686-pc-linux-gnu-gcc: now: linker input file unused because linking not done i686-pc-linux-gnu-gcc: -z: linker input file unused because linking not done i686-pc-linux-gnu-gcc: now: linker input file unused because linking not done /bin/sh ../libtool --mode=link i686-pc-linux-gnu-gcc -Wl,-z,now -march=pentium4 -O2 -pipe -fomit-frame-pointer -o fusermount fusermount.o mkdir .libs i686-pc-linux-gnu-gcc -Wl,-z -Wl,now -march=pentium4 -O2 -pipe -fomit-frame-pointer -o fusermount fusermount.o make[1]: Leaving directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/util' make[1]: Entering directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1' make[1]: Цель `all-am' не требует выполнения команд. make[1]: Leaving directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1' * Converting fuse-2.4.1/kernel/Makefile.in to use M= instead of SUBDIRS= ... [ ok ] * Preparing fuse module * econf: updating fuse-2.4.1/config.guess with /usr/share/gnuconfig/config.guess * econf: updating fuse-2.4.1/config.sub with /usr/share/gnuconfig/config.sub ./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --with-kernel=/usr/src/linux --enable-kernel-module --build=i686-pc-linux-gnu checking for a BSD-compatible install... /bin/install -c checking kernel source directory... /usr/src/linux checking kernel source version... 2.6.15-gentoo-r1 checking if FUSE is configured in the kernel... yes checking if kernel has extended attribute support... yes checking if this is user mode linux... no configure: creating ./config.status config.status: creating Makefile config.status: creating config.h make -C /usr/src/linux M=/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/kernel modules make[1]: Entering directory `/usr/src/linux-2.6.15-gentoo-r1' CC [M] /var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/kernel/dev.o CC [M] /var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/kernel/dir.o CC [M] /var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/kernel/file.o CC [M] /var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/kernel/inode.o LD [M] /var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/kernel/fuse.o Building modules, stage 2. MODPOST CC /var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/kernel/fuse.mod.o LD [M] /var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/kernel/fuse.ko make[1]: Leaving directory `/usr/src/linux-2.6.15-gentoo-r1' >>> Test phase [not enabled]: sys-fs/fuse-2.4.1-r1 >>> Install fuse-2.4.1-r1 into /var/tmp/portage/fuse-2.4.1-r1/image/ category sys-fs Making install in include make[1]: Entering directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/include' make[2]: Entering directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/include' make[2]: Цель `install-exec-am' не требует выполнения команд. test -z "/usr/include/fuse" || mkdir -p -- "/var/tmp/portage/fuse-2.4.1-r1/image//usr/include/fuse" /bin/install -c -m 644 'fuse.h' '/var/tmp/portage/fuse-2.4.1-r1/image//usr/include/fuse/fuse.h' /bin/install -c -m 644 'fuse_compat.h' '/var/tmp/portage/fuse-2.4.1-r1/image//usr/include/fuse/fuse_compat.h' /bin/install -c -m 644 'fuse_common.h' '/var/tmp/portage/fuse-2.4.1-r1/image//usr/include/fuse/fuse_common.h' /bin/install -c -m 644 'fuse_lowlevel.h' '/var/tmp/portage/fuse-2.4.1-r1/image//usr/include/fuse/fuse_lowlevel.h' test -z "/usr/include" || mkdir -p -- "/var/tmp/portage/fuse-2.4.1-r1/image//usr/include" /bin/install -c -m 644 'old/fuse.h' '/var/tmp/portage/fuse-2.4.1-r1/image//usr/include/fuse.h' make[2]: Leaving directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/include' make[1]: Leaving directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/include' Making install in lib make[1]: Entering directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/lib' make[2]: Entering directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/lib' test -z "/usr/lib" || mkdir -p -- "/var/tmp/portage/fuse-2.4.1-r1/image//usr/lib" /bin/sh ../libtool --mode=install /bin/install -c 'libfuse.la' '/var/tmp/portage/fuse-2.4.1-r1/image//usr/lib/libfuse.la' /bin/install -c .libs/libfuse.so.2.4.1 /var/tmp/portage/fuse-2.4.1-r1/image//usr/lib/libfuse.so.2.4.1 (cd /var/tmp/portage/fuse-2.4.1-r1/image//usr/lib && rm -f libfuse.so.2 && ln -s libfuse.so.2.4.1 libfuse.so.2) (cd /var/tmp/portage/fuse-2.4.1-r1/image//usr/lib && rm -f libfuse.so && ln -s libfuse.so.2.4.1 libfuse.so) /bin/install -c .libs/libfuse.lai /var/tmp/portage/fuse-2.4.1-r1/image//usr/lib/libfuse.la /bin/install -c .libs/libfuse.a /var/tmp/portage/fuse-2.4.1-r1/image//usr/lib/libfuse.a i686-pc-linux-gnu-ranlib /var/tmp/portage/fuse-2.4.1-r1/image//usr/lib/libfuse.a chmod 644 /var/tmp/portage/fuse-2.4.1-r1/image//usr/lib/libfuse.a libtool: install: warning: remember to run `libtool --finish /usr/lib' make[2]: Цель `install-data-am' не требует выполнения команд. make[2]: Leaving directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/lib' make[1]: Leaving directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/lib' Making install in util make[1]: Entering directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/util' make[2]: Entering directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/util' test -z "/usr/bin" || mkdir -p -- "/var/tmp/portage/fuse-2.4.1-r1/image//usr/bin" /bin/sh ../libtool --mode=install /bin/install -c 'fusermount' '/var/tmp/portage/fuse-2.4.1-r1/image//usr/bin/fusermount' /bin/install -c fusermount /var/tmp/portage/fuse-2.4.1-r1/image//usr/bin/fusermount mkdir -p -- /var/tmp/portage/fuse-2.4.1-r1/image//sbin /bin/install -c ./mount.fuse /var/tmp/portage/fuse-2.4.1-r1/image//sbin/mount.fuse make install-exec-hook make[3]: Entering directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/util' chown root /var/tmp/portage/fuse-2.4.1-r1/image//usr/bin/fusermount chmod u+s /var/tmp/portage/fuse-2.4.1-r1/image//usr/bin/fusermount mknod /var/tmp/portage/fuse-2.4.1-r1/image//dev/fuse -m 0666 c 10 229 make[3]: Leaving directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/util' mkdir -p -- /var/tmp/portage/fuse-2.4.1-r1/image//etc/udev/rules.d /bin/install -c -m 644 ./udev.rules /var/tmp/portage/fuse-2.4.1-r1/image//etc/udev/rules.d/40-fuse.rules make[2]: Leaving directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/util' make[1]: Leaving directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1/util' make[1]: Entering directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1' make[2]: Entering directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1' make[2]: Цель `install-exec-am' не требует выполнения команд. test -z "/usr/lib/pkgconfig" || mkdir -p -- "/var/tmp/portage/fuse-2.4.1-r1/image//usr/lib/pkgconfig" /bin/install -c -m 644 'fuse.pc' '/var/tmp/portage/fuse-2.4.1-r1/image//usr/lib/pkgconfig/fuse.pc' make[2]: Leaving directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1' make[1]: Leaving directory `/var/tmp/portage/fuse-2.4.1-r1/work/fuse-2.4.1' * Installing fuse module man: prepallstrip: strip: i686-pc-linux-gnu-strip --strip-unneeded usr/bin/fusermount usr/lib/libfuse.so.2.4.1 making executable: /usr/lib/libfuse.so.2.4.1 >>> Completed installing fuse-2.4.1-r1 into /var/tmp/portage/fuse-2.4.1-r1/image/ >>> Merging sys-fs/fuse-2.4.1-r1 to / * >>> SetUID: [chmod go-r] /var/tmp/portage/fuse-2.4.1-r1/image//usr/bin/fusermount ... [ ok ] --- /dev/ !!! /dev/fuse --- /etc/ --- /etc/udev/ --- /etc/udev/rules.d/ >>> /etc/udev/rules.d/40-fuse.rules --- /lib/ --- /lib/modules/ --- /lib/modules/2.6.15-gentoo-r1/ >>> /lib/modules/2.6.15-gentoo-r1/fs/ >>> /lib/modules/2.6.15-gentoo-r1/fs/fuse.ko --- /usr/ --- /usr/bin/ >>> /usr/bin/fusermount --- /usr/lib/ >>> /usr/lib/libfuse.a >>> /usr/lib/libfuse.la --- /usr/lib/pkgconfig/ >>> /usr/lib/pkgconfig/fuse.pc >>> /usr/lib/libfuse.so.2.4.1 --- /usr/share/ --- /usr/share/doc/ >>> /usr/share/doc/fuse-2.4.1-r1/ >>> /usr/share/doc/fuse-2.4.1-r1/README-2.4.gz >>> /usr/share/doc/fuse-2.4.1-r1/README.gz >>> /usr/share/doc/fuse-2.4.1-r1/how-fuse-works.gz >>> /usr/share/doc/fuse-2.4.1-r1/NEWS.gz >>> /usr/share/doc/fuse-2.4.1-r1/example/ >>> /usr/share/doc/fuse-2.4.1-r1/example/fusexmp_fh.c.gz >>> /usr/share/doc/fuse-2.4.1-r1/example/fusexmp.c.gz >>> /usr/share/doc/fuse-2.4.1-r1/example/Makefile.gz >>> /usr/share/doc/fuse-2.4.1-r1/example/hello_ll.c.gz >>> /usr/share/doc/fuse-2.4.1-r1/example/hello.c.gz >>> /usr/share/doc/fuse-2.4.1-r1/example/null.c.gz >>> /usr/share/doc/fuse-2.4.1-r1/example/Makefile.am.gz >>> /usr/share/doc/fuse-2.4.1-r1/example/Makefile.in.gz >>> /usr/share/doc/fuse-2.4.1-r1/Filesystems.gz >>> /usr/share/doc/fuse-2.4.1-r1/AUTHORS.gz >>> /usr/share/doc/fuse-2.4.1-r1/README.NFS.gz >>> /usr/share/doc/fuse-2.4.1-r1/ChangeLog.gz --- /usr/include/ >>> /usr/include/fuse/ >>> /usr/include/fuse/fuse.h >>> /usr/include/fuse/fuse_common.h >>> /usr/include/fuse/fuse_compat.h >>> /usr/include/fuse/fuse_lowlevel.h >>> /usr/include/fuse.h --- /sbin/ >>> /sbin/mount.fuse >>> /usr/lib/libfuse.so -> libfuse.so.2.4.1 >>> /usr/lib/libfuse.so.2 -> libfuse.so.2.4.1 * Updating module dependencies for 2.6.15-gentoo-r1 ... [ ok ] * Adding module to moduledb. >>> Regenerating /etc/ld.so.cache... >>> sys-fs/fuse-2.4.1-r1 merged. >>> Recording sys-fs/fuse in "world" favorites file... >>> clean: No packages selected for removal. >>> Auto-cleaning packages ... >>> No outdated packages were found on your system. * GNU info directory index is up-to-date. dds ~ #
Ah, you need to use 2.4.2 or higher for the build-on-demand stuff. (In future, please use the attachment feature for large pastes)
Is possible, to stablezing 2.4.2 in portage tree?
in kernel with FUSE, but w/o support modules: emerge -v sys-fs/fuse Calculating dependencies ...done! >>> emerge (1 of 1) sys-fs/fuse-2.5.0-r1 to / >>> md5 files ;-) fuse-2.4.2.ebuild >>> md5 files ;-) fuse-2.5.0.ebuild >>> md5 files ;-) fuse-2.4.1-r1.ebuild >>> md5 files ;-) fuse-2.5.0-r1.ebuild >>> md5 files ;-) files/fusermount.patch >>> md5 files ;-) files/fuse-2.6.16.patch >>> md5 files ;-) files/fuse-fix-lazy-binding.patch >>> md5 files ;-) files/digest-fuse-2.4.2 >>> md5 files ;-) files/digest-fuse-2.5.0 >>> md5 files ;-) files/fuse-fix-memleak.patch >>> md5 files ;-) files/digest-fuse-2.4.1-r1 >>> md5 files ;-) files/digest-fuse-2.5.0-r1 >>> md5 src_uri ;-) fuse-2.5.0.tar.gz * Determining the location of the kernel source code * Found kernel source directory: * /usr/src/linux * Found sources for kernel version: * 2.6.14-hardened-r3 * Checking for suitable kernel configuration options: * We have detected FUSE already built into the kernel. We will continue, but we wont build the module this time. * Please check to make sure these options are set correctly. * Failure to do so may cause unexpected problems. * These sources do not support loading external modules. * to be able to use this module please enable "Loadable modules support" * in your kernel, recompile and then try merging this module again. !!! ERROR: sys-fs/fuse-2.5.0-r1 failed. !!! Function check_modules_supported, Line 373, Exitcode 0 !!! No support for external modules in 2.6.14-hardened-r3 config !!! If you need support, post the topmost build error, NOT this status message. Loadable modules must be support? :-( )
