./apcupsd start * Starting APC UPS daemon... NISIP Parsing error at line 125 of config file /etc/apcupsd/apcupsd.conf. EVENTSFILEMAX Parsing error at line 144 of config file /etc/apcupsd/apcupsd.conf. Terminating due to configuration file errors. [ !! ] apcupsd.conf states this: # # NISIP <dotted notation ip address> # IP address on which NIS server will listen for incoming connections. # Default value is 0.0.0.0 that means any incoming request will be # serviced but if you want it to listen to a single subnet you can # set it up to that subnet address, for example 192.168.10.0 # Additionally you can listen for a single IP like 192.168.10.1 NISIP 192.168.0.0 # # NISPORT <port> default is 7000 # port to use for sending STATUS and EVENTS data over the network. # It is not used unless NETSERVER is on. If you change this port, # you will need to change the corresponding value in the cgi directory # and rebuild the cgi programs. NISPORT 7000 # # If you want the last few EVENTS to be available over the network # by the network information server, you must define an EVENTSFILE. EVENTSFILE /var/log/apcupsd.events # # EVENTSFILEMAX <kilobytes> # By default, the size of the EVENTSFILE will be not be allowed to exceed # 10 kilobytes. When the file grows beyond this limit, older EVENTS will # be removed from the beginning of the file (first in first out). The # parameter EVENTSFILEMAX can be set to a different kilobyte value, or set # to zero to allow the EVENTSFILE to grow without limit. EVENTSFILEMAX 10 #
Sorry, my fault...
