all revisions of rtorrent (http://libtorrent.rakshasa.no/) after r1040 fail with a segmentation faul, what happens when compiling dht_manager.cc Reproducible: Always Steps to Reproduce: 1. svn co -r 1041 svn://rakshasa.no/libtorrent/trunk/ 2. cd libtorrent && ./autogen && ./configure && make && make install && cd ../rtorrent 3. ./autogen && ./configure 4. make here's, what i could figure out: r1040, and older works fine, any newer rev fail with the same error on the same place it's the same with or without the xmlrpc-c support i also tried to use a custom ebuild, to have the same environment as other ebuilds, but the error happened that time too using the custom ebuild or the make, it does not throw segfault, it start eating up all the memory and the swapfile, until all of it is gone, and a few second later compiling stops with the following: make all-recursive make[1]: Entering directory `/usr/local/src/libtorrent/trunk/rtorrent' Making all in doc make[2]: Entering directory `/usr/local/src/libtorrent/trunk/rtorrent/doc' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/usr/local/src/libtorrent/trunk/rtorrent/doc' Making all in src make[2]: Entering directory `/usr/local/src/libtorrent/trunk/rtorrent/src' Making all in core make[3]: Entering directory `/usr/local/src/libtorrent/trunk/rtorrent/src/core' g++ -DHAVE_CONFIG_H -I. -I../.. -I. -I./.. -I../.. -O2 -Wall -g -DDEBUG -I/usr/local/include -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include -MT curl_get.o -MD -MP -MF .deps/curl_get.Tpo -c -o curl_get.o curl_get.cc mv -f .deps/curl_get.Tpo .deps/curl_get.Po g++ -DHAVE_CONFIG_H -I. -I../.. -I. -I./.. -I../.. -O2 -Wall -g -DDEBUG -I/usr/local/include -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include -MT curl_stack.o -MD -MP -MF .deps/curl_stack.Tpo -c -o curl_stack.o curl_stack.cc mv -f .deps/curl_stack.Tpo .deps/curl_stack.Po g++ -DHAVE_CONFIG_H -I. -I../.. -I. -I./.. -I../.. -O2 -Wall -g -DDEBUG -I/usr/local/include -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include -MT dht_manager.o -MD -MP -MF .deps/dht_manager.Tpo -c -o dht_manager.o dht_manager.cc g++: Internal error: Killed (program cc1plus) Please submit a full bug report. See <URL:http://bugs.gentoo.org/> for instructions. make[3]: *** [dht_manager.o] Error 1 make[3]: Leaving directory `/usr/local/src/libtorrent/trunk/rtorrent/src/core' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/usr/local/src/libtorrent/trunk/rtorrent/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/usr/local/src/libtorrent/trunk/rtorrent' make: *** [all] Error 2 when compiling the single file with the next command (just like make): g++ -DHAVE_CONFIG_H -I. -I../.. -I. -I./.. -I../.. -O2 -Wall -g -DDEBUG -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -MT dht_manager.o -MD -MP -MF .deps/dht_manager.Tpo -c -o dht_manager.o dht_manager.cc i get the segmentation fault message: g++: Internal error: Segmentation fault (program cc1plus) Please submit a full bug report. See <URL:http://bugs.gentoo.org/> for instructions. i'm using gcc version 3.4.6 (Gentoo Hardened 3.4.6-r2 p1.5, ssp-3.4.6-1.0, pie-8.7.10) Configured with: /var/tmp/portage/sys-devel/gcc-3.4.6-r2/work/gcc-3.4.6/configure --prefix=/usr --bindir=/usr/i686-pc-linux-gnu/gcc-bin/3.4.6 --includedir=/usr/lib/gcc/i686-pc-linux-gnu/3.4.6/include --datadir=/usr/share/gcc-data/i686-pc-linux-gnu/3.4.6 --mandir=/usr/share/gcc-data/i686-pc-linux-gnu/3.4.6/man --infodir=/usr/share/gcc-data/i686-pc-linux-gnu/3.4.6/info --with-gxx-include-dir=/usr/lib/gcc/i686-pc-linux-gnu/3.4.6/include/g++-v3 --host=i686-pc-linux-gnu --build=i686-pc-linux-gnu --disable-altivec --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --enable-secureplt --disable-libunwind-exceptions --disable-multilib --disable-libgcj --with-arch=i686 --enable-languages=c,c++,treelang,f77 --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --with-bugurl=http://bugs.gentoo.org/ --with-pkgversion=Gentoo Hardened 3.4.6-r2 p1.5, ssp-3.4.6-1.0, pie-8.7.10 Thread model: posix my system is a hardened gentoo and my kernel is 2.6.23-hardened-r7 the computer is a Pentium III (450/512/100/2V) in a BH6 with 224MB of ram, and 1GB of swap
Same here. Looks like cc1plus consumes all available memory and in the end gets killed.. To me looks like some bug get triggered in gcc..
The segmentation fault issue when compiling dht_manager.cc appears to be resolved in rtorrent-0.8.2. The problem now is the behavior described by commentor #1, which is not the same. There is a new bug for that - bug 224031.
(In reply to comment #2) > The segmentation fault issue when compiling dht_manager.cc appears to be > resolved in rtorrent-0.8.2. The problem now is the behavior described by > commentor #1, which is not the same. There is a new bug for that - bug 224031. > please read the full description as i mentioned, when i'm using an ebuild, or just a make command, the same happens to me, what is described in bug 224031 segfault only appears, when i try to compile dht_manager.cc on it's own
(In reply to comment #3) > (In reply to comment #2) > > The segmentation fault issue when compiling dht_manager.cc appears to be > > resolved in rtorrent-0.8.2. The problem now is the behavior described by > > commentor #1, which is not the same. There is a new bug for that - bug 224031. > > > > please read the full description > as i mentioned, when i'm using an ebuild, or just a make command, the same > happens to me, what is described in bug 224031 > segfault only appears, when i try to compile dht_manager.cc on it's own > No, I reproduced your segfault on dht_manager.cc building the SVN version. Afaics it is fixed in net-p2p/rtorrent-0.8.2. The build process gets through the dht_manager.cc step just fine. There is a new problem now - bug 224031, which I have also reproduced and is not the same problem as described in this bug. If I am wrong, and net-p2p/rtorrent-0.8.2 is still segfaulting on the dht_manager.cc step for you - please post your emerge --info and build.log for net-p2p/rtorrent-0.8.2 in its entirety. Thanks.
(In reply to comment #4) > (In reply to comment #3) > > (In reply to comment #2) > > > The segmentation fault issue when compiling dht_manager.cc appears to be > > > resolved in rtorrent-0.8.2. The problem now is the behavior described by > > > commentor #1, which is not the same. There is a new bug for that - bug 224031. > > > > > > > please read the full description > > as i mentioned, when i'm using an ebuild, or just a make command, the same > > happens to me, what is described in bug 224031 > > segfault only appears, when i try to compile dht_manager.cc on it's own > > > > No, I reproduced your segfault on dht_manager.cc building the SVN version. > Afaics it is fixed in net-p2p/rtorrent-0.8.2. The build process gets through > the dht_manager.cc step just fine. There is a new problem now - bug 224031, > which I have also reproduced and is not the same problem as described in this > bug. If I am wrong, and net-p2p/rtorrent-0.8.2 is still segfaulting on the > dht_manager.cc step for you - please post your emerge --info and build.log for > net-p2p/rtorrent-0.8.2 in its entirety. Thanks. > since my english is far from perfect, i might have been hard to understand at some point so, when i'm using an abuild i get the following: i686-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../.. -I. -I./.. -I../.. -O2 -march=i686 -pipe -fno-strict-aliasing -DNDEBUG -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include -c -o curl_stack.o curl_stack.cc i686-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../.. -I. -I./.. -I../.. -O2 -march=i686 -pipe -fno-strict-aliasing -DNDEBUG -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include -c -o dht_manager.o dht_manager.cc i686-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../.. -I. -I./.. -I../.. -O2 -march=i686 -pipe -fno-strict-aliasing -DNDEBUG -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include -c -o download.o download.cc i686-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../.. -I. -I./.. -I../.. -O2 -march=i686 -pipe -fno-strict-aliasing -DNDEBUG -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include -c -o download_factory.o download_factory.cc i686-pc-linux-gnu-g++: Internal error: Killed (program cc1plus) Please submit a full bug report. See <URL:http://bugs.gentoo.org/> for instructions. make[3]: *** [dht_manager.o] Error 1 make[3]: *** Waiting for unfinished jobs.... i686-pc-linux-gnu-g++: Internal error: Killed (program cc1plus) Please submit a full bug report. See <URL:http://bugs.gentoo.org/> for instructions. make[3]: *** [download_factory.o] Error 1 i686-pc-linux-gnu-g++: Internal error: Killed (program cc1plus) Please submit a full bug report. See <URL:http://bugs.gentoo.org/> for instructions. make[3]: *** [download.o] Error 1 make[3]: Leaving directory `/var/tmp/portage/net-p2p/rtorrent-0.8.2/work/rtorrent-0.8.2/src/core' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/var/tmp/portage/net-p2p/rtorrent-0.8.2/work/rtorrent-0.8.2/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/net-p2p/rtorrent-0.8.2/work/rtorrent-0.8.2' make: *** [all] Error 2 * * ERROR: net-p2p/rtorrent-0.8.2 failed. * Call stack: * ebuild.sh, line 49: Called src_compile * environment, line 2328: Called die * The specific snippet of code: * emake || die "emake failed" * The die message: * emake failed * * If you need support, post the topmost build error, and the call stack if relevant. * The ebuild environment file is located at '/var/tmp/portage/net-p2p/rtorrent-0.8.2/temp/environment'. * * Messages for package net-p2p/rtorrent-0.8.2: * * ERROR: net-p2p/rtorrent-0.8.2 failed. * Call stack: * ebuild.sh, line 49: Called src_compile * environment, line 2328: Called die * The specific snippet of code: * emake || die "emake failed" * The die message: * emake failed * * If you need support, post the topmost build error, and the call stack if relevant. * The ebuild environment file is located at '/var/tmp/portage/net-p2p/rtorrent-0.8.2/temp/environment'. * * GNU info directory index is up-to-date. i think, the reason emerge gets through the dht_manager.cc file, is the "-j3" option in my make.conf after this error occures, if i go to /var/tmp/portage/net-p2p/rtorrent-0.8.2/work/rtorrent-0.8.2/src/core, segfault still happens on this command: i686-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../.. -I. -I./.. -I../.. -O2 -march=i686 -pipe -fno-strict-aliasing -DNDEBUG -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include -c -o dht_manager.o dht_manager.cc this is the same command, what the ebuild executes emerge --info Portage 2.1.4.4 (selinux/2007.0/x86/hardened, gcc-3.4.6, glibc-2.6.1-r0, 2.6.23-hardened-r11 i686) ================================================================= System uname: 2.6.23-hardened-r11 i686 Pentium III (Katmai) Timestamp of tree: Fri, 30 May 2008 18:15:01 +0000 app-shells/bash: 3.2_p33 dev-lang/python: 2.4.4-r9 dev-python/pycrypto: 2.0.1-r6 sys-apps/baselayout: 1.12.11.1 sys-apps/sandbox: 1.2.18.1-r2 sys-devel/autoconf: 2.61-r1 sys-devel/automake: 1.4_p6, 1.10.1 sys-devel/binutils: 2.18-r1 sys-devel/gcc-config: 1.4.0-r4 sys-devel/libtool: 1.5.26 virtual/os-headers: 2.6.23-r3 ACCEPT_KEYWORDS="x86" CBUILD="i686-pc-linux-gnu" CFLAGS="-O2 -march=i686 -pipe" CHOST="i686-pc-linux-gnu" CONFIG_PROTECT="/etc" CONFIG_PROTECT_MASK="/etc/env.d /etc/gconf /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild /etc/terminfo /etc/udev/rules.d" CXXFLAGS="-O2 -march=i686 -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="ccache collision-protect distlocks loadpolicy metadata-transfer parallel-fetch sandbox selinux sesandbox sfperms strict unmerge-orphans userfetch" GENTOO_MIRRORS="ftp://gentoo.inf.elte.hu/" LANG="en_US.UTF-8" MAKEOPTS="-j3" PKGDIR="/usr/portage/packages" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage" USE="apache2 berkdb cli cracklib crypt dri fortran gdbm hardened iconv isdnlog mime mmx mudflap ncurses nls nptl nptlonly openmp pam pcre perl pic posix pppd python readline reflection selinux session slang snmp sockets spl sse ssl symlink tcpd unicode x86 xml xsl zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" USERLAND="GNU" VIDEO_CARDS="apm ark chips cirrus cyrix dummy fbdev glint i128 i740 i810 imstt mach64 mga neomagic nsc nv r128 radeon rendition s3 s3virge savage siliconmotion sis sisusb tdfx tga trident tseng v4l vesa vga via vmware voodoo" Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, LDFLAGS, LINGUAS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS but i can't find any build.log files
*** Bug 224031 has been marked as a duplicate of this bug. ***
(In reply to comment #5) > > since my english is far from perfect, i might have been hard to understand at > some point > so, when i'm using an abuild i get the following: > > i686-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../.. -I. -I./.. -I../.. -O2 > -march=i686 -pipe -fno-strict-aliasing -DNDEBUG -I/usr/include/sigc++-2.0 > -I/usr/lib/sigc++-2.0/include -I/usr/include -c -o curl_stack.o > curl_stack.cc > i686-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../.. -I. -I./.. -I../.. -O2 > -march=i686 -pipe -fno-strict-aliasing -DNDEBUG -I/usr/include/sigc++-2.0 > -I/usr/lib/sigc++-2.0/include -I/usr/include -c -o dht_manager.o > dht_manager.cc > i686-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../.. -I. -I./.. -I../.. -O2 > -march=i686 -pipe -fno-strict-aliasing -DNDEBUG -I/usr/include/sigc++-2.0 > -I/usr/lib/sigc++-2.0/include -I/usr/include -c -o download.o download.cc > i686-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../.. -I. -I./.. -I../.. -O2 > -march=i686 -pipe -fno-strict-aliasing -DNDEBUG -I/usr/include/sigc++-2.0 > -I/usr/lib/sigc++-2.0/include -I/usr/include -c -o download_factory.o > download_factory.cc > i686-pc-linux-gnu-g++: Internal error: Killed (program cc1plus) > Please submit a full bug report. > See <URL:http://bugs.gentoo.org/> for instructions. > make[3]: *** [dht_manager.o] Error 1 > make[3]: *** Waiting for unfinished jobs.... > i686-pc-linux-gnu-g++: Internal error: Killed (program cc1plus) > Please submit a full bug report. > See <URL:http://bugs.gentoo.org/> for instructions. > make[3]: *** [download_factory.o] Error 1 > i686-pc-linux-gnu-g++: Internal error: Killed (program cc1plus) > Please submit a full bug report. > See <URL:http://bugs.gentoo.org/> for instructions. > make[3]: *** [download.o] Error 1 > make[3]: Leaving directory > `/var/tmp/portage/net-p2p/rtorrent-0.8.2/work/rtorrent-0.8.2/src/core' > make[2]: *** [all-recursive] Error 1 > make[2]: Leaving directory > `/var/tmp/portage/net-p2p/rtorrent-0.8.2/work/rtorrent-0.8.2/src' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory > `/var/tmp/portage/net-p2p/rtorrent-0.8.2/work/rtorrent-0.8.2' > make: *** [all] Error 2 > * > * ERROR: net-p2p/rtorrent-0.8.2 failed. > * Call stack: > * ebuild.sh, line 49: Called src_compile > * environment, line 2328: Called die > * The specific snippet of code: > * emake || die "emake failed" > * The die message: > * emake failed > * > * If you need support, post the topmost build error, and the call stack if > relevant. > * The ebuild environment file is located at > '/var/tmp/portage/net-p2p/rtorrent-0.8.2/temp/environment'. > * > > * Messages for package net-p2p/rtorrent-0.8.2: > > * > * ERROR: net-p2p/rtorrent-0.8.2 failed. > * Call stack: > * ebuild.sh, line 49: Called src_compile > * environment, line 2328: Called die > * The specific snippet of code: > * emake || die "emake failed" > * The die message: > * emake failed > * > * If you need support, post the topmost build error, and the call stack if > relevant. > * The ebuild environment file is located at > '/var/tmp/portage/net-p2p/rtorrent-0.8.2/temp/environment'. > * > * GNU info directory index is up-to-date. > > i think, the reason emerge gets through the dht_manager.cc file, is the "-j3" > option in my make.conf > > after this error occures, if i go to > /var/tmp/portage/net-p2p/rtorrent-0.8.2/work/rtorrent-0.8.2/src/core, segfault > still happens on this command: > i686-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I../.. -I. -I./.. -I../.. -O2 > -march=i686 -pipe -fno-strict-aliasing -DNDEBUG -I/usr/include/sigc++-2.0 > -I/usr/lib/sigc++-2.0/include -I/usr/include -c -o dht_manager.o > dht_manager.cc > this is the same command, what the ebuild executes > > > > emerge --info > Portage 2.1.4.4 (selinux/2007.0/x86/hardened, gcc-3.4.6, glibc-2.6.1-r0, > 2.6.23-hardened-r11 i686) > ================================================================= > System uname: 2.6.23-hardened-r11 i686 Pentium III (Katmai) > Timestamp of tree: Fri, 30 May 2008 18:15:01 +0000 > app-shells/bash: 3.2_p33 > dev-lang/python: 2.4.4-r9 > dev-python/pycrypto: 2.0.1-r6 > sys-apps/baselayout: 1.12.11.1 > sys-apps/sandbox: 1.2.18.1-r2 > sys-devel/autoconf: 2.61-r1 > sys-devel/automake: 1.4_p6, 1.10.1 > sys-devel/binutils: 2.18-r1 > sys-devel/gcc-config: 1.4.0-r4 > sys-devel/libtool: 1.5.26 > virtual/os-headers: 2.6.23-r3 > ACCEPT_KEYWORDS="x86" > CBUILD="i686-pc-linux-gnu" > CFLAGS="-O2 -march=i686 -pipe" > CHOST="i686-pc-linux-gnu" > CONFIG_PROTECT="/etc" > CONFIG_PROTECT_MASK="/etc/env.d /etc/gconf /etc/php/apache2-php5/ext-active/ > /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild > /etc/terminfo /etc/udev/rules.d" > CXXFLAGS="-O2 -march=i686 -pipe" > DISTDIR="/usr/portage/distfiles" > FEATURES="ccache collision-protect distlocks loadpolicy metadata-transfer > parallel-fetch sandbox selinux sesandbox sfperms strict unmerge-orphans > userfetch" > GENTOO_MIRRORS="ftp://gentoo.inf.elte.hu/" > LANG="en_US.UTF-8" > MAKEOPTS="-j3" > PKGDIR="/usr/portage/packages" > PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress > --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles > --exclude=/local --exclude=/packages" > PORTAGE_TMPDIR="/var/tmp" > PORTDIR="/usr/portage" > PORTDIR_OVERLAY="/usr/local/portage" > SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage" > USE="apache2 berkdb cli cracklib crypt dri fortran gdbm hardened iconv isdnlog > mime mmx mudflap ncurses nls nptl nptlonly openmp pam pcre perl pic posix pppd > python readline reflection selinux session slang snmp sockets spl sse ssl > symlink tcpd unicode x86 xml xsl zlib" ALSA_CARDS="ali5451 als4000 atiixp > atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 > fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx > via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop > empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw multi > null plug rate route share shm softvol" APACHE2_MODULES="actions alias > auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm > authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache > dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache > filter headers include info log_config logio mem_cache mime mime_magic > negotiation rewrite setenvif speling status unique_id userdir usertrack > vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" > LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses > text" USERLAND="GNU" VIDEO_CARDS="apm ark chips cirrus cyrix dummy fbdev glint > i128 i740 i810 imstt mach64 mga neomagic nsc nv r128 radeon rendition s3 > s3virge savage siliconmotion sis sisusb tdfx tga trident tseng v4l vesa vga via > vmware voodoo" > Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, LDFLAGS, > LINGUAS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS > > > > but i can't find any build.log files > *** This bug has been marked as a duplicate of bug 224031 ***
