The output of dmesg

temp.dmesg.log (text/plain), 12.59 KB, created by Matteo Settenvini on 2004-01-09 07:42:53 UTC

Linux version 2.4.23_pre8-gss-r2 (root@tulip) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #1 ven gen 9 12:20:00 UTC 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000f6f0000 (usable)
 BIOS-e820: 000000000f6f0000 - 000000000f6f8000 (ACPI data)
 BIOS-e820: 000000000f6f8000 - 000000000f6fa000 (ACPI NVS)
 BIOS-e820: 000000000f6fa000 - 0000000010000000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
246MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 63216
zone(0): 4096 pages.
zone(1): 59120 pages.
zone(2): 0 pages.
IBM machine detected. Enabling interrupts during APM calls.
ACPI: RSDP (v002 IBM                                       ) @ 0x000f7330
ACPI: XSDT (v001 IBM    TP-1T    0x00001060  LTP 0x00000000) @ 0x0f6f2447
ACPI: FADT (v002 IBM    TP-1T    0x00001060 IBM  0x00000001) @ 0x0f6f248b
ACPI: SSDT (v001 IBM    TP-1T    0x00001060 MSFT 0x0100000d) @ 0x0f6f253f
ACPI: ECDT (v001 IBM    TP-1T    0x00001060 IBM  0x00000001) @ 0x0f6f7f87
ACPI: BOOT (v001 IBM    TP-1T    0x00001060  LTP 0x00000001) @ 0x0f6f7fd8
ACPI: DSDT (v001 IBM    TP-1T    0x00001060 MSFT 0x0100000d) @ 0x00000000
Kernel command line: BOOT_IMAGE=Gentoo root=305 hdc=ide-scsi
ide_setup: hdc=ide-scsi
No local APIC present or hardware disabled
Initializing CPU#0
Detected 2390.317 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 4771.02 BogoMIPS
Memory: 246480k/252864k available (1742k kernel code, 5996k reserved, 569k data, 124k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU:     After generic, caps: bfebf9ff 00000000 00000000 00000000
CPU:             Common caps: bfebf9ff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([e-mail])
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20031002
PCI: PCI BIOS revision 2.10 entry at 0xfd966, last bus=5
PCI: Using configuration type 1
ACPI: IRQ 9 was Edge Triggered, setting to Level Triggerd
ACPI: Found ECDT
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S3 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 29)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch ([e-mail])
devfs: boot_options: 0x1
vesafb: framebuffer at 0xe0000000, mapped to 0xd001c000, size 6144k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at a5f3:1f5f
vesafb: scrolling: redraw
vesafb: directcolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Real Time Clock Driver v1.10e
Non-volatile memory driver v1.2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio
hda: HITACHI_DK23EA-40B, ATA DISK drive
blk: queue c0398780, I/O limit 4095Mb (mask 0xffffffff)
hdc: UJDA740 DVD/CDRW, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78140160 sectors (40008 MB) w/2048KiB Cache, CHS=5168/240/63, UDMA(100)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 > p4
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Yenta IRQ list 04b8, PCI irq11
Socket status: 30000006
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 521k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:1d.7 to 64
ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2
ehci_hcd 00:1d.7: irq 11, pci mem d063b000
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:1d.7: enabled 64bit PCI DMA
PCI: cache line size of 128 is not supported by device 00:1d.7
ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[e-mail]>
hid-core.c: USB HID support drivers
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,5)) ...
for (ide0(3,5))
ide0(3,5):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... okay
Mounted devfs on /dev
Freeing unused kernel memory: 124k freed
Adding Swap: 498952k swap-space (priority -1)
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU0] (supports C1 C2, 4 throttling states)
ACPI: Thermal Zone [THRM] (52 C)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 195M
agpgart: Detected an Intel(R) 852GM Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xe0000000
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: MATSHITA  Model: UJDA740 DVD/CDRW  Rev: 1.06
  Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,6)) ...
for (ide0(3,6))
ide0(3,6):Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,4)) ...
for (ide0(3,4))
ide0(3,4):Using r5 hash to sort names
Broadcom Gigabit Ethernet Driver bcm5700 with Broadcom NIC Extension (NICE) ver. 7.1.9 (11/03/03)
eth0: Broadcom BCM5901 100Base-TX found at mem d0200000, IRQ 11, node addr 00061bc11af3
eth0: Broadcom BCM5705 Integrated Copper transceiver found
eth0: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON, NAPI ON
slamr: SmartLink AMRMO modem.
slamr: probe 8086:24c6 ICH4 card...
PCI: Setting latency timer of device 00:1f.6 to 64
This driver is not compatible with the installed modem codec.
Please contact your modem provider for support.
slamr: slamr0 is ICH4 card.
Intel 810 + AC97 Audio, version 0.24, 12:25:47 Jan  9 2004
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xd0100c00 and 0xd0100800, IRQ 11
i810: Intel ICH4 mmio at 0xd09c4c00 and 0xd09c6800
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: ADS116 (Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
i810_rng: cannot disable RNG, aborting
i810_rng hardware driver 0.9.8 loaded
usb-uhci.c: $Revision: 1.275 $ time 12:26:08 Jan  9 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0x1840, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0x1860, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:1d.1-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x915/0x2) is not claimed by any active driver.
parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
lp0: using parport0 (polling).
bcm5700: eth0 NIC Link is DOWN
hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }

hda: status timeout: status=0xd0 { Busy }

hda: DMA disabled
hda: drive not ready for command
hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest }
hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hda: set_drive_speed_status: error=0x04 { DriveStatusError }
ide0: reset: master: ECC circuitry error
ehci_hcd 00:1d.7: remove state 3
usb.c: USB disconnect on device 00:1d.7-0 address 1
usb.c: USB bus 1 deregistered
HDLC line discipline: version $Revision: 3.7 $, maxframe=4096
N_HDLC line discipline registered.
usb.c: USB disconnect on device 00:1d.1-2 address 2
hub.c: new USB device 00:1d.1-2, assigned address 3
usb.c: USB device 3 (vend/prod 0x915/0x1) is not claimed by any active driver.
usb.c: USB disconnect on device 00:1d.1-2 address 3
hub.c: new USB device 00:1d.1-2, assigned address 4
usb.c: USB device 4 (vend/prod 0x915/0x2) is not claimed by any active driver.
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
memory : cc308d80
memory : c8e59100
memory : c8e59180
memory : c8e59200
[drm] Initialized i830 1.3.2 20021108 on minor 0: Intel i852GM/i855GM GMCH
[drm] Initialized i830 1.3.2 20021108 on minor 1: Intel i852GM/i855GM GMCH
mtrr: base(0xe0000000) is not aligned on a size(0x300000) boundary
memory : c8e59c80
memory : c8e59b00
memory : c8e59b80
memory : c8e59a00
memory : c8e59a80
cdrom: open failed.
NET4: Linux IPX 0.47 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc.