Linux version 2.4.23_pre8-gss-r2 (root@tulip) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #1 ven gen 9 12:20:00 UTC 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000f6f0000 (usable) BIOS-e820: 000000000f6f0000 - 000000000f6f8000 (ACPI data) BIOS-e820: 000000000f6f8000 - 000000000f6fa000 (ACPI NVS) BIOS-e820: 000000000f6fa000 - 0000000010000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 246MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 63216 zone(0): 4096 pages. zone(1): 59120 pages. zone(2): 0 pages. IBM machine detected. Enabling interrupts during APM calls. ACPI: RSDP (v002 IBM ) @ 0x000f7330 ACPI: XSDT (v001 IBM TP-1T 0x00001060 LTP 0x00000000) @ 0x0f6f2447 ACPI: FADT (v002 IBM TP-1T 0x00001060 IBM 0x00000001) @ 0x0f6f248b ACPI: SSDT (v001 IBM TP-1T 0x00001060 MSFT 0x0100000d) @ 0x0f6f253f ACPI: ECDT (v001 IBM TP-1T 0x00001060 IBM 0x00000001) @ 0x0f6f7f87 ACPI: BOOT (v001 IBM TP-1T 0x00001060 LTP 0x00000001) @ 0x0f6f7fd8 ACPI: DSDT (v001 IBM TP-1T 0x00001060 MSFT 0x0100000d) @ 0x00000000 Kernel command line: BOOT_IMAGE=Gentoo root=305 hdc=ide-scsi ide_setup: hdc=ide-scsi No local APIC present or hardware disabled Initializing CPU#0 Detected 2390.317 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 4771.02 BogoMIPS Memory: 246480k/252864k available (1742k kernel code, 5996k reserved, 569k data, 124k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After generic, caps: bfebf9ff 00000000 00000000 00000000 CPU: Common caps: bfebf9ff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20031002 PCI: PCI BIOS revision 2.10 entry at 0xfd966, last bus=5 PCI: Using configuration type 1 ACPI: IRQ 9 was Edge Triggered, setting to Level Triggerd ACPI: Found ECDT ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S3 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC] (gpe 29) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 vesafb: framebuffer at 0xe0000000, mapped to 0xd001c000, size 6144k vesafb: mode is 1024x768x32, linelength=4096, pages=1 vesafb: protected mode interface info at a5f3:1f5f vesafb: scrolling: redraw vesafb: directcolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled Real Time Clock Driver v1.10e Non-volatile memory driver v1.2 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio hda: HITACHI_DK23EA-40B, ATA DISK drive blk: queue c0398780, I/O limit 4095Mb (mask 0xffffffff) hdc: UJDA740 DVD/CDRW, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 78140160 sectors (40008 MB) w/2048KiB Cache, CHS=5168/240/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 > p4 SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Yenta IRQ list 04b8, PCI irq11 Socket status: 30000006 RAMDISK: Compressed image found at block 0 Freeing initrd memory: 521k freed VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Setting latency timer of device 00:1d.7 to 64 ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2 ehci_hcd 00:1d.7: irq 11, pci mem d063b000 usb.c: new USB bus registered, assigned bus number 1 ehci_hcd 00:1d.7: enabled 64bit PCI DMA PCI: cache line size of 128 is not supported by device 00:1d.7 ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 6 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,5)) ... for (ide0(3,5)) ide0(3,5):Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Trying to move old root to /initrd ... okay Mounted devfs on /dev Freeing unused kernel memory: 124k freed Adding Swap: 498952k swap-space (priority -1) ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU0] (supports C1 C2, 4 throttling states) ACPI: Thermal Zone [THRM] (52 C) Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 195M agpgart: Detected an Intel(R) 852GM Chipset. agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xe0000000 hdc: attached ide-scsi driver. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: MATSHITA Model: UJDA740 DVD/CDRW Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,6)) ... for (ide0(3,6)) ide0(3,6):Using r5 hash to sort names reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,4)) ... for (ide0(3,4)) ide0(3,4):Using r5 hash to sort names Broadcom Gigabit Ethernet Driver bcm5700 with Broadcom NIC Extension (NICE) ver. 7.1.9 (11/03/03) eth0: Broadcom BCM5901 100Base-TX found at mem d0200000, IRQ 11, node addr 00061bc11af3 eth0: Broadcom BCM5705 Integrated Copper transceiver found eth0: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON, NAPI ON slamr: SmartLink AMRMO modem. slamr: probe 8086:24c6 ICH4 card... PCI: Setting latency timer of device 00:1f.6 to 64 This driver is not compatible with the installed modem codec. Please contact your modem provider for support. slamr: slamr0 is ICH4 card. Intel 810 + AC97 Audio, version 0.24, 12:25:47 Jan 9 2004 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xd0100c00 and 0xd0100800, IRQ 11 i810: Intel ICH4 mmio at 0xd09c4c00 and 0xd09c6800 i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Audio codec, id: ADS116 (Unknown) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 i810_rng: cannot disable RNG, aborting i810_rng hardware driver 0.9.8 loaded usb-uhci.c: $Revision: 1.275 $ time 12:26:08 Jan 9 2004 usb-uhci.c: High bandwidth mode enabled PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0x1840, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0x1860, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver hub.c: new USB device 00:1d.1-2, assigned address 2 usb.c: USB device 2 (vend/prod 0x915/0x2) is not claimed by any active driver. parport0: PC-style at 0x3bc [PCSPP,TRISTATE] lp0: using parport0 (polling). bcm5700: eth0 NIC Link is DOWN hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest } hda: status timeout: status=0xd0 { Busy } hda: DMA disabled hda: drive not ready for command hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest } hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hda: set_drive_speed_status: error=0x04 { DriveStatusError } ide0: reset: master: ECC circuitry error ehci_hcd 00:1d.7: remove state 3 usb.c: USB disconnect on device 00:1d.7-0 address 1 usb.c: USB bus 1 deregistered HDLC line discipline: version $Revision: 3.7 $, maxframe=4096 N_HDLC line discipline registered. usb.c: USB disconnect on device 00:1d.1-2 address 2 hub.c: new USB device 00:1d.1-2, assigned address 3 usb.c: USB device 3 (vend/prod 0x915/0x1) is not claimed by any active driver. usb.c: USB disconnect on device 00:1d.1-2 address 3 hub.c: new USB device 00:1d.1-2, assigned address 4 usb.c: USB device 4 (vend/prod 0x915/0x2) is not claimed by any active driver. CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 memory : cc308d80 memory : c8e59100 memory : c8e59180 memory : c8e59200 [drm] Initialized i830 1.3.2 20021108 on minor 0: Intel i852GM/i855GM GMCH [drm] Initialized i830 1.3.2 20021108 on minor 1: Intel i852GM/i855GM GMCH mtrr: base(0xe0000000) is not aligned on a size(0x300000) boundary memory : c8e59c80 memory : c8e59b00 memory : c8e59b80 memory : c8e59a00 memory : c8e59a80 cdrom: open failed. NET4: Linux IPX 0.47 for NET4.0 IPX Portions Copyright (c) 1995 Caldera, Inc. IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc.